Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raw materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

A sorghum pangenome reference improves global crop trait discovery

Although the green revolution adapted a handful of crops to homogeneous and high-input industrialized agriculture, much of the global population still relies on the local production of variable crop cultivars by low-input smallholder farms. This diversity of unhomogenized crops, like that of the grain and bioenergy crop sorghum, offers raw materials for genetic gain and cultivar improvement. However, breeding efforts can be constrained by highly specialized traits and breeding targets Here, to bridge this diversity, we constructed a 33-member pangenome reference and a diversity panel across 1,984 cultivars and landraces. We leveraged these resources to explore the complex interplay among historical contingency, ongoing adaptation and previously uncharacterized structural diversity. Specifically, our analyses conclusively demonstrated multiple nested and deeply diverged structural variants in the domestication gene SHATTERING1, which distinguish the previously established multicentric origin of sorghum. We then applied landscape genomics to reveal how gene flow and secondary contact created the complex genetic mosaic in contemporary breeding networks. As proof of concept for pangenome-accelerated trait discovery, we connected biosynthetic gene cluster structural variation to phenotypic leaf concentration of the cyanogenic glucoside dhurrin. Combined, these approaches will accelerate breeding and trait discovery and provide a framework for similar applications in other crops.

agricultural genetics↗

Early-Stage Evaluation of Catalyst Manufacturing Cost and Environmental Impact Using CatCost

The costs and environmental impacts of catalyst manufacture are often neglected during early-stage research because of a lack of accessible, standardized tools to assess them. Here we report the key features of CatCost, a free and public estimation tool for the evaluation of catalyst cost. We demonstrate its functionality with a case study of diverse catalysts (ZSM-5, Pt/TiO2 and Mo2C) for the catalytic fast pyrolysis of biomass. We quantified the economic and environmental improvements made by replacing circulating-bed ZSM-5 with more stable, fixed-bed Pt/TiO2 and Mo2C catalysts, while revealing the effects of synthesis methods and production scale on catalyst costs. The manufacture of ZSM-5 had a large processing cost contribution that was strongly scale dependent, whereas the costs of the other catalysts were dominated by raw materials at all scales. Furthermore, while ZSM-5 costs the least per kilogram, the more stable catalysts cost half as much per gallon of fuel.

BIOMASS FUELS,ENERGY PLANNING, POLICY, AND ECONOMY↗

Hydrogen-based ore-to-part manufacturing of near-net-shape stainless steel

Decarbonizing iron and steelmaking, combined with global disruptions to raw material supply chains, necessitates novel approaches to iron and steel production. In this work, we demonstrate a direct ore-to-part manufacturing route using a mixture of ore-derived oxide powders of Fe 2 O 3 , Cr 2 O 3 , NiO, and MoO 3 as feedstock for additive manufacturing, combined with sintering under H 2 to produce a near-net-shape austenitic stainless-steel. Complete reduction of all constituent oxides, including MoO 3 and Cr 2 O 3 , is achieved in-situ at 1300 °C, resulting in dense, crack-free bulk alloy. The fabricated part retains geometric fidelity while undergoing substantial volumetric shrinkage inherent to redox and sintering. Thermodynamic calculations elucidate the co-reduction mechanisms and alloying pathways that enable complete metallization. This work is the first demonstration of net-shaping metal parts directly from ore derived oxides, and this ore-to-part approach can minimize the emissions and lead time for manufacturing associated with downstream processing such as rolling, forging, and machining.

Yang, Mingzhang [Univ. of Waterloo, ON (Canada); F↗

From cellulose to 1,2,4-benzenetriol via catalytic degradation over a wood-based activated carbon catalyst

In this study, spherical P-doped activated carbon (CSP) was obtained from poplar bark by microwave carbonization with phosphoric acid as the dopant and activating agent. Phosphorus bonded with four oxygen atoms to form a phosphate-like structure rather than directly bonding with C atoms in CSP; such groups can provide Lewis acid active sites with moderately strong acidity. The Lewis acid and total acid content increased with increasing phosphoric acid doping ratio. The use of phosphoric acid as an activating agent promotes the formation of a developed porous structure. CSP 1 (mass ratio of raw material to acid = 1 : 1) had a specific surface area of 1115 m 2 g –1 with developed micro–mesoporous structures, mainly micropores. Investigation of the activity of CSP in catalytic cellulose hydrolysis during hydrothermal degradation showed that Brønsted acid sites promote hydrolysis and dehydration of cellulose, Lewis acid sites promote subsequent reactions such as isomerization, rearrangement, and oligomerization, and the developed pores can provide reaction sites and facilitate reactant transportation. The optimal reaction conditions, i.e. , 1 h at 230 °C and 1 MPa with CSP 1 (0.4 g) as the catalyst, gave a cellulose conversion of >99.9%, with 42.30% selectivity for 1,2,4-benzenetriol. This study provides an effective method for preparing 1,2,4-benzenetriol from cellulose with biomass-based activated carbon as the catalyst, which enables green synthesis of 1,2,4-benzenetriol and promotes the use of biomass waste resources.

