Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modified separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Subscale maturation of advanced reactor technologies (SMART): A path forward for nuclear thermal propulsion fuel and reactor development

Nuclear Thermal Propulsion (NTP) systems are actively being developed for future crewed missions to Mars. NTP systems excel in missions where both high thrust and high specific impulse are required, but modern NTP systems currently do not have a Technology Readiness Level (TRL) high enough for use in crewed space exploration. TRLs are used to demonstrate the level of rigor with which a component/system has been tested/demonstrated for its intended use. While space systems technology in general must be qualified as a unit, nuclear technology must be first demonstrated to meet qualification level requirements both at the fuel (component) level and the reactor (subsystem) level. Here, in this paper, historic NTP development programs are surveyed to identify a testing and development strategy that can be effectively implemented to allow for NTP reactor development. Based on this strategy, required facilities to enable such activities are identified. Current domestic experimental capabilities to support NTP qualification are limited to separate effects testing of individual components. Separate effects testing is found extensively in historic NTP development efforts but is not sufficient for full fuel and reactor qualification. Combined effects testing allows for an accurate assessment of fuel performance but is not achievable for NTP conditions in existing facilities. Assessment of historic development programs suggests that an intermediate, subscale test facility is necessary to advance NTP TRLs. A solution to meet this need is proposed, namely the Subscale Maturation of Advanced Reactor Technologies (SMART) facility. SMART will mitigate risk to NTP development by enabling performance and reactor physics demonstrations of NTP subsystems. A SMART facility could be built by modifying existing nuclear test facilities, which may potentially enable schedule and cost savings. To pursue reactor qualification beyond the subscale, a new ground test facility will be necessary. This ground test facility should be developed concurrently with SMART to allow for the facility to be operational in time for expedited NTP engine demonstration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

A model to separate conduction and radiation in high temperature laser flash measurements for semi-transparent materials

Laser flash analysis (LFA) is a widely used technique in the scientific and industrial communities for measuring the thermal diffusivity and conductivity of materials. However, traditional fitting methods based solely on heat conduction do not account for radiation heat transfer in transparent and semi-transparent materials, which becomes significant at high temperatures. In this study, we have developed a coupled radiation-conduction model that considers the optical properties of materials to accurately extract thermal diffusivity from LFA measurements. We conducted LFA measurements on fused silica glass samples of varying thicknesses and within the temperature range of 25 to 1000 °C and fitted the data with the model. Since the coupled model requires optical properties as input parameters, which are often unavailable for new materials, we have also proposed a modified transparent model. Compared to the coupled model, results from the modified transparent model generally overestimate thermal conductivity, but the errors are acceptable in silica glass with small thickness. Here, we also investigated the applicability of the modified transparent model with materials of different optical properties.

14 SOLAR ENERGY↗
DOE OSTI2025

Syncopated dynamical decoupling to suppress crosstalk in quantum circuits

Theoretically understanding and experimentally characterizing and modifying the underlying Hamiltonian of a quantum system is of utmost importance in achieving high-fidelity quantum gates for quantum computing. Here, in this work, we explore the use of dynamical decoupling (DD) in characterizing and suppressing undesired two-qubit couplings as well as the underlying single-qubit decoherence, both significant hurdles to achieving precise quantum control and realizing quantum computing on many hardware prototypes. Through discrete search of DD sequences, we identify sequences that protect against decoherence and selectively target unwanted two-qubit interactions of general form. On a transmon-qubit-based superconducting quantum device, we identify separate white and 1/𝑓 noise components underlying the single-qubit decoherence and a static ZZ coupling between pairs of qubits. A family of syncopated DD sequences is found and their efficiency is demonstrated in two-qubit benchmarking experiments. The syncopated decoupling technique significantly boosts performance in a realistic algorithmic quantum circuit.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Microstructure and Hard Magnetic Properties of Sm 1-x Zr x (Fe,Co) 11.3-y Ti 0.7 By Ingots and Thick Melt-Spun Ribbons

