Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “iron based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Performance and Analysis of Perfluoropolyalkyl Ether Grease Used on Space Shuttle Actuators--A Case Study

Actuators used on the United States space shuttle fleet are lubricated with unspecified amounts of Braycote 601 (Castrol Braycote) grease consisting of a perfluoropolyalkyl ether (PFPAE) base oil thickened with a polytetrafluoroethylene (PTFE) filler. Each shuttle has four body flap actuators (BFAs) (two on each wing) on a common segmented shaft and four rudder speed brake (RSB) actuators. The actuators were designed to operate for 10 years and 100 flights without periodic relubrication. Visible inspection of two partially disassembled RSB actuators in continuous use for 19 years raised concerns over possible grease degradation due to discoloration of the grease on several places on the surfaces of the gears. Inspection revealed fretting, micropitting, wear and corrosion of the bearings and gears. A small amount of oil dripped from the disassembled actuators. Whereas new grease is beige in appearance, the discolored grease consisted of both grey and reddish colors. Grease samples taken from the actuators together with representative off-the-shelf new and unused grease samples were analyzed by gravimetry for oil content; by inductively coupled plasma spectroscopy (ICP) for metals content; Fourier transform infrared (FTIR) spectroscopy for base oil decomposition; and by size exclusion chromatography (SEC) for determination of the molecular weight distributions of the grease oil. The Braycote 601 grease was stable after 19 years of continuous use in the sealed RSB actuators and was fit for its intended purpose. There were no significant chemical differences between the used grease samples and new and unused samples. Base oil separation was not significant within the sealed actuators. No corrosive effect in the form of iron fluoride was detected. The grey color of grease samples was due to metallic iron. The red color was due to oxidation of the metallic wear particles from the gears and the bearings comprising the actuators.

Morales, Wilfredo↗
NASA NTRS2008

Sulfur and Iron Speciation in Gas-rich Impact-melt Glasses from Basaltic Shergottites Determined by Microxanes

Sulfur is abundantly present as sulfate near Martian surface based on chemical and mineralogical investigations on soils and rocks in Viking, Pathfinder and MER missions. Jarosite is identified by Mossbauer studies on rocks at Meridian and Gusev, whereas MgSO4 is deduced from MgO - SO3 correlations in Pathfinder MER and Viking soils. Other sulfate minerals such as gypsum and alunogen/ S-rich aluminosilicates and halides are detected only in martian meteorites such as shergottites and nakhlites using SEM/FE-SEM and EMPA techniques. Because sulfur has the capacity to occur in multiple valence states, determination of sulfur speciation (sulfide/ sulfate) in secondary mineral assemblages in soils and rocks near Mars surface may help us understand whether the fluid-rock interactions occurred under oxidizing or reducing conditions. To understand the implications of these observations for the formation of the Gas-rich Impact-melt (GRIM) glasses, we determined the oxidation state of Fe in the GRIM glasses using Fe K micro-XANES techniques.

Sutton, S. R.↗
NASA NTRS1969

Superior analyses of iron meteorites.

Iron meteorites analysis for Ni, Co, P, C, S and Cu elements by milling technique, noting superiority degree based on Co-Ni correlation

Lewis, C. F.↗
NASA NTRS1973

On the primordial condensation and accretion environment and the remanent magnetization of meteorites

In the context of various models for the early evolution of a solar nebula, the possible roles assigned to ambient magnetic fields and the paleointensities required to establish the stable natural remanent magnetization observed in meteorites, are discussed. It is suggested that the record of paleofields present during condensation, growth, and accumulation of grains is likely to have been preserved as chemical or thermochemical remanence in unaltered meteoritic material. Fine particle theories appear adequate for treating meteoritic remanence, if models based on corresponding types of permanent magnet materials, e.g., powder ferrites for chondrites and diffusion hardened alloys for iron meteorites, are adopted.

Brecher, A.↗
NASA NTRS1987

Implications of isotopic signatures of noble gases for the origin and evolution of terrestrial atmospheres

It is contented that the initial quantities of noble gases present in planetesimals were controlled by the sizes and masses of the planets, and fit with a model of successive accretion. The successive accretion model proposed for the origin of terrestrial planets is based upon: (1) the sequence of zones of condensation of solar nebula, (2) the condensation sequence of minerals, iron and nickel in different P-T regimes of the solar nebula, and (3) the sequence in the nucleation of iron cores of the terrestrial planets.

Rao, A. S. P.↗
NASA NTRS1991

Abundance variations in solar active regions

The diversity in the published values of coronal abundances is unsettling, especially as the range of results seems to be beyond the quoted uncertainties. Measurements of the relative abundance of iron and neon derived from soft X-ray spectra of active regions are presented. From a data base of over 200 spectra taken by the Solar Maximum Mission Flat Crystal Spectrometer, it is found that the relative abundance can vary by as much as a factor of about 7 and can change on timescales of less than 1 h.

