Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intervals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Atropine unmasks bed-rest effect - A spectral analysis of cardiac interbeat intervals

Heart rate spectral data obtained for 10 male subjects between 35-49 years following orthostatic tolerance testing with lower body negative pressure prebed rest and after 7-10 days of bed rest, while on placebo and after intravenous atropine are analyzed. Comparison of the spectral atropine rms for subjects prebed rest and after bed rest reveal a decrease from 63 + or - 24 ms to 40 + or - 23 ms. It is observed that heart rate interval variability for subjects after bed rest and with atropine is reduced; the heart rate at bed rest with atropine is increased from 70.4 + or - 12.4 beats/min prebed rest to 83.7 + or - 18.9 beats/min; and the exercise tolerance time for subjects in the atropine prebed-rest phase (658 + or - 352 s) is higher than the bed-rest phase (505 + or - 252 s). It is noted that bed rest impairs the cardiovascular capacity to adaptively modulate physiological responses, atropine exposes bed-rest deconditioning effects, and spectral analysis is useful for studying the effects of bed-rest deconditioning on cardiac dynamics.

Goldberger, Ary L.↗

Interval Counter Measures Stability Of Frequency

Propagation of errors and effects of dead time suppressed. System includes precise timing-pulse generator with interval counter and suitably programmed computer determines relative stability or instability of frequency of two signals differing in frequency by about 1 Hz. Designed for use in frequency-standards laboratory.

Greenhall, C. A.↗

Probable detection of solar neutrons by ground-level neutron monitors during STIP interval 16

The third solar neutron event detected by Earth-orbiting spacecraft was observed during STIP Interval XVI. The solar flare beginning at 2356 UT on 24 April l984 produced a variety of emissions including gamma rays and solar neutrons. The neutrons were observed by the SMM satellite and the neutron-decay protons were observed on the ISEE-3 spacecraft. Between 0000 and 0010 UT on 25 April an increase of 0.7 and 1.7 percent was recorded by neutron monitors at Tokyo (Itabashi) and Morioka, Japan. These stations were located about 42 degrees from the sub-solar point, and consequently, these is approximately 1400 grams of atmosphere between the incident neutrons at the top of the atmosphere and their detection on the Earth's surface. Nevertheless, the time coincidence of a small increase in the total counting rate of two independent neutron monitors indicates the presence of solar neutrons with energies greater than 400 MeV at the top of the Earth's atmosphere. The small increases in the counting rate emphasize the difficulty in identifying similar events using historical neutron monitor data.

Shea, M. A.↗

An overview of STIP interval 18: September 1985, the G-Z encounter

The primary period of interest during September 1985 is the few days surrounding the ICE encounter with comet Giacobini-Zinner(G-Z) which occurred at 1102 UT on 11 September. To place into perspective the actual in situ observations measured during the comet encounter it is necessary to understand the prevailing solar and interplanetary conditions. Starting two solar rotations prior to and extending through the rotation after the encounter the interplanetary stream structure was very uniform, similar to the 1973-4 long-lived structure. Prior to the arrival of the corotating high-speed stream at 5 UT on 11 September, ICE was already measuring the effects of G-Z on the surrounding interplanetary medium. An overview of available solar, interplanetary, and ICE data for the cometary interval is presented.

Zwickl, R. D.↗

An account of a flare related shock event recorded by the energetic particle detector EPONA of the Giotto spacecraft during September 1985 (STIP interval 18)

The Energetic Particle Detector EPONA flown on the Giotto Mission to Halley's Comet was designed to measure electrons, protons, and heavier ions (E greater that 20 keV) in the Comet Halley environment and during the Cruise Phase of the mission (EPONA switch on: 22 August 1985 - Halley encounter: 13 March 1986). In September 1985 (STIP Interval XVIII) a well defined shock event was recorded at EPONA in association with a sequence of solar flares and a preliminary account of this event is presented.

