Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “level set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Improved Relief Valve Would Be Less Susceptible to Failure

The balanced-piston relief valve with side vented reaction cavity has been proposed as an improved alternative to a conventional high-pressure, high-flow relief valve. The proposed valve would be less susceptible to failure. A typical conventional high-pressure, high-flow relief valve contains a piston that is exposed to the upstream pressure across the full valve-seat diameter and is held against the valve seat and the upstream pressure by a large spring. In the event of an increase in upstream pressure to a level above the valve set point (the pressure above which the valve opens), the opening force on the piston can be so large that the piston becomes accelerated to a speed high enough that the ensuing hard impact of the piston within the valve housing results in failure of the valve. For a given flow cross section, the proposal would significantly reduce the force, thereby reducing susceptibility to failure. A basic version of the proposed balanced-piston relief valve with side vented reaction cavity is described.

Farner, Bruce R.↗

Coherent Anti-Stokes Raman Spectroscopic Thermometry in a Supersonic Combustor

An experiment has been conducted to acquire data for the validation of computational fluid dynamics codes used in the design of supersonic combustors. The flow in a supersonic combustor, consisting of a diverging duct with a single downstream-angled wail injector, is studied. Combustor entrance Mach number is 2 and enthalpy nominally corresponds to Mach 7 flight. The primary measurement technique is coherent anti-Stokes Raman spectroscopy, but surface pressures and temperatures have also been acquired. Modern design of experiment techniques have been used to maximize the quality of the data set (for the given level of effort) and to minimize systematic errors. Temperature maps are obtained at several planes in the flow for a case in which the combustor is piloted by injecting fuel upstream of the main injector and one case in which it is not piloted. Boundary conditions and uncertainties are characterized.

Cutler, A. D.↗

Policy-Based Management Natural Language Parser

The Policy-Based Management Natural Language Parser (PBEM) is a rules-based approach to enterprise management that can be used to automate certain management tasks. This parser simplifies the management of a given endeavor by establishing policies to deal with situations that are likely to occur. Policies are operating rules that can be referred to as a means of maintaining order, security, consistency, or other ways of successfully furthering a goal or mission. PBEM provides a way of managing configuration of network elements, applications, and processes via a set of high-level rules or business policies rather than managing individual elements, thus switching the control to a higher level. This software allows unique management rules (or commands) to be specified and applied to a cross-section of the Global Information Grid (GIG). This software embodies a parser that is capable of recognizing and understanding conversational English. Because all possible dialect variants cannot be anticipated, a unique capability was developed that parses passed on conversation intent rather than the exact way the words are used. This software can increase productivity by enabling a user to converse with the system in conversational English to define network policies. PBEM can be used in both manned and unmanned science-gathering programs. Because policy statements can be domain-independent, this software can be applied equally to a wide variety of applications.

James, Mark↗

Master Metadata Repository and Metadata-Management System

A master metadata repository (MMR) software system manages the storage and searching of metadata pertaining to data from national and international satellite sources of the Global Ocean Data Assimilation Experiment (GODAE) High Resolution Sea Surface Temperature Pilot Project [GHRSSTPP]. These sources produce a total of hundreds of data files daily, each file classified as one of more than ten data products representing global sea-surface temperatures. The MMR is a relational database wherein the metadata are divided into granulelevel records [denoted file records (FRs)] for individual satellite files and collection-level records [denoted data set descriptions (DSDs)] that describe metadata common to all the files from a specific data product. FRs and DSDs adhere to the NASA Directory Interchange Format (DIF). The FRs and DSDs are contained in separate subdatabases linked by a common field. The MMR is configured in MySQL database software with custom Practical Extraction and Reporting Language (PERL) programs to validate and ingest the metadata records. The database contents are converted into the Federal Geographic Data Committee (FGDC) standard format by use of the Extensible Markup Language (XML). A Web interface enables users to search for availability of data from all sources.