Permanent magnets made from Sm(Fe,Co) 12 -based compounds are being actively pursued through nanostructuring and powder metallurgy. This study was aimed at the development of hard magnetic properties in bulk as-cast alloys and in melt-spun alloys for very low wheel speeds. Slower solidification rates and alloying with Zr promote the tetragonal ThMn 12 -type crystal structure, whereas higher solidification rates and alloying with B replace the ThMn 12 structure type with the TbCu 7 structure type. When introduced simultaneously, Zr and B dramatically reduce the alloy solidification rates required for both the refinement of the 1:12 crystallites and their replacement with the 1:7 phase. In bulk arc-melted alloys, this allowed for a microstructure of separated 1:12 crystallites 1–3 μm in size, although, because of the ferromagnetic nature of a minority phase, the coercivity of these fine-grained alloys reached only 0.73 kOe. A moderately accelerated solidification further refined the 1:12 crystallites and increased the coercivity; a Sm 0.7 Zr 0.4 (Fe,Co) 10.8 Ti 0.7 B 0.5 alloy exhibited a coercivity of 1.5 kOe and a maximum energy product of 3.4 MGOe when it was melt-spun into a 0.26-mm-thick ribbon. A more rapid solidification suppressed the 1:12 phase and after annealing at 800–850 °C, the alloys modified with Zr and B developed reasonably high coercivity and maximum energy product even when melt-spun at a wheel speed of 6 m/s. For the above-mentioned alloy, these values were 4.1 kOe and 7.8 MGOe, respectively. Further, a similarly processed very-Sm-lean Sm 0.5 Zr 0.6 (Fe,Co) 10.6 Ti 0.7 B 0.7 alloy exhibited a remanence of 8.8 kG and an energy product of 7.4 MGOe.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Solar cell contacts: quantifying the impact of interfacial layers on selectivity, recombination, charge transfer, and V oc

Interfacial layers (IFLs) are ubiquitous in solar cells, but their precise impact on carrier transfer rates and the relation of these rates to performance metrics and the concepts of selectivity and recombination is lacking. We report the use of a well-defined interdigitated back-contact (IBC) silicon solar cell to determine the precise role of such IFLs. We characterize the action of the common IFL spiro-OMeTAD by making it a third contact to the IBC cell. This architecture creates three solar cells within a single structure that, with numerical simulation, provide the exchange current densities (i.e., charge transfer rates) for electrons ( J 0n ) and holes ( J 0p ) and the quasi Fermi-level splitting in the absorber, which measures the balance of generation and recombination. Further, we describe the relation of V oc to contact recombination, the asymmetry in electron/hole collection rates at a single contact (contact selectivity), and the asymmetry in collection rates of the same carrier at separate contacts (carrier selectivity). Relative to bare gold, neat spiro-OMeTAD reduces J 0n and J 0p (their geometric mean ( J 0n J 0p ) 0.5 decreases by 10 4 ), decreasing contact recombination. Addition of the common dopant Li-TFSI and air increase J 0p / J 0n by 10 6 with little effect on ( J 0n J 0p ) 0.5 , increasing contact hole selectivity. The significant increase in V oc observed by introducing spiro-OMeTAD/Li-TFSI IFLs into the cells studied, however, is due to an increase in the carrier selectivity rather than the contact selectivity or recombination of the spiro-OMeTAD-modified contact. Operando measurements further show voltage-dependent changes in the J 0 s, demonstrating that spiro-OMeTAD contributes to hysteresis. Broader context : Solar cells operate by photogenerating excess charge carriers in an absorber material and, in competition with recombination, asymmetrically extracting them at so-called carrier-selective contacts, one that ideally collects only electrons and the other, only holes. Particularly in emerging photovoltaics such as perovskites, thin layers of organic semiconductors or related materials are introduced between the absorber and contact to improve power conversion efficiency. In terms of interfacial charge transfer, a prevailing view is that such interfacial layers improve performance by helping block the collection of the undesired carrier, considered a form of recombination. We use a novel platform to study the simultaneous impact of spiro-OMeTAD, a common interfacial layer, on the collection of electrons, the collection of holes, and on the recombination of electrons and holes. We quantitatively demonstrate that spiro-OMeTAD layers indeed passivate the contact toward recombination, but that larger improvements in the open-circuit voltage, a key cell metric, can come not only from this but also from increasing the asymmetry of the collection of electrons in the system. Further, operando measurements show transient changes in the properties of spiro-OMeTAD which suggest that it contributes to hysteresis phenomena commonly observed in perovskite and other solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Constraining the hadronic spectrum and repulsive interactions in a hadron resonance gas via fluctuations of conserved charges

