Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Boron Nitride Nanotubes Synthesized by Pressurized Reactive Milling Process

Nanotubes, because of their very high strength, are attractive as reinforcement materials for ceramic matrix composites (CMCs). Recently there has been considerable interest in developing and applying carbon nanotubes for both electronic and structural applications. Although carbon nanotubes can be used to reinforce composites, they oxidize at high temperatures and, therefore, may not be suitable for ceramic composites. Boron nitride, because it has a higher oxidation resistance than carbon, could be a potential reinforcement material for ceramic composites. Although boron nitride nanotubes (BNnT) are known to be structurally similar to carbon nanotubes, they have not undergone the same extensive scrutiny that carbon nanotubes have experienced in recent years. This has been due to the difficulty in synthesizing this material rather than lack of interest in the material. We expect that BNnTs will maintain the high strength of carbon nanotubes while offering superior performance for the high-temperature and/or corrosive applications of interest to NASA. At the NASA Glenn Research of preparing BN-nTs were investigated and compared. These include the arc jet process, the reactive milling process, and chemical vapor deposition. The most successful was a pressurized reactive milling process that synthesizes BN-nTs of reasonable quantities.

Hurst, Janet B.↗
NASA NTRS2006

Ion Milling On Steps for Fabrication of Nanowires

Arrays of nanowires having controlled dimensions can now be fabricated on substrates, optionally as integral parts of multilayer structures, by means of a cost-effective, high-yield process based on ion milling on steps. Nanowires made, variously, of semiconductors or metals are needed as components of sensors and high-density electronic circuits. Unlike prior processes used to fabricate nanowires, the present process does not involve electron-beam lithography, manipulation of nanoscopic objects by use of an atomic-force microscope, or any other technique that is inherently unsuitable for scaling up to mass production. In comparison with the prior processes, this process is rapid and simple. Wires having widths as small as a few tens of nanometers and lengths as long as millimeters have been fabricated by use of this process. The figure depicts a workpiece at different stages of the process. A silicon dioxide substrate is coated with a photoresist or poly(methyl methacrylate) [PMMA] to a thickness of as much as 500 nm. The photoresist or PMMA is patterned to form edges where wires are to be formed. A metal - either Pt or Ti - is deposited, by sputtering, to a thickness of as much as 200 nm. By ion milling at normal incidence, the thickness of the metal deposit is reduced until the only metal that remains is in the form of wall-like nanowires along the edges of the photoresist or PMMA. Finally, an oxygen plasma is used to remove the photoresist or PMMA, leaving only the nanowires on the substrate.

Yun, Minhee↗
NASA NTRS2013

Coordinated in Situ Analyses of Organic Nanoglobules in the Sutter's Mill Meteorite

The Sutter's Mill meteorite is a newly fallen carbonaceous chondrite that was collected and curated quickly after its fall. Preliminary petrographic and isotopic investigations suggest affinities to the CM2 carbonaceous chondrites. The primitive nature of this meteorite and its rapid recovery provide an opportunity to investigate primordial solar system organic matter in a unique new sample. Here we report in-situ analyses of organic nanoglobules in the Sutter's Mill meteorite using UV fluorescence imaging, Fourier-transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), NanoSIMS, and ultrafast two-step laser mass spectrometry (ultra-L2MS).

Nakamura-Messenger, K.↗
NASA NTRS2012

Radar-Enabled Recovery of the Sutters Mill Meteorite, a Carbonaceous Chondrite Regolith Breccia

Doppler weather radar imaging enabled the rapid recovery of the Sutter's Mill meteorite after a rare 4-kiloton of TNT-equivalent asteroid impact over the foothills of the Sierra Nevada in northern California. The recovered meteorites survived a record high-speed entry of 28.6 kilometers per second from an orbit close to that of Jupiter-family comets (Tisserand's parameter = 2.8 +/- 0.3). Sutter's Mill is a regolith breccia composed of CM (Mighei)-type carbonaceous chondrite and highly reduced xenolithic materials. It exhibits considerable diversity of mineralogy, petrography, and isotope and organic chemistry, resulting from a complex formation history of the parent body surface. That diversity is quickly masked by alteration once in the terrestrial environment but will need to be considered when samples returned by missions to C-class asteroids are interpreted.

