Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “load”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Impact of Ni and Mg Loadings on Dry Reforming Performance of Pt/Ceria-Zirconia Catalysts

The isolated effects of Ni and Mg on a series of Pt/Ce 0.6 Zr 0.4 O 2 (CZO) reforming catalysts were evaluated and used to formulate an improved catalyst with both Ni and Mg present. The dry reforming reaction results indicate that Ni enhances the CH 4 conversion at low temperatures while Mg improves the H 2 :CO ratio and stability, but requires high temperatures to reach similar conversions. The detection of coke (5.5 X 10 -4 g/g cat •h) over the 2.7Ni-CZO sample led to the examination of the 2.7Ni-0.50Mg-CZO sample. The catalyst activity results and the absence of coke formation over the 2.7Ni-0.50Mg-CZO sample confirmed that both Ni and Mg are needed to obtain a balance between catalyst activity and stability. The catalysts tested yielded low temperature activity with 10 % CH 4 conversions at temperature <500 °C. Furthermore, this work provides key insights into the proper design of low temperature reforming catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Broad Substrate Specificity of the Loading Didomain of the Lipomycin Polyketide Synthase

LipPks1, a polyketide synthase subunit of the lipomycin synthase, is believed to catalyze the polyketide chain initiation reaction using isobutyryl-CoA as a substrate, followed by an elongation reaction with methylmalonyl-CoA to start the biosynthesis of antibiotic alpha-lipomycin in Streptomyces aureofaciens Tu117. Recombinant LipPks1, containing the thioesterase domain from the 6-deoxyerythronolide B synthase, was produced in Escherichia coli, and its substrate specificity was investigated in vitro. Surprisingly, several different acyl-CoAs, including isobutyryl-CoA, were accepted as the starter substrates, while no product was observed with acetyl-CoA. These results demonstrate the broad substrate specificity of LipPks1 and may be applied to producing new antibiotics.

Yuzawa, S↗

GEOMETRY OF DAMAGE IN SHOCK LOADED COPPER AND TANTALUM

Cavities of coalesced voids have been found in recovered samples of Tantalum in high-explosive-driven experiments. The boundaries of these cavities are imprinted with details of the coalescence and void growth processes. One way of quantifying these details is to measure the roughness of the surfaces. In this work, we calculate the roughness of 2D cross sections of such cavity surfaces from micrographs by analyzing the images with the box counting technique. Spall plane damage driven by flyer plates in Copper samples is also analyzed. The different length scale regimes found will be discussed.

36 MATERIALS SCIENCE↗

Tailored ramp-loading via shock release of stepped-density reservoirs

The concept of a gradient piston drive has been extended from that of a single component reservoir, such as a high explosive, to that of a multi-component reservoir that utilizes low density foams and large shocks to achieve high pressures ({approx}3.5 mbar) and controlled pressure vs. time profiles on a driven sample. Simulated and experimental drives shaped through the use of multiple component (including carbonized resorcinol formaldehyde and SiO{sub 2} foam) reservoirs are compared. Individual density layers in a multiple component reservoir are shown to correlate with velocity features in the measured drive which enables the ability to tune a pressure drive by adjusting the components of the reservoir. Pre-shot simulations are shown to be in rough agreement with the data, but post-shot simulations involving the use of simulated plasma drives were needed to achieve an exact match. Results from a multiple component reservoir shot ({approx}3.5 mbar) at the National Ignition Facility are shown.

36 MATERIALS SCIENCE↗

Overview of the results on divertor heat loads in RMP controlled H-modeplasmas on DIII-D

This paper demonstrates the manipulation of power deposition on divertor targets at DIII-D by the application of resonant magnetic perturbations (RMPs) for suppression of large type-I edge localized modes (ELMs) is analysed. We discuss the modification of the ELM characteristics by the RMP applied. It is shown that the width of the deposition pattern in ELMy H-mode depends linearly on the ELM deposited energy, whereas in the RMP phase of the discharge those patterns are controlled by the externally induced magnetic perturbation. It was also found that the manipulation of heat transport due to the application of small, edge RMP depends on the plasma pedestal electron collisionality. We then compare in this analysis RMP and no RMP phases with and without complete ELM suppression. At high , the heat flux during the ELM suppressed phase is of the same order as the inter-ELM and the no-RMP phase. However, below this collisionality value, a slight increase in the total power flux to the divertor is observed during the RMP phase. We surmised that this is most likely caused by a more negative potential at the divertor surface due to hot electrons reaching the divertor surface from the pedestal area along perturbed, open field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