Strong, K. T.↗
NASA NTRS1994

Troilite formation kinetics and growth mechanism in the solar nebula

Troilite formation via the reaction Fe(s) + H2S(g) + H2(g) is the major mechanism for S retention in grains in the solar nebula. Thermodynamic calculations predict that troilite condenses from a solar composition gas. We present experimental results on the kinetics and growth of troilite crystals on Fe metal at temperature (450-650 C) and composition (50-1000 ppm H2S in H2) conditions similar to those in the solar nebula. The fraction of Fe reacted (based on gravimetric data) is plotted at 450, 505, 575, and 650 C. The thickness change of unreacted iron (measured by optical microscopy) is plotted at 575 and 650 C vs. time. the weight change per unit area varies as the square root of time at the lower temperatures and varies linearly with time at the highest temperature. The growth behavior along the lower isotherms is due to diffusion. This behavior suggests sulfide diffusion to the metal-sulfide interface and suggests Fe(2+) diffusion to the sulfide-gas interface. The reaction along the highest isotherm appears to be interface controlled. The formation of troilite crystals is a rapid process forming measurable layers in a few hours. The crystalgrowth is complicated. Initially there are intergrowths of troilite into the pure Fe metal. As the reaction progresses two distinct layers of troilite crystals form. One is in contact with the Fe metal and consists of small randomly oriented crystals with pore space between them. The outermost layer contains large crystals that are all oriented in the same direction. The intergrowth layer is much smaller at 650 C than at 575 C. This suggest that FeS nucleation is inhibited at the higher temperature, accounting for the initially slower reaction rate. Once nucleated, the reaction kinetics are apparently controlled by the growth of the crystals at the interface.

Lauretta, D. S.↗
NASA NTRS1997

Numerical simulations of infrared emitting regions

The development of CLOUDY, a large scale code designed to compute the spectrum of gas into photoionization or collisional balance, is presented. The major upgrading of CLOUDY are given together with a discussion of the remaining problems and the future plans for improving the atomic data base. The completeness of the line list included in CLOUDY, the results of the Opacity project and the Iron project are discussed.

vanHoof, P. A. M.↗
NASA NTRSDate not supplied

Exploration of Particle Size Engineering and Microencapsulation Technologies for Multifunctional Applications

There is a critical need for high performance materials for functional and space-based applications, including tires for exploratory rovers and external structures for landing vehicles. Novel ternary borides, such as iron aluminum boride (Fe2AlB2) and molybdenum aluminum boride (MoAlB), have emerged as potential materials for such application owing to their hardness, mechanical behavior and oxidation resistance. In this poster presentation, we will present different methods of fabricating these particles and engineering them for additive manufacturing and other related manufacturing practices. As an integral component of this study, we will demonstrate technologies to (a) synthesize these particles and (b) microencapsulate these particles with bioplastics like polylactic acid (PLA). The resulting particles will be evaluated for their processability as coatings on hydroxyapatite and Inconel particles using microstructural and flowability studies. It is expected that these particles can be used for 3D printing.

ceramics↗
NASA NTRS2006

Iron-Tolerant Cyanobacteria for Human Habitation beyond Earth

In light of the President's Moon/Mars initiative, lunar exploration has once again become a priority for NASA. In order to establish permanent bases on the Moon and proceed with human exploration of Mars, two key problems will be addressed: first, the production of O2 and second, the production of methane (CH4). While O2 is required for life support systems (LSS), both liquid O2 and CH4 are needed as an oxidizer and a propellant, respectively for the Lunar Surface Access Module (LSAM) and the Crew Exploration Vehicle (CEV). Unlike previous propulsion systems, the new CEV will use liquid oxygen (LO2) as an oxidizer and liquid methane (LCH4) as a propellant. Existing technology (e.g. hydrogen reduction) for the production of liquid oxygen from lunar regolith is very energy intensive and requires high temperature reactors. We propose an alternative approach using iron-tolerant cyanobacteria. We have found that iron-tolerant cyanobacteria (IT CB) are capable of etching iron-bearing minerals, which may lead to bonds breaking between Fe and O of common lunar mare basalt Feoxides including ilmenite, pseudobrookite, ferropseudobrookite, and armalcolite with the subsequent release of both Fe, Ti and oxygen as by-products. We also propose to use CB biomass for CH4 production as carbon stock and a propellant. Both processes can be accomplished in an energy and cost effective manner because sunlight will be used as an energy source and allows the reactions at ambient temperatures between 10-60 C. Current evaluations include assessing the thermodynamics of such biogenic reactions using a variety of nutrients and atmospheric parameters, as well as assessing the rates and species variation effects of the driving reactions.

