Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum embedding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Pressure-Thresholded Response in Cylindrically Shocked Cyclotrimethylene Trinitramine (RDX)

We demonstrate a strongly thresholded response in cyclotrimethylene trinitramine (RDX) when it is cylindrically shocked using a novel waveguide geometry. Using ultrafast single-shot multi-frame imaging, we demonstrate that <100 μm diameter single crystals of RDX embedded in a polymer host deform along preferential planes for >100 ns after the shock first arrives in the crystal. We use in situ imaging and time-resolved photoemission to demonstrate that short-lived chemistry occurs with complex deformation pathways. Using scanning electron microscopy and ultra-small-angle X-ray scattering, we demonstrate that the shock-induced dynamics leave behind porous crystals, with pore shapes and sizes that change significantly with shock pressure. A threshold pressure of ~12 GPa at the center of convergence separated the single-mode planar crystal deformations from the chemistry-coupled multi-plane dynamics at higher pressures. Our observations indicate preferential directions for deformation in our cylindrically shocked system, despite the applied stress along many different crystallographic planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimized geometries for cooperative photon storage in an impurity coupled to a two-dimensional atomic array

The collective modes of two-dimensional ordered atomic arrays can modify the radiative environment of embedded atomic impurities. We analyze the role of the lattice geometry on the impurity's emission linewidth by comparing the effective impurity decay rate obtained for all noncentered Bravais lattices and an additional honeycomb lattice. We demonstrate that the lattice geometry plays a crucial role in determining the effective decay rate for the impurity. In particular, we find that the minimal effective decay rate appears in lattices where the number of the impurity's nearest neighbors is maximal and the number of distinct distances among nearest neighbors is minimal. Here we further show that, in the choice between interstitial and substitutional placement of the impurity, the former always wins by exhibiting a lower decay rate and longer photon storage. For interstitial placements, we determine the optimal impurity position in the lattice plane, which is not necessarily found in the center of the lattice plaquette.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Electrochemical Hydrogenation of CO on Cu(100): Insights from Accurate Multiconfigurational Wavefunction Methods

Copper (Cu) remains the most efficacious electrocatalyst for electrochemical CO 2 reduction (CO 2 R). Its activity and selectivity are highly facet-dependent. We recently examined the commonly proposed rate-limiting CO hydrogenation step on Cu(111) via embedded correlated wavefunction (ECW) theory and demonstrated that only this higher-level theory yields predictions consistent with potential-dependent experimental kinetics. Here, to understand the differing activities of Cu(111) and Cu(100) in catalyzing CO 2 R, we explore CO hydrogenation on Cu(100) using ECW theory. We predict that the preferred pathway involves the reduction of adsorbed CO (*CO) to *COH via proton-coupled electron transfer (PCET) at working potentials, although *CHO also may form with a kinetically accessible but higher barrier. In contrast, our earlier work on Cu(111) concluded that *COH and *CHO formation via PCET are equally feasible. Furthermore, this work illustrates one possible origin of the facet dependence of CO 2 R mechanisms and products on Cu electrodes and sheds light on how the selectivity of CO 2 R electrocatalysts can be controlled by the surface morphology.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Binding of noble gas atoms by superhalogens

Because of their closed shells, noble gas (Ng) atoms (Ng = Ne, Ar, Kr, and Xe) seldom take part in chemical reactions, yet finding such mechanisms not only is of scientific interest but also has practical significance. Following a recent work by Mayer et al. [Proc. Natl. Acad. Sci. U. S. A. 116, 8167–8172 (2019)] on the room temperature binding of Ar to a superelectrophilic boron site embedded in a negative ion complex, B 12 (CN) 11 - , we have systematically studied the effect of cluster size and terminal ligands on the interaction of Ng by focusing on B 12 X 11 (Ng) (X = H, CN, and BO) and B 12 X 10 (Ng) 2 (X = CN and BO) whose stabilities are governed by the Wade–Mingos rule and on C 5 BX 5 (Ng) (X = H, F, and CN) and C 4 B 2 (CN) 4 (Ng) 2 whose stabilities are governed by the Huckel’s aromaticity rule. Our conclusion, based on density functional theory, is that both the cluster size and the terminal ligands matter—the interaction between the cluster and the Ng atoms becomes stronger with increasing cluster size and the electron affinity of the terminal ligands. Our studies also led to a counter-intuitive finding—removing multiple terminal ligands can enable electrophilic centers to bind multiple Ng atoms simultaneously without compromising their binding strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