We simultaneously incorporate two common extensions of the hadron resonance gas model, namely the addition of extra, unconfirmed resonances to the particle list and the excluded volume repulsive interactions. We emphasize the complementary nature of these two extensions and identify combinations of conserved charge susceptibilities that allow to constrain them separately. In particular, ratios of second-order susceptibilities like $\chi_{11}^{BQ}/\chi_2^B$ and $\chi_{11}^{BS}/\chi_2^B$ are sensitive only to the baryon spectrum, while fourth-to-second order ratios like $\chi_4^B/\chi_2^B$, $\chi_{31}^{BS}/\chi_{11}^{BS}$, or $\chi_{31}^{BQ}/\chi_{11}^{BQ}$ are mainly determined by repulsive interactions. Analysis of the available lattice results suggests the presence of both the extra states in the baryon-strangeness sector and the repulsive baryonic interaction, with indications that hyperons have a smaller repulsive core than non-strange baryons. Furthermore, the modified hadron resonance gas model presented here significantly improves the description of lattice QCD susceptibilities at chemical freeze-out and can be used for the analysis of event-by-event fluctuations in heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Effects of transition metals on the evolution of polymer-derived SiOC ceramics

This work focuses on catalytic graphitization from different metals, iron (Fe), cobalt (Co), and nickel (Ni), for inducing carbon growth in silicon oxycarbides (SiOCs) during the pyrolysis. Fe, Co, and Ni-modified SiOCs were synthesized by pyrolysis to 900, 1100, and 1300 °C respectively in Ar. The transition metals induced the formation of the corresponding metal silicides, β-SiC, and graphitic carbon with the catalytic activity in the order of Fe > Co > Ni, in agreement with the activation energy calculation based on the carbon types and amounts. Lateral growth of turbostratic carbon followed a 2D grain growth process and its point-like defect density decreased based on the catalytic order of the transition metals, with SiOC/Fe having the lowest defect density. Quantitative analysis of the XPS results with Rietveld refinement illustrated that the phase separation of SiOC is more dominant than local carbothermal reduction between SiO 2 and C in the SiOC/M (M = Ni, Co, or Fe) systems. Understanding the catalytic graphitization effect of Ni, Co, and Fe on polymer derived ceramics offers new strategies in increasing high-temperature phase amounts and thus creating novel materials for heterogeneous catalysis, magnetic, and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Organic Matter Concentration and Composition in November 2021 and April 2022 from 12 Streams Impacted by the 2020 Holiday Farm Fire (v2)

This dataset represents results from a field study aiming to understand storm induced transport of pyrogenic materials to streams impacted by varying degrees of burn severity. Time series samples were collected at 5 sites within the McKenzie River Watershed (Oregon, USA) whose catchment were each completely engulfed by the 2020 Holiday Farm Fire. An additional 7 sites were sampled once during the storm. The samples were collected during storm events in November 2020, January 2021, November 2021, and April 2022. Samples were characterized for benezenepolycarboxylic acids (BPCA), ultra-high resolution mass spectrometry, dissolved organic carbon and optics (absorbance and fluorescence). Fourier-transform ion cyclotron resonance mass spectrometry (FTICR) and dissolved organic carbon data from the November 2020 (referred to as “EWEB_2020”) sampling can be found in a separate data package (doi: 10.15485/1869708). NOTE: The 2020 samples were run on FTICR-MS in two unique instances. The first run can be found in the previous data package (EWEB_2020). The second run is included in this data package. These samples were run for a second time so that the data were more directly interoperable with the other samples in this data package. We have not done any investigation into the differences/similarities between these datasets and the previously ran/published data in the other data package. This data package was originally published in November 2024. It was updated in April 2025 (v2; new and modified files). See the change history section below for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. This dataset contains (1) file-level metadata; (2) data dictionary; (3) data package readme; (4) metadata; (5) methods information; (6) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data; (7) excitation emission matrix (EEM) methods; and (8) a sub-folder with processed EEM data (9) benzene polycarboxylic acid (BPCA) concentration data; (10) Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) methods; and (11) folder of high-resolution characterization of organic matter via 12 Tesla FTICR-MS generated through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory). The EEMs sub-folder contains two additional folders; the Absorbance and Fluorescence folders which contain the processed EEMs absorbance and fluorescence data respectively. This package contains the following file types: csv, xml, pdf.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Elucidating Photoinduced Processes of Photosystem I Via Multidimensional Electronic and Vibrational Spectroscopies