Brown, Igor↗
NASA NTRS1985

Multiple muons of conventional and exotic origin in DUMAND

A first summary of results from a theoretical analysis, based on hadron - muon cascade calculations, that yield relative intensities of very high energy multiple muons originating from ultra high energy interactions initiated by primary protons and iron nuclei in the atmosphere, under consideration of normal as well as direct and exotic production channels is presented. Lateral density distributions and target diagrams will be presented which show that only very large detectors, such as DUMAND, will be able to record multiple muons of conventional origin reliably. This, however, is a prerequisite for any primary mass determination based on multiple muon data.

Grieder, K. F.↗
NASA NTRS1976

Apollo experiment S-217 IR/radar study of Apollo data

An experiment using Earth based remote sensing radar, infrared eclipse, and color difference data to deduce surface properties not visible in Apollo photography is reported. The Earth based data provided information on the small scale (centimeter sized) blockiness and on the surface chemical composition (titanium and iron contents) of the lunar surface. These deduced surface properties complemented the new Apollo photography, leading to refined geologic interpretations of the lunar surface.

Thompson, T. W.↗
NASA NTRS1977

Mercury

Information about Mercury obtained with the Mariner 10 spacecraft is summarized together with results of theoretical studies and ground-based observations. It is shown that Mercury is very likely a differentiated body, probably contains a large earthlike iron-rich core, and displays a surface similar to the moon's, which suggests a similar evolutionary history. The size and mass of Mercury are discussed along with its orbit, rotation, atmosphere, magnetic field, and magnetosphere. Surface features of Mercury are described on the basis of Mariner 10 pictures, with detailed attention given to the major physiographic provinces, the structure of the Caloris basin, the tectonic framework of the planet, crater morphology, the planet's optical and thermal properties, and cartography. The composition and structure of the interior are examined, and the thermal history of Mercury is considered. The planet's geologic history is divided into five stages or epochs: (1) accretion and differentiation, (2) terminal heavy bombardment, (3) Caloris basin formation, (4) basin flooding, and (5) postfilling lighter bombardment.

Gault, D. E.↗
NASA NTRS2006

Nutrition in Space: Benefits on Earth

History has often proven the criticality for adequate nutrition to ensure expedition success. Space exploration will be no different, with the exception of the certainty that food will not be found along the journey. Ensuring the health and safety of astronauts is critical and nutrition will serve several functions to that end. Nutritional assessment of International Space Station (ISS) crewmembers not only serves to evaluate the nutritional health of individuals, but also allows a better understanding of how space flight affects nutritional requirements, and how nutrition can serve in mitigating the negative effects of weightlessness on the human. Available data suggest that the nutritional status of astronauts is compromised during and after flight. Inadequate dietary intake and subsequent weight loss are often considered hallmarks of space flight, although exceptions to this do exist, and provide hope. However, beyond energy intake, specific nutrient issues also exist. Several vitamins, including D and folate, are affected in space travelers. Hematological and antioxidant defense systems are impacted, with increased iron storage, and increased markers of oxidative damage. Bone loss during space flight remains a critical challenge. Ground-based studies have proven that nutrition is a potent modulator of the bone response to simulated weightlessness. Protein and sodium are two nutrients which tend to exacerbate bone resorption and loss, likely mediated through acid base balance. Defining nutrient requirements, and being able to provide and maintain those nutrients on exploration missions, will be critical for maintaining crew member health. Both flight and ground-based research provide a unique situation, one where healthy individuals are put in a unique and challenging environment. A full understanding of the role of nutrition during space flight will not only enhance crew health and safety during flight, but will also expand our understanding of the role of nutrition in health of those remaining on Earth.

Smith, Scott M.↗
NASA NTRS2019

NASA GeneLab Platform Utilized for Space Radiation Dosimetry Biological Response Compared to Radiation Ground Studies

Ionizing radiation from Galactic Cosmic Rays (GCR) is one of the major risk factors factor that will impact health of astronauts on extended missions outside the protective effects of the Earth's magnetic field. Currently there are gaps in our knowledge of the health risks associated with chronic low dose, low dose rate ionizing radiation, specifically ions associated with high (H) atomic number (Z) and energy (E). The NASA GeneLab project (genelab.nasa.gov) aims to provide a detailed library of Omics datasets associated with biological samples exposed to HZE. The GeneLab Data System (GLDS) includes datasets from both spaceflight and ground-based studies, a majority of which involved exposure to ionizing radiation. Recently GeneLab has also assessed radiation dosimetry data with omics datasets associated with samples flown to the International Space Station (ISS). The combination of the detailed information on radiation exposure for ground-based studies and curated dosimetry information for spaceflight experiments allows GeneLab to be the first comprehensive Omics database for space related research from which an investigator can generate hypotheses to direct future experiments utilizing both ground and space biological radiation data. We demonstrate the usefulness of these datasets by analyzing multiple GeneLab datasets associated with both radiation ground-based studies and spaceflight studies. The radiation ground based studies we analyzed includes both in vivo and in vitro work with a range ions from protons to iron particles with doses from 0.1Gy to 2Gy. These datasets were compared to both in vivo and in vitro datasets from samples flown to the ISS and on shorter shuttle missions with total doses of 0.1 mGy to 30 mGys. From this analysis we were able to associate distinct biological signatures associating specific ions to specific biological response to radiation exposure in space. For example, we discovered radiation biological response related to cardiovascular effects from proton ground studies are the dominating response for samples related to cardiovascular effects on the ISS. With this work we will provide a summary of how different ions will impact different biological response in space and how this can be used in future studies to assess optimal ground experiments to simulate space radiation.

