Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluation of sequence tracking methods for Compton cameras based on CdZnTe arrays

In this study, the performance of sequence tracking methods for multiple interaction events in specific CdZnTe Compton imagers was evaluated using Monte Carlo simulations. The Compton imager consisted of a 6 × 6 array of virtual Frisch-grid CZT crystals, where the dimensions of each crystal were 5 × 5 × 12 mm 3 . The sequence tracking methods for another Compton imager that consists of two identical CZT crystals arrays were also evaluated. When 662 keV radiation was incident on the detectors, the percentages of the correct sequences determined by the simple comparison and deterministic methods for two sequential interactions were identical (~80 %), while those evaluated using the minimum squared difference method (55-59 %) and Three Compton method (45-55 %) for three sequential interactions, differed from each other. The reconstructed images of a 662 keV point source detected using single and double arrays were evaluated based on their angular resolution and signal-to-noise ratio, and the results showed that the double arrays outperformed single arrays.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Search for rare 3-$α$ decays in the region of the Hoyle state of 12 C

We performed a refined analysis of the data collected with the CHIMERA detector with the aim of searching rare 3-$α$ decay modes near the Hoyle state of 12 C. In particular we investigated the direct and sequential decay modes of the Hoyle state including also the recently suggested Efimov state. The comparison of selected events with simulations constrains the precision achievable with measurements in different experimental conditions. We observe good sensitivities to different decay scenarios also in the CHIMERA spherical region notwithstanding its limited angular resolution. Furthermore, the search for the decay of the Efimov state in 12 C was performed by using new selection strategies as suggested by simulations. The obtained results are not conclusive, however, we are able to exclude the presence of a sequential decay of this state, while our data could be compatible with its direct decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Effects of inter-pulse coupling on nanosecond pulsed high frequency discharge ignition in a flowing mixture

This work numerically investigates the effects of non-equilibrium nanosecond plasma discharge pulse rep- etition frequency, pulse number, and flow velocity on the critical ignition volume, minimum ignition energy, and chemistry in a plasma-assisted H 2 /air flow at 300 K and 1 atm using a multi-scale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC). The interactions between discharges/ignition kernels spanning decoupled, partially-coupled and fully-coupled regimes in a pulse train are studied. For a single pulse discharge, increased flow velocity increases the minimum ignition energy required due to the increase of convective heat loss and flame stretch. The results show that the minimum ignition kernel prop- agation speed at the critical ignition kernel volume increases with the flow velocity. The minimum critical ignition volume decreases with the increase of plasma discharge energy. For sequential two-pulse discharges, ignition fails at both decoupled and partially-coupled regimes even when the total discharge energy is above the minimum ignition energy, but succeeds only in the fully-coupled regime at a shorter inter-pulse time. Overlap of the OH radical pool between the sequential two-pulse discharges and the increase of the chemistry effect due to the increase of reduced electric field in the fully-coupled regime contribute to the ignition enhancement. In addition, for two-pulse discharges in the fully-coupled discharge regime, the mixture can be ignited at a total energy below the minimum ignition energy of a single pulse with the same flow conditions. Moreover, for a given total discharge energy with multiple pulsed discharges, the enhancement of the ignition kernel volume has a non-monotonic dependence on discharge frequency and pulse number. The effective ignition enhancement can be achieved with an optimal pulse repetition frequency and pulse number. Furthermore, this work provides a new understanding of the mechanism for repetitive plasma ignition and insights for the optimization of plasma ignition in a reactive flow.

42 ENGINEERING↗
DOE OSTI2025

From TPL assessment to design optimization: Wave energy converter control co-design applied to the RM3