This project was motivated by an overarching goal to elucidate the mechanism of energy and electron transfer that governs the efficient charge separation in photosystem I (PSI) complexes. PSI is a natural light harvesting complex that drives oxygenic photosynthesis in plants, algae, and cyanobacteria. It uses ~300 tightly packed chlorophylls (Chls) to absorb photons, transfer the excitation energy to the reaction center (RC), and generate a charge separated state with near unity quantum efficiency (QE). A better understanding of the mechanism of energy transfer and charge separation in PSI is required for understanding the high QE of natural light harvesting complexes, and it could lead to the further development of artificial photosynthetic systems for solar energy conversion and modification of light harvesting complexes to improve crop yields. We applied two-dimensional optical spectroscopies to different cyanobacterial photosystem I complexes, including PSI complexes that contain Chl f molecules, to map energy transfer pathways and gain insight into the efficient light harvesting of PSI. We used two-dimensional electronic spectroscopies (2DES) to map energy transfer in Chl a and Chl f containing PSI complexes. To investigate the Chl f PSI complexes, we modified our spectrometer to probe the lower energy states associated with Chl f molecules. We interpreted the 2DES spectra through global analysis procedures to generate maps of energy transfer. We also constructed a two-dimensional electronic vibrational (2DEV) spectrometer that will be used to investigate charge transfer transitions and dynamics within PSI complexes. Measurements were performed on model systems to establish general data analysis procedures for interpreting 2D spectra and gain insight into protein cofactor interactions.

14 SOLAR ENERGY↗
DOE OSTI2026

Hydration size-dependent transport of ions across nanoporous graphene membranes

Nanoporous atomically-thin membranes are promising candidates for metal ion separations due to their chemical stability and high permeance and selectivity, but experimental evidence of the mechanisms responsible for ion-ion selectivity is sparse. Here, in this work, we measured the simultaneous diffusion of a dilute mixture of ten different Group I, Group II, and rare earth cations in a salt background across nanoporous graphene (NPG) membranes with sub-nanometer pores. The membranes exhibited ion-ion selectivity, including between similarly-charged ions. Cation transport was governed primarily by the hydrated ion size that was consistent with continuum models of ion diffusion, with additional influence of the ionic charge. Selectivity enhancement was achieved by modifying ion sizes using an ion-selective complexing agent. Our study provides evidence of the importance of size-sieving and electrostatic mechanisms governing ion transport across NPG, and allows for quantitative prediction of transport rates to guide future development of ion-selective atomically-thin membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Formation of a simple cubic antiferromagnet through charge ordering in a double Dirac material

Following the topological classification of electronic phases, interest has grown in materials with unique electronic or magnetic properties driven by topology and interactions. Here, in this study, we report that the topologically nontrivial mixed valent intermetalllic EuPd 3 S 4 undergoes long-range charge ordering at 𝑇 𝐶⁢𝑂 = 340 K wherein 𝐽 = 7/2 Eu 2+ and Van Vleck 𝐽 = 0 Eu 3+ ions on a body-centered-cubic lattice separate into two interpenetrating simple cubic sublattices. The reduced symmetry transmutes 8-fold double Dirac states into 4-fold Dirac states and leads to a simple cubic Heisenberg antiferromagnet with G-type antiferromagnetic order for 𝑇 <⁢ 𝑇 𝑁 = 2.85⁢(6) K. While time reversal symmetry is broken, its combination with nearest neighbor lattice translation can form a nonsymmorphic symmetry preserving the 4-fold Dirac point. The application of a magnetic field yields a spin flop transition at the lowest temperatures but, as a consequence of the extreme isotropy of Eu, that phase transition turns into a cross-over at higher temperatures. Our work demonstrates how charge order modifies topology in EuPd 3 S 4 and exposes an archetypal simple cubic Heisenberg antiferromagnet.

