Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Ge/SrTiO{sub 3}(001): Correlation between interface chemistry and crystallographic orientation

In this work, the desorption of a submonolayer deposit of Ge on SrTiO{sub 3}(001) is studied by reflection high energy electron diffraction. The results are compared to those of a previous experiment done using soft x-ray photoelectron spectroscopy. Combining these techniques allows for correlating interface chemistry and crystal orientation, and for bringing clarifying elements concerning the competition between (111) and (001) crystal orientation typical for the semiconductor/perovskite epitaxial systems. Despite poor interface matching, (111)-oriented islands are stabilized at the expense of (001)-oriented islands due to the relatively low energy of their free facets. Such 'surface energy driven' crystallographic orientation of the deposit is enhanced by the low adhesion energy characteristic of the Ge/SrTiO{sub 3} system.

36 MATERIALS SCIENCE↗

Atomic orientation following predissociation of the C {sup 3}{Pi}{sub g} Rydberg state of molecular oxygen

(2 + 1) resonance enhanced multiphoton ionization in combination with time-of-flight mass spectroscopy (TOF-MS) has been used to detect both the O({sup 3}P) and O({sup 1}D) fragments produced as a result of predissociation of the C {sup 3}{Pi}{sub g} (v= 0) and (v= 1) Rydberg states of O{sub 2}, accessed via two-photon absorption from the ground X {sup 3}{Sigma}{sub g}{sup -} state. In particular, TOF profiles have been recorded at various fixed two-photon absorption wavelengths within the two bands, with circular polarized probe laser light used to probe the angular momentum orientation of these photofragments. All photofragments are found to display coherent orientation resulting from interference between two possible two-photon absorption pathways. The measured orientation is affected by rotational depolarization due to the long lifetime of the excited C state; once this effect is accounted for the orientation is found to be nearly constant over all dissociation wavelengths. The origin of the coherent orientation is attributed to two-photon absorption to different spin-orbit components of the C state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comprehensive study of Al-induced layer-exchange growth for orientation-controlled Si crystals on SiO{sub 2} substrates

Orientation-controlled crystalline Si films on insulating substrates are strongly required to achieve high-performance thin-film devices for next-generation electronics. We have comprehensively investigated the layer-exchange kinetics of Al-induced crystallization (AIC) in stacked structures, i.e., amorphous-Si/Al-oxide/Al/SiO{sub 2}-substrates, as a function of the air-exposure time of Al surfaces (t{sub air}: 0–24 h) to form Al-oxide interface-layers, the thickness of Al and Si layers (d{sub Al,} d{sub Si}: 50–200 nm), the annealing temperature (450–500 °C), and the annealing time (0–50 h). It has been clarified that longer t{sub air} (>60 min) and/or thinner d{sub Al} and d{sub Si} (<50 nm) lead to the (111) oriented growth; in contrast, shorter t{sub air} (<60 min) and/or thicker d{sub Al} and d{sub Si} (>100 nm) lead to the (100) oriented growth. No correlation between the annealing temperature and the crystal orientation is observed. Detailed analysis reveals that the layer-exchange kinetics are dominated by “supply-limited” processing, i.e., diffusion of Si atoms into Al layers through Al-oxide layer. Based on the growth rate dependent Si concentration profiles in Al layers, and the free-energy of Si at Al-oxide/Al or Al/SiO{sub 2} interfaces, a comprehensive model for layer-exchange growth is proposed. This well explains the experimental results of not only Si-AIC but also another material system such as gold-induced crystallization of Ge. In this way, a growth technique achieving the orientation-controlled Si crystals on insulating substrates is established from both technological and scientific points of view.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal orientation dependence of band matching in all-B2-trilayer current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co{sub 2}Fe(Ge{sub 0.5}Ga{sub 0.5}) Heusler alloy and NiAl spacer

We have experimentally investigated the crystal orientation dependence of band matching in current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) pseudo-spin-valves using Co{sub 2}Fe(Ge{sub 0.5}Ga{sub 0.5}) (CFGG) Heusler alloy ferromagnetic layer and NiAl spacer. The high quality epitaxial CFGG/NiAl/CFGG all-B2-trilayers structure devices were fabricated on both MgO(001) and sapphire (112{sup ¯}0) single crystal substrates to create (001) and (110) crystal orientations. Same magneto-transport properties were observed from these two differently orientated devices indicating that there is no or little orientation dependence of band matching on MR output. We also found that all-B2-trilayer structure was free of lattice matching influence depending on the crystal orientation, which made it a good candidate for CPP-GMR device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites

Fiber orientations in metal matrix composites have significant effect on improving tensile properties. Control of fiber orientations in metal injection molded metal composites is a difficult task. In this study, two mold cavities of dimensions 6x6x90 mm and 10x20x180 mm were used for comparison of fiber orientation in injection molded metal composites test parts. In both mold cavities, convergent and divergent flows were developed by modifying the sprue dimensions. Scanning electron microscope (SEM) was used to examine the fiber orientations within the test samples. The results showed highly aligned fiber in injection molded test bars developed from the convergent melt flow. Random orientation of fibers was noted in the composites test bars produced from divergent melt flow.

36 MATERIALS SCIENCE↗

Control of liquid crystal molecular orientation using ultrasound vibration

We propose a technique to control the orientation of nematic liquid crystals using ultrasound and investigate the optical characteristics of the oriented samples. An ultrasonic liquid crystal cell with a thickness of 5–25 μm and two ultrasonic lead zirconate titanate transducers was fabricated. By exciting the ultrasonic transducers, the flexural vibration modes were generated on the cell. An acoustic radiation force to the liquid crystal layer was generated, changing the molecular orientation and thus the light transmission. By modulating the ultrasonic driving frequency and voltage, the spatial distribution of the molecular orientation of the liquid crystals could be controlled. The distribution of the transmitted light intensity depends on the thickness of the liquid crystal layer because the acoustic field in the liquid crystal layer is changed by the orientational film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of substrate orientation on the growth of InSb nanostructures by molecular beam epitaxy

In this work, the effects of substrate orientation on InSb quantum structure growth by molecular beam epitaxy (MBE) are presented. Motivated by the observation that (411) evolves naturally as a stable facet during MBE crystal growth, comparison studies have been carried out to investigate the effects of the crystal orientation of the underlying GaSb substrate on the growth of InSb by MBE. By depositing InSb on a number of different substrate orientations, namely: (100), (311), (411), and (511), a higher nanostructure density was observed on the (411) surface compared with the other orientations. This result suggests that the (411) orientation presents a superior surface in MBE growth to develop a super-flat GaSb buffer surface, naturally favorable for nanostructure growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inversionless amplification of light by molecules selectively oriented over states in the field of laser radiation

A possibility of inversionless amplification of light by non-dipole molecules oriented state-selectively by means of superimposing of external laser radiation is considered. Various variants of mutual direction of electrical vectors of the probe and orienting fields are numerically analysed for specific ratios of the orientation parameters of the ground and excited states both in pulsed and stationary regimes. It is shown that the variant in which the signs of the orientation parameters of the ground and excited states are opposite is the most promising. The latter can be implemented in selection of the orienting field frequency. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable molecular orientation and elevated thermal stability of vapor-deposited organic semiconductors

Significance Glasses are solids that lack the regular order of crystals. Organic glasses, when produced by deposition from the vapor, can exhibit high levels of molecular orientation that improve performance of devices such as organic light-emitting diodes. We show here that molecular orientation in such glasses is primarily controlled by the substrate temperature during deposition, suggesting that the performance of almost any device based upon amorphous organic materials might be systematically optimized by this route. We explain molecular orientation in the glass in terms of the orientation present near the surface of the corresponding liquid. The highly oriented glasses formed here also exhibit high density and improved thermal stability. These features will likely further enhance the performance of organic electronics devices.

36 MATERIALS SCIENCE↗

Parity-selective enhancement of field-free molecular orientation in an intense two-color laser field

We investigated the characteristics of molecular orientation induced by a nonresonant two-color femtosecond laser field. By analyzing the rotational dynamics of asymmetric linear molecules, we revealed that the critical parameter in characterizing the molecular orientation was the hyperpolarizability of molecules that selected the excitation paths of rotational states between parity-changing and parity-conserving transitions. Especially, in the case of molecules with small hyperpolarizability, a significant enhancement of orientation was achieved at the half-rotational period, instead of the full-rotational period. This deeper understanding of the hyperpolarizability-dependent characteristics of molecular orientation in a two-color scheme can provide an effective method to achieve significantly enhanced field-free orientation for various polar molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