TRUST Nonlinear Dynamics Testbed Assessment

The following assessment evaluates the efficacy of the control script for carrying out a linear signal to generate a linear mechanical response of the system: the TRUST nonlinear dynamics (TRUSTND) testbed. The hardware has three main components: the controller (NI PXIe 8861) embedded in the National Instruments chassis (NI PXIe 1092), the signal amplifier (The Modal Shop Linear Power Amplifier 2050E09) to amplify the output of a custom LabVIEW script, and a shaker (The Modal Shop Electrodynamic Exciter 2075E) where wave spring specimens live and are tested within the attached aluminum testbed (center mass). Different kinds of signals (single-tone, swept frequency and white noise) were sent through this hardware in the E-1 lab space at TA-53. First, the linearity of the setup was tested by specifying a sine wave in the control script and checking the quality of the oscillations in a wave spring (McMaster-Carr 9714K19 [1]). When passing a sine wave through the amplifier was succeeded, the frequency response of the wave spring was tested with white noise for comparison to finite-element model predictions. The testbed outputs a repeatable, linear response to the input excitation when used with the wave spring. These measurements reduce the uncertainty associated with the testbed and test procedure to better characterize uncertainty associated with material behavior (SX358 foam samples) in future tests

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

HSQC spectra of lignin isolated from poplar stems

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from stems of genetically engineered poplar through auxin signaling gene modification. The plants were grown in greenhouse with temperatures between 21 and 23 °C. Plants were harvested and the aboveground stems were cut off an approximately five-inch-long segment from the bottom end of the plant stem, debarked and air-dried for three weeks. The dried stem samples were Wiley milled (mesh size 20), Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extracted biomass was ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was freeze-dried to recover the lignin. The dry stem lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and transferred into a 5 mm tube. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 230 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 2048 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin 3.6 software. Additional meta data is embedded in the raw spectra figures.

HSQC, lignin, poplar, stems, CBI↗
DOE OSTI2024

Two-dimensional heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from field grown transgenic poplar

Here we present a curated dataset of a series of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a field grown transgenic poplar engineered with a monolignol 4-O-methyltransferase (MOMT4). The poplar was collected from a 2-year-old rotation trees within a three-year field trial experiment. The poplar was Soxhlet-extracted with toluene/ethanol and the extractives-free poplar was then ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was extracted twice with 96:4 (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover the lignin. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide for NMR experiments. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence (hsqcetgpsisp2.2) on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 220 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. All the data was processed using the Bruker’s TopSpin 3.6 software. The NMR spectra provides structural characteristics information about lignin in field grown transgenic MOMT4 poplar. Additional meta data is embedded in the raw spectra figures.

Lignin structure, HSQC, poplar, field trial, MOMT4↗
DOE OSTI2020

Dynamically controlled random lasing with colloidal titanium carbide MXene

Control of lasing properties through tailorable and dynamically tunable materials and reconfigurable compositions can augment the performance of random lasers for a wide range of applications. Here, a colloid of randomly dispersed weakly scattering single-layer titanium carbide (Ti 3 C 2 T x ) MXene flakes embedded within rhodamine 101 gain medium is experimentally shown to provide feedback for random lasing. Additionally, in contrast to previously reported random laser systems where the optical properties of scatterers are static, the relative permittivity of Ti 3 C 2 T x MXene flakes can be varied under optical pumping due to the saturable absorption properties. Numerical simulations indicate that the observed nonlinear response of Ti 3 C 2 T x MXene flakes enables dynamically tunable random lasing. Thus, pumping the Ti 3 C 2 T x MXene flakes with a second optical source decreases the gain threshold required to obtain random lasing. Also, using numerical simulations, it is shown that the control over the intensity of the second pump enables tuning the field distribution of the random lasing modes. Considering the diversity of the MXenes family, the proposed MXene colloidal metamaterial design opens up a new avenue to advanced control of lasing properties for photonic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A weighted Shifted Boundary Method for free surface flow problems