The Reference Model (RM) project developed six marine energy converter concepts using a sequential design methodology, which, while widely adopted in the industry, often overlooks interactions between system components, resulting in suboptimal designs. One such example is the Reference Model 3 (RM3), a two-body point absorber wave energy converter (WEC). An assessment using the Technology Performance Level (TPL) revealed that RM3’s low power-to-cost ratio, partly due to expensive steel construction, limits its techno-economic performance. Here, this study aims to redesign RM3 by reducing its scale and employing control co-design to integrate WEC and Power Take-Off (PTO) dynamics, constraints, and cost considerations within an optimization framework. We demonstrate the limitations of RM3’s current PTO design and explore the benefits of scaling down to enhance techno-economic viability by lowering material costs. Using WecOptTool, we conduct a parameter sweep over gear ratios and spring stiffnesses for various Commercial Off-The-Shelf generators in irregular wave conditions. Our findings emphasize the importance of aligning PTO components with WEC dynamics, showing that control co-design and strategic scaling can improve RM3’s power-to-cost ratio. This study presents a transferable example of applied control co-design for other WECs, supporting early-stage developers in their design decisions.

Off the shelf components↗
DOE OSTI2020

Organic amendments change soil organic C structure and microbial community but not total organic matter on sub-decadal scales

Organic C has many benefits for soil, but it is depleted by tillage and crop harvest, and especially so for biofuel crops. Accordingly, strategies such as partially retaining stover or planting a cover crop can help ameliorate the negative effect of C removal. We used a long-term field experiment to study the impacts of stover retention and planting cover crop on soil organic matter (SOM), its extractable components and the soil microbial community. SOM chemical composition characterization was determined by electrospray ionization (ESI) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sequential water, methanol (MeOH), and chloroform (CHCl3) extracts. The characteristics of the soil bacterial community were measured by phospholipid fatty acid (PLFA), real-time quantitative PCR, and 16S rRNA gene sequence. The variations in total SOM content, total microbial biomass, and bacterial population were slight among treatments, but SOM chemical compounds, arbuscular mycorrhizal fungi (AMF) biomass, and bacterial structure changed significantly, and especially so in the coupled application of stover retention and cover crop. Specifically, stover retention enriched more lignin-like compounds in soil, whereas cover crop enriched more condensed hydrocarbons, and had more compounds with an aromaticity index (AI) >0.5. The bacterial community was not altered by the cover crop, but the corn stover retention increased the relative abundances of Myxococcales (Deltaproteobacteria) and decreased that of Actinobacteria. Redundancy analysis (RDA) further unveiled that the bacterial community in the stover treatments had significantly positive association with CHCl3-extracted chemical classes, i.e. unsaturated hydrocarbon and lipid with the coupled application (stover and cover crop), and lignin and protein with the single corn stover treatment. Taken together, our study shows how different C addition practices influence the molecular composition of SOM and the structure of soil microbial communities.

Xu, Jiangbin↗
DOE OSTI2025

Discovery, characterization, and application of chromosomal integration sites for stable heterologous gene expression in Rhodotorula toruloides

Rhodotorula toruloides is a non-model, oleaginous yeast uniquely suited to produce acetyl-CoA-derived chemicals. However, the lack of well-characterized genomic integration sites has impeded the metabolic engineering of this organism. Here we report a set of computationally predicted and experimentally validated chromosomal integration sites in R. toruloides. We first implemented an in silico platform by integrating essential gene information and transcriptomic data to identify candidate sites that meet stringent criteria. We then conducted a full experimental characterization of these sites, assessing integration efficiency, gene expression levels, impact on cell growth, and long-term expression stability. Among the identified sites, 12 exhibited integration efficiencies of 50% or higher, making them sufficient for most metabolic engineering applications. Using selected high-efficiency sites, we achieved simultaneous double and triple integrations and efficiently integrated long functional pathways (up to 14.7 kb). Additionally, we developed a new inducible marker recycling system that allows multiple rounds of integration at our characterized sites. Here, we validated this system by performing five sequential rounds of GFP integration and three sequential rounds of MaFAR integration for fatty alcohol production, demonstrating, for the first time, precise gene copy number tuning in R. toruloides. These characterized integration sites should significantly advance metabolic engineering efforts and future genetic tool development in R. toruloides.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Stabilizing a strongly nonlinear structure through shaker dynamics in fixed frequency voltage control tests