Mckennalawlor, Susan M. P.↗

Iridium abundance maxima in the Upper Cenomanian extinction interval

Two iridium abundance peaks, both 0.11 ppb (whole-rock basis) over a local background of 0.017 ppb, have been found in Middle Cretaceous marine rocks near Pueblo, Colorado. They occur just below the 92-million-year-old Cenomanian-Turonian (C-T) stage boundary. No other peaks were found in 45 meters of strata (about 2.5 million years of deposition) above and below the boundary interval. The broad lower peak straddles the first in a series of extinctions of benthic and nektonic macrobiota which comprise the C-T extinction event. The sharp upper peak occurs stratigraphically about 1.2 meters above the lower peak. The excess Ir might be from meteoroid impacts.

Orth, C. J.↗

Boundary implications for frequency response of interval FIR filters

It is shown that vertex implication results in parameter space apply to interval trigonometric polynomials, which characterize the frequency response of a finite impulse response (FIR) digital filter. A weak result and a strong result are given, and the conclusions are illustrated by examples.

Bose, N. K.↗

A method for classification of multisource data using interval-valued probabilities and its application to HIRIS data

A method of classifying multisource data in remote sensing is presented. The proposed method considers each data source as an information source providing a body of evidence, represents statistical evidence by interval-valued probabilities, and uses Dempster's rule to integrate information based on multiple data source. The method is applied to the problems of ground-cover classification of multispectral data combined with digital terrain data such as elevation, slope, and aspect. Then this method is applied to simulated 201-band High Resolution Imaging Spectrometer (HIRIS) data by dividing the dimensionally huge data source into smaller and more manageable pieces based on the global statistical correlation information. It produces higher classification accuracy than the Maximum Likelihood (ML) classification method when the Hughes phenomenon is apparent.

Kim, H.↗

Reasoning about real-time systems with temporal interval logic constraints on multi-state automata

Models of real-time systems using a single paradigm often turn out to be inadequate, whether the paradigm is based on states, rules, event sequences, or logic. A model-based approach to reasoning about real-time systems is presented in which a temporal interval logic called TIL is employed to define constraints on a new type of high level automata. The combination, called hierarchical multi-state (HMS) machines, can be used to model formally a real-time system, a dynamic set of requirements, the environment, heuristic knowledge about planning-related problem solving, and the computational states of the reasoning mechanism. In this framework, mathematical techniques were developed for: (1) proving the correctness of a representation; (2) planning of concurrent tasks to achieve goals; and (3) scheduling of plans to satisfy complex temporal constraints. HMS machines allow reasoning about a real-time system from a model of how truth arises instead of merely depending of what is true in a system.

Gabrielian, Armen↗

USSR national time unit keeping over long interval using an ensemble of H-masers

The U.S.S.R. State Time and Frequency Service (STFS) is discussed. The STFS is responsible for time and frequency measurement unification both in the field of atomic, TA(SU) and UTC(SU) and universal time UT1(SU) over the whole territory of the U.S.S.R. The U.S.S.R. national time unit keeping over long interval using an ensemble of H-masers is also discussed.

Koshelyaevsky, N. B.↗

Lightning electromagnetic radiation field spectra in the interval from 0.2 to 20 MHz

New Fourier transforms of wideband time-domain electric fields (E) produced by lightning (recorded at the Kennedy Space Center during the summers of 1985 and 1987) were recorded in such a way that several different events in each lightning flash could be captured. Average HF spectral amplitudes for first return strokes, stepped-leader steps, and 'characteristic pulses' are given for significantly more events, at closer ranges, and with better spectral resolution than in previous literature reports. The method of recording gives less bias toward the first large event in the flash and thus yields a large sample of a wide variety of lightning processes. As a result, reliable composite spectral amplitudes are obtained for a number of different processes in cloud-to-ground lightning over the frequency interval from 0.2 to 20 MHz.

