Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scaffold”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Methods of fabricating porous ceramic electrodes for solid state battery applications

Compositions and methods for the fabrication of electrode and porous lithium-garnet electrolyte scaffolds for use in solid state batteries and other devices are provided. The methods produce porous structures using phase inversion or high shear compaction processes to fabricate a solid-state battery electrode material from LLZO electrolytes. Engineered electrode structures with a porous scaffold of solid electrolyte material provide lower interfacial resistances and a mechanical support for a thin solid electrode layer improving performance.

Tucker, Michael↗
DOE OSTI2023

Rheology guiding the design and printability of aqueous colloidal composites for additive manufacturing

Vat photopolymerization (VP) and direct ink write (DIW) additive manufacturing (AM) provide complex geometries with precise spatial control employing a vast array of photo-reactive polymeric systems. Although VP is recognized for superior resolution and surface finish, DIW provides versatility for higher viscosity systems. However, each AM platform presents specific rheological requirements that are essential for successful 3D printing. First, viscosity requirements constrain VP polymeric materials to viscosities below 10 Pa s. Thus, this requirement presents a challenging paradox that must be overcome to attain the physical performance of high molecular weight polymers while maintaining suitable viscosities for VP polymeric materials. Second, the necessary rheological complexity that is required for DIW pastes requires additional rheological measurements to ensure desirable thixotropic behavior. Further, this manuscript describes the importance of rheological measurements when designing polymeric latexes for AM. Latexes effectively decouple the dependency of viscosity on molecular weight, thus enabling high molecular weight polymers with low viscosities. Photo-crosslinking of water-soluble monomers and telechelic oligomeric diacrylates in the presence of the latex enables the fabrication of a scaffold, which is restricted to the continuous aqueous phase and effectively surrounds the latex nanoparticles enabling the printing of otherwise inaccessible high molecular weight polymers. Rheological testing, including both steady and oscillatory shear experiments, provides insights into system properties and provides predictability for successful printing. This perspective article aims to provide an understanding of both chemical functionality (photo- and thermal-reactivity) and rheological response and their importance for the successful design and evaluation of VP and DIW processable latex formulations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and characterization of photo-cross-linkable quince seed-based hydrogels for soft tissue engineering applications

The convenience, versatility, and biocompatibility of photocrosslinkable hydrogel precursors make them promising candidates for developing tissue engineering scaffolds. However, the current library of photosensitive materials is limited. This study reports, for the first time, the modification of quince seed mucilage (QS) with glycidyl methacrylate (GM), resulting in the synthesis of methacrylated QS (QSGM). The chemical composition and structure of QS were analyzed. The effects of reaction time, temperature, QS concentration, and GM/QS ratio on the degree of methacrylation, as well as the physicochemical, rheological, mechanical, and biological properties of the synthesized materials were explored. Chemical characterization using 1H NMR and FTIR confirmed the successful methacrylation of QS. Hydrogels fabricated from QSGMs at a 0.5 wt% concentration exhibited high swelling ratios of 320 to 580 g/g, and compressive strengths between 0.6 ± 0.1 and 1.2 ± 0.3 kPa. No significant changes in the rheological properties of hydrogel precursors were observed. Moreover, QSGM-based hydrogels supported cell encapsulation for 14 days with minimal cytotoxicity and immune cell activation. Finally, as a proof of concept, the potential use of QSGM for 3D printing was demonstrated. Overall, the results highlight the significant potential of QSGMs as a biomaterial of choice for soft tissue engineering applications.

3D printing↗
DOE OSTI2023

Active Learning Guided Computational Discovery of Plant-Based Redoxmers for Organic Nonaqueous Redox Flow Batteries

Organic nonaqueous redox flow batteries (ONRFBs) are promising energy storage devices due to their scalability and reliance on sourceable materials. However, finding suitable redox-active organic molecules (redoxmers) for these batteries remains a challenge. Using plant-based compounds as precursors for these redoxmers can decrease their costs and environmental toxicity. In this computational study, flavonoid molecules have been examined as potential redoxmers for ONRFBs. Flavone and isoflavone derivatives were selected as catholyte (positive charge carrier) and anolyte (negative charge carrier) molecules, respectively. To drive their redox potentials to the opposite extremes, in silico derivatization was performed using a novel algorithm to generate a library of > 40000 candidate molecules that penalizes overly complex structures. A multiobjective Bayesian optimization based active learning algorithm was then used to identify best redoxmer candidates in these search spaces. Furthermore, our study provides methodologies for molecular design and optimization of natural scaffolds and highlights the need of incorporating expert chemistry awareness of the natural products and the basic rules of synthetic chemistry in machine learning.

