Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Challenges and Techniques in Measurements of Noise, Cryogenic Noise and Power in Millimeter-Wave and Submillimeter-Wave Amplifiers

We will present the topic of noise measurements, including cryogenic noise measurements, of Monolithic Microwave Integrated Circuit (MMIC) and Sub-Millimeter-Wave Monolithic Microwave Integrated Circuit (S-MMIC) amplifiers, both on-wafer, and interfaced to waveguide modules via coupling probes. We will also present an overview of the state-of-the-art in waveguide probe techniques for packaging amplifier chips, and discuss methods to obtain the lowest loss packaging techniques available to date. Linearity in noise measurements will be discussed, and experimental methods for room temperature and cryogenic noise measurements will be presented. We will also present a discussion of power amplifier measurements for millimeter-wave and submillimeter-wave amplifiers, and the tools and hardware needed for this characterization.

Samoska, Lorene↗
NASA NTRS2022

Flow Testing of Corrugated Metal Flexhoses to Evaluate Flow-Induced Vibration and Stiffness

Corrugated metal flexhoses are used to supply fluid routing where straight rigid pipes cannot meet the design requirements due to vibrations, thermal expansion, or motion. These types of hoses are found in a wide range of applications at KSC (Exploration Ground Systems Program in particular) with various fluid commodities such as fuel, oxidizers, coolant, and cryogenics. However, flexibility of design comes at a price: due to increased levels of turbulence generated by the hose geometry, the necessary supply pressure must increase to achieve the same flow rate. Furthermore, the convolutes of the flexhoses interact with the flow field to generate areas of flow separation which leads to a phenomenon known as vortex shedding. When the frequency of vortex shedding couples with the natural frequency of the hose, this can be detrimental and cause premature failure. There are a limited amount of software that can correctly model the coupled fluid structure interactions(FSI) between the solid and fluid physics. This project aims to develop a computer model that can predict Flow-Induced Vibration (FIV) on flexhoses in one of the atypical configurations found in the State-of-the-Art (SOTA) standard for hoses in an angulated state. Our research seeks to extend the literature and expand NASA’s FIV standard. The computational rigor and resources available in the Apollo Era did not allow for flow coupling between fluids and structure interfaces to evaluate FIV of the flexhose. Our team believes that modern techniques and methods of evaluation should be used to reevaluate and extend the database of FIV and stiffness properties of flexhoses to assess the risk of failure. The core performance criteria is a computer model that is able to predict the FIV frequency within 10%.

Jared F. Congiardo↗
DOE OSTI2021

ARIES/Flatirons Facility - Hydrogen System Capability Buildout

Under the Advanced Research for Integrated Energy Systems (ARIES) initiative, NREL will build out hydrogen system capabilities at the Flatirons campus. The hydrogen infrastructure at the Flatirons campus will include a research-ready megawatt-scale electrolyzer with hydrogen compression and storage, and a fuel cell system. This hardware will support H2@Scale goals by enabling integrated systems R&D (e.g., to demonstrate grid services, energy storage, renewable hydrogen production, and innovative end-use applications). The system will be coupled with the controllable grid interface at the Flatirons campus and will be designed with flexibility to provide a testbed for integrated electrolyzer R&D, hydrogen utilization R&D, and to study the science of scaling for hydrogen energy systems.

39 EE - Hydrogen and Fuel Cell Technologies (EE-3F↗
DOE OSTI2022

An Inner-Loop Control Method for the Filter-less, Voltage Sensor-less, and PLL-less Grid-Following Inverter-Based Resource

This paper presents a novel inner-loop control method for the inverter-based resource (IBR). The innovative concepts include removing the voltage sensors at the point of common coupling (PCC), removing the inverter interface inductance, and removing the traditional phase-locked loop (PLL) circuits. Simulation is conducted to verify the feasibility of the method. Furthermore, the virtual impedance is applied to the control loop to improve the current THD and dynamics. Compared to the traditional control, the proposed one helps offload the system by reducing the bulky inductors and voltage sensors without compromising the control performance.

grid-forming inverter, inner-loop control, filterl↗
DOE OSTI2025

MOOSE Web Server Interface: A Message-based External Interface for Multiphysics Simulations

The Multiphysics Object-Oriented Simulation Environment (MOOSE) framework is a C++ toolkit designed to streamline the development of finite element and finite volume applications. It offers an interface for input-based coupling of these applications to create multiscale, multiphysics models. We introduce a new capability that enables external applications to integrate with MOOSE-based applications in situ via a web server using HTTP requests. An example of this integration is provided, where a MOOSE thermal-fluids solve has a boundary condition that is driven by an external Python application. Additionally, the coupling of the Python-based OpenMC depletion solver with the Cardinal application is demonstrated. A multiphysics model of a pressurized water reactor, incorporating neutronics, heat conduction, thermal-fluids, and depletion, is presented to showcase this new Cardinal capability that is enabled by the MOOSE web server capability.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

