Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large scale network”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Measuring Small- and Medium-Scale TEC Variations and Irregularities from Ground-Based GNSS Observations

This paper describes approaches to measuring small- and medium-scale spatial rate of vertical TEC from GNSS observations. The horizontal scale size measured by small-scale TEC spatial rate (STSR, in TECU/km), including its latitude and longitude components, ranges from about 1.8 km to 15 km at 450 km altitude. The medium-scale TEC gradient components can be derived from global ionospheric map (GIM) based TEC gradient (GBTG) over about 110 km horizontally at low and middle latitudes, with smaller scale lengths in the longitude component in the polar region. Our analyses of GPS data show that the latitude component of STSR and GBTG is much larger than the longitude component. The spatial rates in most regions of the globe are relatively small, and their absolute mean values are mostly under 0.03 TECU/km. However, STSR is substantially larger, often greater than 0.05 TECU/km, in the equatorial ionospheric anomaly (EIA) region than in other regions, or when ionospheric disturbances occur. The disturbances include ionospheric irregularities, significant changes of regional ionospheric state during space weather events, and traveling ionospheric disturbances. Combined global TEC gradient (CGTG) with STSR and GBTG is also shown in this paper as snapshots using data from networks of more than three thousand GNSS receivers. The comparisons between STSR and GBTG indicate that their regional variation patterns are consistent though STSR is often larger than GBTG in the equatorial anomaly region or during ionospheric disturbances particularly during space weather events. The difference is attributed to the fact that the global TEC mapping technique may smooth the gradient in regions where spatial variations are large at small- and medium scales.

Akopian, Vardan↗
NASA NTRS1975

Solar microclimatology

It has become apparent in recent years that solar energy can be used for electric power production by several methods. Because of the diffuse nature of the solar insolation, the area involved in any central power plant design can encompass several square miles. A detailed design of these large area collection systems will require precise knowledge of the local solar insolation. Detailed information will also be needed concerning the temporal nature of the insolation and the local spatial distribution. Therefore, insolation data was collected and analyzed for a network of sensors distributed over an area of several square kilometers in Arizona. The analyses of this data yielded probability distributions of cloud size, velocity, and direction of motion which were compared with data obtained from the National Weather Service. Microclimatological analyses were also performed for suitable modeling parameters pertinent to large scale electric power plant design. Instrumentation used to collect the data is described.

Mckenney, D. B.↗
NASA NTRS1984

A kinetic energy study of the meso beta-scale storm environment during AVE-SESAME 5 (20-21 May 1979)

Kinetic energy of the near storm environment was analyzed by meso beta scale data. It was found that horizontal winds in the 400 to 150 mb layer strengthen rapidly north of the developing convection. Peak values then decrease such that the maximum disappears 6 h later. Southeast of the storms, wind speeds above 300 mb decrease nearly 50% during the 3 h period of most intense thunderstorm activity. When the convection dissipates, wind patterns return to prestorm conditions. The mesoscale storm environment of AVE-SESAME 5 is characterized by large values of cross contour generation of kinetic energy, transfers of energy to nonresolvable scales of motion, and horizontal flux divergence. These processes are maximized within the upper troposphere and are greatest during times of strongest convection. It is shown that patterns agree with observed weather features. The southeast area of the network is examined to determine causes for vertical wind variations.

Printy, M. F.↗
NASA NTRS1986

Networking ground-based images of Comet Halley during the Giotto encounter

During the period immediately before and after the European, Russian, and Japanese spacecraft encounters with Comet Halley in early March 1986, sequences of ground-based electronic images of the comet, obtained at Table Mountain Observatory (TMO), CA, were transmitted via the Space Physics Analysis Network (SPAN) to the European Space Operations Centre (ESOC), and to University College London (UCL). During the 48-h period when the European Space Agency spacecraft Giotto was within the extended coma of Comet Halley, the ground-based images revealed that the comet displayed several spectacular near-nuclear and large-scale features. The TMO images provided a format for the interpretation of the unique in situ results obtained during the closest of the five spacecraft encounters with Comet Halley.