Berry, Tanya [Johns Hopkins Univ., Baltimore, MD (↗
DOE OSTI2022

Reinforcement Learning for Volt- Var Control: A Novel Two-stage Progressive Training Strategy

This paper develops a reinforcement learning (RL) approach to solve a cooperative, multi-agent Volt-Var Control (VVC) problem for high solar penetration distribution systems. The ingenuity of our RL method lies in a novel two-stage progressive training strategy that can effectively improve training speed and convergence of the machine learning algorithm. In Stage 1 (individual training), while holding all the other agents inactive, we separately train each agent to obtain its own optimal VVC actions in the action space: fconsume, generate, do-nothingg. In Stage 2 (cooperative training), all agents are trained again coordinatively to share VVC responsibility. Rewards and costs in our RL scheme include (i) a system-level reward (for taking an action), (ii) an agent-level reward (for doing-nothing), and (iii) an agent-level action cost function. This new framework allows rewards to be dynamically allocated to each agent based on their contribution while accounting for the trade-off between control effectiveness and action cost. The proposed methodology is tested and validated in a modified IEEE 123-bus system using realistic PV and load profiles. Simulation results confirm that the proposed approach is robust and computationally efficient; and it achieves desirable volt-var control performance under a wide range of operation conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Diffusioosmotic flow reversals due to ion–ion electrostatic correlations

Existing theories of diffusioosmosis have neglected ion–ion electrostatic correlations, which are important in concentrated electrolytes. Here, we develop a mathematical model to numerically compute the diffusioosmotic mobilities of binary symmetric electrolytes across low to high concentrations in a charged parallel-plate channel. We use the modified Poisson equation to model the ion–ion electrostatic correlations and the Bikerman model to account for the finite size of ions. We report two key findings. First, ion–ion electrostatic correlations can cause a unique reversal in the direction of diffusioosmosis. Such a reversal is not captured by existing theories, occurs at ≈ 0.4 M for a monovalent electrolyte, and at a much lower concentration of ≈ 0.003 M for a divalent electrolyte in a channel with the same surface charge. This highlights that diffusioosmosis of a concentrated electrolyte can be qualitatively different from that of a dilute electrolyte, not just in its magnitude but also its direction. Second, we predict a separate diffusioosmotic flow reversal, which is not due to electrostatic correlations but the competition between the underlying chemiosmosis and electroosmosis. This reversal can be achieved by varying the magnitude of the channel surface charge without changing its sign. However, electrostatic correlations can radically change how this flow reversal depends on the channel surface charge and ion diffusivity between a concentrated and a dilute electrolyte. Furthermore, the mathematical model developed here can be used to design diffusioosmosis of dilute and concentrated electrolytes, which is central to applications such as species mixing and separation, enhanced oil recovery, and reverse electrodialysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular dopants: Tools to control the electronic structure of metal halide perovskite interfaces

In the standard configurations of metal halide perovskite solar cell, the active layer, or absorber, follows a p-i-n or n-i-p electronic structure that is designed to enhance the separation and extraction of photo-induced charge carriers. The control of the Fermi level position across the film, between electron and hole transport layers, is therefore of paramount importance. Direct localized doping in metal halide perovskites being still elusive, the design of n-i-p and p-i-n structures has so far relied predominantly on surface and interface doping of the perovskite as well as on the control of the work function of the substrate and transport layers on which, or between which, the absorber is being placed. We provide here a short review of that work, emphasizing the fundamental studies of electronic structure performed on systems modified with organic molecular dopants. The review starts with a justification for the effectiveness of interface doping, based on the ability to move the Fermi level across the gap of the perovskite. We then review work done on the deposition of molecular oxidants and reductants on perovskite surfaces, including the mitigation of the surface states, and the impact of these dopants on energy level alignment with substrate and charge transport layers. The second part of the review focuses on the use of molecular dopants to either modify the work function of electron or hole transport layers to establish the boundary conditions for a p-i-n or n-i-p structure, or to enhance the conductivity of these layers in order to facilitate charge carrier extraction. Final considerations are also given on recent work on bulk doping of the perovskite layer with molecular dopants.