Willett, J. C.↗

Combining multispectral and ancillary data in remote sensing using interval-valued probabilities

This paper presents a method for classifying multisource data in remote sensing and geographic information systems using interval-valued probabilities. In this method, each data source is considered as an information source which provides a body of statistical evidence. In order to integrate information obtained from multiple data sources, the method adopts Dempster's rule for combining multiple bodies of evidence. Preliminary experiments have been undertaken to illustrate the use of the method in a supervised ground-cover classification on multispectral data combined with digital elevation data. They demonstrate the ability of the method in capturing information provided by inexact and incomplete evidence when there are not enough training samples to estimate statistical parameters.

Kim, H.↗

A method for classification of multisource data using interval-valued probabilities and its application to HIRIS data

A method of classifying multisource data in remote sensing is presented. The proposed method considers each data source as an information source providing a body of evidence, represents statistical evidence by interval-valued probabilities, and uses Dempster's rule to integrate information based on multiple data sources. The method is applied to the problems of ground-cover classification of multispectral data combined with digital terrain data such as elevation, slope, and aspect. Then this method is applied to simulated 201-band High Resolution Imaging Spectrometer (HIRIS) data by dividing the dimensionally huge data source into smaller and more manageable pieces based on the global statistical correlation information. It produces higher classification accuracy than the Maximum Likelihood (ML) classification method when the Hughes phenomenon is apparent.

Kim, H.↗

Efficient Computation Of Confidence Intervals Of Parameters

Study focuses on obtaining efficient algorithm for estimation of confidence intervals of ML estimates. Four algorithms selected to solve associated constrained optimization problem. Hybrid algorithms, following search and gradient approaches, prove best.

Murphy, Patrick C.↗

Proceedings of the 23rd Annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting

A compilation of technical papers, from the 23rd annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting, is presented. Papers were given in the following categories: (1) developments in rubidium, cesium, and hydrogen-based frequency standards, and in cryogenic and trapped-ion technology; (2) international and transnational applications of PTTI technology with emphasis on satellite laser tracking networks, GLONASS timing, comparison of national time scales and international communications; (3) applications of PTTI technology to the telecommunications, power distribution, platform positioning, and geophysical survey industries; (4) applications of PTTI technology to evolving military communications and navigation systems; and (5) dissemination of precise time and frequency by means of GPS, GLONASS, MILSTAR, Loran, and synchronous communications satellites.

Richard L. Sydnor↗

Precise time and time interval applications to electric power systems

There are many applications of precise time and time interval (frequency) in operating modern electric power systems. Many generators and customer loads are operated in parallel. The reliable transfer of electrical power to the consumer partly depends on measuring power system frequency consistently in many locations. The internal oscillators in the widely dispersed frequency measuring units must be syntonized. Elaborate protection and control systems guard the high voltage equipment from short and open circuits. For the highest reliability of electric service, engineers need to study all control system operations. Precise timekeeping networks aid in the analysis of power system operations by synchronizing the clocks on recording instruments. Utility engineers want to reproduce events that caused loss of service to customers. Precise timekeeping networks can synchronize protective relay test-sets. For dependable electrical service, all generators and large motors must remain close to speed synchronism. The stable response of a power system to perturbations is critical to continuity of electrical service. Research shows that measurement of the power system state vector can aid in the monitoring and control of system stability. If power system operators know that a lightning storm is approaching a critical transmission line or transformer, they can modify operating strategies. Knowledge of the location of a short circuit fault can speed the re-energizing of a transmission line. One fault location technique requires clocks synchronized to one microsecond. Current research seeks to find out if one microsecond timekeeping can aid and improve power system control and operation.

Robert E. Wilson↗

Parametric stability margin for multilinear interval control systems

Recently, a necessary and sufficient condition to determine the robust stability of a multilinear interval control system has been reported as an extension of the well-known Box theorem which deals with the linear affine case. A simple but computationally efficient algorithm, based on the above result, to check the robust stability of such systems is introduced. The method is also extended to find the parametric stability margin of such a system.

Keel, L. H.↗