Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observations - galaxies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Observed changes in hydroclimate attributed to human forcing

Observational and modeling studies indicate significant changes in the global hydroclimate in the twentieth and early twenty-first centuries due to anthropogenic climate change. In this review, we analyze the recent literature on the observed changes in hydroclimate attributable to anthropogenic forcing, the physical and biological mechanisms underlying those changes, and the advantages and limitations of current detection and attribution methods. Changes in the magnitude and spatial patterns of precipitation minus evaporation (P–E) are consistent with increased water vapor content driven by higher temperatures. While thermodynamics explains most of the observed changes, the contribution of dynamics is not yet well constrained, especially at regional and local scales, due to limitations in observations and climate models. Anthropogenic climate change has also increased the severity and likelihood of contemporaneous droughts in southwestern North America, southwestern South America, the Mediterranean, and the Caribbean. An increased frequency of extreme precipitation events and shifts in phenology has also been attributed to anthropogenic climate change. While considerable uncertainties persist on the role of plant physiology in modulating hydroclimate and vice versa, emerging evidence indicates that increased canopy water demand and longer growing seasons negate the water-saving effects from increased water-use efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Warm air intrusions reaching the MOSAiC expedition in April 2020—The YOPP targeted observing period (TOP)

In the spring period of the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, an initiative was in place to increase the radiosounding frequency during warm air intrusions in the Atlantic Arctic sector. Two episodes with increased surface temperatures were captured during April 12–22, 2020, during a targeted observing period (TOP). The large-scale circulation efficiently guided the pulses of warm air into the Arctic and the observed surface temperature increased from -30°C to near melting conditions marking the transition to spring, as the temperatures did not return to values below -20°C. Back-trajectory analysis identifies 3 pathways for the transport. For the first temperature maximum, the circulation guided the airmass over the Atlantic to the northern Norwegian coast and then to the MOSAiC site. The second pathway was from the south, and it passed over the Greenland ice sheet and arrived at the observational site as a warm but dry airmass due to precipitation on the windward side. The third pathway was along the Greenland coast and the arriving airmass was both warm and moist. The back trajectories originating from pressure levels between 700 and 900 hPa line up vertically, which is somewhat surprising in this dynamically active environment. The processes acting along the trajectory originating from 800 hPa at the MOSAIC site are analyzed. Vertical profiles and surface energy exchange are presented to depict the airmass transformation based on ERA5 reanalysis fields. The TOP could be used for model evaluation and Lagrangian model studies to improve the representation of the small-scale physical processes that are important for airmass transformation. A comparison between MOSAiC observations and ERA5 reanalysis demonstrates challenges in the representation of small-scale processes, such as turbulence and the contributions to various terms of the surface energy budget, that are often misrepresented in numerical weather prediction and climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Monthly Mean In Situ Surface Flux Observations Paired with Satellite-Derived and Reanalysis-Based Flux Data for the Great Lakes Region, 2001–2020

Surface radiative and turbulent heat fluxes over the Great Lakes strongly influence regional hydrological and meteorological processes, and their accurate representation is critical for numerical weather prediction and coupled atmosphere–lake modeling. However, direct flux observations are spatially sparse across the region, so gridded reanalysis and satellite-derived products are often used for climatological analyses and model evaluation despite differences in their flux representations. This dataset provides processed, quality-controlled, monthly mean surface flux observations from the Great Lakes Evaporation Network (GLEN), AmeriFlux, and the National Data Buoy Center, paired with spatiotemporally matched flux estimates from two reanalysis products, the fifth generation European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis dataset (ERA5) and the Modern Era Reanalysis for Research and Applications, version 2 (MERRA-2), and two satellite-derived products, the Clouds and Earth's Radiant Energy Systems Energy Balanced and Filled (CERES-EBAF) and the Cloud, Albedo and Surface Radiation dataset from AVHRR data - Edition 3 (CLARA-A3). The dataset includes sixteen observational stations with variable temporal coverage within 2001–2020. For each station, a CSV file contains monthly time series of available flux variables, including surface downwelling shortwave radiation (SW), surface downwelling longwave radiation (LW), sensible heat (SH) flux, and latent heat flux (LH), alongside matched gridded product values where available. Columns in the CSV file correspond to different variables sourced from each dataset, with column titles structured as "{dataset}_{variable}". Columns with relevant metadata are also provided in each CSV file, including station latitude and longitude, monthly timestamps, and the name of the sourced observational data. These files are structured for direct use in common analysis tools, including Microsoft Excel, Python pandas, and Python matplotlib. This dataset supports climatological analysis of the Great Lakes regional surface energy budget, evaluation of satellite-derived and reanalysis-based flux products, and development or validation of flux representations in numerical weather prediction and coupled atmosphere–lake models.