The Shifted Boundary Method (SBM) belongs to the class of unfitted (or immersed, or embedded) finite element methods and was recently introduced for the Poisson, linear advection/diffusion, Stokes, Navier-Stokes, acoustics, and shallow-water equations. By reformulating the original boundary value problem over a surrogate (approximate) computational domain, the SBM avoids integration over cut cells and the associated problematic issues regarding numerical stability and matrix conditioning. Accuracy is maintained by modifying the original boundary conditions using Taylor expansions. Hence the name of the method, that shifts the location and values of the boundary conditions. In this article, we extend the SBM to the simulation of incompressible Navier-Stokes flows with moving free-surfaces, by appropriately weighting its variational form with the elemental volume fraction of active fluid. This approach prevents spurious pressure oscillations in time, which would otherwise be produced if the total active fluid volume were to change abruptly over a time step. In fact, the proposed weighted SBM method induces small mass (i.e., volume) conservation errors, which converge quadratically in the case of piecewise-linear finite element interpolations, as the grid is refined. Finally, we present an extensive set of two- and three-dimensional tests to demonstrate the robustness and accuracy of the method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Kerr effective black hole geometries in supergravity

We derive the explicit embedding of the effective Kerr spacetimes, which are pertinent to the vanishing of static Love numbers, soft hair descriptions of Kerr black holes, and low-frequency scalar-Kerr scattering amplitudes, as solutions within 𝑁 = 2 supergravity. These spacetimes exhibit a hidden 𝑆⁢𝐿⁡(2,𝑅) × 𝑈⁡(1) or 𝑆⁢𝑂⁡(4,2) symmetry resembling the so called subtracted geometries with 𝑆⁢𝐿⁡(2,𝑅) × 𝑆⁢𝐿⁡(2,𝑅) symmetry, which accurately represent the near-horizon geometry of Kerr black holes and, as we will argue most accurately represents the internal structure of the Kerr black hole. To quantify the differences among the effective Kerr spacetimes, we compare their physical quantities, internal structures, and geodesic equations. Although their thermodynamic properties, including entropy, match those of Kerr, our study uncovers significant differences in the interiors of these effective Kerr solutions. A careful examination of the internal structure of the spacetimes highlights the distinctions between various effective Kerr geometries and their quasinormal spectra.

quantum aspects of black holes↗
DOE OSTI2022

Experimental quantification of the impact of heterogeneous mix on thermonuclear burn

In inertial confinement fusion, deuterium–tritium (DT) fuel is brought to densities and temperatures where fusion ignition occurs. However, mixing of the ablator material into the fuel may prevent ignition by diluting and cooling the fuel. MARBLE experiments at the National Ignition Facility provide new insight into how mixing affects thermonuclear burn. These experiments use laser-driven capsules containing deuterated plastic foam and tritium gas. Embedded within the foam are voids of known sizes and locations, which control the degree of heterogeneity of the fuel. Initially, the reactants are separated, with tritium concentrated in the voids and deuterium in the foam. During the implosion, mixing occurs between the foam and gas materials, leading to DT fusion reactions in the mixed region. Here, it is shown that by measuring the ratios of DT and deuterium–deuterium neutron yields for different macropore sizes and gas compositions, the effects of mix heterogeneity on thermonuclear burn may be quantified, supporting an improved understanding of these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Dual-Wavelength Simultaneous Patterning of Degradable Thermoset Supports for One-Pot Embedded 3D Printing

Vat photopolymerization (VP) techniques have enabled the fabrication of complex geometries while balancing high precision and fast processing times. 3D printed objects are traditionally built layer-by-layer with newly cured layers being structurally supported by previous ones. Fabricating unsupported features such as overhangs and arches risks misalignment and sagging, limiting the range of accessible designs. To overcome this issue, support structures are fabricated along with the primary object as temporary scaffolds that provide stability and conserve print fidelity. For VP specifically, patterning dissolvable sacrificial supports is attractive to avoid manual removal after printing. In this study, we demonstrate a base-degradable thermoset to pattern print supports in a one-pot formulation along with the primary structural material. Efficient printing is enabled using a dual-wavelength negative imaging (DWNI) DLP printer that patterns the degradable thermoset with visible light and the permanent network with UV light, which are simultaneously projected using a single digital micromirror device (DMD). Printed objects undergo thermal postprocessing to enhance the final conversion of the primary material, after which thermoset supports are degraded in a basic, aqueous solution. This approach provides a robust method for the dual-wavelength patterning of sacrificial thermoset supports, broadening the range of accessible 3D printable materials and geometries.