14 SOLAR ENERGY↗
DOE OSTI2026

Automation of Nanoparticle Synthesis Processes in a Plasma Environment Using LabVIEW

This work presents an automated control system for the synthesis of nanomaterials by plasma-enhanced chemical vapor deposition (PECVD), implemented using the LabVIEW software environment. The main objective of the study is to develop an integrated hardware-software platform that enables sequential control of the key stages of the PECVD process, including vacuum chamber preparation, pressure monitoring, working gas supply, plasma ignition, power matching, cyclic nanomaterial growth, and optical monitoring of nanoparticles in the plasma environment. The use of LabVIEW made it possible to integrate actuator control, experimental parameter acquisition, and realtime process visualization within a single automated system. The automated cycle begins with evacuation of the reaction chamber to a predefined base pressure. Transition to the next stage is permitted only after the specified pressure threshold has been reached, ensuring reproducible initial conditions for each experiment. The program then controls the supply of the working gas through mass flow controllers (MFCs). In this work, two gas-flow control modes were considered: analog control using a 0-5 V voltage signal and digital communication via RS-232 interface. It was shown that the analog approach requires accurate scaling of the control voltage, since applying 5 V corresponds to full-scale opening of the controller and results in the maximum gas flow. In contrast, the RS232 interface enables the gas flow rate to be specified directly in sccm, improving the accuracy, flexibility, and convenience of gas-environment control. After pressure stabilization, LabVIEW initiates RF plasma ignition and executes the RF matching algorithm aimed at minimizing reflected power and improving the stability of the plasma process. A separate software module implements the cyclic nanomaterial growth mode, in which the plasma-on time, plasma duration, and total number of synthesis cycles are predefined. This approach makes it possible to control material accumulation on the substrate and to correlate the process parameters with the morphological characteristics of the resulting nanostructures. The final module of the system is designed for optical monitoring of the nanoparticle cloud density in dusty plasma. For this purpose, the change in the intensity of laser radiation passing through the plasma region is recorded using a photodetector and a Keithley 2401 measuring unit connected to LabVIEW via RS-232 interface. The difference between the initial and modified optical signal intensity is used as a diagnostic parameter characterizing the formation and temporal evolution of nanoparticles. The developed system demonstrates that LabVIEW can be effectively applied not only for the automation of individual instruments, but also for the implementation of a complete digital control cycle for PECVD-based nanomaterial synthesis.

PECVD↗
DOE OSTI2020

River Plume Liftoff Dynamics and Surface Expressions

The water surface expression of liftoff and its dependence on discharge are examined using numerical simulations with the Regional Ocean Modeling System (ROMS). Liftoff is the process by which buoyant river water separates from the bed and flows over denser saltwater. During low-discharge conditions liftoff occurs in the river and is accompanied by a change in the surface slope. During high-discharge conditions liftoff occurs outside the mouth and generates a ridge on the water surface. The location and height of the ridge can be described by analytical equations in terms of discharge, shelf slope, and river mouth aspect ratio. The offshore distance and height of the ridge are proportional to the river discharge and vary inversely with river mouth aspect ratio. For steep shelf slopes liftoff occurs close to the river mouth and generates a large ridge. The ridge is modified, but not eliminated, by the presence of tides. The water surface slope change at the ridge peak is large enough to be detected by the upcoming Surface Water and Ocean Topography (SWOT) altimeter and can be used to identify the liftoff location during high discharge. However, during low discharge the water surface slope change at the liftoff location is too small to be detected by SWOT. These results indicate that remote measurements of the presence or absence of the ridge may be useful to distinguish between low and high flows, and remote measurements of the ridge location or height could be used to estimate freshwater discharge.

42 ENGINEERING↗
DOE OSTI2020

Sulfonamide and Sulfonamido-phenol Ligands for Extraction of f-Elements from Alkaline High-Level Waste

