Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical schemes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Computation of turbulent supersonic flows around pointed bodies having crossflow separation

The numerical method developed by Schiff and Sturek (1980) on the basis of the thin-layer parabolized Navier-Stokes equations of Schiff and Steger (1980) is extended to the case of turbulent supersonic flows on pointed bodies at high angles of attack. The governing equations, the numerical scheme, and modifications to the algebraic eddy-viscosity turbulence model are described; and results for three cones and one ogive-cylinder body (obtained using grids of 50 nonuniformly spaced points in the radial direction between the body and the outer boundary) are presented graphically and compared with published experimental data. The grids employed are found to provide sufficient spatial resolution of the leeward-side vortices; when combined with the modified turbulence model, they are shown to permit accurate treatment of flows with large regions of crossflow separation.

Degani, D.↗
NASA NTRS1986

Using Hough harmonics to validate and assess nonlinear shallow-water models

The implementation of a technique for locating programming errors in shallow-water codes, establishing the correctness of the code, and assessing the performance of the numerical model under various flow conditions is described. The right-hand side of the differential equations is modified in such a way that the exact solution of the nonlinear initial-value problem is known, so that the truncation errors of the numerical scheme can be studied in detail. The exact solution is prescribed to be any linear combination of Hough harmonics which propagate in time according to their natural frequencies.

Dee, Dick P.↗
NASA NTRS1987

Transonic aeroelasticity of wings with active control surfaces

Transonic aeroelasticity of wings with active control surfaces is studied by using the unsteady-small disturbance transonic aerodynamic equations coupled with modal structural equations of motion. The aerodynamic and structural equations of motion are simultaneously integrated by a time-accurate numerical scheme. A procedure of synthesizing active controls with unsteady transonics is presented. Flutter suppression in the transonic regime using active controls is demonstrated for a rectangular wing. Characteristics of a selected control law in the transonic regime are studied. The results from this study are useful in the design of active control systems in the transonic regime.

Guruswamy, Guru P.↗
NASA NTRS1987

Numerical simulation of transonic propeller flow using a three-dimensional small disturbance code employing novel helical coordinates

The numerical simulation of three-dimensional transonic flow about propeller blades is discussed. The equations for the unsteady potential flow about propellers is given for an arbitrary coordinate system. From this the small disturbance form of the equation is derived for a new helical coordinate system. The new coordinate system is suited to propeller flow and allows cascade boundary conditions to be applied straightforward. A numerical scheme is employed which solves the steady flow as an asymptotic limit of unsteady flow. Solutions are presented for subsonic and transonic flow about a 5 percent thick bicircular arc blade of an eight bladed cascade. Both high and low advance ratio cases are given which include a lifting case as well as nonlifting cases. The nonlifting cases are compared to solutions from a Euler code.

Snyder, Aaron↗
NASA NTRS1987

Application of the CSCM method to the design of wedge cavities

This paper describes the application of the conservative supra characteristic method (CSCM) to predict the flow around two-dimensional slot injection cooled cavities in hypersonic flow. Seven different numerical solutions are presented that model three different experimental designs. The calculations manifest outer flow conditions including the effects of nozzle/lip geometry, angle of attack, nozzle inlet conditions, boundary and shear layer growth and turbulance on the surrounding flow. The calculations were performed for analysis prior to wind tunnel testing for sensitivity studies early in the design process. Qualitative and quantitative understanding of the flows for each of the cavity designs and design recommendations are provided. The present paper demonstrates the ability of numerical schemes, such as the CSCM method, to play a significant role in the design process.

Venkatapathy, Ethiraj↗
NASA NTRS1987

A new model of cometary ionospheres

The coupled continuity, momentum, and energy equations were solved for ionospheric conditions appropriate for Comet Halley at 1 AU. The numerical scheme used is such that any shock transition appears naturally in the solution and no a priori assumptions are necessary. Solutions were obtained for a number of different assumptions concerning electron heating rates, but all showed that the electron temperatures increase rapidly and significantly at a distance from the nucleus where collisional electron-neutral cooling becomes unimportant. This temperature increase is accompanied by a sharp increase in both the plasma pressure and its associated polarization electric field, causing the supersonic plasma flow to go subsonic. It is not clear at this time whether or not this sonic transition is accompanied by a shock.

Korosmezey, A.↗
NASA NTRS1985

Aerothermal modeling program, phase 2

The main objectives of the Aerothermal Modeling Program, Phase 2 are: to develop an improved numerical scheme for incorporation in a 3-D combustor flow model; to conduct a benchmark quality experiment to study the interaction of a primary jet with a confined swirling crossflow and to assess current and advanced turbulence and scalar transport models; and to conduct experimental evaluation of the air swirler interaction with fuel injectors, assessments of current two-phase models, and verification the improved spray evaporation/dispersion models.