MOOSE Web Server Interface: A Message-based External Interface for Multiphysics Simulations

The Multiphysics Object-Oriented Simulation Environment (MOOSE) framework is a C++ toolkit designed to streamline the development of finite element and finite volume applications. It offers an interface for input-based coupling of these applications to create multiscale, multiphysics models. We introduce a new capability that enables external applications to integrate with MOOSE-based applications in situ via a web server using HTTP requests. An example of this integration is provided, where a MOOSE thermal-fluids solve has a boundary condition that is driven by an external Python application. Additionally, the coupling of the Python-based OpenMC depletion solver with the Cardinal application is demonstrated. A multiphysics model of a pressurized water reactor, incorporating neutronics, heat conduction, thermal-fluids, and depletion, is presented to showcase this new Cardinal capability that is enabled by the MOOSE web server capability.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

A Multicomponent Reactive Transport Model for Integrated Surface‐Subsurface Hydrology Problems

Abstract Despite the widespread use of integrated hydrology models in a variety of applications, consideration of multicomponent reactive transport is still not common. The implementation of these processes requires coupling transport at the surface‐subsurface interface and efficient solution of the non‐linear geochemical model that is consistent with the integrated hydrology solution. The Advanced Terrestrial Simulator provides a flexible multiphysics framework that facilitated this process. In this work, the integrated reactive transport process kernel (PK) was weakly coupled to the integrated hydrology PK. In turn, integrated transport and reactions were coupled using an operator splitting approach. This splitting enabled an explicit solution of the integrated transport problem, including a novel algorithm to calculate exchange fluxes across the surface‐subsurface interface and a point‐by‐point solution of the geochemical problem. Geochemical capabilities were added using well‐established external codes, but rather than using a custom interface to each, a generic interface was used that clearly specifies the variables and operations used by the chemistry PK. The implementation is demonstrated with two example simulations: transport of a tracer in a soil column as it saturates over time and water ponds on the surface and reactive transport in a hillslope driven by successive wet‐dry cycles that result in infiltration, runoff and exfiltration processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Surface termination control of charge transfer and band alignment across a semiconductor–crystalline-oxide heterojunction

Charge redistribution across heterojunctions has long been utilized to induce functional response in materials systems. Here we examine how the composition of the terminating surface affects charge transfer across a heterojunction consisting of Si and the crystalline complex oxide SrTiO 3 . Itinerant electrons in Si migrate across the interface toward the surface of SrTiO 3 due to surface depletion. The electron transfer in turn creates an electric field across the interface that modifies the interfacial dipole associated with bonding between SrTiO 3 and Si. The modification in the dipole leads to a change in band alignment, in which the conduction band of SrTiO 3 moves from being above the valence band of Si in energy, to below it. By capping the SrTiO 3 surface with ultrathin (≤ 1 nm) layers of BaO, SrO or TiO 2 , charge transfer across the interface can be weakened or inhibited. Ab initio modeling implicates the adsorption of oxygen associated with exposure to ambient conditions as driving the surface depletion in SrTiO 3 . In conclusion, the electronic coupling between the surface and buried interface expands the functionality of semiconductor-crystalline oxide heterojunctions.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Development of a fully automated fluid resupply interface system

The results of a cooperative effort to develop fluid components and systems that facilitate on-orbit servicing are discussed. The evolution from manual couplings to semi-automatic dual line interfaces to fully automatic multi-line resupply interfaces is traced. Hardware designs are presented in the context of solutions to requirements. Test data and user evaluations are reviewed.

Cardin, J. M.↗
NASA NTRS1996

A General Interface Method for Aeroelastic Analysis of Aircraft

The aeroelastic analysis of an aircraft requires an accurate and efficient procedure to couple aerodynamics and structures. The procedure needs an interface method to bridge the gap between the aerodynamic and structural models in order to transform loads and displacements. Such an interface method is described in this report. This interface method transforms loads computed by any aerodynamic code to a structural finite element (FE) model and converts the displacements from the FE model to the aerodynamic model. The approach is based on FE technology in which virtual work is employed to transform the aerodynamic pressures into FE nodal forces. The displacements at the FE nodes are then converted back to aerodynamic grid points on the aircraft surface through the reciprocal theorem in structural engineering. The method allows both high and crude fidelities of both models and does not require an intermediate modeling. In addition, the method performs the conversion of loads and displacements directly between individual aerodynamic grid point and its corresponding structural finite element and, hence, is very efficient for large aircraft models. This report also describes the application of this aero-structure interface method to a simple wing and an MD-90 wing. The results show that the aeroelastic effect is very important. For the simple wing, both linear and nonlinear approaches are used. In the linear approach, the deformation of the structural model is considered small, and the loads from the deformed aerodynamic model are applied to the original geometry of the structure. In the nonlinear approach, the geometry of the structure and its stiffness matrix are updated in every iteration and the increments of loads from the previous iteration are applied to the new structural geometry in order to compute the displacement increments. Additional studies to apply the aero-structure interaction procedure to more complicated geometry will be conducted in the second phase of the present contract.

