Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

An efficient synthesis of graphenated carbon nanotubes over the tailored mesoporous molecular sieves by chemical vapor deposition

Highlights: ► Tailored 3D cubic Ni/KIT-6 with large pores was synthesized successfully. ► The new hybrid g-CNTs in large scale were synthesized using Ni/KIT-6 by CVD method. ► The use of mesoporous material by CVD method would be an ideal choice to prepare g-CNTs at reasonable cost. ► This type of g-CNTs might be a new avenue for nano-electronic applications. - Abstract: The new hybrid of graphenated carbon nanotubes (g-CNTs) was superior to either CNTs or graphene. Mesoporous 3D cubic Ni/KIT-6 were synthesized hydrothermally through organic template route and then were used as catalytic template for the production of g-CNTs using acetylene as a carbon precursor by chemical vapor deposition (CVD) method. The deposited new hybrid carbon materials were purified and analyzed by various physico-chemical techniques such as XRD, TGA, SEM, TEM and Raman spectroscopy techniques. The graphitization of CNTs was confirmed by TGA and HRTEM studies. Thermal stability, surface morphology, and structural morphology of these materials were revealed by TGA, SEM and TEM analysis, respectively. Moreover, the tailored mesoporous Ni/KIT-6 molecular sieves were found to possess better quality and massive quantity of g-CNTs produced compared to other catalytic template route.

36 MATERIALS SCIENCE↗

Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres: The study of photoluminescence and adsorption properties

Graphical abstract: Mesoporous hollow structure of Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphors. - Highlights: • Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres are prepared via the layer-by-layer technique. • The Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibit better adsorption capabilities of Pb{sup 2+}, Fe{sup 3+} than Cd{sup 2+}. • The Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibit strong green emission around 524 nm. • With the increase of doped Mn{sup 2+} concentration, the emission peak shows a red-shift. - Abstract: Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres were prepared via the layer-by-layer technique using CTAB as surfactant. The structures/microstructures and morphologies of the as-synthesized phosphors were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope and N{sub 2} adsorption–desorption porosimetry. The adsorption capacity to remove toxic metal ions in water was tested and the results showed that the Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibited better adsorption capabilities of Pb{sup 2+}, Fe{sup 3+} than Cd{sup 2+}. Moreover, the as-obtained hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphors exhibited strong green emission around 524 nm at room temperature. When the atomic ratio of Zn to Mn was 97:3, the emission intensity of Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphor was about 1.2 times that of commercial phosphors. Furthermore, with the increase of doped Mn{sup 2+} concentration, the emission peak showed a red-shift.

36 MATERIALS SCIENCE↗

The fabrication of foam-like 3D mesoporous NiO-Ni as anode for high performance Li-ion batteries

Graphical abstract: Foam-like 3 dimensional (3D) mesoporous NiO on 3D micro-porous Ni was fabricated. - Highlights: • We prepare NiO-Ni foam composite via hydrothermal etching and subsequent annealing. • The NiO exhibits novel foam-like 3D mesoporous architecture. • The NiO-Ni anode shows good cycle stability. - Abstract: Foam-like three dimensional mesoporous NiO on Ni foam was fabricated via facile hydrothermal etching and subsequent annealing treatment. The porous NiO consists of a large number of nanosheets with mean thickness about 50 nm, among which a large number of mesoscopic pores with size ranges from 100 nm to 1 μm distribute. The electrochemical performance of the as-prepared NiO-Ni as anode for lithium ion battery was studied by conventional charge/discharge test, which shows excellent cycle stability and rate capability. It exhibits initial discharge and charge capacities of 979 and 707 mA h g{sup −1} at a charge/discharge rate of 0.7 C, which maintain of 747 and 738 mA h g{sup −1} after 100 cycles. Even after 60 cycles at various rates from 0.06 to 14 C, the 10th discharge and charge capacities of the NiO-Ni electrode can revert to 699 and 683 mA h g{sup −1} when lowering the charge/discharge rate to 0.06 C.