''Cube-on-hexagon'' orientation relationship for Fe on GaN(0001): The missing link in bcc/hcp epitaxy

We investigate, experimentally and theoretically, the epitaxy of body-centered-cubic Fe on hexagonal GaN. For growth on the Ga-polar GaN(0001) surface we find the well-known Pitsch-Schrader orientation relationship between Fe and GaN. On the N-polar GaN(0001) surface we observe coexistence between the familiar Burgers orientation and a new orientation in which the Fe(001) plane is parallel to GaN(0001). This 'cube-on-hexagon' orientation constitutes the high-symmetry link required for constructing a symmetry diagram for bcc/hcp systems in which all orientation relationships are connected by simple rotations.

36 MATERIALS SCIENCE↗

Influence of crystal orientation on pattern formation of focused-ion-beam milled Cu surfaces

The erosion profiles of Cu surfaces after focused ion beam sputtering have been investigated as a function of crystal orientation and ion beam incidence. We find that all patterns are aligned with crystallographic axes and have wavelengths of about 0.5{mu}m. The patterns depend strongly on the crystal orientation, typically with similar patterns for neighboring orientations, but may also be influenced by the ion beam direction. For orientations close to (100), we find however that surfaces stay smooth for all incidence angles. The results are discussed in the context of current continuum models and indicate that modifications to the models are required to account for the effect of crystal orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-F-T-581: The Effect of Scanning Orientation On New EBT-XD Film Using Vidar and Epson Scanners

Purpose: To study the effect of film scanning orientation for new EBT-XD film using Vidar and Epson scanners, compared with EBT3 films. Methods: The EBT-XD (lot#01081501) and EBT3 films (lot#11031501) were cut into 4cm×7cm pieces and each film piece was uniformly exposed to a 6MV photon beam (15×15cm{sup 2}) at 5 cm depth and 100cm SAD in polystyrene phantom, one at a time. The doses delivered were 0,2.5,5,10,20,30,40 and 50 Gy for EBT-XD films, and 0,0.5,1,2,4,8,12 and 16 Gy for EBT3 films, respectively. All films were scanned at least 16 hours after irradiation, one at a time, in portrait or landscape orientation, using a Vidar DosimetryPro Advantage Red and an Epson 10000XL scanner (red channel). Each film piece was positioned at the center of a frame (36cm×36cm) with a cutout slightly larger than the film size for scanning. The scanned data (71 dpi), were analyzed using ImageJ and the average in the ROI (3cm×3cm) of each film at the center was obtained. Results: Dose response curves (netOD vs. dose) were established and compared with EBT-XD and EBT3 film in portrait or landscape orientation using these two scanners. The portrait to landscape (P/L) ratio for each film/scanner combination was determined. The EBT-XD film is about three times less sensitive than EBT3 film. The netOD is higher for portrait than landscape orientation for all the film/scanner combinations. For EBT-XD and EBT3, the average P/L ratios are 1.02 and 1.03 using Vidar scanner, and 1.03 and 1.05 using Epson scanner (red channel), respectively. Conclusion: The effect of film scanning orientation for new EBT-XD film using Vidar Advantage Red and Epson 10000XL scanners has been studied, in comparison with EBT3 film. The portrait/landscape ratios are the lowest for EBT-XD film using Vidar Advantage Red scanner among the four film/scanner combinations.

60 APPLIED LIFE SCIENCES↗

Polarization Manipulation via Orientation Control in Polycrystalline BiFeO 3 Thin Films on Biaxially Textured, Flexible Metallic Tapes

(111)-, (101)-, and (001)-oriented polycrystalline BiFeO3 films were fabricated on rolling-assisted biaxially textured substrates (RABiTS) with appropriate, buffer layer engineering of heteroepitaxially grown buffer multilayers on RABiTS. The crystallographic orientation and polarization direction were confirmed using X-ray diffraction and piezoresponse force microscopy (PFM), respectively. All the films exhibited excellent ferroelectric properties. Switching spectroscopy PFM demonstrated that the switching polarization in (111)-oriented polycrystalline BiFeO3 films is higher than (101) or (001) oriented films. These high-quality, BiFeO3 films on low-cost, flexible, biaxially textured metallic tapes with controllable orientation and polarization are attractive for application in flexible ferroelectric devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of spaceflight on ocular counterrolling and the spatial orientation of the vestibular system

