Density of matter assembled from randomly incident particles.
Lunar photometric properties reproducible from surfaces composed of dark randomly-fallen grains, noting density as function of grain geometry and incident angle
ASTRONOMICAL PHOTOMETRY↗
SEARCH · Engineering Papers
Results for “scattering geometry”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Energy transfer in volume-reflecting heat shields
An approximate analysis of radiative transfer in highly scattering materials was developed based on the Kubelka-Munk differential equations--a set of two differential equations representing the spatial rate of change of radiative half-fluxes within the scattering media. These approximate solutions of the Kubelka-Munk equations together with analytic solutions for the steady state temperature distribution for two types of boundary conditions are given. These solutions show the influence of back surface reflectance, scattering power, incident radiative flux parameter and boundary conductive flux parameter on overall reflectance and temperature distributions. This radiation field analysis, adapted to spherical geometry, was applied to the evaluation of the thermal performance of teflon and fritted quartz as heat protection materials for entry into the atmosphere of Jupiter.
Weston, K. C.↗
The S-193 radar altimeter experiment
The Skylab S-193 altimeter experiment utilizes a 10- and 100-ns pulse length, 13.9-GHz earth-pointed radar system to obtain earth-surface backscatter measurements from the Skylab spacecraft. Objectives of the experiment are to obtain precision measurements of surface profile for uses in geodesy, oceanography, and earth physics, and to measure radar-signal characteristics from an earth-orbit geometry to provide design information for future radar remote-sensors. The technical approach is that of measuring the power impulse response of the scattering surface. The hardware is designed to operate in five modes: waveform or impulse-response measurement and altitude determination; radar cross-section experiment; signal correlation experiment; 10-nsec pulse-compression evaluation; and nadir-seeker experiment.
Mcgoogan, J. T.↗
Soft X-rays from the sunlit earth's atmosphere
Observations of soft X-ray emission from the sunlit earth atmosphere are presented and compared with the predictions of an earth albedo X-ray theory. The exact theory accounts for the flux of Thomson scattered solar X rays and fluorescently excited K X rays that arise following the absorption of incident X rays as a function of observing geometry. Observations were made at widely separated geometries with the two low-energy detectors of the A-2 experiment on the HEAO-1 satellite. Fitting of the model to the observed spectra results in values for the solar coronal temperature and emission measure that are in good agreement with expected values for the nonflaring sun, indicating that X-ray observations of the sunlit atmosphere may be a useful monitor of solar activity for satellites unable to view the sun directly. The total measured fluorescent line flux is also in agreement with calculations, although the N/O line ratio is not. X-ray fluorescence measurements from the sunlit atmosphere will thus be useful in monitoring atmospheric composition only to the extent that the total line counting rates depend upon the composition.
Mckenzie, D. L.↗
Mechanical response of unidirectional boron/aluminum under combined loading
Three test methods were employed to characterize the response of unidirectional Boron/Aluminum metal matrix composite material under monotonic and cyclic loading conditions, namely, losipescu shear, off-axis tension and compression. The characterization of the elastic and plastic response includes the elastic material properties, yielding and subsequent hardening of the unidirectional composite under different stress ratios in the material principal coordinate system. Yield loci generated for different stress ratios are compared for the three different test methods, taking into account residual stresses and specimen geometry. Subsequently, the yield locus for in-plane shear is compared with the prediction of an analytical, micromechanical model. The influence of the scatter in the experimental data on the predicted yield surface is also analyzed. Lastly, the experimental material strengths in tension and compression are correlated with the maximum stress and the Tsai-Wu failure criterion.
Becker, Wolfgang↗
Temporal and spatial mapping of surface albedo and atmospheric dust opacity on Mars
The Mariner 9 and Viking provided abundant evidence that eolian processes are active over much of the surface of Mars. Past studies have demonstrated that variations in regional albedo and wind-streak patterns are indicative of sediment transport through a region, while thermal inertia data (derived from the Viking Infrared Thermal Mapper (IRTM) dataset) are indicative of the degree of surface mantling by dust deposits. The visual and thermal data are therefore diagnostic of whether net erosion or deposition of dust-storm fallout is taking place currently and whether such processes have been active in a region over the long term. These previous investigations, however, have not attempted to correct for the effects of atmospheric dust loading on observations of the martian surface, so quantitative studies of current sediment transport rates have included large errors due to uncertainty in the magnitude of this 'atmospheric component' of the observations. We have developed a radiative transfer model that allows the atmospheric dust opacity to be determined from IRTM thermal observations. Corrections for the effects of atmospheric dust loading on observations of surface albedo can also be modeled. This approach to determining 'dust-corrected surface albedo' incorporates the atmospheric dust opacity, the single-scattering albedo and particle phase function of atmospheric dust, and the bidirectional reflectance of the surface, and it accounts for variable lighting and viewing geometry.