36 MATERIALS SCIENCE↗

Mesoporous wormholelike carbon with controllable nanostructure for lithium ion batteries application

Highlights: • Wormholelike carbon (WMC) with controllable nanostructure is prepared by sol–gel method. • The reversible capacity of WMC is much higher than that of many other reported nanocarbons. • The effect of pore diameter on Li storage capacity is investigated. - Abstract: A class of mesoporous wormholelike carbon (WMC) with controllable nanostructure was prepared by sol–gel method and then used as the anode material of lithium-ion batteries. Based on the experimental results, it is found that the nanostructure of the as-prepared WMC plays an important role in the electrochemical performances. A suitable mesopore size is necessary for a high performance carbon-based anode material since it can not only guarantee effective mass transport channels but also provide large surface area. As a result, F30 with a mesopore size of 4.4 nm coupled with high surface area of 1077 m{sup 2} g{sup −1} shows a reversible capacity of 630 mAh g{sup −1}, much higher than commercial graphite and many other reported nanocarbons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Oriented and ordered mesoporous ZrO{sub 2}/TiO{sub 2} fibers with well-organized linear and spring structure

Graphical abstract: The ultra-stable order mesoporous ZrO{sub 2}/TiO{sub 2} fibers with well-organized linear and spring structure and large surface area under higher temperatures were prepared by a simple EISA process. - Highlights: • The ZrO{sub 2}/TiO{sub 2} fibers were prepared by EISA process combined with steam heat-treatment. • The mesoporous ZrO{sub 2}/TiO{sub 2} fibers have well-organized linear and spring structure. • The fibers were composed of oval rod nanocrystals of ZrTiO{sub 4}. - Abstract: The ultra-stable order mesoporous ZrO{sub 2}/TiO{sub 2} fibers with well-organized linear and spring structure and large surface areas under higher temperatures were prepared by a (simple evaporation-induced assembly) EISA process. The preparation, microstructures and formation processes were characterized by Fourier transformation infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N{sub 2} adsorption–absorption measurements. The fibers take on pinstripe configuration which is very orderly along or perpendicular to the axial direction of the fibers. The diameters of the pinstripe are in the region of 200–400 nm and arranges regularly, which are composed of oval rod nanocrystals of ZrTiO{sub 4}.

36 MATERIALS SCIENCE↗

A new strategy on utilizing nitrogen doped TiO{sub 2} in nanostructured solar cells: Embedded multifunctional N-TiO{sub 2} scattering particles in mesoporous photoanode

Highlights: • N-doped TiO{sub 2} scattering particles were synthesized for embedding into commercial photoanode of dye sensitized solar cells. • Embedded scatterers improved optical and electrical features of the cells. • These multifunctional scatterers increased cell performance up to 17%. - Abstract: Aggregated sub-micron size nitrogen doped TiO{sub 2} (N-TiO{sub 2}) particles with superior optical and electrical features were successfully synthesized for embedding into commercial mesoporous TiO{sub 2} photoelectrode of dye sensitized solar cells (DSSCs) as the light scattering particles compared to undoped one. X-ray photoelectron spectroscopy and absorption spectra confirmed that the titanium dioxide is sufficiently doped by nitrogen in N-TiO{sub 2} sample. Employing these high-surface N-TiO{sub 2} in mesoporous photoelectrode of solar cells, the power conversion efficiency of 8% has been achieved which shows 17% improvement for the optimum embedded level of doping (30 wt%) compared to commercial photoelectrode without additive; while enhanced efficiency is only 3% embedding undoped sub-micron size TiO{sub 2} particles. These results can introduce the novel multifunctional photoelectrode for nanostructured solar cells with enhanced values of scattering efficiency and improved electrical features including trap states density reduction in comparison to commercial mesoporous photoelectrodes.

14 SOLAR ENERGY↗

Hierarchically macro–mesoporous TiO{sub 2} film via self-assembled strategy for enhanced efficiency of dye sensitized solar cells