Armstrong, Edward↗

Design for Minimum Risk

Design for Minimum Risk (DFMR) is a term used by NASA programs as an expansion of the general hazard reduction process where if an identified hazard cannot be eliminated, the design is modified to reduce the associated mishap risk to an acceptable level. DFMR is a set of specific requirements to minimize risk. DFMR is not well understood and there are many misconceptions concerning the meaning and use. This paper will provide insight into the use of DFMR for space applications; it s comparison to other hazard mitigation strategies and examples of how the approach has been used in the past. It will also highlight documents used by NASA on various programs to determine DFMR.

Wetherholt, Jon↗

Processing TES Level-2 Data

TES Level 2 Subsystem is a set of computer programs that performs functions complementary to those of the program summarized in the immediately preceding article. TES Level-2 data pertain to retrieved species (or temperature) profiles, and errors thereof. Geolocation, quality, and other data (e.g., surface characteristics for nadir observations) are also included. The subsystem processes gridded meteorological information and extracts parameters that can be interpolated to the appropriate latitude, longitude, and pressure level based on the date and time. Radiances are simulated using the aforementioned meteorological information for initial guesses, and spectroscopic-parameter tables are generated. At each step of the retrieval, a nonlinear-least-squares- solving routine is run over multiple iterations, retrieving a subset of atmospheric constituents, and error analysis is performed. Scientific TES Level-2 data products are written in a format known as Hierarchical Data Format Earth Observing System 5 (HDF-EOS 5) for public distribution.

Poosti, Sassaneh↗

Centralized Planning for Multiple Exploratory Robots

A computer program automatically generates plans for a group of robotic vehicles (rovers) engaged in geological exploration of terrain. The program rapidly generates multiple command sequences that can be executed simultaneously by the rovers. Starting from a set of high-level goals, the program creates a sequence of commands for each rover while respecting hardware constraints and limitations on resources of each rover and of hardware (e.g., a radio communication terminal) shared by all the rovers. First, a separate model of each rover is loaded into a centralized planning subprogram. The centralized planning software uses the models of the rovers plus an iterative repair algorithm to resolve conflicts posed by demands for resources and by constraints associated with the all the rovers and the shared hardware. During repair, heuristics are used to make planning decisions that will result in solutions that will be better and will be found faster than would otherwise be possible. In particular, techniques from prior solutions of the multiple-traveling- salesmen problem are used as heuristics to generate plans in which the paths taken by the rovers to assigned scientific targets are shorter than they would otherwise be.

Estlin, Tara↗

Human Health Countermeasures (HHC) Element Management Plan: Human Research Program

NASA s Human Research Program (HRP) is an applied research and technology program within the Human Exploration and Operations Mission Directorate (HEOMD) that addresses human health and performance risk mitigation strategies in support of exploration missions. The HRP research and technology development is focused on the highest priority risks to crew health and safety with the goal of ensuring mission success and maintaining long-term crew health. Crew health and performance standards, defined by the NASA Chief Health and Medical Officer (CHMO), set the acceptable risk level for exploration missions. The HRP conducts research to inform these standards as well as provide deliverables, such as countermeasures, that ensure standards can be met to maximize human performance and mission success. The Human Health Countermeasures (HHC) Element was formed as part of the HRP to develop a scientifically-based, integrated approach to understanding and mitigating the health risks associated with human spaceflight. These health risks have been organized into four research portfolios that group similar or related risks. A fifth portfolio exists for managing technology developments and infrastructure projects. The HHC Element portfolios consist of: a) Vision and Cardiovascular; b) Exercise and Performance; c) Multisystem; d) Bone; and e) Technology and Infrastructure. The HHC identifies gaps associated with the health risks and plans human physiology research that will result in knowledge required to more fully understand risks and will result in validated countermeasures to mitigate risks.

Norsk, Peter↗

Comparison of an Inductance In-Line Oil Debris Sensor and Magnetic Plug Oil Debris Sensor

The objective of this research was to compare the performance of an inductance in-line oil debris sensor and magnetic plug oil debris sensor when detecting transmission component health in the same system under the same operating conditions. Both sensors were installed in series in the NASA Glenn Spiral Bevel Gear Fatigue Rig during tests performed on 5 gear sets (pinion/gear) when different levels of damage occurred on the gear teeth. Results of this analysis found both the inductance in-line oil debris sensor and magnetic plug oil debris sensor have benefits and limitations when detecting gearbox component damage.