1,2,4-benzenetriol↗

Sustainable energy and fuels from biomass: a review focusing on hydrothermal biomass processing

Fossil fuels are being replaced with renewable energy resources (biomass and biomass waste, solar, geothermal, wind, etc.) to ensure sustainable development, reduce the dependence on fossil fuels, address environmental challenges including climate change. Today, biomass produces 5 × 10 19 kJ of energy/year, which corresponds to 10% of the annual global energy consumption. Considering the variety of biomass resources, this value is predicted to reach 150 × 10 19 kJ by 2050. Biomass may become even more important for use as an energy resource and chemical raw material in the 21st century. Hydrothermal biomass conversion stands out as a promising and alternative technology. Methods such as traditional gasification and pyrolysis require dry biomass. Hydrothermal techniques have been developed to eliminate the cost and time required for drying biomass. The purpose of this process is to decompose biomass with a high moisture content into small molecules and reduce its oxygen content to obtain liquid fuels or valuable chemicals. Finally, this review presents the current and future state of energy, energy sources, biomass properties and biomass conversion technologies with a focus on hydrothermal technologies.

09 BIOMASS FUELS↗

Valorisation of technical lignin in rigid polyurethane foam: A critical evaluation on trends, guidelines and future perspectives

Lignin is one of the most abundant aromatic natural polymers. Produced as a by-product from the biomass refinery industries, lignin remains largely underutilised in high-value industrial applications. The incorporation of lignin in rigid polyurethane foam (RPUF) has been the focus of much research, due to its potential to replace fossil fuel-based components of RPUF. However, the overall sustainability of RPUF depends on numerous factors including processability, cost-effectiveness, and retention of performance throughout the service life. To date, the incorporation of lignin has been explored either as filler particles (through direct incorporation) or as a blendable liquid polyol introduced after chemical modifications (such as oxyalkylation, functionalisation, or depolymerisation). However, the production of lignin incorporated foam with high performance through cost-effective processing is still an ongoing challenge. Herein, this review critically appraises the progress on the effective incorporation of lignin in RPUF. Firstly, this review briefly covers the essential raw materials, formulation, important properties, and sustainability aspects of RPUF for industrial applications. Secondly, it provides insights on the key parameters of lignin of relevance to incorporation into RPUF. Thirdly, it benchmarks the reported studies on incorporation of lignin in RPUF systems by evaluating their important properties and proposes potential strategies for addressing the key challenges in the incorporation of lignin in RPUF. By bridging the gaps that exist in the literature on the utilisation of lignin in RPUF this account will serve as a resource for both beginners and professionals in the polyurethane and biorefinery industries towards the successful development of lignin incorporated RPUF for industrial applications

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen redox chemistry in P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 cathode for high-energy Na-ion batteries

Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.

25 ENERGY STORAGE↗

A Sobering Examination of the Feasibility of Aqueous Aluminum Batteries

Recent reports on aqueous aluminum (Al) batteries boast encouraging metrics including high energy density, nonflammability, and low raw material cost. However, the poorly understood solvation environment around the trivalent aluminum ions (Al3+) raises uncertainty regarding their feasibility. Furthermore, the corrosiveness of the acidic solutions and degree of hydration of aluminum trifluoromethanesulfonate (Al(OTf)3) salt is routinely mischaracterized. This study provides a rigorous examination of aqueous Al electrolytes, with the first compelling evidence for a dynamic octahedral solvation structure around Al3+ dominated by labile water and OH-, without Al-OTf contact ion pairs, at high concentrations. This solvation behavior and the concomitant electrostatic hydrolysis differs greatly from previously reported water-in-salt electrolytes, and occurs due to the high charge density of the Lewis acidic Al3+. Nuclear magnetic resonance spectroscopy and other physicochemical measurements quantitatively reveal how species activity evolves with concentration. The high proton activity observed in transport and electrochemical measurements constitutes a prohibitive barrier to the feasibility of rechargeable aluminum batteries with aqueous electrolyte.

