Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Perturbative theoretical model of electronic transient circular dichroism spectroscopy of molecular aggregates

A chiral analog of transient absorption spectroscopy, transient circular dichroism (TCD) spectroscopy is an emerging time-resolved method. Both spectroscopic methods can probe the electronic transitions of a sample, and TCD is additionally sensitive to the dynamic aspects of chirality, such as those induced by molecular excitons. Here, we develop a theoretical description of TCD for electronic multi-level models in which the pump pulse is linearly polarized and probe pulse is alternately left- and right-circularly polarized. We derive effective response functions analogous to those often used to describe other four-wave mixing methods and then simulate and analyze TCD spectra for three representative multi-level electronic model systems. We elaborate on the presence and detection of the spectral signatures of electronic coherences.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1985

Molecular orbital studies in oxidation: Sulfate formation and metal-metal oxide adhesion

The chemical mechanisms for sulfate formation from sodium chloride and sulfur trioxide, which is a product of jet fuel combustion was determined. Molten sodium sulfate leads to hot corrosion of the protective oxide layers on turbine blades. How yttrium dopants in nidkel-aluminum alloys used in turbine blades reduce the spalling rate of protective alumina films and enhance their adhesion was also determined. Two other fulfate mechanisms were deduced and structure of carbon monoxide on a clean chronium and clean platinum-titanium alloys surfaces was determined. All studies were by use of the atom superposition and electron delocalization molecular orbital (ASED-MO) theory. Seven studies were completed. Their titles and abstracts are given.

Anderson, A. B.↗
DOE OSTI2024

Deprotonated sulfamic acid and its homodimers: Does sulfamic acid adopt zwitterion during cluster growth?

Here we present a joint experimental and computational study on the geometric and electronic structures of deprotonated sulfamic acid (SA) clusters [(SA) n –H] – (n = 1, 2) employing negative ion photoelectron spectroscopy and high-level ab initio calculations. The photoelectron spectra provide the vertical/adiabatic detachment energy (VDE/ADE) of the sulfamate anion (SM – ) H 2 N•SO 3 – at 4.85 ± 0.05 and 4.58 ± 0.08 eV, respectively, and the VDE and ADE of the SM – •SA dimer at 6.41 ± 0.05 and 5.87 ± 0.08 eV, respectively. The significantly increased electron binding energies of the dimer confirm the enhanced electronic stability upon the addition of one SA molecule. The CCSD(T)-predicted VDEs/ADEs agree excellently with the experimental data, confirming the identified structures as the most stable ones. Two types of dimer isomers possessing different hydrogen bonding (HB) motifs are identified, corresponding to SM – binding to a zwitterionic SA (SM – •SA z ) and a canonical SA (SM – •SA c ), respectively. Two N–H$\cdots$O HBs and one superior O–H$\cdots$O HB are formed in the lowest-lying SM – •SA c , while SM – •SA z has three moderate N–H$\cdots$O HBs, with the former being 4.71 kcal/mol more stable. Further theoretical analyses reveal that the binding strength advantage of SM – •SA c over SM – •SA z arises from its significant contributions of orbital interactions between fragments, illustrating that sulfamate strongly interacts with its parent SA acid and preferably chooses the canonical SA in the subsequent cluster formations. Given the prominent presence of SA, this study provides the first evidence that the canonical dimer model of sulfamic acid should exist as a superior configuration during cluster growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1999

Computational Study of Field Initiated Surface Reactions for Synthesis of Diamond and Silicon