Great Lakes↗
DOE OSTI2021

Observations and Modeling of Fiber-Optics Strain on Hydraulic Fracture Height Growth in HFTS-2

Understanding fracture height growth can be of great significance to optimizing field development and improving recovery. The Hydraulic Fracturing Test Site 2 (HFTS-2) has provided a unique opportunity and an advanced dataset to allow us to observe and understand fracture geometries rigorously. Low frequency distributed acoustic sensing (LF-DAS) data from a vertical well in HFTS-2 showed three key observations: (i) excessive upward height growth (>1000 ft) and limited downward growth of the hydraulic fractures during pumping, (ii) considerable additional upward fracture height growth (~300 ft) after well shut in, and (iii) very complex LF-DAS strain rate patterns for a small fiber-to-stage offset. Advanced geomechanical modeling was performed to simulate the hydraulic fracture propagation and the resulting strain responses in the vertical direction. The modeling results demonstrated asymmetric upward and downward fracture height growths as observed in HFTS-2 with a similar upward height growth rate. Simulated waterfall plots of vertical strain rate showed distinct patterns for different fiber-to-fracture distances. The upward-growing fracture tip can be clearly identified by the interfaces between compressing and extending zones. It was also found that the complex strain rate patterns observed in HFTS-2 for small fiber-stage offsets were not caused by the mechanical layering but possibly result from the simultaneous propagation of multiple hydraulic fractures at different rates. Furthermore, the simulation results improved the understating of the HFTS-2 LF-DAS data and the simulated strain rate patterns could also serve as templates for fracture height interpretation from LF-DAS data in future.

58 GEOSCIENCES↗
DOE OSTI2021

Mechanism of Microseismic Generation During Hydraulic Fracturing - With Evidence From HFTS 2 Observations

The objective of this study is to understand how microseismic events are generated during hydraulic fracturing, as well as the role of geomechanical conditions (i.e., stress and mechanical stratigraphy) in this process. In the industry, microseismic event clouds have been generally used as an “outer-boundary” of the “stimulated reservoir volume” (SRV). However, by comparing with other surveillance data (Low frequency Distributed Acoustic Sensing, or LF-DAS strain) in the Hydraulic Fracturing Test Site (HFTS) 2 experiment, we show that this assumption is fundamentally flawed. The HFTS 2 data has three unique observations that have not been commonly observed in other datasets: 1. Due to influence of offset pad depletion, microseismic data shows that hydraulic fractures from the child well can propagate over 3000 feet into the depleted low stress zone. 2. By comparing microseismic and horizontal fiber LF-DAS strain data, we observe that microseismic event cloud does not necessarily reflect the created hydraulic fracture volume. Particularly, the extent of microseismic event clouds near heel stages are much shorter than what is shown with LF-DAS strain data. 3. Microseismic event magnitudes are larger in the depleted regions. Through geomechanical analysis, we demonstrate that the “bedding-plane-slip” model is likely the mechanism for microseismic generation during hydraulic fracturing. Furthermore, this model successfully explains the above field observations from HFTS 2 experiment. We also provide a quantitative relationship connecting the microseismic event magnitude with fracture width increment and layer mechanical property contrast.