Dempsey, Paula J.↗

Challenges for Life Support Systems in Space Environments, Including Food Production

Environmental Control and Life Support Systems (ECLSS) refer to the technologies needed to sustain human life in space environments. Histor ically these technologies have focused on providing a breathable atmo sphere, clean water, food, managing wastes, and the associated monitoring capabilities. Depending on the space agency or program, ELCSS has sometimes expanded to include other aspects of managing space enviro nments, such as thermal control, radiation protection, fire detection I suppression, and habitat design. Other times, testing and providing these latter technologies have been associated with the vehicle engi neering. The choice of ECLSS technologies is typically driven by the mission profile and their associated costs and reliabilities. These co sts are largely defined by the mass, volume, power, and crew time req uirements. For missions close to Earth, e.g., low-Earth orbit flights, stowage and resupply of food, some 0 2, and some water are often the most cost effective option. But as missions venture further into spa ce, e.g., transit missions to Mars or asteroids, or surface missions to Moon or Mars, the supply line economics change and the need to clos e the loop on life support consumables increases. These are often ref erred to as closed loop or regenerative life support systems. Regardless of the technologies, the systems must be capable of operating in a space environment, which could include micro to fractional g setting s, high radiation levels, and tightly closed atmospheres, including perhaps reduced cabin pressures. Food production using photosynthetic o rganisms such as plants by nature also provides atmospheric regenerat ion (e.g., CO2 removal and reduction, and 0 2 production), yet to date such "bioregenerative" technologies have not been used due largely t o the high power requirements for lighting. A likely first step in te sting bioregenerative capabilities will involve production of small a mounts of fresh foods to supplement to crew's diet. As humans venture further into space, regenerative life support technologies will becom e more important, and gathering accurate data on their performance an d reliabilities will require long lead times. As we learn more about sustainable living in space, we almost certainly learn more about sust ainable living on Earth.

Wheeler, Raymond M.↗

Analysis of Dual Rotating Rake Data from the NASA Glenn Advanced Noise Control Fan Duct with Artificial Sources

The Rotating Rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. Initially, the mode amplitudes and phases were quantified from a single rake measurement at one axial location. To directly measure the modes propagating in both directions within a duct, a second rake was mounted to the rotating system with an offset in both the axial and the azimuthal directions. The rotating rake data analysis technique was then extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode levels at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode amplitudes for the modes propagating in both directions within the duct. Validation experiments have been conducted using artificial acoustic sources. Results are shown for the measurement of the standing waves in the duct from sound generated by one and two acoustic sources that are separated into the component modes propagating in both directions within the duct. Measured reflection coefficients from the open end of the duct are compared to analytical predictions.

Noise↗

Requirement Development Process and Tools

Requirements capture the system-level capabilities in a set of complete, necessary, clear, attainable, traceable, and verifiable statements of need. Requirements should not be unduly restrictive, but should set limits that eliminate items outside the boundaries drawn, encourage competition (or alternatives), and capture source and reason of requirement. If it is not needed by the customer, it is not a requirement. They establish the verification methods that will lead to product acceptance. These must be reproducible assessment methods.

Tools↗

Method of Obtaining High Resolution Intrinsic Wire Boom Damping Parameters for Multi-Body Dynamics Simulations

The goal of NASA's Magnetospheric MultiScale (MMS) mission is to understand magnetic reconnection with sensor measurements from four spinning satellites flown in a tight tetrahedron formation. Four of the six electric field sensors on each satellite are located at the end of 60- meter wire booms to increase measurement sensitivity in the spin plane and to minimize motion coupling from perturbations on the main body. A propulsion burn however, might induce boom oscillations that could impact science measurements if oscillations do not damp to values on the order of 0.1 degree in a timely fashion. Large damping time constants could also adversely affect flight dynamics and attitude control performance. In this paper, we will discuss the implementation of a high resolution method for calculating the boom's intrinsic damping, which was used in multi-body dynamics simulations. In summary, experimental data was obtained with a scaled-down boom, which was suspended as a pendulum in vacuum. Optical techniques were designed to accurately measure the natural decay of angular position and subsequently, data processing algorithms resulted in excellent spatial and temporal resolutions. This method was repeated in a parametric study for various lengths, root tensions and vacuum levels. For all data sets, regression models for damping were applied, including: nonlinear viscous, frequency-independent hysteretic, coulomb and some combination of them. Our data analysis and dynamics models have shown that the intrinsic damping for the baseline boom is insufficient, thereby forcing project management to explore mitigation strategies.