This project involves using quantum chemistry to simulate surface chemical reactions in the presence of an electric field for nanofabrication of diamond and silicon. A field delivered by a scanning tunneling microscope (STM) to a nanometer scale region of a surface affects chemical reaction potential energy surfaces (PES) to direct atomic scale surface modification to fabricate sub-nanometer structures. Our original hypothesis is that the applied voltage polarizes the charge distribution of the valence electrons and that these distorted molecular orbitals can be manipulated with the STM so as to change the relative stabilities of the electronic configurations over the reaction coordinates and thus the topology of the PES and reaction kinetics. Our objective is to investigate the effect of applied bias on surface reactions and the extent to which STM delivered fields can be used to direct surface chemical reactions on an atomic scale on diamond and silicon. To analyze the fundamentals of field induced chemistry and to investigate the application of this technique for the fabrication of nanostructures, we have employed methods capable of accurately describing molecular electronic structure. The methods we employ are density functional theory (DFT) quantum chemical (QC) methods. To determine the effect of applied bias on surface reactions we have calculated the QC PESs in various applied external fields for various reaction steps for depositing or etching diamond and silicon. We have chosen reactions which are thought to play a role in etching and the chemical vapor deposition growth of Si and diamond. The PESs of the elementary reaction steps involved are then calculated under the applied fields, which we vary in magnitude and configuration. We pay special attention to the change in the reaction barriers, and transition state locations, and search for low energy reaction channels which were inaccessible without the applied bias.

Musgrave, Charles Bruce↗
DOE OSTI2020

The striking influence of oxophilicity differences in heterometallic Mo–Mn oxide cluster reactions with water

Mixed-metal oxides have proven to be effective catalysts for the hydrogen evolution reaction, often outperforming either of the binary metal oxides. The reactivity of Mn x MoO y - (x = 1, 2; y = 3, 4) clusters toward H 2 O was investigated via time-of-flight mass spectrometry with clear evidence of cluster oxidation and corresponding H 2 production, specifically for Mn x MoO 3 - (x = 1, 2) clusters. Unlike previously studied MoxOy- clusters, which assumed a broad distribution of stoichiometries (typically x ≤ y ≤ 3x), both MnMoOy- and Mn 2 MoO y - preferentially formed y = 3 and 4 compositions in significant quantities under our source conditions. The electronic and molecular structures of the Mn x MoO y (x = 1, 2; y = 3, 4) anion and neutral clusters were probed with anion photoelectron spectroscopy and analyzed with supporting density functional theory calculations. Our studies suggest that both metal centers are involved in initial cluster–water complex formation, while Mo is the center that undergoes oxidation; hence, reactivity terminates when Mo is saturated in its highest oxidation state of +6. Across these four clusters, Mn remains relatively reduced and is stable in a high-spin electronic configuration. The preferential reactivity of water molecules toward the Mo center rather than Mn is rationalized by the much lower relative oxophilicity of Mn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Growth of PdCoO 2 films with controlled termination by molecular-beam epitaxy and determination of their electronic structure by angle-resolved photoemission spectroscopy

Utilizing the powerful combination of molecular-beam epitaxy (MBE) and angle-resolved photoemission spectroscopy (ARPES), we produce and study the effect of different terminating layers on the electronic structure of the metallic delafossite PdCoO 2 . Attempts to introduce unpaired electrons and synthesize new antiferromagnetic metals akin to the isostructural compound PdCrO 2 have been made by replacing cobalt with iron in PdCoO 2 films grown by MBE. Using ARPES, we observe similar bulk bands in these PdCoO 2 films with Pd-, CoO 2 -, and FeO 2 -termination. Nevertheless, Pd- and CoO 2 -terminated films show a reduced intensity of surface states. Additionally, we are able to epitaxially stabilize PdFe x Co 1– x O 2 films that show an anomaly in the derivative of the electrical resistance with respect to temperature at 20 K, but do not display pronounced magnetic order.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Controlled molecule injector for cold, dense, and pure molecular beams at the European x-ray free-electron laser

A permanently available molecular-beam injection setup for controlled molecules (COMO) was installed and commissioned at the small quantum systems (SQS) instrument at the European x-ray free-electron laser (EuXFEL). A b-type electrostatic deflector allows for pure state-, size-, and isomer-selected samples of polar molecules and clusters. The source provides a rotationally cold (T ≈ 1 K) and dense (ρ ≈ 10 8 cm −3 ) molecular beam with pulse durations up to 100 µs generated by a new version of the Even-Lavie valve. Here, a performance overview of the COMO setup is presented along with characterization experiments performed both with an optical laser at the Center for Free-Electron-Laser Science and with x rays at EuXFEL under burst-mode operation. COMO was designed to be attached to different instruments at the EuXFEL, in particular, the SQS and single particles, clusters, and biomolecules (SPB) instruments. This advanced controlled-molecules injection setup enables x-ray free-electron laser studies using highly defined samples with soft and hard x-ray FEL radiation for applications ranging from atomic, molecular, and cluster physics to elementary processes in chemistry and biology.