58 GEOSCIENCES↗
DOE OSTI2021

Validation of Fault Displacements from Dynamic Rupture Simulations against the Observations from the 1992 Landers Earthquake

ABSTRACT Coseismic fault displacements in large earthquakes have caused significant damage to structures and lifelines on and near fault lines. Coseismic displacements represent a real threat, especially to distributed infrastructure systems. For infrastructure systems that can not avoid active faults, engineering displacement demands are defined using probabilistic fault-displacement hazard analyses (PFDHA). However, PFDHA models are sparse and poorly constrained partly due to the scarcity of detailed fault-displacement observations. Advancements in dynamic rupture simulation methods make them an attractive approach to address this important issue. Because fault displacements can be simulated for various geologic conditions as constrained by current knowledge about earthquake processes, they can be used to supplement the observation datasets. In addition to providing on-fault displacements, when used with appropriate constitutive models for the bulk medium, they can capture off-fault distributed inelastic deformations as well. For viable extrapolation, simulations must first be validated against data. In this article, we summarize the calibration and validation of the dynamic rupture model against the observations of the well-documented 1992 Landers earthquake. We defined a preferred model that reproduces several first-order fault-displacement metrics such as the on-fault partition of the total displacement, the mean fault-zone width, and the location of the peak displacement. Simulated ground motions consistent with the observations ensure that all physics important to modeling have been properly parameterized. For the extrapolation, we generated a suite of dynamic rupture models to quantify expected fault-displacement metrics, their intercorrelations, and magnitude dependencies, which are in part supported by the Landers and other recent earthquakes. Our validation and extrapolation exercise paves the way for using dynamic rupture modeling to quantitatively address fault-displacement hazard on a broader scale. The results are promising and are expected to be useful to inform PFDHA model development.

Geochemistry & Geophysics↗
DOE OSTI2022

Observations and Modeling of Fiber Optic Strain on Hydraulic Fracture Height Growth in Hydraulic Fracturing Test Site 2 (HFTS-2)

Summary Understanding fracture height growth can be of great significance to optimizing field development and improving recovery. The Hydraulic Fracturing Test Site 2 (HFTS-2) has provided a unique opportunity and an advanced data set to allow us to observe and understand fracture geometries rigorously. Low-frequency distributed acoustic sensing (LF-DAS) data from a vertical well in HFTS-2 showed three key observations: (i) excessive upward height growth (>1,000 ft) and limited downward growth of the hydraulic fractures during pumping, (ii) considerable additional upward fracture height growth (~300 ft) after well shut in, and (iii) very complex LF-DAS strain rate patterns for a small fiber-to-stage offset. Advanced geomechanical modeling was performed to simulate the hydraulic fracture propagation and the resulting strain responses in the vertical direction. The modeling results demonstrated asymmetric upward and downward fracture height growths as observed in HFTS-2 with a similar upward height growth rate. Simulated waterfall plots of vertical strain rate showed distinct patterns for different fiber-to-fracture distances. The upward-growing fracture tip can be clearly identified by the interfaces between compressing and extending zones. It was also found that the complex strain rate patterns observed in HFTS-2 for small fiber-stage offsets were not caused by the mechanical layering but possibly result from the simultaneous propagation of multiple hydraulic fractures at different rates. The simulation results improved the understating of the HFTS-2 LF-DAS data, and the simulated strain rate patterns could also serve as templates for fracture height interpretation from LF-DAS data in future.

Engineering↗
DOE OSTI2023

Designing observables for quantum interference in jets at subleading color

The large-Nc or topologically planar limit of gauge theories can be considered as a classical limit because all gauge bosons are distinguishable particles and therefore cannot exhibit interference. Quantum effects due to the flow of color therefore arise starting at subleading in 1/Nc. We introduce kinematic observables explicitly sensitive to effects at subleading color formed from the ratio of interfering to squared color-ordered amplitudes. Such observables are in general not infrared and collinear safe, so we introduce angular observables defined from appropriate multi-point energy correlators motivated by the form of color-ordered amplitudes. We demonstrate that color interference effects are manifest as sinusoidal oscillation in the simplest system, a collinear jet with three particles, and show the limitations of predicting this observable in all-purpose, leading-color parton shower Monte Carlos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Validation of RU-WRF, the Custom Atmospheric Mesoscale Model of the Rutgers Center for Ocean Observing Leadership