25 ENERGY STORAGE↗
DOE OSTI2021

In Vitro and in Vivo Analyses of the Effects of Source, Length, and Charge on the Cytotoxicity and Immunocompatibility of Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) are an emergent, sustainable nanomaterial which are bio-sourced, abundant, and biodegradable. On account of their high aspect ratio, low density, and mechanical rigidity, they have been employed in numerous areas of biomedical research including as reinforcing materials for bone or tissue scaffolds or as carriers in drug delivery systems. Given the promise of these materials for such use, characterizing and understanding their interactions with biological systems is an important step to prevent toxicity or inflammation. Reported herein are studies aimed at exploring the in-vitro and in-vivo effects that source, length, and charge of the CNCs have on cytotoxicity and immune response. In this study, CNCs from four different biosources (cotton, wood, Miscanthus x. Giganteus, and sea tunicate) were prepared and functionalized with positive or negative charges to obtain a small library of CNCs with a range of dimensions and surface charge. A method to remove endotoxic or other impurities on the CNC surface leftover from the isolation process was developed, and the biocompatibility of the CNCs was subsequently assayed in-vitro and in-vivo. After subcutaneous injection, it was found that unfunctionalized (uncharged) CNCs form aggregates at the site of injection, inducing splenomegaly and neutrophil infiltration, while charged CNCs having surface carboxylates, sulfate half-esters, or primary amines were biologically inert. No effect of particle source or length was observed in the in-vitro and in-vivo studies conducted. The lack of in-vitro or in-vivo immune response toward charged CNCs in these experiments supports their use in future biological studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bioinspired Catalyst Design Principles: Progress in Emulating Properties of Enzymes in Synthetic Catalysts

Catalysis enables many aspects of modern life, including fuels, products, plastics, and medicines. Recent advances in catalysis have enabled us to realize higher efficiencies and new processes. Ideally, we seek to achieve high rates of selective conversions using catalysts derived from abundantly available elements and operating under mild conditions, specifically lower reaction temperatures and pressures. Such catalysts could enable decentralized, on-demand synthesis of chemicals and energy carriers. Nature has demonstrated the feasibility of this approach with enzymes, which showcase catalytic processes at low temperatures and pressures with nonprecious metals. Current thinking holds that in addition to the active site, the complexity of the enzyme structure, specifically the protein scaffold, is also critical to achieving this performance. Recreating this environment has been a long-standing scientific goal. However, we still understand the functions of enzymes better than we understand the de novo design of catalysts that mimic enzymes features, while also retaining their activity and selectivity under more demanding conditions. Here, in this Perspective, we will critically examine four key areas of catalyst design that incorporate the chemical and structural properties of enzymes into synthetic catalysts: (i) the use of confinement to enhance catalytic activity, (ii) tailoring the environment around the active site, (iii) proton transport, and (iv) bifunctionality and cooperativity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

De novo design of protein homodimers containing tunable symmetric protein pockets

Function follows form in biology, and the binding of small molecules requires proteins with pockets that match the shape of the ligand. For design of binding to symmetric ligands, protein homo-oligomers with matching symmetry are advantageous as each protein subunit can make identical interactions with the ligand. Here, we describe a general approach to designing hyperstable C2 symmetric proteins with pockets of diverse size and shape. We first designed repeat proteins that sample a continuum of curvatures but have low helical rise, then docked these into C2 symmetric homodimers to generate an extensive range of C2 symmetric cavities. We used this approach to design thousands of C2 symmetric homodimers, and characterized 101 of them experimentally. Of these, the geometry of 31 were confirmed by small angle X-ray scattering and 2 were shown by crystallographic analyses to be in close agreement with the computational design models. These scaffolds provide a rich set of starting points for binding a wide range of C2 symmetric compounds.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