Lee, S. W.↗
New techniques for diffusing-wave spectroscopy
We present two new types of measurements that can be made with diffusing-wave spectroscopy (DWS), a form of dynamic light scattering that applies in limit of strong multiple scattering. The first application is to measure the frequency-dependent linear viscoelastic moduli of complex fluids using light scattering. This is accomplished by measuring the mean square displacement of probe particles using DWS. Their response to thermal fluctuations is determined by the fluctuation-dissipation relation, and is controlled by the response of the surrounding complex fluid. This response can be described in terms of a memory function, which is directly related to the complex elastic modulus of the system. Thus by measuring the mean square displacement, we are able to determine the frequency dependent modulus. The second application is the measurement of shape fluctuations of scattering particles. This is achieved by generalizing the theory for DWS to incorporate the effects if amplitude fluctuations in the scattering intensity of the particles. We apply this new method to study the thermally induced fluctuations in the shape of spherical emulsion droplets whose geometry is controlled by surface tension.
Mason, T. G.↗
Small-scale cosmic microwave background anisotropies as probe of the geometry of the universe
We perform detailed calculations of cosmic microwave background (CMB) anisotropies in a cold dark matter (CDM)-dominated open universe with primordial adiabatic density perturbations for a variety of reionization histories. The CMB anisotropies depend primarily on the geometry of the universe, which in a matter-dominated universe is determined by Omega and the optical depth to the surface of last scattering. In particular, the location on the primary Doppler peak depends primarily on Omega and is fairly insensitive to the other unknown parameters, such as Omega(sub b), h, Lambda, and the shape of the power spectrum. Therefore, if the primordial density perturbations are adiabatic, measurements of CMB anisotropies on small scales may be used to determine Omega.
Kamionkowski, Marc↗
Wavelet analysis introduction and application to radar scattering from water waves
Double-parameter expansions, leading to an instantaneous multiscale analysis, are used to obtain time-frequency graphs from time-series data for interpretation of scatterometer response to sea surface geometry. This method is used to define, as well as possible, one-dimensional signal input (elevation and slope). However, some important fundamental parameters, such as the asymmetric development of short scales in crests and troughs, the long-wave amplitude modulation, the different zero-crossings, and so forth, are easily extracted from the wavelet images.
Chapron, B.↗
Atmospheric, Non-Combusting Droplet Sizing and Spray Imaging Results From a Non-Proprietary Aero Gas Turbine Engine Pressure Swirl Atomizer using Shadowgraphy and Planar Laser Scatter
Members from industry and federal agencies of the United States have developed a collaborating group focused on improving the understanding of the atomization processes common to gas turbine engines. The group is aimed on providing high quality data using x-ray diagnostics in the internal geometry and the near-field dense spray as well as optical diagnostics in the visible spectrum, downstream of the nozzle. This paper reports results from one of the two non-proprietary injectors designs from the group: the primary-secondary injector. In particular, we characterize the spray from only the primary, pressure-swirl atomizing circuit using water through the nozzle. We observed Sauter mean diameter decreased with increased water pressure drop across the nozzle. SMD was also collected at three axial distances and showed decreased size with distance from the nozzle. Planar laser sheet droplet scattering provided qualitative assessment of the spray. Higher water pressure drops provided better atomization than lower pressure drops. The addition of swirling air flow through the injector alleviates and improves the atomization quality, particularly at the lower water pressure drops.
optical diagnostics↗
Comparative study of Suits and SAIL canopy reflectance models
A detailed understanding of the relationships between the canopy reflectance and the characteristics of canopy elements is an important factor for the full exploitation of the potential of remote sensing from aircraft and spacecraft altitudes to map vegetation and estimate key agronomic parameters such as the leaf area index (LAI) and biomass (BM). Suits (1972) idealized the canopy geometry by replacing each plant component with three orthogonal projections of that component. Verhoeff and Bunnik (1981) extended the Suits model, henceforth called the SAIL (Scattering from Arbitrarily Inclined Leaves) model, by removing certain constraints. The present investigation is concerned with an evaluation of the performance of the Suits and SAIL models, taking into account two data sets on soybean and corn. It was found that the tested models have significant deficiencies. However, the performance of the SAIL model is better than that of the Suits model because it provides a more realistic description of the canopy architecture.