He, Lanhai↗
DOE OSTI2023

Near-continuum, hypersonic oxygen flow over a double cone simulated by direct simulation Monte Carlo informed from quantum chemistry

A large-scale, fully resolved direct simulation Monte Carlo (DSMC) computation of a non-equilibrium, reactive flow of pure oxygen over a double cone is presented. Under the simulated near-continuum conditions, the computational demands are shown to be significant because of the wide range of length scales that must be resolved. Therefore, robust grid adaption capabilities and efficient parallelization of the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code that is utilized in this work are essential. The thermochemical and transport collision models were selected for efficiency and simplicity. First-principles data, obtained from the highly accurate direct molecular simulation method, were used to inform the collision models’ parameters. Importantly, because SPARTA implements molecular collision models using collision-specific energies, the resulting macroscopic relaxation rates were evaluated a posteriori via zero-dimensional heat bath simulations. The comparisons of surface properties, namely heat flux and pressure, show very close agreement with previous computational fluid dynamics (CFD) results. Differences with the measurements were found to be similar to the CFD simulations. The unresolved discrepancy with the measurements could be due to inconsistent free stream conditions with the actual experimental data or missing physical phenomena altogether, for example atomic and molecular oxygen electronically excited states, three-dimensional effects, or more complex gas–surface interactions. As shown in this work, the advantages of obtaining a DSMC particle solution for these flows reside in the method's ability to be directly informed from first principles and to seamlessly describe internal energy non-equilibrium for all modes. With the advent of exascale computing and beyond, particle methods will be an increasingly important tool to verify the validity of physical assumptions in reduced-order models via fully resolved, experimental-scale simulations, down to the level of molecular-level distributions.

Mechanics↗
DOE OSTI2021

Modulating the Electron Affinity of Small Bipyridyl Molecules on Single Gold Nanoparticles for Plasmon-Driven Electron Transfer

Developing controlled platforms for plasmon-driven chemistry is of great importance in catalytic reactions at the nanoscale. We report anion radical formation for five bipyridyl complexes of varying degrees of electron affinity utilizing optically fo-cused intraband (594 nm) and interband (532 nm) pump excitation of single gold nanoparticles. The surface-enhanced Raman scattering (SERS) of anion radicals for the five non-resonant adsorbed molecules 2,2’-bipyridine (22BPY), 4,4’-bipyridine (44BPY), trans-1,2-bis(4-pyridyl)ethylene (BPE), 1,2-bis(4-pyridyl)acetylene (BPA), and 1,2-bis(4-pyridyl)ethane (BPEt) were detected using localized surface-plasmon resonance (LSPR) excitation with 785 nm. The electron affinity of the five bipyridyl complexes were determined using electrochemistry. Molecules with low electron affinity experienced high-er instances of radical anion formation under a plasmon-coupled intraband electron transfer excitation (594 nm) whereas molecules with high electron affinity showed a preference for anion radical formation under direct interband electron trans-fer excitation (532 nm). The lowest unoccupied molecular orbital (LUMO) energy levels for low electron affinity surface-bound molecules (22BPY, BPEt) are on average ~0.43 eV higher for high electron affinity surface-bound molecules (BPA, BPE, 44BPY) as calculated using time-dependent density functional theory, elucidating the importance of plasmon coupling to energy levels that facilitate charge transfer pathways. We also show the ability to ‘activate’ high vs low electron affinity single nanoparticles with the choice of pump excitation wavelength. The findings show the complex interplay between molecular electron affinity, orbital overlap with the density of states of the plasmonic metal, and excitation energetics of the pump laser wavelength. Potential applications of this work include enhanced control over molecular scale catalysis, biosensor design, and solar energy capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Molecular beam epitaxial growth and transmission electron microscopy studies of thin GaAs/InAs(100) multiple quantum well structures

GaAs/InAs(100) multiple interface structures involving 7.4 percent lattice mismatch have been fabricated via molecular beam epitaxy and examined via transmission electron microscopy. It is found that high-quality, dislocation-free interfaces involving such high lattice mismatch can indeed be experimentally realized for very thin layers provided proper care is given to achieve a balance between the growth kinetics and the thermodynamics leading to the equilibrium ground state of the strained layer. The compressive strain is homogeneously accommodated and a tetragonal distortion is induced in the InAs layer with a perpendicular lattice constant in close agreement with that expected on the basis of the continuum theory and elastic constants of bulk InAs.