The Rutgers University Center for Ocean Observing Leadership (RU-COOL) contracted the National Renewable Energy Laboratory (NREL) to evaluate RU-COOL's atmospheric observation and modeling capabilities for characterizing the New Jersey offshore wind resource. The observational network used by RU-COOL consists of mostly public but some private coastal and offshore buoy-based stations. The core wind resource modeling capability of RU-COOL is a custom setup of the Weather Research and Forecasting (WRF) mesoscale model, referred to in this report as RU-WRF. The most unique feature of RU-WRF and not found in other WRF model setups is the use of custom sea surface temperature (SST) product generated by RU-COOL. This custom product was designed to better capture the unique coastal upwelling and strong storm mixing in the Mid-Atlantic Bight, which other typical SST products are not designed to capture. Funding for the development, maintenance, and use of RU-WRF by RU-COOL is provided by the New Jersey Board of Public Utilities, who also funded the validation work presented in this report. In this validation study, NREL was specifically tasked to: 1) Assess the observational network used by RU-COOL to validate RU-WRF and make recommendations for improvement, 2) Assess methods used by RU-COOL to validate RU-WRF and make recommendations for improvement, 3) Examine the inputs to and setup within RU-WRF, compare against available NREL data sets, and make recommendations for improvement.

17 WIND ENERGY↗
DOE OSTI2021

Integrating AI with physics-based hydrological models and observations for insightinto changing climate and anthropogenic impacts

Focal Areas: Advanced computational methods that integrate AI, physics, and observations to provide predictive landscape hydrological modeling over large areas (regional, continental, worldwide) while incorporating increasingly available high-resolution data from drones, lidar and satellite. Science Challenge: Landscape data is available at finer scales than can be used in physics-based hydrological (PBH) models for regional or continental terrestrial water modeling. Thus, we throw away observable detail to achieve computability. We argue that integration of AI with PBH models and observed data can be used to provide upscaling for predictive models that are computable, retain physical conservation properties, and represent the fine-scale features that affect complex flow physics through both natural and urban environments. Developing such next-generation capabilities requires outside-the-box thinking that melds the different approaches of AI modeling, PBH modeling, and observation across multiple scales from local drones to satellites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Gap Flows Along the Columbia River Observed During the WFIP2 Field Campaign

Data collected in the Columbia River Gorge and Basin Area during the second Wind Forecasting Improvement Project (WFIP2) was used to study gap flow events in the region. In particular, the relationship between 200 m zonal wind speed and the zonal mesoscale pressure gradient at Troutdale (West of the gorge), Wasco (east of the gorge), and Boardman (farther east of the gorge) sites was examined. An objective criterion was used to identify 169 (Troutdale), 161 (Wasco), and 113 (Boardman) gap flow days that had weak synoptic forcing. The 200 m zonal wind speed exhibited a linear relationship with the zonal pressure gradient at Wasco during both easterly and westerly gap flow days at daily timescales. Such a relationship was only observed during easterly gap flow days at Troutdale and was not observed at Boardman. The zonal wind speed exhibited a diurnal cycle at Wasco and Boardman, with greater changes in the nighttime winds than the daytime winds due to changes in pressure gradient. The root mean square differences (RMSDs) between the observed pressure gradient at Wasco and that simulated by the High Resolution Rapid Refresh (HRRR) model in 3 km (HRRR-3km) and 750 m (HRRR-750m) horizontal resolution were 3.14 hPa and 0.57 hPa, respectively. However, the RMSDs for the 200 m zonal wind speed were 1.40 m s -1 for HRRR-3km and 1.20 m s -1 for HRRR- 750m. Improvement in simulating the zonal pressure gradient accompanied by negligible changes in simulating zonal wind speed due to higher horizontal resolution points to a complex interplay between different components of the model physics when simulating the meteorology. The HRRR-750m resolution model accurately mimicked the observed covariability (phase diagram) between the zonal pressure gradient and the 200 m zonal wind speed during the nighttime, but not during the daytime, suggesting model errors might be related to the representation of boundary layer processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

NSA Site Science: Use of ARM Observations from Northern Alaska to Evaluate and Improve Prediction Capabilities