Pastel, Glenn R.↗

Selective bacterial separation of critical metals: towards a sustainable method for recycling lithium ion batteries

The large scale recycling of lithium ion batteries (LIBs) is essential to satisfy global demands for the raw materials required to implement this technology as part of a clean energy strategy. However, despite what is rapidly becoming a critical need, an efficient and sustainable recycling process for LIBs has yet to be developed. Biological reactions occur with great selectivity under mild conditions, offering new avenues for the implementation of more environmentally sustainable processes. Here, we demonstrate a sequential process employing two bacterial species to recover Mn, Co and Ni, from vehicular LIBs through the biosynthesis of metallic nanoparticles, whilst Li remains within the leachate. Moreover the feasibility of Mn recovery from polymetallic solutions was demonstrated at semi-pilot scale in a 30 L bioreactor. Additionally, to provide insight into the biological process occurring, we investigated selectivity between Co and Ni using proteomics to identify the biological response and confirm the potential of a bio-based method to separate these two essential metals. Our approach determines the principles and first steps of a practical bio-separation and recovery system, underlining the relevance of harnessing biological specificity for recycling and up-cycling critical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Techno-economic and life cycle analyses of the synthesis of a platinum–strontium titanate catalyst

The heterogeneous platinum/strontium titanate (Pt/SrTiO 3 or Pt/STO) catalyst has garnered significant attention as a promising candidate for the hydrogenolysis of polyolefins to hydrocarbon oils. This study evaluates the cost and environmental impacts of a newly developed scalable Pt/STO catalyst production, which includes the synthesis of the STO support and the deposition of Pt onto the support. This two-step synthesis plays a significant role in assessing the commercial feasibility of the catalyst, while energy consumption during the process plays an important role in its environmental impacts. The CatCost and the Research and Development Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) models were used, respectively, to perform techno-economic analysis (TEA) and life cycle analysis (LCA) of the newly developed catalyst. The TEA showed that the raw materials, accounting for approximately 76% of the total operation cost, has a profound effect on the estimated catalyst cost, mainly due to the platinum precursor. The LCA findings indicated that the catalyst production generates greenhouse gas (GHG) emissions of 66 kg CO 2 e per kg, primarily due to the use of solvents and electricity in the process. The sensitivity analysis indicated that the total operating costs (OpEX), platinum precursor cost, and spent catalyst value (SCV) significantly impact the cost of the synthesized catalyst. Additionally, adopting solvent recovery strategies and using renewable electricity can reduce the GHG emissions of catalyst production to 29 kg CO 2 e per kg.

Heterogeneous Platinum/strontium titanate Catalyst↗

A polysulfide/ferricyanide redox flow battery with extended cycling

The inexpensive sulfur raw material is promising to enable cost-effective redox flow batteries for long duration energy storage. But the catastrophic through-membrane crossover of polysulfides remains a severe challenge resulting in irreversible performance degradation and short cycle life. In this work, we demonstrate that use of a permselective cation exchange membrane yields a two orders of magnitude enhancement in polysulfide retention compared to the benchmark Nafion membrane. Combined physico-chemical, spectroscopic, and microscopic analyses suggest more disordered sidechain structures, which lead to the more hydrophobic nature and smaller hydrophilic domains in the membrane. The microstructural features contribute to the effective mitigation of polysulfide crossover. As a result, the cycle life of polysulfide/ferricyanide flow cells is boosted over a substantially extended test time. This finding sheds light on the fundamental membrane factors that cause polysulfide permeation and can provide feasible directions in the development of permselective membranes for polysulfide flow batteries.

36 MATERIALS SCIENCE↗

Forest residue harvest optimization: spanning the bridge between plant biology and biorefinery performance

Forestry residues have immense potential as alternative feedstocks to petroleum, yet their inherent complexity remains a major challenge to widespread use. Pairing the temporal rhythms of plant biology with biorefinery performance is critical to industrial-scale biorefinery development. Here, we provide the first report of a techno-economic analysis (TEA) and life cycle assessment (LCA) for a model integrated reductive catalytic fractionation (RCF)–molten salt hydrolysis process for forestry residues varying in tree part, species, and phenophase. All forestry residues resulted in net-negative greenhouse gas (GHG) emissions vs. comparable petroleum feedstocks, with GHG emissions potentially reduced >4.0× through composition-based feedstock selection (e.g., harvesting American beech bark in spring vs. summer). Moreover, American beech twigs/branchlets and bark in leafed and emergence phenophases, respectively, had 7.9× lower predicted phenolic minimum selling prices (MSPs) vs. other feedstocks and MSPs within the current global phenolic market range. Hemicellulose content and RCF yield emerged as key parameters impacting GHG emissions and biorefinery revenue, identifying hardwood twigs/branchlets in the leafed phenophase as optimal biofeedstocks. Biorefinery expenses were dominated by purchased equipment, raw materials, and utility costs, highlighting essential areas for future study. Notably, RCF reactor pressures drove 85–90% of equipment costs, but sensitivity analysis revealed that decreasing the pressure 20% could reduce the phenol MSP 4-fold. Structural carbohydrate dynamics were also investigated using a two-step acid hydrolysis method to resolve tissue- and species-level patterns in biomass composition throughout the year to enable harvest optimization based on TEA/LCA findings. Ultimately, elucidating the impact of biofeedstock dynamics on biorefinery performance enables harvest optimization, informed engineering design, and progress towards an expanded bioeconomy.