On the progress of 3D-printed hydrogels for tissue engineering

Additive manufacturing or more commonly known as 3D printing, is currently driving innovations and applications in diverse fields such as prototyping, manufacturing, aerospace, education, and medicine. Recent technological and materials research breakthroughs have enabled 3D bioprinting, where biomaterials and cells are used to create scaffolds and functional living tissues (e.g. skin, cartilage, etc.). This prospective focuses on the classification and applications of hydrogels, and design considerations in their production (i.e. physical and biological parameters). Herein, the materials for 3D printing of hydrogels, such as biopolymers, synthetic polymers, and nanocomposites, are mainly discussed. More importantly, future perspectives on 3D printing hydrogels including new materials, 4D printing, emerging printing technologies, etc. and their importance in biomedical and bioengineering applications are discussed.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Ultrahigh Mass Loading Batteries with Holey Graphene-Enabled Dry-Pressed Cathode Architectures

Holey graphene is a structural derivative of graphene with arrays of nanometer-sized, through-thickness holes across the lateral surface of the atomically thin nanosheet. It has been widely acknowledged that the presence of holes improves ion transport through the graphene planes, making holey graphene an ideal electrode material for electrochemical energy storage. We recently discovered another unique attribute of holey graphene in that it can be directly compressed from powder into electrode in a single step without the use of solvent or binder. In addition to neat holey graphene electrodes, composite electrodes with holey graphene as an ultralightweight scaffold host filled with various active materials can also be readily prepared in a similar solvent-free and binder-free fashion. The active materials can be metal-containing catalysts for lithium-oxygen batteries, lithium-ion battery electrode materials, or high energy density components such as sulfur. Compared to the conventional slurry-based process, the dry-press method is comparably much more suitable toward the facile and scalable preparation of ultrahigh mass loading electrodes with ultrahigh areal capacities.

holey graphene, cathode scaffold, lithium metal, h↗
DOE OSTI2023

Candidatus Nanopusillus

The genus Candidatus Nanopusillus is comprised of small coccoid cells (~100–400 nm) that live epibiotically on the surface of archaeal hosts. The first described species, Candidatus Nanopusillus acidilobi, is an anaerobic, hyperthermophilic acidophile whose best growth is observed at 82°C, pH 3.6, cultivated from a hot spring in Yellowstone National Park. Ca. Nanopusillus acidilobi cells associate with the Crenarchaeota host organism Acidilobus sp. 7A. Archaeal flagella (archaella) have been predicted from the genome sequence and shown to be expressed in the proteome. Additionally, a second putative species, Candidatus Nanopusillus massiliensis, was recently reported from human dental plaque and associates with the methanogen Methanobrevibacter oralis. The genome consists of a single scaffold which is highly fragmented by spans of ambiguous nucleotides, with 16S rRNA gene fragments from Bacteria. Both species have small genomes (~0.6 Mb) encoding few biosynthetic genes and no apparent ATP synthase complex genes, suggesting that the nanoarchaeotes rely on their host for the production of major cellular precursors.

acidophile↗
DOE OSTI2021

Catalytic Bias in Enzymatic Metal Cofactor-Based Oxidation-Reduction Catalysis

Catalytic bias refers to the relative rate preference of a catalyst for either the forward or reverse direction. In enzymatic metal cofactor-based oxidation-reduction catalysis, the tuning of catalytic bias plays an underlying role in controlling rates of reactivity. For this, enzymes have evolved complex active sites that can exist in multiple oxidation states with differing reduction potentials in order to achieve challenging multi-step, oxidation-reduction reactions. Conceivably, the relative stability of the intermediates that contribute to determining the rate-limiting step of the catalytic cycle could impose catalytic bias, although mechanisms for this concept are just beginning to be realized. As one example, recent work on Clostridium pasteurianum [FeFe]-hydrogenases which catalyze reversible hydrogen oxidation have shown that the differential stabilization/destabilization of active site oxidation states through either static or dynamic protein interactions can preferentially promote either the hydrogen oxidation or proton reduction direction of the reaction. This revealed how an enzymatic cofactor can impose bias in oxidation-reduction catalysis through various tuning mechanisms by protein scaffold interactions. The hypothesis based on achieving catalytic bias through the modulation of cofactor oxidation states critical for the reaction cycle can be extended more generally to other cofactor-based oxidation-reductions catalysts. The current understanding of catalytic bias has significant implications for the design of synthetic catalysts used in industrial settings, as well as providing a greater fundamental understanding of the factors that control metabolic processes in all life.