The Arctic is warming at a rate nearly double that of the rest of the planet, leading to profound changes in atmospheric, oceanic, and ice processes. The U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility has played a significant role in Arctic research, operating observatories in Alaska's North Slope for over 25 years. These observatories provide a rich, and wide-reaching dataset that offers insight into atmospheric processes in northern Alaska. This report details the results of a nine-year research project (2015–2024) supported by the DOE Atmospheric Systems Research (ASR) program, that leverages data from ARM’s deployment of observing facilities at Utqiaġvik (known as the North Slope of Alaska, or NSA, site) and Oliktok Point, Alaska. The project was conducted in two phases: - Phase 1 (2015–2019): Focused on understanding key atmospheric processes at Oliktok Point, including cloud formation, high-latitude precipitation, aerosol-cloud interactions, and cloud properties. - Phase 2 (2019–2024): Extended the research to the broader North Slope region, using data from both Oliktok Point and Utqiaġvik. Topics explored included surface energy budgets, atmospheric stability, ice nucleation processes, and microphysics in Arctic clouds. The project resulted in numerous research products, including 50 peer-reviewed publications and dissertations, 169 presentations, and 10 data products. These products cover a variety of topics, including: - Cloud Macro- and Microphysical Properties: Arctic clouds play a crucial role in energy transfer, and accurate representation in models is critical. The study explored cloud transitions, ice crystal shapes, and dual-wavelength radar data to understand ice crystal habits and size distributions. - Aerosol Properties and Processes: The team examined aerosol sources in the Arctic, including industrial emissions and natural sources. Observations showed significant spatial gradients in aerosol concentrations due to human activities and wildfire smoke. The influence of aerosols on cloud formation and the surface energy budget was also assessed. - Aerosol-Cloud Interactions: Research revealed that aerosols might suppress cloud ice production, affecting cloud radiative forcing and precipitation. The impact of local industrial emissions on cloud properties was also investigated. - Contextualizing the North Slope of Alaska in the context of the broader Arctic: To understand broader trends, the project evaluated large-scale circulation patterns and the influence of weather systems on the Arctic. Studies indicated that large-scale processes play a significant role in temperature patterns and the timing of snowmelt. - Advancing ARM Observational and Modeling Capabilities: The project developed new radar data products and advanced measurement techniques, including clutter mitigation and drizzle detection. Uncrewed aerial systems (UAS) and tethered balloon systems (TBS) were deployed to gather detailed atmospheric data. Additionally, the project supported 10 early career scientists, providing training and mentorship to undergraduate interns, graduate students, postdoctoral researchers, and early career researchers. These efforts contributed to the advancement of ARM research capabilities and fostered a new generation of scientists skilled in Arctic atmospheric research. Ultimately, this ASR-supported project has provided valuable insights into Arctic atmospheric processes and their broader climate implications. Recommendations for future work include continuing support for long-term observing at Arctic locations to foster additional research, further exploration of aerosol-cloud interactions and the potential impacts of enhanced industrialization of the Arctic, and expanded use of uncrewed systems to gather data in this remote and harsh environment. Additionally, the data products developed by this work, and the data products developed through the ARM infrastructure, leave a treasure-trove of additional information that should be explored for many years to come to gain additional insight into physical processes in the Arctic atmosphere that drive the rapid changes occurring in at high latitudes and their global impact.

58 GEOSCIENCES↗
DOE OSTI2023

Pluminate: Quantifying aerosol injection behavior from simulation, experimentation and observations

Marine aerosol injections are a key component in further understanding of both the potentials of deliberate injection for marine cloud brightening (MCB), a potential climate intervention (CI) strategy, and key aerosol-cloud interaction behaviors that currently form the largest uncertainty in global climate model (GCM) predictions of our climate. Since the rate of spread of aerosols in a marine environment directly translates to the effectiveness and ability of aerosol injections in impacting cloud radiative forcing, it is crucial to understand the spatial and temporal extent of injected-aerosol effects following direct injection into marine environments. The ubiquity of ship-injected aerosol tracks from satellite imagery renders observational validation of new parameterizations possible in 2D, however, 3D compatible data is more scarce, and necessary for the development of subgrid scale parameterizations of aerosol-cloud interactions in GCMs. This report introduces two novel parameterizations of atmospheric aerosol injection behavior suitable for both 3D (GCM-compatible) and 2D (observation-related) modeling. Their applicability is highlighted using a wealth of different observational data: small and larger scale salt-aerosol injection experiments conducted at SNL, 3D large eddy simulations of ship-injected aerosol tracks and 2D satellite images of ship tracks. The power of experimental data in enhancing knowledge of aerosol-cloud interactions is in particular emphasized by studying key aerosol microphysical and optical properties as observed through their mixing in cloud-like environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Seismic DAS Observations of a large underground chemical explosion in dry tuff