Shapiro, Alison J. [University of Delaware, Newark↗

2022 roadmap on 3D printing for energy

The energy transition is one of the main challenges of our society and therefore a major driver for the scientific community. To ensure a smart transition to a sustainable future energy scenario different technologies such as energy harvesting using solar cells or windmills and chemical storage in batteries, super-capacitors or hydrogen have to be developed and ultimately deployed. New fabrication approaches based on additive manufacturing and the digitalization of the industrial processes increase the potential to achieve highly efficient and smart technologies required to increase the competitiveness of clean energy technologies against fossil fuels. In this frame, the present roadmap highlights the tremendous potential of 3D printing as a new route to fully automate the manufacturing of energy devices designed as digital files. Additionally, this article gives numerous guidelines to maximize the performance and efficiency of the next generation of 3D printed devices for the energy transition while reducing the waste of critical raw materials. In particular, the paper is focused on the current status, present challenges and the expected and required advances of 3D printing for the fabrication of the most relevant energy technologies such as fuel cells and electrolysers, batteries, solar cells, super-capacitors, thermoelectric generators, chemical reactors and turbomachinery.

36 MATERIALS SCIENCE↗

Quantitative elemental imaging in eukaryotic algae

Abstract All organisms, fundamentally, are made from the same raw material, namely the elements of the periodic table. Biochemical diversity is achieved by how these elements are utilized, for what purpose, and in which physical location. Determining elemental distributions, especially those of trace elements that facilitate metabolism as cofactors in the active centers of essential enzymes, can determine the state of metabolism, the nutritional status, or the developmental stage of an organism. Photosynthetic eukaryotes, especially algae, are excellent subjects for quantitative analysis of elemental distribution. These microbes utilize unique metabolic pathways that require various trace nutrients at their core to enable their operation. Photosynthetic microbes also have important environmental roles as primary producers in habitats with limited nutrient supplies or toxin contaminations. Accordingly, photosynthetic eukaryotes are of great interest for biotechnological exploitation, carbon sequestration, and bioremediation, with many of the applications involving various trace elements and consequently affecting their quota and intracellular distribution. A number of diverse applications were developed for elemental imaging, allowing subcellular resolution, with X-ray fluorescence microscopy (XFM, XRF) being at the forefront, enabling quantitative descriptions of intact cells in a non-destructive method. This Tutorial Review summarizes the workflow of a quantitative, single-cell elemental distribution analysis of a eukaryotic alga using XFM.

59 BASIC BIOLOGICAL SCIENCES↗

Genome organization and botanical diversity

Abstract The rich diversity of angiosperms, both the planet's dominant flora and the cornerstone of agriculture, is integrally intertwined with a distinctive evolutionary history. Here, we explore the interplay between angiosperm genome organization and botanical diversity, empowered by genomic approaches ranging from genetic linkage mapping to analysis of gene regulation. Commonality in the genetic hardware of plants has enabled robust comparative genomics that has provided a broad picture of angiosperm evolution and implicated both general processes and specific elements in contributing to botanical diversity. We argue that the hardware of plant genomes—both in content and in dynamics—has been shaped by selection for rather substantial differences in gene regulation between plants and animals such as maize and human, organisms of comparable genome size and gene number. Their distinctive genome content and dynamics may reflect in part the indeterminate development of plants that puts strikingly different demands on gene regulation than in animals. Repeated polyploidization of plant genomes and multiplication of individual genes together with extensive rearrangement and differential retention provide rich raw material for selection of morphological and/or physiological variations conferring fitness in specific niches, whether natural or artificial. These findings exemplify the burgeoning information available to employ in increasing knowledge of plant biology and in modifying selected plants to better meet human needs.