Radar↗
NASA NTRS1942

A Flush-Rivet Milling Tool

The investigation of machine-countersunk flush rivets for aircraft described in reference 1 revealed the necessity of having the height of the rivet heads greater than the depth of the countersunk holes if tightly riveted joints were to be obtained. If ordinary roundhead rivets were inserted from the opposite side of the joint and the countersunk heads formed in the driving of the rivets filled the countersunk holes completely, still tighter joints were obtained. In either case the rivets protruded above the skin surface after driving, and the protruding portion of the rivet heads had to be removed in order to obtain flush rivets. A number of requests have been received for a description of the tool used to mill off the protruding portion of the rivet heads. This report contains assembly and detail drawings of the latest flush-rivet milling tool used at the NACA Structures Research Laboratory. Figure 6 shows the tool in operation. This tool is quite satisfactory for 1/8-inch rivets, but a more powerful motor is recommended for use with larger rivets.

Gottlieb, Robert↗
NASA NTRS2018

Enigmatic Nodule-Bearing Rocks in the Mafic to Ultramafic Diana Mills Pluton, Piedmont Province, Virginia

The Silurian Diana Mills pluton is a metamorphosed mafic-ultramafic body in the Piedmont Province of Virginia. Major rock types in the pluton include metadiorite and chlorite‐amphibole rock, with lesser amounts of hornblendite. However, the most visually striking rocks, found at 4 locations, consist of tan‐weathering nodules in a dark green matrix. The purpose of this study was to investigate the origin of these nodular rocks. All rocks show evidence of greenschistfacies metamorphism, but relict igneous textures are preserved locally. Apart from the nodules, Ca‐amphibole is ubiquitous in all rock types. Nodules are dominated by serpentine or talc (+magnetite +/- chromite), and many show a thin (less than or equal to 5 mm) radially oriented shell of serpentine against adjacent matrix. The nodules are ultramafic (Mg# approx. 80-90, up to7,563 ppm Cr, up to 2,038 ppm Ni), and their normative mineralogy is dominated by olivine and orthopyroxene. Thus, they represent metamorphosed harzburgites and pyroxenites. Matrix minerals are dominantly amphibole + chlorite, along with variable amounts of talc + magnetite. Some matrix samples are chlorite‐rich, probably reflecting metasomatic reaction with nodules (i.e., they are small‐scale ''blackwalls''). Matrix samples are also ultramafic (high Mg#, Cr, and Ni). The matrix of the nodule‐bearing outcrops is essentially the same as other chlorite‐amphibole rocks elsewhere in the pluton. We consider these rocks to represent emplacement of an original hornblende peridotite crystal mush (a mixture of crystals and hydrous melt), which locally carried harzburgitic nodules. The nodules most likely represent the earliest‐formed cumulates from the Diana Mills parent magma.

Owens, Brent E.↗
DOE OSTI2014

Fermentation and chemical treatment of pulp and paper mill sludge

A method of chemically treating partially de-ashed pulp and/or paper mill sludge to obtain products of value comprising taking a sample of primary sludge from a Kraft paper mill process, partially de-ashing the primary sludge by physical means, and further treating the primary sludge to obtain the products of value, including further treating the resulting sludge and using the resulting sludge as a substrate to produce cellulase in an efficient manner using the resulting sludge as the only carbon source and mixtures of inorganic salts as the primary nitrogen source, and including further treating the resulting sludge and using the resulting sludge to produce ethanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Biomass torrefaction mill

A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

09 BIOMASS FUELS↗
DOE OSTI2018

An Analytic Framework for Optimal Milling Parameter Selection

The selection of optimal parameters is an important step in machining process definition. This paper presents a decision analytic framework for completing this task. The approach is demonstrated for titanium milling. An influence diagram showing the decision situation, the corresponding uncertainties, and the value is presented. The optimization objective is the selection of machining parameters that minimize cost while considering uncertainty in tool life and stability. The uncertainties are characterized using a probability distribution taking into account all available information. The cost associated with tool failure and unstable cutting conditions is incorporated in the cost formulation. A process probability tree showing the uncertainties and the corresponding costs is constructed. The optimization results show a 90% reduction in machining cost as compared to tool manufacturer-recommended parameters. The proposed framework is normative and robust and can be applied for optimizing process parameters in conventional (such as milling and turning) and non-conventional (such as electric discharge machining, electro-chemical machining) processes. A discussion section regarding inference, experimental design, and risk aversion is included.