Badhwar, G. D.↗
An electrostatically and a magnetically confined electron gun lens system
Focal properties, electron trajectory calculations, and geometries are given for two electron 'gun' lens systems that have a variety of applications in, for example, electron-neutral and electron-ion scattering experiments. One nine-lens system utilizes only electrostatic confinement and is capable of focusing electrons onto a fixed target with extremely small divergence angles, over a range of final energies 1-790 eV. The second gun lens system is a simpler three-lens system suitable for use in a uniform, solenoidal magnetic field. While the focusing properties of such a magnetically confined lens systenm are simpler to deal with, the system does illustrate features of electron extraction and Brillouin flow that have not been suitably emphasized in the literature.
Bernius, Mark T.↗
Suzaku View of the Swift/BAT Active Galactic Nuclei (I): Spectral Analysis of Six AGNs and Evidence for Two Types of Obscured Population
We present a systematic spectral analysis with Suzaku of six AGNs detected in the Swift/BAT hard X-ray (15-200 keV) survey, Swift J0138.6-4001, J0255.2-0011, J0350.1-5019, J0505.7-2348, J0601.9-8636, and J1628.1-5145. This is considered to be a representative sample of new AGNs without X-ray spectral information before the BAT survey. We find that the 0.5-200 keV spectra of these sources can be uniformly fit with a base model consisting of heavily absorbed (log NH >23.5/sq cm) transmitted components, scattered lights, a reflection component, and an iron-K emission line. There are two distinct groups, three "new type" AGNs (including the two sources reported by Ueda et al. 2007) with an extremely small scattered fraction (f(sub scat) < 0:5%) and strong reflection component (R = omega/2pi > or equal to 0.8 where omega is the solid angle of the reflector), and three "classical type" ones with f(sub scat > 0.5% and R < or approx. 0.8. The spectral parameters suggest that the new type has an optically thick torus for Thomson scattering (N(sub H) approx. 10(exp 25)/sq cm) with a small opening angle theta approx. 20deg viewed in a rather face-on geometry, while the classical type has a thin torus (N(sub H) approx. 10(exp 23-24)/sq cm) with theta > or approx. 30deg. We infer that a significant number of new type AGNs with an edge-on view is missing in the current all-sky hard X-ray surveys. Subject headings: galaxies: active . gamma rays: observations . X-rays: galaxies . X-rays: general
Eguchi, Satoshi↗
Modal element method for scattering of sound by absorbing bodies
The modal element method for acoustic scattering from 2-D body is presented. The body may be acoustically soft (absorbing) or hard (reflecting). The infinite computational region is divided into two subdomains - the bounded finite element domain, which is characterized by complicated geometry and/or variable material properties, and the surrounding unbounded homogeneous domain. The acoustic pressure field is represented approximately in the finite element domain by a finite element solution, and is represented analytically by an eigenfunction expansion in the homogeneous domain. The two solutions are coupled by the continuity of pressure and velocity across the interface between the two subdomains. Also, for hard bodies, a compact modal ring grid system is introduced for which computing requirements are drastically reduced. Analysis for 2-D scattering from solid and coated (acoustically treated) bodies is presented, and several simple numerical examples are discussed. In addition, criteria are presented for determining the number of modes to accurately resolve the scattered pressure field from a solid cylinder as a function of the frequency of the incoming wave and the radius of the cylinder.