On 18 October 2023 a 16.3-ton TNT equivalent chemical explosion was detonated underground at the Nevada National Security Site, generating a seismic event (Meyers et al., 2024). The associated seismic wavefield was measured on a Distributed Acoustic Sensing (DAS) array with slant range distances from 27 m – 1123 m. The first arriving phase traveled at an apparent velocity of about 2640 m s -1 from 27 m to 420 m slant range and about 2470 m s -1 from 505 m to 1123 m slant range according to the first arrival moveouts on the DAS data. The first arrival from the explosion temporarily saturated the cable from a slant range of 27 m – 186 m and 0.009 s to 0.084 s post detonation. From 186 m slant range to 420 m slant range, peak strain rates of 5.6 x 10 6 nm m -1 s -1 were observed for the first arrival phase. For the first arrival from 505 m slant range to 1123 m slant range, peak strain rates reduced to 8.0 x 10 4 nm m -1 s -1 . A comparison of the scaled accelerations computed from DAS, the geophone pairs, and the measurements of co-located accelerometer pairs show common agreement at the scaled ranges of the single point sensors. This study adds to the body of work reporting near-source DAS observations of the seismic wavefields generated by underground chemical explosions. These results indicate that near-source DAS observations can refine interpretations of phase identification from single-point sensor observations. Phase identification could be one mechanism that contributes scatter to single point seismic measurements which would confound the performance of empirical relationships for small explosions. Removing that mechanism may therefore reduce interstation variability and increase empirical relationship performance for small explosions.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Seismic DAS observations of a large underground chemical explosion in dry tuff

On 18 October 2023 a 16.3-ton TNT equivalent chemical explosion was detonated underground at the Nevada National Security Site, generating a seismic event with a magnitude of 1.7 (Meyers et al., 2024). The associated seismic wavefield was measured on a Distributed Acoustic Sensing (DAS) array with slant range distances from 27 m – 1123 m. The first arriving phase traveled at an apparent velocity of about 2640 m s -1 from 27 m to 420 m slant range and about 2470 m s -1 from 505 m to 1123 m slant range according to the first arrival moveouts on the DAS data. The first arrival from the explosion temporarily saturated the cable from a slant range of 27 m – 186 m and 0.009 s to 0.084 s post detonation. From 186 m slant range to 420 m slant range, peak strain rates of 5.6 x 10 6 nm m -1 s -1 were observed for the first arrival phase. For the first arrival from 505 m slant range to 1123 m slant range, peak strain rates reduced to 8.0 x 104 nm m -1 s -1 . A comparison of the scaled accelerations computed from DAS, the geophone pairs, and the measurements of co-located accelerometer pairs show common agreement at the scaled ranges of the single point sensors. This study adds to the body of work reporting near-source DAS observations of the seismic wavefields generated by underground chemical explosions. These results indicate that near-source DAS observations can refine interpretations of phase identification from single-point sensor observations. Phase identification could be one mechanism that contributes scatter to single point seismic measurements which would confound the performance of empirical relationships for small explosions. Removing that mechanism may therefore reduce interstation variability and increase empirical relationship performance for small explosions.

58 GEOSCIENCES↗
DOE OSTI2026

Final DOE-ASR Report for the Project “Using LASSO to bridge the gap between model and observations and to learn about atmospheric convection”