Bifurcations are commonly encountered during force controlled swept and stepped sine testing of nonlinear structures, which generally leads to the so-called jump-down or jump-up phenomena between stable solutions. There are various experimental closed-loop control algorithms, such as control-based continuation and phase-locked loop, to stabilize dynamical systems through these bifurcations, but they generally rely on specialized control algorithms that are not readily available with many commercial data acquisition software packages. A recent method was developed to experimentally apply sequential continuation using the shaker voltage that can be readily deployed using commercially available software. By utilizing the stabilizing effects of electrodynamic shakers and the force dropout phenomena in fixed frequency voltage control sine tests, this approach has been demonstrated to stabilize the unstable branch of a nonlinear system with three branches, allowing for three multivalued solutions to be identified within a specific frequency bandwidth near resonance. Recent testing on a strongly nonlinear system with vibro-impact nonlinearity has revealed jumping behavior when performing sequential continuation along the voltage parameter, like the jump phenomena seen during more traditional force controlled swept and stepped sine testing. Here, this paper investigates the stabilizing effects of an electrodynamic shaker on strongly nonlinear structures in fixed frequency voltage control tests using both numerical and experimental methods. The harmonic balance method is applied to the coupled shaker-structure system with an electromechanical model to simulate the fixed voltage control tests and predict the stabilization for different parameters of the model. The simulated results are leveraged to inform the design of a set of experiments to demonstrate the stabilization characteristics on a fixture-pylon assembly with a vibro-impact nonlinearity. Through numerical simulation and experimental testing on two different strongly nonlinear systems, the various parameters that influence the stability of the coupled shaker-structure are revealed to better understand the performance of fixed frequency voltage control tests.

42 ENGINEERING↗
DOE OSTI2024

Synergetic Effects of Soil Organic Matter Components During Interactions with Minerals

Mineral-associated soil organic matter (SOM) is critical for stabilizing organic carbon and mitigating climate change. However, mineral-SOM interactions at the molecular scale, particularly synergetic adsorption through organic-organic interaction on the mineral surface known as organic multilayering, remain poorly understood. This study investigates the impact of organic multilayering on mineral-SOM interactions, by integrating macroscale experiments and molecular-scale simulations that assess the individual and sequential adsorption of major SOM compounds – lauric acid (lipid), pentaglycine (amino acid), trehalose (carbohydrate), and lignin onto soil minerals. Ferrihydrite, Al-hydroxide, and calcite are exposed to SOM compounds to determine adsorption affinities and binding energies. Results show that lauric acid has 20-40 times higher K d than pentaglycine, following the order K d (ferrihydrite) > K d (Al-hydroxide) >> K d (calcite). Molecular-scale simulations confirm that lauric acid has a higher binding energy (30.8 kcal/mol) on ferrihydrite than pentaglycine (6.0 kcal/mol), attributed to lipid hydrophobicity. The lower binding energy of pentaglycine results from its hydrophilic amide groups, facilitating partitioning into water. Sequential experiments examine how the first layer of lipid or amino acid affects the adsorption of carbohydrate/lignin, which show little or no individual adsorption affinities. Macroscale results reveal that lipid and amino acid adsorption induce ferrihydrite particle repulsion increasing reactive surface area and enhancing carbohydrate/lignin adsorption independently and synergistically through organic multilayering. Molecular-scale results reveal that amino acid adsorbed on ferrihydrite interacts more readily with lignin macroaggregates (preformed in solution) than with individual lignin units, indicating organic multilayering via H-bonding. Further, these findings reveal the molecular mechanisms of SOM-mineral interactions, crucial for enhancing soil carbon stabilization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Controlling Preferred Grain Orientation in Vapor-Deposited Metal-Halide Perovskite Thin Films