Mongia, H. C.↗
NASA NTRS1988

Euler solution of multiblade rotor flow

A numerical method for solving the Euler equations for multiblade rotors has been developed and some preliminary results reported. The numerical scheme is a combination of several recent methods and algorithm improvements, adapted to the particular requirements of rotor-body interactions. A cylindrical basic grid has been used to study conventional multiblade helicopter rotors. Test calculations have been made for two- and six-blade rotors in hover and for a two-blade rotor in forward flight, under transonic tip conditions but without lift. The results show good agreement with experimental data.

Chen, C. L.↗
NASA NTRS1988

Numerical Simulation of Subsonic and Transonic Propeller Flow

The numerical simulation of 3-D transonic flow about a system of propeller blades is investigated. In particular, it is shown that the use of helical coordinates significantly simplifies the form of the governing equation when the propeller system is assumed to be surrounded by an irrotational flow field of an inviscid fluid. The unsteady small disturbance equation, valid for lightly loaded blades and expressed in helical coordinates, is derived from the general blade-fixed potential equation, given for an arbitrary coordinate system. The use of a coordinate system which inherently adapts to the mean flow results in a disturbance equation requiring relatively few terms to accurately model the physics of the flow. Furthermore, the helical coordinate system presented here is novel in that it is periodic in the circumferential direction while, simultaneously, maintaining orthogonal properties at the mean blade locations. The periodic characteristic allows a complete cascade of blades to be treated, and the orthogonality property affords straightforward treatment of blade boundary conditions. An ADI numerical scheme is used to compute the solution of the steady flow as an asymptotic limit of an unsteady flow. As an example of the method, solutions are presented for subsonic and transonic flow about a 5 percent thick bicircular arc blade of an 8-bladed cascade. Both high and low advance ratio cases are computed and include a lifting as well as nonlifting cases. The nonlifting solutions obtained are compared to solutions from a Euler code.

Snyder, Aaron↗
NASA NTRS1988

Application of advanced grid generation techniques for flow field computations about complex configurations

In the computation of flowfields about complex configurations, it is very difficult to construct a boundary-fitted coordinate system. An alternative approach is to use several grids at once, each of which is generated independently. This procedure is called the multiple grids or zonal grids approach; its applications are investigated. The method conservative providing conservation of fluxes at grid interfaces. The Euler equations are solved numerically on such grids for various configurations. The numerical scheme used is the finite-volume technique with a three-stage Runge-Kutta time integration. The code is vectorized and programmed to run on the CDC VPS-32 computer. Steady state solutions of the Euler equations are presented and discussed. The solutions include: low speed flow over a sphere, high speed flow over a slender body, supersonic flow through a duct, and supersonic internal/external flow interaction for an aircraft configuration at various angles of attack. The results demonstrate that the multiple grids approach along with the conservative interfacing is capable of computing the flows about the complex configurations where the use of a single grid system is not possible.

Kathong, Monchai↗
NASA NTRS1988

Improved 3-D turbomachinery CFD algorithm

The building blocks of a computer algorithm developed for the time-accurate flow analysis of rotating machines are described. The flow model is a finite volume method utilizing a high resolution approximate Riemann solver for interface flux definitions. This block LU implicit numerical scheme possesses apparent unconditional stability. Multi-block composite gridding is used to orderly partition the field into a specified arrangement. Block interfaces, including dynamic interfaces, are treated such as to mimic interior block communication. Special attention is given to the reduction of in-core memory requirements by placing the burden on secondary storage media. Broad applicability is implied, although the results presented are restricted to that of an even blade count configuration. Several other configurations are presently under investigation, the results of which will appear in subsequent publications.

Janus, J. Mark↗
NASA NTRS1988

Adaptive computational methods for aerothermal heating analysis

The development of adaptive gridding techniques for finite-element analysis of fluid dynamics equations is described. The developmental work was done with the Euler equations with concentration on shock and inviscid flow field capturing. Ultimately this methodology is to be applied to a viscous analysis for the purpose of predicting accurate aerothermal loads on complex shapes subjected to high speed flow environments. The development of local error estimate strategies as a basis for refinement strategies is discussed, as well as the refinement strategies themselves. The application of the strategies to triangular elements and a finite-element flux-corrected-transport numerical scheme are presented. The implementation of these strategies in the GIM/PAGE code for 2-D and 3-D applications is documented and demonstrated.