Atmospheric convection spans a wide range of spatial and temporal scales and involves complex interactions with the surrounding dynamic and thermodynamic environment, particularly over tropical continental regions. These processes remain a major source of uncertainty in weather and climate models, including persistent biases in the diurnal cycle of convective precipitation that directly affect estimates of climate sensitivity. Addressing these challenges requires the combined use of high-resolution observations and cloud-resolving modeling frameworks. In this context, the DOE Atmospheric Radiation Measurement (ARM) program’s Large-Eddy Simulation ARM Symbiotic Simulation and Observation (LASSO) activity provides a powerful platform that pairs comprehensive observations with numerical simulations to enable process-level understanding of atmospheric convection. Within this context, this Research and Development Partnership Pilot (RDPP) project was designed to initiate and expand DOE ARM/ASR research capacity at minority-serving institutions, while advancing scientific understanding of convective processes over the Amazon rainforest. Consistent with the RDPP mission, the project emphasized partnership development, training, and workforce capacity building alongside exploratory research activities. On the scientific side, the project produced two peer-reviewed journal articles, and one manuscript currently under review (see list in section 3.1). Together, these studies combine long-term ARM observations and cloud-resolving and convection-permitting modeling to investigate the environmental controls on the shallow-to-deep convective transition during the Amazon wet season. The results demonstrate the central role of early-day moisture preconditioning and large-scale dynamical forcing in regulating isolated deep convection, provide mechanistic insight into convective evolution, and establish physically informed modeling frameworks for future sensitivity experiments. These scientific outcomes are described in sections 2.1 to 2.3 and were disseminated in 8 conference presentations (see section 3.2) and 5 invited talks (see section 3.3), reflecting broad engagement with our community. Equally important, the project achieved its RDPP capacity-building objectives (see section 2.4). A sustained research partnership was established among the University of Maryland, Baltimore County (UMBC), Morgan State University (MSU), and Howard University (HU), and extended to include collaboration with Pacific Northwest National Laboratory (PNNL). The project organized multiple multi-day training events focused on ARM data, LASSO simulations, and quantitative analysis methods, directly engaging students, postdoctoral researchers, and faculty across institutions. These activities broadened participation in ASR research and led to independent adoption of LASSO workflows by students beyond the immediate project team. Finally, the project successfully positioned the participating institutions to pursue future DOE research. Preliminary scientific results, coupled with strengthened partnerships and technical capacity, enabled the submission of follow-on proposals to DOE ASR funding opportunities. In this way, the project fulfilled the RDPP goal of seeding durable research capacity and laying the foundation for larger-scale, sustained engagement with DOE ARM and ASR programs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Observability of fidelity decay at the Lyapunov rate in few-qubit quantum simulations

In certain regimes, the fidelity of quantum states will decay at a rate set by the classical Lyapunov exponent. This serves both as one of the most important examples of the quantum-classical correspondence principle and as an accurate test for the presence of chaos. While detecting this phenomenon is one of the first useful calculations that noisy quantum computers without error correction can perform, a thorough study of the quantum sawtooth map reveals that observing the Lyapunov regime is just beyond the reach of present-day devices. We prove that there are three bounds on the ability of any device to observe the Lyapunov regime and give the first quantitatively accurate description of these bounds: (1) the Fermi golden rule decay rate must be larger than the Lyapunov rate, (2) the quantum dynamics must be diffusive rather than localized, and (3) the initial decay rate must be slow enough for Lyapunov decay to be observable. This last bound, which has not been recognized previously, places a limit on the maximum amount of noise that can be tolerated. The theory implies that an absolute minimum of 6 qubits is required. Recent experiments on IBM-Q and IonQ imply that some combination of a noise reduction by up to 100x per gate and large increases in connectivity and gate parallelization are also necessary. Finally, scaling arguments are given that quantify the ability of future devices to observe the Lyapunov regime based on trade-offs between hardware architecture and performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Observable-projected ensembles

Measurements in many-body quantum systems can generate non-trivial phenomena, such as preparation of long-range entangled states, dynamical phase transitions, or measurement-altered criticality. Here, we introduce a new measurement scheme that produces an ensemble of mixed states in a subsystem, obtained by measuring a local Hermitian observable on part of its complement. We refer to this as the observable-projected ensemble . Unlike standard projected ensembles-where pure states are generated by projective measurements on the complement-our approach involves projective partial measurements of specific observables. This setup has two main advantages: theoretically, it is amenable to analytical computations, especially within conformal field theories. Experimentally, it requires only a linear number of measurements, rather than an exponential one, to probe the properties of the ensemble. As a first step in exploring the observable-projected ensemble, we investigate its entanglement properties in conformal field theory and perform a detailed analysis of the free compact boson.

Milekhin, Alexey [California Institute of Technolo↗