Grunthaner, F. J.↗
DOE OSTI2021

Investigating phase transitions from local crystallographic analysis based on statistical learning of atomic environments in 2D MoS 2 -ReS 2

Traditionally, phase transitions are explored using a combination of macroscopic functional characterization and scattering techniques, providing insight into the average properties and symmetries of the lattice but local atomic level mechanisms during phase transitions generally remain unknown. Here, we explore the mechanisms of a phase transition between the trigonal prismatic and distorted octahedral phases of layered chalcogenides in the 2D MoS 2 - ReS 2 system from the observations of local degrees of freedom, namely atomic positions by Scanning Transmission Electron Microscopy (STEM). We employ local crystallographic analysis based on statistical learning of atomic environments to build a picture of the transition from the atomic level up and determine local and global variables controlling the local symmetry breaking. In particular, we argue that the dependence of the average symmetry breaking distortion amplitude on global and local concentration can be used to separate local chemical as well as global electronic effects on transition. This approach allows exploring atomic mechanisms beyond the traditional macroscopic descriptions, utilizing the imaging of compositional fluctuations in solids to explore phase transitions over a range of realized and observed local stoichiometries and atomic configurations.

25 ENERGY STORAGE↗
DOE OSTI2020

Molecule Origins of Dipolar Character in Excited Electronic States

The molecular level origins for symmetry breaking in the excited state of symmetrical quadrupolar molecules, particularly in polar solvents, was investigated using time-dependent density functional theory approaches. Molecules of the form ADA (A/D electron accepting/donating respectively), have been shown to break their symmetry upon excitation, producing an intramolecular charge transfer event and permanent dipole. Current research indicates that polar solvents stabilize the charge transfer event thereby producing asymmetrical solvent dynamics on opposite ends of the molecules. In this work key structural features of the molecule were identified including (1) incorporation of cyano groups, (2) rotation of grafted phenyl rings, and (3) the length of the conjugated R group chain. More specifically, incorporation of cyano groups appears to decrease the magnitude of the dipole in the excited state, thereby indicating that solvent interactions at these groups do not stabilize the charge transfer. While the rotation of the phenyl groups appears to be necessary to break the symmetry of the excited state in the molecule.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Molecular Dynamics Simulation and Cryo-Electron Microscopy Investigation of AOT Surfactant Structure at the Hydrated Mica Surface

Structural properties of the anionic surfactant dioctyl sodium sulfosuccinate (AOT or Aerosol-OT) adsorbed on the mica surface were investigated by molecular dynamics simulation, including the effect of surface loading in the presence of monovalent and divalent cations. The simulations confirmed recent neutron reflectivity experiments that revealed the binding of anionic surfactant to the negatively charged surface via adsorbed cations. At low loading, cylindrical micelles formed on the surface, with sulfate head groups bound to the surface by water molecules or adsorbed cations. Cation bridging was observed in the presence of weakly hydrating monovalent cations, while sulfate groups interacted with strongly hydrating divalent cations through water bridges. The adsorbed micelle structure was confirmed experimentally with cryogenic electronic microscopy, which revealed micelles approximately 2 nm in diameter at the basal surface. At higher AOT loading, the simulations reveal adsorbed bilayers with similar surface binding mechanisms. Adsorbed micelles were slightly thicker (2.2–3.0 nm) than the corresponding bilayers (2.0–2.4 nm). Upon heating the low loading systems from 300 K to 350 K, the adsorbed micelles transformed to a more planar configuration resembling bilayers. The driving force for this transition is an increase in the number of sulfate head groups interacting directly with adsorbed cations.