Metal-halide perovskites are promising semiconductor materials for light-absorber layers in solar cells due to their optimized band gap, defect tolerance, and relative ease of synthesis. In this work, we demonstrate the viability of vapor transport deposition (VTD), a solvent-free processing method, to realize polycrystalline films of both lead iodide (PbI 2 ) and methylammonium lead iodide (MAPbI 3 ) perovskites showing preferential crystallographic orientation. Notable is the difference in perovskite film texturing observed for sequentially and co-deposited VTD films of MAPbI 3 , as well as the lack of strong preferential orientation in solution-processed MAPbI 3 films. While sequential deposition of the perovskite precursors PbI 2 and methylammonium iodide (MAI) leads to a MAPbI 3 film with a limited preferential grain orientation, co-deposited MAPbI 3 films mirror the orientation of excess PbI 2 present in the film. The latter is confirmed by the similar dependence of preferential orientation for PbI 2 and co-deposited MAPbI 3 on underlayer roughness, as well as the emergence of preferential orientation in MAPbI 3 only when excess PbI 2 is present. Both MAPbI 3 and PbI 2 films show a strong preferred lattice orientation on smooth substrates, while on rougher substrates, this orientation is disrupted. Furthermore, these results are interpreted as excess PbI 2 frustrating the diffusion of MAI in the film, which would otherwise disrupt the preferred orientation, pointing to a notable difference in lattice orientation arising from processing technique and conditions.

Deposition↗
DOE OSTI2021

INBOUND APPOINTEE PUBLICATION Importance of Substrate-Particle Repulsion for Protein-Templated Assembly of Metal Nanoparticles

We study the protein-directed assembly of colloidal gold nanoparticles on de novo designed protein nanofiber templates. Using sequential assembly on glass substrates, we attach of positively-charged gold nanoparticles to protein nanofibers engineered to have a high density of negatively-charged surface residues. Using a combination of electron and optical microscopy, we measure the density of particle attachment and characterize binding specificity. By varying nanoparticle size and pH of the solution, we explore the importance of charge-dependent particle-fiber and particle-substrate interactions. We find an inverse correlation between particle size and attachment density to the protein nanofibers, attributed to the balance between size-dependent electrostatic particle-fiber attraction and particle-substrate repulsion. We show pH-dependent particle attachment density and binding specificity in relation to the protonation fraction of each assembly layer. Finally, we employ hyperspectral scattering microscopy to draw conclusions about particle density and interparticle spacings of optically-observable particle assemblies.

Guye, Kathryn N.↗
DOE OSTI2023

Simple Monomers for Precise Polymer Functionalization During Ring-Opening Metathesis Polymerization

Controlling the monomer sequence of synthetic polymers is a grand challenge in polymer science. Conventional sequence control has been achieved in dispersed polymers by exploiting the kinetic tendencies of monomers and their order of addition. While the sequence of blocks in multiblock copolymers can be readily tuned using sequential addition of monomers (SAM), control over the sequence distribution is eroded as the targeted block size approaches a single monomer unit (i.e., X n ~ 1) due to the stochastic nature of chain-growth reactions. Thus, unique monomers are needed to ensure precise single additions. Herein, we investigate common classes of cyclic olefin monomers for ring-opening metathesis polymerization (ROMP) to identify monomers for single unit addition during sequential monomer addition synthesis. Through careful analysis of polymerization kinetics, we find that easily synthesized oxanorbornene imide monomers are suitable for single-addition reactions. With the identified monomers, we demonstrate the synthesis of multiblock copolymers containing up to three precise functionalization sites and singly cross-linked four-armed star copolymers. In conclusion, we envision that expanded kinetic analyses of monomer reactivities in ROMP reactions will enable novel polymer synthesis capabilities such as the autonomous synthesis of sequence-defined polymers or one-shot multiblock copolymer syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Potentiodynamics of the Zinc and Proton Storage in Disordered Sodium Vanadate for Aqueous Zn-Ion Batteries

A rechargeable Zn-ion battery is a promising aqueous system, where coinsertion of Zn 2+ and H + could address the obstacles of the sluggish ionic transport in cathode materials imposed by multivalent battery chemistry. However, there is a lack of fundamental understanding of this dual-ion transport, especially the potentiodynamics of the storage process. Here, a quantitative analysis of Zn 2+ and H + transport in a disordered sodium vanadate (NaV 3 O 8 ) cathode material has been reported. Collectively, synchrotron X-ray analysis shows that both Zn 2+ and H + storages follow an intercalation storage mechanism in NaV 3 O 8 and proceed in a sequential manner, where intercalations of 0.26 Zn 2+ followed by 0.24 H + per vanadium atom occur during discharging, while reverse dynamics happens during charging. We find that such a unique and synergistic dual-ion sequential storage favors a high capacity (265 mA h g –1 ) and an energy density (221 W h kg –1 ) based on the NaV 3 O 8 cathode and a great cycling life (a capacity retention of 78% after 2000 cycles) in Zn/NaV 3 O 8 full cells.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Acetylene Semi-Hydrogenation on a Perovskite Oxyhydride Surface: Insights from First Principles and Microkinetic Modeling