catalysis↗
DOE OSTI2021

A Self-Healable Sulfide/Polymer Composite Electrolyte for Long-Life, Low-Lithium-Excess Lithium-Metal Batteries

Solid electrolyte-protected lithium-metal anodes promise energy-dense, safe cells. While sulfide solid electrolytes enable facile processability and fast ion transport, they suffer from complex chemo-mechanical issues, including Li plating-induced fracture and Li stripping-induced contact loss. To address these issues, a grafting approach is implemented to functionalize the sulfide solid electrolyte (Li 3,85 Sn 0.85 Sb 0.15 S 4 ) with a self-healing unit. This leads to a dynamic bonding between the solid electrolyte network and a mechanically robust polymer scaffold, which reversibly accommodates the volume changes of the lithium-metal anode. Thus, the approach improves the interfacial contact between the lithium-metal anode and the composite electrolyte, enabling stable cycling at a mild stack pressure (160 kPa). With a negative to positive capacity ratio equals to 1, pouch full cells with a high-nickel cathode (nickel content > 90%) and lithium-metal anode display 92% capacity retention for 140 cycles. Engineering the interface between solid electrolyte and the polymeric binder offers a promising pathway to address the chemo-mechanical issues.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tailoring the Gating Effect of Organic Cage via a Porous Liquid Approach

Porous liquids (PLs) represent a new frontier in material design combining the merits of solid porous host and liquid phase in gas separation and catalysis. Herein, the PL construction approach is harnessed to tailor the gating effect of organic cages toward enhanced gas separation. A type-II fluorinated PL (F-PL) is developed via liquifying a fluorinated organic cage (F-cage) by a fluorinated ionic liquid (F-IL). The F-cage is featured by a small window size (≈5.1 Å), high surface area, good stability under highly ionic conditions, and abundant fluorine moieties. The F-IL possesses high steric hindrance (bulky cation) and structure similarity with the F-cage (fluorinated alkyl chain in the anion). The existing status structure integrity of F-cage in F-IL upon F-PL formation is illustrated via spectroscopy and X-ray-based techniques. The existence of rigid voids in F-PL is illustrated by positron annihilation lifetime spectroscopy (PALS) and the improved gas uptake capacity than F-IL via pressure-swing CO 2 uptake isotherms (0–40) bar. Further, the comparison of the gas uptake behavior (CO 2 , N 2 , CH 4 , and Xe) of F-PL and F-cage, combining the computational simulation, highlights that the PL construction can be leveraged to tune the window size of porous scaffolds, leading to enhanced gas selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Additive Manufacturing with Cellulose-Based Composites: Materials, Modeling, and Applications

Recent advances in large-scale additive manufacturing (AM) with polymer-based composites have enabled efficient production of high-performance materials. Cellulose nanomaterials (CNMs) have emerged as bio-based feedstocks due to their exceptional strength and sustainability. However, challenges such as hornification and poor dispersion in polymer matrices still limit large-scale CNM–polymer composite manufacturing, requiring novel strategies. Here, this review outlines an approach starting with atomic-level simulations to link molecular composition to key parameters like bulk density, viscosity, and modulus. These simulations provide data for finite element analysis (FEA), which informs large-scale experiments and reduces the need for extensive trials. The strategy explores how atomic interactions impact the morphology, adhesion, and mechanical properties of CNM-based composites in AM processes. The review also discusses current developments in AM, along with predictions of mechanical and thermal properties for structural applications, packaging, flexible electronics, and hydrogel scaffolds. By integrating experimental findings with molecular dynamics (MD) simulations and finite element modeling (FEM), valuable insights for material design, process optimization, and performance enhancement in CNM-based AM are provided to address ongoing challenges.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Designing Physicochemically‐Ordered Interphases for High‐Performance Composites