Rees, David↗
NASA NTRS1991

Video data compression using artificial neural network differential vector quantization

An artificial neural network vector quantizer is developed for use in data compression applications such as Digital Video. Differential Vector Quantization is used to preserve edge features, and a new adaptive algorithm, known as Frequency-Sensitive Competitive Learning, is used to develop the vector quantizer codebook. To develop real time performance, a custom Very Large Scale Integration Application Specific Integrated Circuit (VLSI ASIC) is being developed to realize the associative memory functions needed in the vector quantization algorithm. By using vector quantization, the need for Huffman coding can be eliminated, resulting in superior performance against channel bit errors than methods that use variable length codes.

Krishnamurthy, Ashok K.↗
NASA NTRS2001

Latency Hiding in Dynamic Partitioning and Load Balancing of Grid Computing Applications

The Information Power Grid (IPG) concept developed by NASA is aimed to provide a metacomputing platform for large-scale distributed computations, by hiding the intricacies of highly heterogeneous environment and yet maintaining adequate security. In this paper, we propose a latency-tolerant partitioning scheme that dynamically balances processor workloads on the.IPG, and minimizes data movement and runtime communication. By simulating an unsteady adaptive mesh application on a wide area network, we study the performance of our load balancer under the Globus environment. The number of IPG nodes, the number of processors per node, and the interconnected speeds are parameterized to derive conditions under which the IPG would be suitable for parallel distributed processing of such applications. Experimental results demonstrate that effective solution are achieved when the IPG nodes are connected by a high-speed asynchronous interconnection network.

Das, Sajal K.↗
NASA NTRS2005

Mapping of ice layer extent and snow accumulation in the percolation zone of the Greenland ice sheet

The Greenland ice sheet underwent record extensive melt in 2002 and prolonged melt in 2003. The severe melting created a significant and extensive ice layer over the Greenland ice sheet. An innovative approach is developed to detect the ice layer formation using data acquired by the SeaWinds scatterometer on the QuikSCAT satellite. QuikSCAT backscatter together with in situ data from automatic weather stations of the Greenland Climate Network are used to map the extent of ice layer formation. The results reveal areas of extensive ice layer formed by the 2002 melt, which is consistent with the maximum melt extent in 2002. Moreover, during freezing seasons, QuikSCAT data show a linear decrease in backscatter (in decibels or dB) that is related to the amount of snow accumulation in the ice layer formation region. This snow accumulation signature is caused by the attenuation of radar waves in the snow layer, accumulating since the last major melt event, whose thickness appears as an exponential function in relation to the backscatter signature. We use the Greenland Climate Network data to calibrate the QuikSCAT accumulation rate in order to estimate and map snow accumulation. QuikSCAT results capture the extreme snowfall in mid-April 2003, which deposited more than 0.5 m of snow in a day as measured by the automated weather station at the NASA South East site. Large-scale QuikSCAT results show an anomalous increase of snow accumulation over the southeast region of Greenland during the 2002-2003 freezing season.

snow↗
NASA NTRS1993

Internetworking satellite and local exchange networks for personal communications applications

The demand for personal communications services has shown unprecedented growth, and the next decade and beyond promise an era in which the needs for ubiquitous, transparent and personalized access to information will continue to expand in both scale and scope. The exchange of personalized information is growing from two-way voice to include data communications, electronic messaging and information services, image transfer, video, and interactive multimedia. The emergence of new land-based and satellite-based wireless networks illustrates the expanding scale and trend toward globalization and the need to establish new local exchange and exchange access services to meet the communications needs of people on the move. An important issue is to identify the roles that satellite networking can play in meeting these new communications needs. The unique capabilities of satellites, in providing coverage to large geographic areas, reaching widely dispersed users, for position location determination, and in offering broadcast and multicast services, can complement and extend the capabilities of terrestrial networks. As an initial step in exploring the opportunities afforded by the merger of satellite-based and land-based networks, several experiments utilizing the NASA ACTS satellite and the public switched local exchange network were undertaken to demonstrate the use of satellites in the delivery of personal communications services.