Highlights: • A new hierarchically macro–mesoporous TiO{sub 2} film is fabricated via TiF{sub 4} hydrolysis. • TiF{sub 4} hydrolysis is accompanied with self-assembled process of TiO{sub 2} nanoparticles. • The hierarchically porous TiO{sub 2} films show higher performance than nonporous film. - Abstract: The hierarchically porous structure of TiO{sub 2} film plays an important role on improved photoelectric conversion efficiency in dye-sensitized solar cells (DSSCs). It is highly required to develop a facile strategy to prepare the hierarchical porous photoelectrode. In this study, a novel hierarchically macro–mesoporous TiO{sub 2} film as photoelectrode of DSSCs is fabricated by a self-assembled process of TiO{sub 2} nanoparticles via TiF{sub 4} hydrolysis. The hydrolysis of TiF{sub 4} is accompanied with self-assembled process of TiO{sub 2} nanoparticles on the surface of electrophoretic-deposited titanate nanotube film which provides effective active sites for the deposition of TiO{sub 2} nanoparticles owing to a large amount of hydroxyl groups, resulting in the formation of hierarchically porous structures. The hierarchically porous TiO{sub 2} film is mainly composed of mesopores with a size of 2–50 nm and macropores with a wide range of 0.5–5 μm, which contribute to an obviously higher conversion performance (6.70%) than nonporous P25-TiO{sub 2} film (4.01%). The main reasons for enhanced conversion efficiency of hierarchically porous TiO{sub 2} film can be attributed to adsorption of more dye molecules, rapid diffusion and efficient transport of electrolyte, and longer electron lifetime. This work may provide new insights into preparing porous structure of TiO{sub 2} films in DSSCs for modification of photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

Preparation of mesoporous titanium dioxide anode by a film- and pore-forming agent for the dye-sensitized solar cell

Highlights: • PVP is used as a film- and pore-forming agent to prepare the mesoporous TiO{sub 2} anode. • The TiO{sub 2} anode supplies high surface area for the dye adsorption. • The DSSC efficiency is strongly dependent on the pore properties of the TiO{sub 2} anode. • The DSSC efficiency with the TiO{sub 2} anode prepared by 20 wt% PVP reaches 8.39%. - Abstract: A novel mean of generating mesoporous titanium dioxide (TiO{sub 2}) anodes by employing polyvinylpyrrolidone (PVP) as the film- and pore-forming agent are proposed for dye-sensitized solar cells (DSSCs). The influences on the morphology and photovoltaic performances of the TiO{sub 2} anodes are investigated by adjusting the PVP content in synthesizing the mesoporous TiO{sub 2} anodes. The photovoltaic conversion efficiency of the DSSC is found to be strongly dependent on the pore properties of the TiO{sub 2} anode. After the sintering process, the removal of the PVP leaves porously interconnected channel structures inside the TiO{sub 2} anode, supplying enhanced specific surface area for the dye adsorption as well as the efficient electron transmission. As a result, the TiO{sub 2} anode prepared by 20 wt% PVP presents the highest performances, based on which the DSSC achieves the highest conversion efficiency of 8.39%, approximately increased by 56.53% than that of the DSSC fabricated without PVP (5.36%).

36 MATERIALS SCIENCE↗

Mo-N-co-doped mesoporous TiO{sub 2} microspheres with enhanced visible light photocatalytic activity

Highlights: • The Mo-N-co-doped mesoporous TiO{sub 2} microspheres were synthesized via a solvothermal method and further nitriding treatment. • The properties of TiO{sub 2} microspheres can be tuned by Mo-N-co-doping. • Photocatalytic rate is much higher than Pure TiO{sub 2} catalyst powder and Mo doped TiO{sub 2} microspheres. • The higher activity is attributed to the large BET surface area, narrow band gap and intense light absorbance in visible region. - Abstract: Mo-N-co-doped mesoporous TiO{sub 2} microspheres were synthesized via a solvothermal method, followed by nitriding treatment under ammonia gas flow. The efficiency of the samples was investigated by monitoring the degradation of Rhodamine-B under visible light irradiation. The experimental results revealed that Mo-N-co-doped mesoporous TiO{sub 2} microspheres showed better performances than Mo-TiO{sub 2} microspheres. It was observed that; 0.1% molar quantity of Mo doped on TiO{sub 2} at 500 °C for 2 h under nitriding conditions gave highest photocatalytic activities. The nitridation under ammonia gas of Mo-TiO{sub 2} samples created oxygen vacant sites and led to incorporation of substitutional and interstitial Nitrogen. The enhanced visible light photocatalytic activities of Mo-N-co-doped TiO{sub 2} photocatalyst was attributed to the large surface areas, narrow band gap and intense light absorbance in visible region. This study may create a promising and eco-friendly method towards synthesis of metal and non-metals co-doped on semiconductor materials to improve their photocatalytic activities and applications.