Although perovskite oxyhydrides (POHs) have shown promise as a support for selective hydrogenation, it is unknown if they themselves can catalyze alkyne semi-hydrogenation. Here, we use first-principles density functional theory, coupled with microkinetic modeling, to investigate acetylene semi-hydrogenation on a prototypical POH, cubic BaTiO 2.5 H 0.5 (BTOH). Two different mechanisms are examined on a representative surface of BTOH under the reaction conditions: both are based on the Horiuti–Polanyi mechanism, but the way of H 2 dissociation is different. In mechanism 1, a lattice hydride H atom and then a surface adsorbed H atom sequentially hydrogenate the adsorbed acetylene. In mechanism 2, two lattice hydride H atoms from the BTOH sequentially hydrogenate the adsorbed acetylene. In both mechanisms, the H atoms are replenished from gas phase H 2 dissociation. Using density functional theory (DFT), we have calculated pathways for these two mechanisms in hydrogenation of acetylene to ethylene, as well as further to ethane. Microkinetic modeling based on the DFT energetics indicates that at 523 K, hydrogenation to ethylene and ethane via mechanism 1 occurs at a rate up to two orders of magnitude faster than via mechanism 2. A selectivity analysis for the temperature range of 373–673 K shows that the product observed is essentially only ethylene within the more active mechanism 1. This is because at the steady state, there is a significant amount of surface anion vacancies that facilitate heterolytic H 2 dissociation and help stabilize a vinyl intermediate. In conclusion, the present findings suggest that POHs are capable of selective hydrogenation, thanks to their rich hydrogen surface-redox chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Photochemical Aging Alters Secondary Organic Aerosol Partitioning Behavior

Organic aerosol is the largest fraction of the atmospheric non-refractory aerosol mass and has a significant impact on climate, visibility, and human health. A significant portion of organic aerosol is secondary organic aerosol (SOA), which forms when volatile organic compounds (VOCs) are oxidized and the reaction products partition to the particle phase. SOA formation and aging have been described using semi-volatile partitioning theory, and a typical assumption invoked is that gas-particle partitioning rapidly reaches equilibrium. However, several studies have called into question whether traditional equilibrium assumptions are valid, either due to particle-phase diffusion limitations, particle-phase reactions, or liquid/liquid phase separation and immiscibility of organic phases. Here, we investigate the ability of partitioning theory to describe laboratory SOA formation experiments using SOA mass and yield as the evaluation metric. We conduct two types of experiments; co-condensation experiments in which isoprene and a-pinene are simultaneously oxidized to form SOA, and sequential condensation experiments in which fresh isoprene SOA is exposed to aged, pre-existing isoprene- or a-pinene-derived SOA particles. In the co-condensation experiments, partitioning theory successfully predicted the time-dependent SOA concentrations without invoking diffusion limitations or organic phase separation. However, in the sequential condensation experiments, yield analysis showed that fresh isoprene SOA did not partition into either the aged a-pinene or aged isoprene SOA particles over the 4 hour experimental timescale, even at relative humidity as high as 85%. This study shows that common assumptions regarding SOA gas-particle partitioning are accurate for fresh SOA, but that these assumptions break down after SOA has been photochemically aged for modest amounts of time (~1 day). These results have important consequences for modeling SOA formation and may help to resolve some seemingly divergent conclusions regarding diffusion limitations that exist in the literature.