Wolff, Richard S.↗
NASA NTRS2006

Biology Inspired Approach for Communal Behavior in Sensor Networks

Research in wireless sensor network technology has exploded in the last decade. Promises of complex and ubiquitous control of the physical environment by these networks open avenues for new kinds of science and business. Due to the small size and low cost of sensor devices, visionaries promise systems enabled by deployment of massive numbers of sensors working in concert. Although the reduction in size has been phenomenal it results in severe limitations on the computing, communicating, and power capabilities of these devices. Under these constraints, research efforts have concentrated on developing techniques for performing relatively simple tasks with minimal energy expense assuming some form of centralized control. Unfortunately, centralized control does not scale to massive size networks and execution of simple tasks in sparsely populated networks will not lead to the sophisticated applications predicted. These must be enabled by new techniques dependent on local and autonomous cooperation between sensors to effect global functions. As a step in that direction, in this work we detail a technique whereby a large population of sensors can attain a global goal using only local information and by making only local decisions without any form of centralized control.

Jones, Kennie H.↗
NASA NTRS1984

Estimation of electric fields and current from ground-based magnetometer data

Recent advances in numerical algorithms for estimating ionospheric electric fields and currents from groundbased magnetometer data are reviewed and evaluated. Tests of the adequacy of one such algorithm in reproducing large-scale patterns of electrodynamic parameters in the high-latitude ionosphere have yielded generally positive results, at least for some simple cases. Some encouraging advances in producing realistic conductivity models, which are a critical input, are pointed out. When the algorithms are applied to extensive data sets, such as the ones from meridian chain magnetometer networks during the IMS, together with refined conductivity models, unique information on instantaneous electric field and current patterns can be obtained. Examples of electric potentials, ionospheric currents, field-aligned currents, and Joule heating distributions derived from ground magnetic data are presented. Possible directions for future improvements are also pointed out.

Kamide, Y.↗
NASA NTRS1993

Performance of the engineering analysis and data system 2 common file system

The Engineering Analysis and Data System (EADS) was used from April 1986 to July 1993 to support large scale scientific and engineering computation (e.g. computational fluid dynamics) at Marshall Space Flight Center. The need for an updated system resulted in a RFP in June 1991, after which a contract was awarded to Cray Grumman. EADS II was installed in February 1993, and by July 1993 most users were migrated. EADS II is a network of heterogeneous computer systems supporting scientific and engineering applications. The Common File System (CFS) is a key component of this system. The CFS provides a seamless, integrated environment to the users of EADS II including both disk and tape storage. UniTree software is used to implement this hierarchical storage management system. The performance of the CFS suffered during the early months of the production system. Several of the performance problems were traced to software bugs which have been corrected. Other problems were associated with hardware. However, the use of NFS in UniTree UCFM software limits the performance of the system. The performance issues related to the CFS have led to a need to develop a greater understanding of the CFS organization. This paper will first describe the EADS II with emphasis on the CFS. Then, a discussion of mass storage systems will be presented, and methods of measuring the performance of the Common File System will be outlined. Finally, areas for further study will be identified and conclusions will be drawn.

Debrunner, Linda S.↗
NASA NTRS2013

The Utility of the Real-Time NASA Land Information System Data for Drought Monitoring Applications

Measurements of soil moisture are a crucial component for the proper monitoring of drought conditions. The large spatial variability of soil moisture complicates the problem. Unfortunately, in situ soil moisture observing networks typically consist of sparse point observations, and conventional numerical model analyses of soil moisture used to diagnose drought are of coarse spatial resolution. Decision support systems such as the U.S. Drought Monitor contain drought impact resolution on sub-county scales, which may not be supported by the existing soil moisture networks or analyses. The NASA Land Information System, which is run with 3 km grid spacing over the eastern United States, has demonstrated utility for monitoring soil moisture. Some of the more useful output fields from the Land Information System are volumetric soil moisture in the 0-10 cm and 40-100 cm layers, column-integrated relative soil moisture, and the real-time green vegetation fraction derived from MODIS (Moderate Resolution Imaging Spectroradiometer) swath data that are run within the Land Information System in place of the monthly climatological vegetation fraction. While these and other variables have primarily been used in local weather models and other operational forecasting applications at National Weather Service offices, the use of the Land Information System for drought monitoring has demonstrated utility for feedback to the Drought Monitor. Output from the Land Information System is currently being used at NWS Huntsville to assess soil moisture, and to provide input to the Drought Monitor. Since feedback to the Drought Monitor takes place on a weekly basis, weekly difference plots of column-integrated relative soil moisture are being produced by the NASA Short-term Prediction Research and Transition Center and analyzed to facilitate the process. In addition to the Drought Monitor, these data are used to assess drought conditions for monthly feedback to the Alabama Drought Monitoring and Impact Group and the Tennessee Drought Task Force, which are comprised of federal, state, and local agencies and other water resources professionals.