3D printing↗
DOE OSTI2022

Observation of conformational dynamics in single light-harvesting proteins from cryptophyte algae

Photosynthetic organisms use pigment–protein complexes to capture the sunlight that powers most life on earth. Within these complexes, the position of the embedded pigments is all optimized for light harvesting. At the same time, the protein scaffold undergoes thermal fluctuations that vary the structure, and, thus, photophysics, of the complexes. While these variations are averaged out in ensemble measurements, single-molecule spectroscopy provides the ability to probe these conformational changes. We used single-molecule fluorescence spectroscopy to identify the photophysical substates reflective of distinct conformations and the associated conformational dynamics in phycoerythrin 545 (PE545), a pigment–protein complex from cryptophyte algae. Rapid switching between photophysical states was observed, indicating that ensemble measurements average over a conformational equilibrium. A highly quenched conformation was also identified, and its population increased under high light. This discovery establishes that PE545 has the characteristics to serve as a photoprotective site. Finally, unlike homologous proteins from the evolutionarily related cyanobacteria and red algae, quenching was not observed upon photobleaching, which may allow for robust photophysics without the need for rapid repair or replacement machinery. Collectively, these observations establish the presence of a rich and robust set of conformational states of PE545. Cryptophytes exhibit particularly diverse energetics owing to the variety of microenvironments in which they survive, and the conformational states and dynamics reported here may provide photophysical flexibility that contributes to their remarkable ability to flourish under diverse conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dynamic embedding of effective harmonic normal mode vibrations in all-atomistic energy gap fluctuations: Case study of light harvesting 2 complex

Environmental effects in excitation energy transfer have mostly been modeled by baths of harmonic oscillators, but to what extent such modeling provides a reliable description of actual interactions between molecular systems and environments remains an open issue. Here, we address this issue by investigating fluctuations in the excitation energies of the light harvesting 2 complex using a realistic all-atomistic simulation of the potential energy surface. Our analyses reveal that molecular motions exhibit significant anharmonic features, even for underdamped intramolecular vibrations. In particular, we find that the anharmonicity contributes to the broadening of spectral densities and substantial overlaps between neighboring peaks, which complicates the meaning of mode frequencies constituting a bath model. Thus, we develop a strategy to construct a minimally underdamped harmonic bath that has a clear connection to all-atomistic dynamics by utilizing actual normal modes of molecules but optimizing their frequencies such that the resulting bath model can best reproduce the all-atomistic simulation results. By subtracting the underdamped contribution from the entire fluctuations, we also show that identifying a residual spectral density representing all other contributions with overdamped behavior is possible. We find that this can be fitted well with a well-established analytic form of a spectral density function or, alternatively, modeled as explicit time dependent fluctuations with muti-exponential or power law type correlation functions. We provide an assessment and the implications of these possibilities. The approach presented here can also serve as a general strategy to construct a simplified bath model that can effectively represent the underlying all-atomistic bath dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Preshot Report for the NIF Discovery Science DDCyl Campaign: D_Hyd_DDCyl_DRT_DDD/EEE/FFF

The first Discovery Science shot day with the NIF DDCyl campaign demonstrated that Rayleigh-Taylor instability growth during the deceleration phase is scale-invariant for targets that varied in radial dimension and implosion time-scale by a factor of three. Smaller cylindrical implosions at the OMEGA laser facility were compared to the larger cylinders fielded in our first NIF outing. Both sets of targets had an initial m = 20 sinusoidal perturbation machined on the inner surface of an embedded aluminum marker layer, with the amplitude larger by the same factor of three for the NIF-scale targets. We observed growth factors of 14 at late time (t=λ = 7:7 ns, where λ = 1 for OMEGA and λ = 3 for NIF). These used a high density (300 mg/cm³) CH foam core, providing a very long period of deceleration before the rebounding shock hit the incoming spike tips, but the final convergence was only CR≈ 2:25. For our second shot day with this campaign, we are attempting to increase the convergence ratio to CR≥ 5 before reshock, while still measuring instability growth during the convergence/deceleration phase. As discussed in previous reports, the best way to increase convergence before reshock is to lower the density of the central foam. The preshot designs called for the use of a 30 mg/cm³ CH foam, though the as-built foams are closer to 40-42 mg/cm³, which is predicted to result in a final CR≈ 5:1 before reshock. Other than the lower foam density, the target design is identical to those used previously.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Tetragonal BaCoO 3 : A Co 4+ Ferromagnetic Mott Insulator