Yew, Alvin G.↗

Method of Using Power Grid as Large Antenna for Geophysical Imaging

A high-voltage power transmission system is used as an extremely large antenna to extract spatiotemporal space, physical, and geological information from geomagnetically induced currents (GIC). A differential magnetometer method is used to measure GIC and involves acquiring line measurements from a first fluxgate magnetometer under a high-voltage transmission line, acquiring natural field measurements from a reference magnetometer nearby but not under the transmission line, subtracting the natural field measurements from the line measurements, and determining the GIC-related Biot-Savart field from the difference. NASA warning and alarm systems can be triggered based on determinations of GIC amplitude levels that exceed a set threshold value.

Pulkkinen, Antti A.↗

A Model Predictive Control Approach for In-Flight Acoustic Constraint Compliance

Vehicle noise remains one of the major barriers to public acceptance of Urban Air Mobility-class aircraft. This work focuses on motion planning for aircraft in noise-sensitive areas. A nonlinear Model Predictive Path Integral~(MPPI) control law is used to generate a finite-horizon trajectory that satisfies acoustic level constraints at a set of observer locations. The MPPI framework places no restrictions on the class of state-dependent cost functionals that can be employed, making it well-suited for use with sophisticated acoustic models and metrics, in addition to dynamic and mission-relevant constraints. The proposed control law is also suitable for implementation in a real-time application. A simulation example demonstrates the ability of the controller to modify the flight trajectory in order to satisfy acoustic constraints at multiple measurement locations.

Aircraft motion planning↗

Urban Air Mobility Noise: Current Practice, Gaps, and Recommendations

In 2018, NASA formed an Urban Air Mobility Noise Working Group to assemble noise experts from industry, universities and government agencies to identify, discuss, and address urban air mobility (UAM) noise issues. This paper presents a set of high-level goals intended to address barriers associated with UAM noise that may hamper their entry into service. It summarizes the current practice, identifies gaps in the current practice, and makes recommendations to address the gaps to achieve the high-level goals in four areas of interest: Tools and Technologies, Ground and Flight Testing, Human Response and Metrics, and Regulation and Policy.

urban air mobility↗

A Model Predictive Control Approach for In-Flight Acoustic Constraint Compliance

Vehicle noise remains one of the major barriers to public acceptance of Urban Air Mobility class aircraft. This work focuses on motion planning for aircraft in noise-sensitive areas. A nonlinear Model Predictive Path Integral (MPPI) control law is used to generate a finite horizon trajectory that satisfies acoustic level constraints at a set of (three-dimensional) observer locations. The MPPI framework places no restrictions on the class of state-dependent cost functionals that can be employed, making it well-suited for use with sophisticated acoustic models and metrics, in addition to dynamic and mission-relevant constraints. The model predictive control architecture is also suitable for implementation in a real-time application. A simulation example demonstrates the ability of the controller to modify the flight trajectory in order to satisfy acoustic constraints at multiple measurement locations.

acoustically-aware vehicle↗

A Model Predictive Control Approach for In-Flight Acoustic Constraint Compliance

Vehicle noise remains one of the major barriers to public acceptance of Urban Air Mobility-class aircraft. This work focuses on motion planning for aircraft in noise-sensitive areas. A nonlinear Model Predictive Path Integral (MPPI) control law is used to generate a finite-horizon trajectory that satisfies acoustic level constraints at a set of (three-dimensional) observer locations. The MPPI framework places no restrictions on the class of state-dependent cost functionals that can be employed, making it well-suited for use with sophisticated acoustic models and metrics, in addition to dynamic and mission-relevant constraints. The model predictive control architecture is also suitable for implementation in a real-time application. A simulation example demonstrates the ability of the controller to modify the flight trajectory in order to satisfy acoustic constraints at multiple measurement locations.

acoustically-aware vehicle↗