36 MATERIALS SCIENCE↗

High rate lithium-sulfur batteries enabled by mesoporous TiO{sub 2} nanotubes prepared by electrospinning

Graphical abstract: Mesoporous titanium dioxide nanotubes (MTDNTs) used as host for sulfur was prepared by electrospinning technique and subsequent thermal treatment. The nanotube walls of MTDNTs act as a host for sulfur and the hollow structure is favorable for the fast transmission of Li{sup +} ions. After sulfur was encapsulated into the pores of nanotube walls of MTDNTs, the MTDNTs/S composite electrode displays a relatively good cycling performance and especially excellent rate performance (about 610 mAh g-1 at 8 C). - Highlights: • Mesoporous titanium dioxide nanotubes (MTDNTs) were fabricated by electrospinning and subsequent thermal treatment. • MTDNTs was used as host for sulfur, TEM and SEM analysis showed that sulfur distributed in the meso pores of MTDNTs walls. • MTDNTs/S composite cathode delivers a reversible discharge capacity of 610 mAh g{sup −1} at a high current rate of 8 C. - Abstract: Mesoporous titanium dioxide nanotubes (MTDNTs) were prepared by electrospinning and subsequent thermal treatment. The as-synthesized MTDNTs possess anatase mischcrystal structure, hollow texture morphology, and a relatively high specific surface area of 93.6 m{sup 2} g{sup −1} with a pore volume of 0.2190 cm{sup −3} g{sup −1}. The nanotube walls of MTDNTs act as a host for sulfur and the hollow structure is favorable for the fast transmission of Li{sup +} ions. After sulfur was encapsulated into the pores of nanotube walls of MTDNTs, the MTDNTs/S composite electrode displays a relatively good cycling performance and especially excellent rate performance (about 610 mAh g{sup −1} at 8 C). The retention capacity can be up to 74.2% when the discharge rate increases from 0.5C to 8.0 C.

36 MATERIALS SCIENCE↗

Facile room temperature CTAB-assisted synthesis of mesoporous nano-cobalt ferrites for enhanced magnetic behaviour

Highlights: • Synthesis of mesoporous nano-cobalt ferrites are carried out CTAB medium. • Crystalline cobalt ferrite phase was formed below CMC of CTAB. • Bilayer arrangement of CTA-OH-Fe-Co growing units leads to inter-particle pores. • Enhanced magnetic properties (M{sub s} and H{sub c}) were obtained in synthesized cobalt ferrites. - Abstract: We report a facile, room temperature synthesis of nanostructured mesoporous cobalt ferrites using the cationic surfactant, cetyltrimethylammonium bromide (CTAB). The synthesis was carried out at various concentrations of CTAB ranging from its pre- to post-micellar concentrations. The pristine and calcined samples exhibit pure cobalt ferrite phase which are confirmed by XRD studies. The morphology of all uncalcined samples was quasi-spherical as shown by TEM images. Nitrogen adsorption – desorption study on pristine samples indicates the presence of mesopores in them. The magnetic properties of the uncalcined and calcined samples were studied by vibrating sample magnetometry. Coercivity and saturation magnetization were found to vary with the concentration of the CTAB employed. Also, the pristine samples were soft magnets, whereas the calcined samples tended towards exhibiting hard magnetism. We have proposed a mechanism to explain the mesoporosity of nanostructured ferrite based the role of CTAB in the present synthetic method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced photon collection of high surface area carbonate-doped mesoporous TiO2 nanospheres in dye sensitized solar cells

Highlights: • Carbonate-doped mesoporous TiO{sub 2} showed enhanced DSSC efficiency (5.4%). • Carbonate-doped TiO{sub 2} indicated higher surface area and incident photon conversion efficiency. • Carbonate-doped TiO{sub 2} showed lower resistance and longer life time. - Abstract: Carbonate-doped mesoporous TiO{sub 2} nanospheres with anatase phase were successfully synthesized by the simple solvothermal method. The synthesized nanospheres were monodispersed and composed of particles having the size of 10–15 nm. Scanning transmission electron microscopy (STEM) analysis showed nanosphere with large number particles. STEM-mapping clearly showed that Ti, O, and C were homogeneously distributed. Incorporation of carbonate in TiO{sub 2} was confirmed by XPS analysis. The peak at 284.3 eV was assigned to CO and indicated the formation TiOC structure due to carbonate doping in TiO{sub 2} lattice. Dye-sensitized solar cells (DSSCs) containing the nanospheres were fabricated by spray coating technique using N719 dye. Carbonate-doped mesoporous TiO{sub 2} showed enhanced DSSC efficiency (5.4%) compared to undoped (3.4%) and commercially available TiO{sub 2} (P25) (2.4%). It indicated (1) higher surface area and incident photon conversion efficiency, (2) lower resistance and longer life time compared with undoped TiO{sub 2}.