White, Kristopher D.↗
NASA NTRSDate not supplied

Foundation AI Models for Science

Foundation Models (FM) are AI models that are designed to replace a task or an application specific model. These FM can be applied to many different downstream applications. These FM are trained using self supervised techniques and can be built on any type of sequence data. The use of self supervised learning removes the hurdle for developing a large labeled dataset for training. Most FM use transformer architecture utilizes the notion of self attention which allows the network to model the influence of distant data points to each other both in space and time. The FM models exhibit emergent properties that are induced from the data. FM can be an important tool for science. The scale of these models results in better performance for different downstream applications and these applications show better accuracy over models built from scratch. FM drastically reduces the cost of entry to build different downstream applications both in time and effort. FM for selected science datasets such as optical satellite data, can accelerate applications ranging from data quality monitoring, feature detection and prediction. FM can make it easier to infuse AI into scientific research by removing the training data bottleneck and increasing the use of science data.

Manil Maskey↗
NASA NTRS1984

Photometric Studies of Heat Flow at the Photosphere

Continuum photometry is carried out and the results of comparing these observations with models of photospheric heat flow are described. The main results are: (1) a possible detection of weak bright rings around some spot penumbrae; (2) no evidence is found for large scale photospheric brightness inhomogeneities exceeding 2-3 K which places tighter constraints on models of global scale convection; (3) supergranular scale continuum structures observed across the photosphere appear mainly due to random clumping of granules; (4) the one case observed of a sunspot emergence shows no thermal shadow exceeding 1.5 K rms one day prior to umbra appearance; (5) network and faculae are found to show a small excess brightness even at mu = 1, so detection of faculae at mu = 1 by differential photometry indicates a gentler temperature gradient near tau = 1 in the facular (relative to cell) atmosphere; (6) the limb darkening study shows no significant global variations to within 0.1% rms.

Foukal, P.↗
NASA NTRS1993

On-board B-ISDN fast packet switching architectures. Phase 2: Development. Proof-of-concept architecture definition report

For the next-generation packet switched communications satellite system with onboard processing and spot-beam operation, a reliable onboard fast packet switch is essential to route packets from different uplink beams to different downlink beams. The rapid emergence of point-to-point services such as video distribution, and the large demand for video conference, distributed data processing, and network management makes the multicast function essential to a fast packet switch (FPS). The satellite's inherent broadcast features gives the satellite network an advantage over the terrestrial network in providing multicast services. This report evaluates alternate multicast FPS architectures for onboard baseband switching applications and selects a candidate for subsequent breadboard development. Architecture evaluation and selection will be based on the study performed in phase 1, 'Onboard B-ISDN Fast Packet Switching Architectures', and other switch architectures which have become commercially available as large scale integration (LSI) devices.