Secondary Organic Aerosol (SOA), gas/particle part↗
DOE OSTI2021

Minimizing Oxygen Permeability in Chitin/Cellulose Nanomaterial Coatings by Tuning Chitin Deacetylation

The demand for packaging materials with low gas permeabilities is increasing, but commonly used petroleum-derived single-use plastics are not renewable, biodegradable, or easy to recycle. Nanomaterials composed of chitin and cellulose, which are abundant in nature, have high crystallinities and low oxygen permeabilities (OP), providing a viable alternative. In this work, we explore how deacetylation conditions of crab shell chitin can be used to tune the charge and size of resulting chitin nanowhiskers (ChNWs) and the resulting OP of layered film structures. Three deacetylation factors, the concentration of sodium hydroxide (%NaOH), temperature (T), and reaction time, were explored using a three-factor three-level Taguchi design with an orthogonal array. Furthermore, the resulting ChNW suspensions were sequentially spray-coated with suspensions of cellulose nanocrystals (CNCs) onto cellulose acetate (CA) films to form a multilayer structure. We show that ChNWs prepared under more aggressive deacetylation conditions inside the original orthogonal array (higher %NaOH, T, and time) had shorter lengths but the surface charge was significantly influenced only by more aggressive deacetylation outside of the original design conditions. With only ~10% decrease in the ultimate tensile strength and no significant loss in failure strain, the ChNW-CNC coating resulted in ~20% decrease in WVTR in comparison to uncoated CA films. The optimization of process conditions resulted in CA-ChNW-CNC films with a 91-99% decrease in OP (132-16.7 cm 3 ∙μm/m 2 /day/kPa versus 1553 cm3∙μm/m2/day/kPa for uncoated CA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermal Hydroquinone Oxidation on Co/N-doped Carbon Proceeds by a Band-Mediated Electrochemical Mechanism

Molecules catalyze aerobic oxidation reactions via redox cycling at the metal center to effect sequential activation of O 2 and the substrate. Metal surfaces can catalyze the same transformations by coupling independent half-reactions for oxygen reduction and substrate oxidation mediated via the exchange of band-electrons. Metal/nitrogen-doped carbons (MNCs) are promising catalysts for aerobic oxidation that consist of molecule-like active sites embedded in a conductive carbon host. Owing to their combining molecular and metallic features, it remains unclear whether they proceed via the sequential redox cycling pathways of molecules or the band-mediated pathways of metals. Herein, we simultaneously track the potential of the catalyst and the rate of the turnover of aerobic hydroquinone oxidation on a cobalt-based MNC catalyst contacted to a catalytically inactive carbon electrode. By comparing operando measurements of rate and potential with the current-voltage behavior of each constituent half-reaction under identical conditions, we show that these molecular materials can display the band-mediated reaction mechanisms of extended metallic solids. Further, we show that the action of these band-mediated mechanisms explains fractional reaction orders in both oxygen and hydroquinone, the time evolution of catalyst potential and rate, and the dependence of rate on overall reaction free energy. Selective poisoning experiments suggest that oxygen reduction proceeds at cobalt sites, whereas quinone oxidation proceeds at native oxidic defects on the carbon. These findings highlight that molecule-like active sites can take advantage of band-mediated mechanisms when coupled to conductive hosts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Watching Excited State Dynamics with Optical and X-ray Probes: The Excited State Dynamics of Aquocobalamin and Hydroxocobalamin

Femtosecond time-resolved X-ray absorption (XANES) at the Co K-edge, X-ray emission (XES) in the Co Kβ and valence-to-core regions, and broadband UV–vis transient absorption are combined to probe the femtosecond to picosecond sequential atomic and electronic dynamics following photoexcitation of two vitamin B12 compounds, hydroxocobalamin and aquocobalamin. Polarized XANES difference spectra allow identification of sequential structural evolution involving first the equatorial and then the axial ligands, with the latter showing rapid coherent bond elongation to the outer turning point of the excited state potential followed by recoil to a relaxed excited state structure. Time-resolved XES, especially in the valence-to-core region, along with polarized optical transient absorption suggests that the recoil results in the formation of a metal-centered excited state with a lifetime of 2–5 ps. In conclusion, this combination of methods provides a uniquely powerful tool to probe the electronic and structural dynamics of photoactive transition-metal complexes and will be applicable to a wide variety of systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