Karandikar, Jaydeep↗
DOE OSTI2023

Impact of Anatomical Fractionation of Corn Stover on Hammer Mill Throughput and Energy Consumption

The goal of this Case Study was to quantify the impacts of variable moisture and ash on hammer mill throughput and energy consumption and on loss of very wet stover that causes failures in the first stage grinder and that are not able to be fed to conversion, as compared to a status quo Base Case system. Also considered was convertible carbohydrate content (minimum total carbohydrate specification), maximum ash content and the delivered feedstock cost impacts of not being able to feed stover that did not meet the total carbohydrate specification to the conversion reactor. Laboratory data on the impacts of moisture content and tissue fraction on throughput and energy consumption in a stage 2 hammer mill were received from FCIC Subtask 5.1: Preprocessing, Corn Stover Preprocessing (Neal Yancey and Sergio Hernandez, INL). Additional air classifier throughput, energy consumption and separation efficiency data were obtained from FCIC Subtask 5.1 (Neal Yancey, INL) for the new air classifier, which has three exit streams (lights, middle and heavies). These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Because the ash contents and particle sizes had not been analyzed in the laboratory at the time of the model runs, we assumed that the ash distributed proportionally with total mass into the lights and heavies in an air classifier having two exit streams (lights and heavies) and that the lights fraction from the air classifier was not removed.

ash content↗
DOE OSTI2012

Analytic Result for the Two-loop Six-point NMHV Amplitude in N = 4 Super Yang-Mills Theory

We provide a simple analytic formula for the two-loop six-point ratio function of planar N = 4 super Yang-Mills theory. This result extends the analytic knowledge of multi-loop six-point amplitudes beyond those with maximal helicity violation. We make a natural ansatz for the symbols of the relevant functions appearing in the two-loop amplitude, and impose various consistency conditions, including symmetry, the absence of spurious poles, the correct collinear behavior, and agreement with the operator product expansion for light-like (super) Wilson loops. This information reduces the ansatz to a small number of relatively simple functions. In order to fix these parameters uniquely, we utilize an explicit representation of the amplitude in terms of loop integrals that can be evaluated analytically in various kinematic limits. The final compact analytic result is expressed in terms of classical polylogarithms, whose arguments are rational functions of the dual conformal cross-ratios, plus precisely two functions that are not of this type. One of the functions, the loop integral {Omega}{sup (2)}, also plays a key role in a new representation of the remainder function R{sub 6}{sup (2)} in the maximally helicity violating sector. Another interesting feature at two loops is the appearance of a new (parity odd) x (parity odd) sector of the amplitude, which is absent at one loop, and which is uniquely determined in a natural way in terms of the more familiar (parity even) x (parity even) part. The second non-polylogarithmic function, the loop integral {tilde {Omega}}{sup (2)}, characterizes this sector. Both {Omega}{sup (2)} and {tilde {Omega}}{sup (2)} can be expressed as one-dimensional integrals over classical polylogarithms with rational arguments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Chromoelectric field correlator for quarkonium transport in the strongly coupled $ \mathcal{N}$ = 4 Yang-Mills plasma from AdS/CFT

Previous studies have shown that a gauge-invariant correlation function of two chromoelectric fields connected by a straight timelike adjoint Wilson line encodes crucial information about quark-gluon plasma (QGP) that determines the dynamics of small-sized quarkonium in the medium. Motivated by the successes of holographic calculations to describe strongly coupled QGP, we calculate the analog gauge-invariant correlation function in strongly coupled $\mathcal{N}$ = 4 supersymmetric Yang-Mills theory at finite temperature by using the AdS/CFT correspondence. Our results indicate that the transition processes between bound and unbound quarkonium states are suppressed in strongly coupled plasmas, and moreover, the leading contributions to these transition processes vanish in both the quantum Brownian motion and quantum optical limits of open quantum system approaches to quarkonia

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Using GANs to predict milling stability from limited data

Milling is a key manufacturing process that requires the selection of operating parameters that provide efficient performance. However, the presence of chatter, a self-excited vibration causing poor surface finish and potential damage to the machine and cutting tool, makes it challenging to select the appropriate parameters. To predict chatter, stability maps are commonly used, but their generation requires expensive data, making it difficult to employ these maps in industry. Therefore, there is a pressing need for an approach that can accurately predict stability maps using limited experimental data. This study introduces the new Encoder GAN (EGAN) approach based on Generative Adversarial Networks (GANs) that predicts stability maps using limited experimental data. The approach consists of the encoder, generator, and discriminator subnetworks and uses the trained encoder and generator to predict the target stability map. This versatile method can be applied to various tool setups and can accurately predict stability maps with limited experimental data (five to 10 cutting tests) even when there is little information available for unknown parameters. In conclusion, the study evaluates the proposed approach using both numerical data and experiments and demonstrates its superior performance compared to state-of-the-art benchmarks.