We report the stabilization of the metastable body-centered tetragonal (BCT) phase of BaCoO 3 (BCT-BaCoO 3 ) under high-pressure (15 GPa) and hightemperature (1200 °C) conditions using a mixture precursor. This double perovskite adopts the EuTiO 3 -type structure (space group I4/mcm), as confirmed by powder Xray diffraction and high-resolution STEM. X-ray photoelectron spectroscopy indicates a predominant Co 4+ oxidation state without detectable oxygen vacancies. Magnetization and heat capacity measurements reveal ferromagnetic ordering at T C ∼ 107 K, attributable to the BCT-BaCoO 3 phase. Above this temperature, the mixed-phase sample exhibits Curie−Weiss paramagnetism, a low-spin to high-spin crossover upon cooling, and a possible intermediate-spin state at elevated temperatures. Resistivity data indicates insulating behavior with weak magnetoresistance. DFT and DFT + DMFT calculations suggest that the insulating state originates from an orbitally selective transition sensitive to the nominal valence of the Co-d shell. The metastable BCT-BaCoO 3 phase cannot be retained in pure form at ambient pressure but can be stabilized by embedding it in a disordered mixture, offering a potential route to discover and preserve other high-pressure phases under ambient conditions.

Magnetic properties↗
DOE OSTI2024

HSQC spectra of lignin isolated from poplar roots

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from roots of a greenhouse grown natural population of an energy crop poplar (Populus trichocarpa). Dormant cuttings of field-grown poplar were grown in 6-liter pots in a peat-based media containing bark, perlite, vermiculite, dolomite lime and a wetting agent in an environmentally controlled greenhouse. Temperatures were between 21 and 23 °C, with supplemental lighting to support a 16-h day length using 1000-watt high-pressure sodium lights in greenhouse. Once established, all plants were cut-back, allowed to regrow and harvested at the same time following an eight-month long growth period. Plants were harvested and the belowground roots were washed off soils, blotted, dried in an oven at 70 °C for 3 days, and Wiley milled (mesh size 20). The roots were Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extracted roots were ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was extracted twice with 96% (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and transferred into a 5 mm tube. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 220 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin software. Additional meta data is embedded in the raw spectra figures.

HSQC, lignin, poplar, roots, CBI↗
DOE OSTI2020

Density functional theory calculation of helium segregation and decohesion effect in W110/Ni111 interphase boundary

Density functional theory (DFT) is employed to study the preferential distribution and decohesion effect of He in a W-NiFe composite consisting of W particles embedded in an Ni-based solid solution matrix. A slab containing {110}<100>W//{111}<110>Ni interface is employed as a surrogate model for the W-NiFe system. Firstly, the fracture energy of the W/Ni interphase boundary (IB) (4.37 J/m 2 ) is higher than the cleavage energy of Ni{111} (3.82 J/m^2) and lower than the cleavage energy of W{110} (6.60 J/m 2 ). The comparison shows that the cohesion of the IB is stronger than the Ni{111} planes that are away from the IB. However, the cohesion between the Ni{111} planes adjacent to the IB is found to be the weakest in this system, with a cleavage energy of 3.11 J/m 2 . Subsequently, formation energy of He is calculated in the Ni slab, W slab, and various interstitial sites in the IB. The DFT calculations show that He is significantly more stable in Ni than in W, by about 1.75 eV. Interestingly, He does not prefer to segregate at the IB as compared to bulk Ni. Nevertheless, it prefers to segregate to the region between the Ni{111} planes adjacent to the IB, and decreases the cohesion of the already weakest region. Based on an estimated amount of He gas production in 5 years under first wall neutron irradiation (neutron flux of 1.04x10 15 n/cm 2 /s), the He will decrease the cleavage energy of the weakest region by 21.2%, 15.4%, and 12.2% at 800, 1000, and 1200 C, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