14 SOLAR ENERGY↗

A novel low-temperature dendritic cyclotrimerization of 2,6-diacetyl pyridine leading to mesoporous carbon containing pyridine rings

A simple, direct synthesis of a mesoporous carbon containing pyridine rings is described. This synthesis utilizes the SiCl4 induced cyclotrimerization of 2,6-diacetylpyridine to make a dendritic polymer, built of alternating benzene and pyridine rings. The cyclotrimerization allows for a high degree of crosslinking to take place at low temperatures stabilizing the mesostructure and allowing the carbonization to be carried out at only 600°C, the lowest temperature reported to date for an N-doped mesoporous carbon. The functional mesoporous carbon so formed was found to have a surface area of 1275 m2/g, 35Å pores, and contain 6.8% N.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient internalization of mesoporous silica particles of different sizes by primary human macrophages without impairment of macrophage clearance of apoptotic or antibody-opsonized target cells

Macrophage recognition and ingestion of apoptotic cell corpses, a process referred to as programmed cell clearance, is of considerable importance for the maintenance of tissue homeostasis and in the resolution of inflammation. Moreover, macrophages are the first line of defense against microorganisms and other foreign materials including particles. However, there is sparse information on the mode of uptake of engineered nanomaterials by primary macrophages. In this study, mesoporous silica particles with cubic pore geometries and covalently fluorescein-grafted particles were synthesized through a novel route, and their interactions with primary human monocyte-derived macrophages were assessed. Efficient and active internalization of mesoporous silica particles of different sizes was observed by transmission electron microscopic and flow cytometric analysis and studies using pharmacological inhibitors suggested that uptake occurred through a process of endocytosis. Moreover, uptake of silica particles was independent of serum factors. The silica particles with very high surface areas due to their porous structure did not impair cell viability or function of macrophages, including the ingestion of different classes of apoptotic or opsonized target cells. The current findings are relevant to the development of mesoporous materials for drug delivery and other biomedical applications.

60 APPLIED LIFE SCIENCES↗

Formation of Vertically Oriented Channels during Calcination of Surfactant-Templated Titania-Doped Mesoporous Silica Thin Films

Here, the mesoporous structure development during calcination of titania-doped mesoporous silica thin films is characterized by in situ grazing-incidence small angle x-ray scattering (GISAXS). Varying amounts of titania (≤ 6 mol%) are incorporated in cetyltrimethylammonium bromide (CTAB) templated film by two methods in this study: dispersion of titania in the silica matrix, and fixing titania at the pore surface by complexation of the titania precursor with a sugar-based co-surfactant, dodecyl maltoside (C 12 G 2 ). Before calcination, films templated with only CTAB display a mesoporous structure with a mixture of in-plane 2D hexagonal and randomly oriented porous structure, while C 12 G 2 -complexed film possessed randomly oriented mesostructure only. Both methods yield a final structure of hexagonal close-packed pores orthogonally oriented to the substrate after calcination at 500 °C. This is attributed to weak Si-O-Ti bonds which allow sintering to occur at 500 °C, combined with unidirectional thermal contraction of the film in the vertical direction. Anisotropic stress and annealing of the films allows the randomly oriented pores to merge vertically and form channels with pore diameter of 2.3 ± 0.3 nm. Titania doping greater than 1% is required for this transformation in films with no C 12 G 2 surfactant used while the transformation was observed for films with C 12 G 2 complexation even at low (0.005%) titania doping, perhaps accentuated by orientational disorder introduced by the sugar surfactant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Response to Extreme Temperatures of Mesoporous Silica MCM-41: Porous Structure Transformation Simulation and Modification of Gas Adsorption Properties