58 GEOSCIENCES↗
DOE OSTI2025

Soft and Stretchable Thienopyrroledione–Based Polymers via Direct Arylation

π-conjugated polymers (CPs) that are concurrently soft and stretchable are needed for deformable electronics. Molecular-level modification of indacenodithiophene (IDT) copolymers, a class of CPs that exhibit high hole mobilities (μ hole ), is an approach that can help realize intrinsically soft and stretchable CPs. Numerous examples of design strategies to adjust the stretchability of CPs exist, but imparting softness is comparatively less studied. In this study, a systematic molecular weight (MW) series is constructed on a promising candidate for soft CPs, poly(indacenodithiophene-co-thienopyrroledione) (p(IDT C16- TPD C8 )), by optimizing direct arylation polymerization conditions in hopes of improving stretchability and μhole without significantly impacting softness. We found p(IDT C16- TPD C8 ) at a degree of polymerization of 32 shows high stretchability (crack onset strain, CoS > 100%) without significantly impacting softness (elastic modulus, E = 32 MPa), which to the best of our knowledge outperforms previously reported stretchable and soft CPs. To further study how molecular-level modifications impact polymer properties, a MW series of a new extended donor unit polymer, poly(indacenodithienothiophene-co-thienopyrroledione) (p(IDTT C16- TPD C8 )), was synthesized. The IDTT C16 copolymers did not result in a greater average μ hole when comparing between p(IDTT C16- TPD C8 ) and p(IDT C16- TPD C8 ) despite their higher crystallinity observed by GIWAXS. While these findings warrant further investigation, this study points toward unique charge transport properties of IDT-based polymers.

direct arylation polymerization↗
DOE OSTI2023

Regiospecific Incorporation of Acetylene Linker in High‐Electron Mobility Dimerized Acceptors for Organic Solar Cells with High Efficiency (18.8%) and Long 1‐Sun Lifetime (> 5000 h)

Abstract The commercialization of organic solar cells (OSCs) requires both high power conversion efficiency (PCE) and long‐term stability. However, the lifetime of the OSCs containing small‐molecule acceptors (SMA) should be significantly enhanced. In this study, a series of planarity‐controlled is developed, high electron mobility dimerized SMAs (DSMAs) and realize OSCs with high‐performance (PCE = 18.8%) and high‐stability ( t 80% lifetime = 5380 h under 1‐Sun illumination). An acetylene linker with a planar triple bond is designed for dimerization of SMA units to afford the high backbone planarity necessary to achieve high crystallinity and electron mobility. To further engineer the molecular conformation and electron mobility of the DSMAs, different regioisomers of a Y‐based SMA are dimerized to yield three regioisomerically distinct DSMAs, denoted as DYA‐I, DYA‐IO, and DYA‐O, respectively. It is found that the crystallinity, electron mobility, and glass transition temperature of the DSMAs gradually increase in the order of DYA‐O, DYA‐IO, and DYA‐I, which, in turn, enhance the PCE and device stability of the resulting OSCs; DYA‐O (PCE = 16.45% and t 80% lifetime = 3337 h) < DYA‐IO (PCE = 17.54% and t 80% lifetime = 4255 h) < DYA‐I (PCE = 18.83% and t 80% lifetime = 5380 h).

Chemistry↗
DOE OSTI2020

Calcium–Based Metal–Organic Frameworks and Their Potential Applications

Metal–organic frameworks (MOFs) built on calcium metal (Ca-MOFs) represent a unique subclass of MOFs featuring high stability, low toxicity, and relatively low density. Ca-MOFs show considerable potential for molecular separations, electronic, magnetic, and biomedical applications, although they are not investigated as extensively as transition metal-based MOFs. Compared to MOFs made of other groups of metals, Ca-MOFs may be particularly advantageous for certain applications such as adsorption and storage of light molecules because of their gravimetric benefit, and drug delivery due to their high biocompatibility. This review intends to provide an overview on the recent development of Ca-MOFs, including their synthesis, crystal structures, important properties, and related applications. Here, various synthetic methods and techniques, types of building blocks, structure and porosity features, selected physical properties, and potential uses will be discussed and summarized. Representative examples will be illustrated for each type of important applications with a focus on their structure–property relations.

36 MATERIALS SCIENCE↗