We recorded the horizontal (yaw), vertical (pitch), and torsional (roll) eye movements of two rhesus monkeys with scleral search coils before and after the COSMOS Biosatellite 2229 Flight. The aim was to determine effects of adaptation to microgravity on the vestibulo-ocular reflex (VOR). The animals flew for 11 days. The first postflight tests were 22 h and 55 h after landing, and testing extended for 11 days after reentry. There were four significant effects of spaceflight on functions related to spatial orientation: (1) Compensatory ocular counterrolling (OCR) was reduced by about 70% for static and dynamic head tilts with regard to gravity. The reduction in OCR persisted in the two animals throughout postflight testing. (2) The gain of the torsional component of the angular VOR (roll VOR) was decreased by 15% and 50% in the two animals over the same period. (3) An up-down asymmetry of nystagmus, present in the two monkeys before flight was reduced after exposure to microgravity. (4) The spatial orientation of velocity storage was shifted in the one monkey that could be tested soon after flight. Before flight, the yaw axis eigenvector of optokinetic afternystagmus was close to gravity when the animal was upright or tilted. After flight, the yaw orientation vector was shifted toward the body yaw axis. By 7 days after recovery, it had reverted to a gravitational orientation. We postulate that spaceflight causes changes in the vestibular system which reflect adaptation of spatial orientation from a gravitational to a body frame of reference. These changes are likely to play a role in the postural, locomotor, and gaze instability demonstrated on reentry after spaceflight.

Non-NASA Center↗

FIBER ORIENTATION IN INJECTION MOLDED LONG CARBON FIBER THERMOPLASTIC COMPOSITES

A set of edge-gated and center-gated plaques were injection molded with long carbon fiber-reinforced thermoplastic composites, and the fiber orientation was measured at different locations of the plaques. Autodesk Simulation Moldflow Insight (ASMI) software was used to simulate the injection molding of these plaques and to predict the fiber orientation, using the anisotropic rotary diffusion and the reduced strain closure models. The phenomenological parameters of the orientation models were carefully identified by fitting to the measured orientation data. The fiber orientation predictions show very good agreement with the experimental data.

carbon fiber↗

New Method for Rapid Measurement of Orientations and Sizes of Grains in Multicrystalline Silicon Wafers

We describe a new technique for rapid measurement of orientations and sizes of various grains in a multicrystalline silicon (mc-Si) wafer. The wafer is texture etched to expose (111) faces nearest to each surface. Because grains of different orientations result in uniquely different texture shapes, they also have well-defined reflectance values. Hence, the process of determining the grain orientations is brought down to making reflectance maps. Reflectance maps are produced by PVSCAN or reflectometer (GT FabScan), and then transformed into orientation maps. Because the grain boundaries are very well delineated in the reflectance maps, they are also excellent for making measurements of size and distribution of grains. We will compare the results of this technique with other standard techniques.

14 SOLAR ENERGY↗

Layer-by-Layer Synthesis of Thick Mesoporous TiO 2 Films with Vertically Oriented Accessible Nanopores and Their Application for Lithium-Ion Battery Negative Electrodes

TiO 2 films of varying thicknesses (up to ≈1.0 µm) with vertically oriented, accessible 7–9 nm nanopores are synthesized using an evaporation-induced self-assembly layer-by-layer technique. The hypothesis behind the approach is that epitaxial alignment of hydrophobic blocks of surfactant templates induces a consistent, accessible mesophase orientation across a multilayer film, ultimately leading to continuous, vertically aligned pore channels. Characterization using grazing incidence X-ray scattering, scanning electron microscopy, and impedance spectroscopy indicates that the pores are oriented vertically even in relatively thick films (up to 1 µm). These films contain a combination of amorphous and nanocrystalline anatase titania of value for electrochemical energy storage. When applied as negative electrodes in lithium-ion batteries, a capacity of 254 mAh g -1 is obtained after 200 cycles for a single-layer TiO 2 film prepared on modified substrate, higher than on unmodified substrate or nonporous TiO 2 film, due to the high accessibility of the vertically oriented channels in the films. Thicker films on modified substrate have increased absolute capacity because of higher mass loading but a reduced specific capacity because of transport limitations. These results suggest that the multilayer epitaxial approach is a viable way to prepare high capacity TiO 2 films with vertically oriented continuous nanopores.

25 ENERGY STORAGE↗