Price, John M.↗
NASA NTRS1986

The computation of flow past an oblique wing using the thin-layer Navier-Stokes equations

Essential aspects are presented for computing flow past an oblique wing with the thin-layer Navier-Stokes equations. A new method is developed for generating a grid system around a realistic wing. This method utilizes a series of conformal transformations. The thin-shear-layer approximation and an algebraic eddy-viscosity turbulence model are used to simplify the Reynolds-averaged Navier-Stokes equations. An implicit, factored numerical scheme and the concept of pencil data structure are utilized. For the first time, some flow fields caused by the oblique wing in a supersonic free stream are discussed, emphasizing the separated vortex flows associated with such a wing.

Mehta, Unmeel↗
NASA NTRS1987

Radiatively driven winds from magnetic, fast-rotating stars - Wolf-Rayet stars?

An analytical procedure is developed to solve the MHD equations for a stellar wind in the strong-magnetic-field, optically thick limit for hot stars. The slow-mode, Alfven, and fast-mode critical points are modified by the radiation terms in the force equation but in a manner that can be easily treated. Once the velocities and distances are known at the critical points, the streamline constants are determined in a straight-forward manner. This shows the structure of the wind with a relatively simple numerical scheme. The magnetic field and a radiation parameter specify the terminal wind velocity. High rotation rates and a modified slow-mode critical point close to the stellar surface determine the high mass-loss rates. Wolf-Rayet stars are modeled with 1000-G fields but require stellar rotational velocities approaching breakup values. The physical conditions that correspond to Wolf-Rayet models are so rare that another mechanism must be operating in these winds.

Nerney, Steven↗
NASA NTRS1987

Legendre-tau approximation for functional differential equations. II - The linear quadratic optimal control problem

The numerical scheme based on the Legendre-tau approximation is proposed to approximate the feedback solution to the linear quadratic optimal control problem for hereditary differential systems. The convergence property is established using Trotter ideas. The method yields very good approximations at low orders and provides an approximation technique for computing closed-loop eigenvalues of the feedback system. A comparison with existing methods (based on averaging and spline approximations) is made.

Ito, Kazufumi↗
NASA NTRS1988

A conservative approach for flow field calculations on multiple grids

In the computation of flow fields about complex configurations, it is very difficult to construct body-fitted coordinate systems. An alternative approach is to use several grids at once, each of which is generated independently. This procedure is called the 'multiple grids' or 'zonal grids' approach and its applications are investigated in this study. The method follows the conservative approach and provides conservation of fluxes at grid interfaces. The Euler equations are solved numerically on such grids for various configurations. The numerical scheme used is the finite-volume technique with a three-stage Runge-Kutta time integration. The code is vectorized and programmed to run on the CDC VPS-32 computer. Some steady state solutions of the Euler equations are presented and discussed.

Kathong, M.↗
NASA NTRS1988

Magnetic fields interacting with nonlinear compressible convection

Two-dimensional numerical simulations are used to study fully compressible convection in the presence of an imposed magnetic field. Highly nonlinear flows are considered that span multiple density scale heights. The convection tends to sweep the initially uniform vertical magnetic field into concentrated flux sheets with significant magnetic pressures. These flux sheets are partially evacuated, and effects of buoyancy and Lorentz forces there can serve to suppress motions. The flux sheets can be surrounded by a sheath of descending flow. If the imposed magnetic field is sufficiently strong, the convection can become oscillatory. The unstably stratified fluid layer has an initial density ratio (bottom to top of layer) of 11. Surveys of solutions at fixed Rayleigh number sample Chandrasekhar numbers from 1 to 1000 and magnetic Prandtl numbers from 1/16 to 1. These nonlinear simulations utilize a two-dimensional numerical scheme based on a modified two-step Lax-Wendroff method.

Hulburt, Neal E.↗
NASA NTRS1988

The effects of finite rate chemical processes on high enthalpy nozzle performance - A comparison between SPARK and SEAGULL

The generalized chemistry version of the computer code SPARK is extended to include two higher-order numerical schemes, yielding fourth-order spatial accuracy for the inviscid terms. The new and old formulations are used to study the influences of finite rate chemical processes on nozzle performance. A determination is made of the computationally optimum reaction scheme for use in high-enthalpy nozzles. Finite rate calculations are compared with the frozen and equilibrium limits to assess the validity of each formulation. In addition, the finite rate SPARK results are compared with the constant ratio of specific heats (gamma) SEAGULL code, to determine its accuracy in variable gamma flow situations. Finally, the higher-order SPARK code is used to calculate nozzle flows having species stratification. Flame quenching occurs at low nozzle pressures, while for high pressures, significant burning continues in the nozzle.

Carpenter, M. H.↗