Alkaline High Level Waste (HLW) has been accumulated at Hanford and Savannah River Sites as a result of reprocessing for nuclear weapons production during the cold war. A large volume (∼100 MGal) has been accumulated in carbon steel tanks at Savannah River (SRS) and Hanford. The tank waste contains three separate phases generated when NaOH was added to previously acidic Purex raffinates: 1-2 Supernatant liquid, salt-cake, and sludge. The sludge consists mainly of insoluble hydroxides of transition metals while the supernate and salt-cake contain caustic-soluble materials, including salts of highly radioactive fission products Cs(I) and Sr(II). Current treatment of alkaline HLW in SRS includes: i) The Actinide Removal Process (ARP), which is based on sorption of {sup 90}Sr and Actinides (An) on monosodium titanate (MST), also known as 'alpha-strike' process, followed by ii) Caustic Side Solvent Extraction (CSSX),4 which is used for the extraction of {sup 137}Cs by modified calixarenes in a hydrocarbon diluent. Residual actinides in some tanks are removed after CSSX by an additional ARP process commonly referred to as 'alpha-finishing'. Despite the success of ARP for Sr and An removal, as it is a sorption process, it represents the kinetic bottleneck of integrated salt waste processing. Hence potential introduction of additional organic ligands for actinide extraction (in a modified CSSX process) could simplify the overall integrated process, making it more efficient and economical, with less titanate needed and shorter sorption time, as some of the actinide component would be removed during CSSX. In this study tri-sulfonamide and o-sulfonamido-phenol (mono-sulfonamide) ligands have been studied as extractants for Sm(III), which is being used as an Am(III) surrogate. Our prior studies in the group using a tri-sulfonamide (iPr-tsa-B) showed favorable extraction for Sm(III) nitrate salts from alkaline solutions. Mono-sulfonamides possess similar orientation of binding sites to pyrocatechols, which have been found to be good ligands for Am(III) binding and extraction from alkaline media. Tri-sulfonamide of the type iPr-tsa-B6 (1 mM in CH{sub 2}Cl{sub 2} solution) was studied for Ln{sup 3+} extraction using Sm(NO{sub 3}){sub 3}.6H{sub 2}0 (10 and 25 μM) in alkaline solution of NaOH (0.05, 0.1, 0.2, 0.3 mM) / 0.1 M NaNO{sub 3}. Stripping of the organic phase was done using 0.1 M HNO{sub 3} and quantification of Sm{sup 3+} was done using ICP-OES at 359.3 nm. The need to improve stability of the complex led to synthesis of compounds with N-donor site closer to the central benzene ring to facilitate cation-π interactions. Synthesis of tri-sulfonamide type A: a) Chloromethyl methyl ether, SnCl{sub 4}, CH{sub 2}Cl{sub 2}, 0 deg. C, N{sub 2}, 4 h, 57%; b) NaN{sub 3}, reflux in H{sub 2}O/acetone for 22 h, 80%; c) PPh{sub 3}, THF/H{sub 2}O, 22 h, 79%; d) p-toluene sulfonyl chloride, Et{sub 3}N, 1,2-DCE, 22 h. Extraction: Sm(NO{sub 3}){sub 3}.6H{sub 2}O (2 mM) in 5 ml of aqueous NaOH (pH 10.5 - 14) + 6 ml of CH{sub 2}Cl{sub 2} solution of msa (20 mole equiv.) were rotated on a wheel (60 rpm; 20 h). Stripping: 5 ml of 0.1 M HNO{sub 3} + CH{sub 2}Cl{sub 2} solution of msa (after extraction, centrifugation and filtration) was rotated on the wheel (60 rpm; 20 h). Sm{sup 3+} was quantified using UV-Visible spectrophotometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Engineered Pseudomonas putida simultaneously catabolizes five major components of corn stover lignocellulose: Glucose, xylose, arabinose, p-coumaric acid, and acetic acid

Valorization of all major lignocellulose components, including lignin, cellulose, and hemicellulose is critical for an economically viable bioeconomy. In most biochemical conversion approaches, the standard process separately upgrades sugar hydrolysates and lignin. Here, we present a new process concept based on an engineered microbe that could enable simultaneous upgrading of all lignocellulose streams, which has the ultimate potential to reduce capital cost and enable new metabolic engineering strategies. Specifically, we engineered Pseudomonas putida, a robust microorganism capable of catabolizing aromatic compounds, organic acids, and D-glucose, to utilize D-xylose and L-arabinose by tuning D-xylose transport and pentose phosphate pathway flux. Distinct L-arabinose pathways enabled D-glucose, D-xylose, and L-arabinose co-utilization in minimal medium using model compounds as well as corn stover hydrolysate. After modifying catabolite repression, our engineered P. putida simultaneously co-utilized five representative compounds from cellulose, hemicellulose, and lignin, demonstrating the feasibility of simultaneously upgrading total lignocellulosic biomass to value-added chemicals.

Elmore, Joshua R.↗