42 ENGINEERING↗
DOE OSTI2018

Effect of the Milling Conditions on the Properties of ZnO Doped with Fe

(Zn{sub 0.9}Fe{sub 0.1})O powders were produced with different ball to powder weight ratios (BPR) by ball milling of ZnO and Fe elemental powders. The BPR used were 15:1, 20:1, 25:1, and 30:1. The prepared samples were studied by x-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Mössbauer spectroscopy (MS). The XRD patterns showed a zinc oxide (ZnO) single phase with wurtzite structure, except for the 15:1 ratio, which exhibits an additionally bcc structure associated to α-Fe. The mean crystallite sizes were found to be around 100 Å. The Mössbauer spectra were fitted using two doublets, associated to the incorporation of Fe ions into the ZnO lattice, which correspond to the Fe{sup 3+} and Fe{sup 2+} oxidation states except for the 15:1 ratio, for which an additional sextet was necessary to obtain a good fit, this sextet was associated to segregated Fe into the sample. The increase of the BPR allowed that all Fe penetrated into the ZnO matrix. The magnetization measurement using VSM reveals that the system exhibits ferromagnetic behavior at room temperature. For sample with BPR 15:1, the ferromagnetism is due to the segregated Fe, and for higher BPRs, from 20:1 up to 30:1, we propose that their ferromagnetism is due to the percolation of polarons. These polarons appear due to the oxygen vacancies (detected by XRD) which are occupied by electrons, which appear in the charge balance. Exchange interaction between the electron spins located in the vacancies or holes and those of the magnetic impurities (Fe atoms) leads to the formation of bound magnetic polarons, which percolate, producing in this way magnetic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

On Dimensional Regularization in the Yang–Mills Theory

We suggest an asymptotic approach to renormalization in the case of dimensional regularization. As an example, the quantum Yang–Mills theory in the four-dimensional space-time is considered. A formula for the renormalized effective action is derived by using the asymptotic behavior of the bare coupling constant. Then we discuss the dimensional transmutation, the process of renormalization, and the properties of the coupling constant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2014

The one and a half monopoles solution of the SU(2) Yang–Mills–Higgs field theory

Recently we have reported on the existence of finite energy SU(2) Yang–Mills–Higgs particle of one-half topological charge. In this paper, we show that this one-half monopole can co-exist with a ’t Hooft–Polyakov monopole. The magnetic charge of the one-half monopole is of opposite sign to the magnetic charge of the ’t Hooft–Polyakov monopole. However the net magnetic charge of the configuration is zero due to the presence of a semi-infinite Dirac string along the positive z-axis that carries the other half of the magnetic monopole charge. The solution possesses gauge potentials that are singular along the z-axis, elsewhere they are regular. The total energy is found to increase with the strength of the Higgs field self-coupling constant λ. However the dipole separation and the magnetic dipole moment decrease with λ. This solution is non-BPS even in the BPS limit when the Higgs self-coupling constant vanishes. -- Highlights: •This one-half monopole can co-exist with a ’t Hooft–Polyakov monopole. •The magnetic charge of the one-half monopole and one monopole is of opposite sign. •This solution is non-BPS. •The net magnetic charge of the configuration is zero. •This solution upon Cho decomposition is only singular along the negative z-axis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Reformulations of Yang–Mills theories with space–time tensor fields

We provide the reformulations of Yang–Mills theories in terms of gauge invariant metric-like variables in three and four dimensions. The reformulations are used to analyze the dimension two gluon condensate and give gauge invariant descriptions of gluon polarization. In three dimensions, we obtain a non-zero dimension two gluon condensate by one loop computation, whose value is similar to the square of photon mass in the Schwinger model. In four dimensions, we obtain a Lagrangian with the dual property, which shares the similar but different property with the dual superconductor scenario. We also make discussions on the effectiveness of one loop approximation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

BRST renormalization of the first order Yang–Mills theory

We examine the renormalization of the first order formulation of the Yang–Mills theory, by using the BRST identities. These preserve the gauge invariance of the theory and enable a recursive proof of renormalizability to higher orders in perturbation theory. The renormalization involves non-linear mixings as well as re-scalings of the fields and sources, which lead to a renormalized action at all orders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