Shyy, Dong-Jye↗
NASA NTRS2003

Block QCA Fault-Tolerant Logic Gates

Suitably patterned arrays (blocks) of quantum-dot cellular automata (QCA) have been proposed as fault-tolerant universal logic gates. These block QCA gates could be used to realize the potential of QCA for further miniaturization, reduction of power consumption, increase in switching speed, and increased degree of integration of very-large-scale integrated (VLSI) electronic circuits. The limitations of conventional VLSI circuitry, the basic principle of operation of QCA, and the potential advantages of QCA-based VLSI circuitry were described in several NASA Tech Briefs articles, namely Implementing Permutation Matrices by Use of Quantum Dots (NPO-20801), Vol. 25, No. 10 (October 2001), page 42; Compact Interconnection Networks Based on Quantum Dots (NPO-20855) Vol. 27, No. 1 (January 2003), page 32; Bit-Serial Adder Based on Quantum Dots (NPO-20869), Vol. 27, No. 1 (January 2003), page 35; and Hybrid VLSI/QCA Architecture for Computing FFTs (NPO-20923), which follows this article. To recapitulate the principle of operation (greatly oversimplified because of the limitation on space available for this article): A quantum-dot cellular automata contains four quantum dots positioned at or between the corners of a square cell. The cell contains two extra mobile electrons that can tunnel (in the quantummechanical sense) between neighboring dots within the cell. The Coulomb repulsion between the two electrons tends to make them occupy antipodal dots in the cell. For an isolated cell, there are two energetically equivalent arrangements (denoted polarization states) of the extra electrons. The cell polarization is used to encode binary information. Because the polarization of a nonisolated cell depends on Coulomb-repulsion interactions with neighboring cells, universal logic gates and binary wires could be constructed, in principle, by arraying QCA of suitable design in suitable patterns. Heretofore, researchers have recognized two major obstacles to realization of QCA-based logic gates: One is the need for (and the difficulty of attaining) operation of QCA circuitry at room temperature or, for that matter, at any temperature above a few Kelvins. It has been theorized that room-temperature operation could be made possible by constructing QCA as molecular-scale devices. However, in approaching the lower limit of miniaturization at the molecular level, it becomes increasingly imperative to overcome the second major obstacle, which is the need for (and the difficulty of attaining) high precision in the alignments of adjacent QCA in order to ensure the correct interactions among the quantum dots.

Firjany, Amir↗
NASA NTRSDate not supplied

Overview of JAXA and NASA Collaboration on Manned and Unmanned Aircraft Operations Integration in Disaster Response

Natural disasters have increased in frequency and intensity. With that increase has come an increased focus on improving disaster response efforts. As part of this focus, the Japan Aerospace Exploration Agency (JAXA) and the National Aeronautics and Space Administration (NASA) have been in collaboration since 2016 to explore improved airspace management for disaster response through the integration of manned aircraft and small Unmanned Aircraft Systems (UAS). The approach to this integration has been through leveraging JAXA’s Disaster Relief Aircraft Information Sharing Network (D-NET) system for the coordinated management of manned aircraft assets combined with NASA’S UAS Traffic Management (UTM) system for the management of UAS assets. To drive the innovation in improved response, JAXA and NASA have successfully connected respective systems and conducted a series of live flight tests first as part of a large-scale disaster drill and later in dedicated research flights. In each case, the D-NET and UTM systems were connected and exchanged data in real-time, which supported the planning and tracking of manned and unmanned operations. Through these test events, a number of key findings were derived through data analysis and stakeholder interviews with respect to the improvements offered by the integrated systems as well as key considerations for situation awareness of pilots regarding other operations in the airspace and flight path management.

disaster response↗
NASA NTRSDate not supplied

Scaling Electric Machines to a Megawatt and Material Options

Megawatt (MW) electric aircraft propulsion (EAP) is seen as a significant contributor toward achieving the goals set forth by the Sustainable Flight National Partnership. A large part of enabling MW EAP is developing specific-power-dense electric machines. As specific-power-dense electric machines are scaled up from kW to MW power levels, the thermal stresses on the machines increase in both magnitude and performance-affecting characteristics. This is particularly true for the stators of these machines. Analysis via thermal resistance network modeling and multiscale modeling reveals that increasing amounts of heat will be trapped in the stator windings as the power levels increase. The challenges this presents can be addressed through material advancements whereby materials gain multifunctionality. Specifically, the electrical insulation and potting materials, along with the electrical conductor, that compose the stator slot must work together (gain multifunctionality) to relieve the increased thermal stress. Materials research at the NASA Glenn Research Center points to some useful solutions in this trade space.

Electric Machine↗