Beheshti, Afshin↗
NASA NTRS1991

Mechanisms of ilmenite reduction and their impact on the design of effective reactor systems

One of the first activities at a lunar base could be oxygen recovery from ilmenite (FeTiO3). Oxygen produced from lunar soils could be used to fuel transportation vehicles operating in near-earth space. The first step in developing a suitable reactor system for lunar operation is to determine the mechanisms and rates of oxygen removal from ilmenite. In-situ gravimetric measurements and microscopic examinations were used to determine the hydrogen reduction mechanisms of synthetic ilmenite discs between 823 to 1353 K. A shrinking core reaction model, modified to account for the growth of an iron film on the surface of discs, was capable of predicting experimentally observed conversion-time relationships. The observed reduction mechanism, kinetic rates, and associated activation energy established a base line from which comparisons could be made to improve oxygen yield and removal rates. One proposed technique to improve the rate and extent of oxygen removal was to preoxidize ilmenite. Preoxidation is commonly used during the reduction of ilmenite ores in the iron industry and has been employed for many years to lower operating temperatures and increase reduction rates. This technology could prove beneficial for oxygen production facilities on the Moon as less massive reactor vessels and/or less energy could be associated with a process including preoxidation. X ray diffraction and energy dispersive spectroscopy were utilized to follow the progression of ilmenite oxidation at 1123 and 1140 K and the reduction of pseudobrookite (Fe2TiO5) at 873 and 973 K. Structures formed during the progress of oxidation were related to the system's phase diagrams. Results indicated that after initially producing ilmenite-hematite solutions and rutile (TiO2), pseudobrookite was the end product of oxidation at all temperatures examined (1049 to 1273 K). Initial results from the reduction of pseudobrookite indicate a series of phases are produced including ferropseudobrookite (FeTi2O5), ulvospinel (Fe2TiO4), and ilmenite. Rates of pseudobrookite reduction were typically 50 to 200 times that of ilmenite.

Briggs, R. A.↗
NASA NTRS2008

Understanding Black Hole X-ray Binaries: The Case of Cygnus X-1

Black Hole X-ray Binaries are known to display distinct emission states that differ in their X-ray spectra, their X-ray timing properties (on times scales less than 1 s) and their radio emission. In recent years monitoring observations, specially with NASA's Rossi X-ray Timing Explorer (RXTE), have provided us with detailed empirical modeling of the phenomenology of the different states as well as a unification scheme of the long term evolution of black holes, transient and persistent, in terms of these states. Observations of the persistent High Mass X-ray Binary (HMXB) Cygnus X-l have been at the forefront of learning about black hole states since its optical identification through a state transition in 1973. In this talk I will present in depth studies of several different aspects of the accretion process in this system. The main data base for these studies is an ongoing RXTE and Ryle radio telescope bi-weekly monitoring campaign that started in 1997. I will discuss high-resolution timing results, especially power spectra, which first gave rise to the Lorentzian description now widely used for black hole and neutron star binaries, and time lags, which we found to be especially well suited to identify state transitions. The evolution of spectral, timing, and radio parameters over years will be shown, including the rms-flux relation and the observation of a clearly correlated radio/x-ray flare. We also observed Cygnus X-1 with INTEGRAL, which allowed us to extend timing and spectral studies to higher energies, with XMM, which provided strong constraints on the parameters of the 6.4 keV iron fluorescence line, and with Chandra, which provided the most in depth study to date of the stellar wind in this system. Models based on the physical conditions in the accretion region are still mainly concentrated on the one or other of the observational areas but they are expanding: as an example I will review results from a jet model for the quantitative description of the radio through X-ray spectra. I will conclude with an outlook on a truly multi-instrument observing campaign of Cygnus X-1 that was performed in 2008 April in order to better constrain the jet models mentioned above (and provide a unique data set for cross-calibration).

Pottschmidt, Katja↗