Biochemistry & Molecular Biology↗

Development of ultra-pure gadolinium sulfate for the Super-Kamiokande gadolinium project

This paper reports the development and detailed properties of about 13 metric tons of gadolinium sulfate octahydrate, Gd 2 (SO 4 ) 3 • 8H 2 O⁠, which has been dissolved into Super-Kamiokande (SK) in the summer of 2020. We evaluate the impact of radioactive impurities in Gd 2 (SO 4 ) 3 • 8H 2 O on diffuse supernova neutrino background searches and solar neutrino observation and confirm the need to reduce radioactive and fluorescent impurities by about three orders of magnitude from commercially available high-purity Gd 2 (SO 4 ) 3 • 8H 2 O⁠. In order to produce ultra-high-purity Gd 2 (SO 4 ) 3 • 8H 2 O, we have developed a method to remove impurities from gadolinium oxide, Gd 2 O 3 , consisting of acid dissolution, solvent extraction, and pH control processes, followed by a high-purity sulfation process. All of the produced ultra-high-purity Gd 2 (SO 4 ) 3 • 8H 2 O is assayed by inductively coupled plasma mass spectrometry and high-purity germanium detectors to evaluate its quality. Because of the long measurement time of high-purity germanium detectors, we have employed several underground laboratories for making parallel measurements including the Laboratorio Subterráneo de Canfranc in Spain, Boulby in the UK, and Kamioka in Japan. In the first half of production, the measured batch purities were found to be consistent with the specifications. However, in the latter half, the Gd 2 (SO 4 ) 3 • 8H 2 O contained one order of magnitude more 228Ra than the budgeted mean contamination. This was correlated with the corresponding characteristics of the raw material Gd 2 O 3 , in which an intrinsically large contamination was present. Based on their modest impact on SK physics, they were nevertheless introduced into the detector. To reduce 228 Ra for the next stage of gadolinium loading to SK, a new process has been successfully established.

79 ASTRONOMY AND ASTROPHYSICS↗

Data-driven predictive probability density function control of fiber length stochastic distribution shaping in refining process

Pulp is the most important raw material in paper in paper industries, whose Fiber Length Stochastic Distribution (FLSD) shaping directly determines the energy consumption and paper quality of the subsequent papermaking processes. However, the mean and variance are insufficient to describe the output FLSD shaping, which display non-Gaussian distribution properties. Therefore, the traditional control, method based on the mean and variance of fiber length is difficult to control the FLSD shaping effectively. In this paper, a novel data-driven predictive probability density function (PDF) control method is proposed for output FLSD shaping in refining process. Primarily, in order to improve the approximation accuracy of the PDF employing RBF neural network, the parameters (center value and width) of each RBF basis functions are tuned via utilizing iterative learning control (ILC) law, and the corresponding estimations of weights law can be obtained. Secondly, considering that the conventional linear model of weights vector has drawbacks of low accuracy and weak generalization ability, random vector functional link networks (RVFLNs) based data driven nonlinear modelling method is employed to characterize the prediction model between the input variables and weights vector. Finally, in order to reduce the randomness of the output FLSD, a minimum entropy control method under mean constraint is employed to design the predictive PDF controller for the output FLSD shaping with the help of the established nonlinear stochastic distribution model. Both simulations and experiments are given to illustrate the effectiveness and practicability of the proposed method.

Probability debsity function, Fiber length distrib↗

A comparison of ceramic and carbon-based reductants for vitrification of low-activity waste

Sucrose is the current baseline additive at the Hanford Waste Treatment and Immobilization Plant in Washington, USA to control foaming during waste feed to glass transitions and the redox state of the glass melt. Alternative reductants are being investigated to alleviate strain on effluent treatment from toxic acetonitrile production from incomplete combustion of sucrose. This study evaluates ceramic additive options including B4C, B6Si, SiC and VB2 in simulated low-activity waste feed, as well as coke dust, probing the feed volume expansion during melting as well as the gas evolution. All alternative reductant options examined significantly reduced acetonitrile production, however there was variability in their effectiveness as foam-reducing agents. VB2 and coke at the appropriate ratios were similarly effective as sucrose in controlling both foam volume and glass redox state, but with considerably less acetonitrile production. B4C, B6Si and SiC showed more promising foam control and very little acetonitrile production, however all of the final glasses were over reduced, i.e., Fe2+/FeT = 0.5. These alternative reductant studies provide operational flexibility to the operation of the vitrification plant, as well as options for alternative raw materials in industrial glass melting.

Rigby, Jessica C. (ORCID:0000000235719977)↗