Baumeister, Kenneth J.↗
UV resonance line dayglow emissions on earth and Jupiter
The similarities and differnces between atomic resonance line emissions on earth and Jupiter are studied. For earth, the scattering of the conservative atomic oxygen triplet transition at 1304 A and the nonconservative atomic oxygen sextuplet at 989 A is considered. For Jupiter, the scattering of the conservative atomic hydrogen doublet at 1216 A and the nonconservative atomic hydrogen doublet at 1026 A are addressed. Models are presented for the intensities of the emission features as seen from a distance of several planetary radii, using the same observational geometry for both earth and Jupiter. Variations of the line-integrated emissions across the disk and near the limb of each planet are examined in detail. Line profiles for the emission near the limb and at disk-center are also studied. The models reveal the importance of including inhomogeneities and temperature variations of the atmosphere in scattering models, and indicate that outer planet emissions previously interpreted as 'electroglow' may be solely due to resonant scattering of solar emissions.
Gladstone, G. Randall↗
Electromagnetic scattering from two-dimensional thick material junctions
The problem of the plane wave diffraction is examined by an arbitrary symmetric two dimensional junction, where Generalized Impedance Boundary Conditions (GIBCs) and Generalized Sheet Transition Conditions (GSTCs) are employed to simulate the slabs. GIBCs and GSTCs are constructed for multilayer planar slabs of arbitrary thickness and the resulting GIBC/GSTC reflection coefficients are compared with exact counterparts to evaluate the GIBCs/GSTCs. The plane wave diffraction by a multilayer material slab recessed in a perfectly conducting ground plane is formulated and solved via the Generalized Scattering Matrix Formulation (GDMF) in conjunction with the dual integral equation approach. Various scattering patterns are computed and validated with exact results where possible. The diffraction by a material discontinuity in a thick dielectric/ferrite slab is considered by modelling the constituent slabs with GSTCs. A non-unique solution in terms of unknown constants is obtained, and these constants are evaluated for the recessed slab geometry by comparison with the solution obtained therein. Several other simplified cases are also presented and discussed. An eigenfunction expansion method is introduced to determine the unknown solution constants in the general case. This procedure is applied to the non-unique solution in terms of unknown constants; and scattering patterns are presented for various slab junctions and compared with alternative results where possible.
Ricoy, M. A.↗
Modal element method for scattering and absorbing of sound by two-dimensional bodies
The modal element method for acoustic scattering from a 2-D body is presented. The body may be acoustically soft (absorbing) or hard (reflecting). The infinite computational region is divided into two subdomains - the bounded finite element domain, which is characterized by complicated geometry and/or variable material properties, and the surrounding unbounded homogeneous domain. The acoustic pressure field is represented approximately in the finite element domain by a finite element solution, and is represented analytically by an eigenfunction expansion in the homogeneous domain. The two solutions are coupled by the continuity of pressure and velocity across the interface between the two subdomains. Also, for hard bodies, a compact modal ring grid system is introduced for which computing requirements are drastically reduced. Analysis for 2-D scattering from solid and coated (acoustically treated) bodies is presented, and several simple numerical examples are discussed. In addition, criteria are presented for determining the number of modes to accurately resolve the scattered pressure field from a solid cylinder as a function of the frequency of the incoming wave and the radius of the cylinder.
Baumeister, K. J.↗
HST/ACS Coronagraphic Observations of the HD 163296 Circumstellar Disk: Evidence of Time-Variable Self-Shadowing?
We present Hubble Space Telescope Advanced Camera for Surveys (HST/ACS) coronagraphic observations of the Herbig Ae star HD 163296. HD 163296's scattered light disk was resolved in the F606W and F814W filters in observations obtained In 2003 and in the F435W filter in observations obtained in 2004. Analysis of single-epoch data indicates that the disk (V-I) color is redder than the observed stellar (V-I) color. This spatially uniform red disk color might be indicative of either an evolution in the grain size distribution (i.e. grain growth) and/or composition. Both of these processes would be consistent with the observed flat geometry of the outer disk, as diagnosed by the observed r$(exp -3)$ power law behavior of its median azimuthally averaged disk surface brightness, which suggest that grain evolution is occurring. Comparison of ACS and STIS epoch scattered light data reveals differences in the observed disk surface brightnesses, of order 1 mag arcsec$(exp -2)$, in both V and white-light filter bandpasses. Along with the observed variability in the visibility and surface brightness of the ansa(e) in the disk, and spectropolarimetric variability of the system, these results suggest that the resolved scattered light disk is variable, a phenomenon not previously observed in any other Herbig protoplanetary system We speculate that the observed behavior might be attributable to the variable inflation of the scale height of the inner disk wall, which results in variable self-shadowing of the outer disk.
Wisniewski, J.↗