To enhance the mechanical properties of carbon fiber‐reinforced polymer composites, a physicochemical scaffold is designed incorporating microscopically architected chemically reactive nanofibers that act as a multiscale bridge between the carbon fibers and the matrix. Thermally activated nanofibers leverage their morphologically driven mechanochemical properties to form covalent bonds with adjacent polymer molecules, creating a co‐continuous network that dramatically enhances fiber‐matrix load transfer. By meticulously controlling the nanofiber architecture through variable surface area, functional group availability, and polymer chain alignment effects, the extent of covalent bonding between nanofibers and the matrix is manipulated ultimately resulting in improved carbon fiber‐matrix adhesion. Further, the concept was validated using polyacrylonitrile nanofibers within an acrylonitrile butadiene styrene matrix in a discontinuous carbon fiber‐reinforced composite system. Nanomechanical studies using atomic force microscopy and low‐field nuclear magnetic resonance spectroscopy confirmed immobilized, chemically transferred, and ordered nanostructures at the interphase. The resulting composites demonstrated ≈56% and ≈175% improvements in tensile strength and toughness, respectively, compared to composites without nanofiber. Comprehensive thermal, rheological, and X‐ray scattering analyses, along side all‐atomic molecular dynamics simulations, revealed the fundamental mechanisms behind these improvements in mechanical behavior. The versatility and efficacy of the approach have the potential to address longstanding interphase challenges in the composite industry.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Engineering Permanent Porosity into Liquids

The possibility of engineering well-defined pores into liquid materials is fascinating from both a conceptual and an applications point of view. Although the concept of porous liquids was proposed in 2007, these materials had remained hypothetical due to the technical challenges associated with their synthesis. Over the past five years, however, reports of the successful construction of porous liquids based on existing porous scaffolds, such as coordination cages, organic cages, metal–organic frameworks, porous carbons, zeolites, and porous polymers, have started to emerge. Here, the focus is on these early reports of porous liquids as prototypes in the field, classified according to the previously defined types of porous liquids. Particular attention will be paid to design strategies and structure–property relationships. Porous liquids have already exhibited promising applications in gas storage, transportation, and chemical separations. Furthermore, they show great potential for use in the chemical industry. The challenges of preparation, scale-up, volatility, thermal and chemical stability, and competition with porous solids will also be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Non-Solvent Induced Phase Separation Enables Designer Redox Flow Battery Electrodes

Porous carbonaceous electrodes are performance-defining components in redox flow batteries (RFBs), where their properties impact the efficiency, cost, and durability of the system. The overarching challenge is to simultaneously fulfill multiple seemingly contradictory requirements—i.e., high surface area, low pressure drop, and facile mass transport—without sacrificing scalability or manufacturability. Here, non-solvent induced phase separation (NIPS) is proposed as a versatile method to synthesize tunable porous structures suitable for use as RFB electrodes. The variation of the relative concentration of scaffold-forming polyacrylonitrile to pore-forming poly(vinylpyrrolidone) is demonstrated to result in electrodes with distinct microstructure and porosity. Tomographic microscopy, porosimetry, and spectroscopy are used to characterize the 3D structure and surface chemistry. Flow cell studies with two common redox species (i.e., all-vanadium and Fe2+/3+) reveal that the novel electrodes can outperform traditional carbon fiber electrodes. It is posited that the bimodal porous structure, with interconnected large (>50 µm) macrovoids in the through-plane direction and smaller (<5 µm) pores throughout, provides a favorable balance between offsetting traits. Although nascent, the NIPS synthesis approach has the potential to serve as a technology platform for the development of porous electrodes specifically designed to enable electrochemical flow technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fast X-ray Nanotomography with Sub-10 nm Resolution as a Powerful Imaging Tool for Nanotechnology and Energy Storage Applications

In the last decade, transmission X-ray microscopes (TXMs) have come into operation in most of the synchrotrons worldwide. They have proven to be outstanding tools for non-invasive ex and in situ 3D characterization of materials at the nanoscale across varying range of scientific applications. However, their spatial resolution has not improved in many years, while newly developed functional materials and microdevices with enhanced performances exhibit nanostructures always finer. Here, optomechanical breakthroughs leading to fast 3D tomographic acquisitions (85 min) with sub-10 nm spatial resolution, narrowing the gap between X-ray and electron microscopy, are reported. These new achievements are first validated with 3D characterizations of nanolithography objects corresponding to ultrahigh-aspect-ratio hard X-ray zone plates. Then, this powerful technique is used to investigate the morphology and conformality of nanometer-thick film electrodes synthesized by atomic layer deposition and magnetron sputtering deposition methods on 3D silicon scaffolds for electrochemical energy storage applications.

36 MATERIALS SCIENCE↗