In this paper, molecular dynamics (MD) and Monte Carlo (MC) simulations were applied together for the first time to reveal the porous structure transformation mechanisms of mesoporous silica MCM-41 subjected to temperatures up to 2885 K. Silica was experimentally characterized to inform the models and enable prediction of changes in gas adsorption/separation properties. MD simulations suggest that the pore closure process is activated by a collective diffusion of matrix atoms into the porous region, accompanied by bond reformation at the surface. Degradation is kinetically limited, such that complete pore closure is postponed at high heating rates. We experimentally observe decreased gas adsorption with increasing temperature in mesoporous silica heated at fixed rates, due to pore closure and structural degradation consistent with simulation predictions. Applying the Kissinger equation, we find a strong correlation between the simulated pore collapse temperatures and the experimental values which implies an activation energy of 416 ± 17 kJ/mol for pore closure. MC simulations give the adsorption and selectivity for thermally treated MCM-41, for N 2 , Ar, Kr, and Xe at room temperature within the 1–10 000 kPa pressure range. Relative to pristine MCM-41, we observe that increased surface roughness due to decreasing pore size amplifies the difference of the absolute adsorption amount differently for different adsorbate molecules. In particular, we find that adsorption of strongly interacting molecules can be enhanced in the low-pressure region while adsorption of weakly interacting molecules is inhibited. Finally, this then results in higher selectivity in binary mixture adsorption in mesoporous silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monitoring Depolymerization in Mesopores Using Dynamic Properties of Polymeric Melt Accessed via Dielectric Spectroscopy

Traditional design principles for heterogeneous catalysis guide the use of catalytic particles with mesosized (∼2–50 nm) pores to increase the number of surface-active sites by way of an increased surface area. However, the entry of long-chain polymers into such pores may be significantly limited by the size and entanglement of polymers in the melt state, thereby decreasing the number of accessible sites. Assessment of catalyst performance from traditional reactor-based studies averages over intrapore reaction events as well as reactions on the surface of a particle, resulting in an inability to distinguish between differences in site accessibility and activity. Techniques that assess the intrapore performance can inform the design of future heterogeneous catalysts for polymer upcycling. In this work, we demonstrate the use of broadband dielectric spectroscopy to monitor depolymerization of a polymer melt within mesopores via changes in the segmental relaxation time scale of amorphous polymer chains. In particular, we highlight the use of an anodic aluminum oxide (AAO) membrane as a readily available model for catalyst pores with a well-characterized pore morphology. The decrease in the segmental relaxation (α-relaxation) time of the melt with increasing chain scission emerges as a measure of the extent of polymer deconstruction inside mesopores. To demonstrate the utility of this technique, we demonstrate the decomposition of two commercial poly(propylene carbonate) polymers with different decomposition rates within mesopores. As the polymers depolymerize, their segmental relaxation time decreases as the molecular weight decreases (as predicted by the Fox–Flory equation). The BDS-measured change in segmental relaxation time mirrors the expected trend based on change in molecular weight measured by size exclusion chromatography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando Grazing Incidence Small-Angle X-ray Scattering/X-ray Diffraction of Model Ordered Mesoporous Lithium-Ion Battery Anodes

Emergent lithium-ion (Li + ) batteries commonly rely on nanostructuring of the active electrode materials to decrease the Li + ion diffusion path length and to accommodate the strains associated with the insertion and de-insertion of Li + , but in many cases these nanostructures evolve during electrochemical charging–discharging. This change in the nanostructure can adversely impact performance, and challenges remain regarding how to control these changes from the perspective of morphological design. In order to address these questions, operando grazing-incidence small-angle X-ray scattering and X-ray diffraction (GISAXS/GIXD) were used to assess the structural evolution of a family of model ordered mesoporous NiCo 2 O 4 anode films during battery operation. The pore dimensions were systematically varied and appear to impact the stability of the ordered nanostructure during the cycling. For the anodes with small mesopores (≈9 nm), the ordered nanostructure collapses during the first two charge–discharge cycles, as determined from GISAXS. This collapse is accompanied by irreversible Li-ion insertion within the oxide framework, determined from GIXD and irreversible capacity loss. Anodes with larger ordered mesopores (17–28 nm) mostly maintained their nanostructure through the first two cycles with reversible Li-ion insertion. During the second cycle, there was a small additional deformation of the mesostructure. Furthermore, this preservation of the ordered structure lead to significant improvement in capacity retention during these first two cycles; but, a gradual loss in the ordered nanostructure from continuing deformation of the ordered structure during additional charge–discharge cycles leads to capacity decay in battery performance. We translate these multiscale operando measurements provide insight into how changes at the atomic scale (lithium insertion and de-insertion) to the nanostructure during battery operation. Moreover, small changes in the nanostructure can build up to significant morphological transformations that adversely impact battery performance through multiple charge–discharge cycles.

25 ENERGY STORAGE↗