Tzong, T.↗
DOE OSTI2023

Splitting interfaces in 4d $ \mathcal{N} $ = 4 SYM

We discuss entanglement entropies in 4d interface CFTs based on 4d $ \mathcal{N} $ = 4 SYM coupled to 3d $ \mathcal{N}$ = 4 degrees of freedom localized on an interface. Focusing on the entanglement between the two half spaces to either side of the interface, we show that applying the Ryu-Takayanagi prescription in general leads to multiple natural entangle- ment entropies. We interpret the different entropies as corresponding to different ways of assigning the 3d degrees of freedom localized on the interface to the two half spaces. We contrast these findings with recent discussions of universal relations for entanglement entropies in 2d interface CFTs and formulate generalized relations for 4d interface CFTs which incorporate our results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Enabling Stable and Salt-Free Formic Acid Production via Reactive Interface Optimization in Forward-Bias Bipolar-Membrane CO2 Electrolyzers

Electrochemical conversion of CO2 to liquid products is limited by parasitic reactions that consume products and destabilize operation. Here, we show that salt-free formic acid synthesis in a forward-bias bipolar-membrane CO2 electrolyzer is governed by a coupled reaction-transport instability driven by parasitic anode formic acid oxidation. Operando mass spectrometry reveals that this process proceeds through CO-mediated poisoning, identifying catalyst tolerance to CO as a key descriptor of anode selectivity. Among the catalysts examined, PtRu/C preferentially promotes hydrogen oxidation over formic acid oxidation. Coupling this catalyst with transport-interface engineering improves product removal, enhances Faradaic and energy efficiency, and enables stable operation at 200 mA/cm2 for 190 h with a voltage decay of 0.64 mV/h. Techno-economic analysis indicates an 18% reduction in minimum selling price and highlights product concentration as the dominant cost lever. These results establish a general framework for suppressing product oxidation in liquid-product electrolyzers.

Hu, Leiming↗
DOE OSTI2025

Integrated Molten Salt Reactor Modeling Capabilities in NEAMS Thermal Hydraulics Tools

The DOE neams program supports a full range of computational thermal fluids analysis capabilities and code developments for a broad range of advanced reactor concepts. The research and development approach under the thermal fluids technical area synergistically combines three length and time scales in a hierarchical multi-scale approach. To enable multi-scale thermal fluids capability using these codes, a key joint effort has been underway to develop an integrated system- and engineering-scale thermal fluids analysis capability, through integration of SAM and Pronghorn codes, both based on the MOOSE framework. This report summarizes recent advances in developing an integrated system- and engineering-scale modeling capability for the msr concept, which has gained significant interest in recent years. A consistent framework was established by coupling Pronghorn and SAM through the Saline interface, with thermophysical properties provided by the Molten Salt Thermal Property Database (MSTDB-TP). Further improvements were made to the coupling schemes and domain-overlapping strategies, enhancing the stability and robustness of multi-code simulations. Verification and validation efforts demonstrate the accuracy of this integration across a range of benchmark problems, including one-dimensional heated pipe flows, three-dimensional natural convection loops with evolving isotopic compositions, and \gls{msre} demonstration cases. Within Pronghorn, new capabilities were introduced to model corrosion and noble-metal plating phenomena, supported by an extended thermal-hydraulics framework and refined turbulence treatments. To capture two-phase flow behavior, a multiphase Euler–Euler model was implemented in Pronghorn, including advanced closure relations, high-resolution advection techniques, and capillary force reconstruction. Preliminary verification cases confirm the fidelity of the approach, while planned validation efforts target canonical multiphase benchmarks and application to msr components such as the msre pump bowl. Finally, updates to SAM’s msr mass transfer modeling were extended to consider noble gas migration into porous structures like graphite. The point kinetics model was updated to include reactivity feedback contributions from any defined species, such as xenon. The gas transport model was expanded for applicability to gas mixtures, bubble efflux phenomena, and species transport between liquid and gas phases. A selection of multi-scale Sherwood number correlations from MOSCATO/NekRS and multi-phase correlations from literature have been added for improved accuracy in calculating mass transfer coefficients. A companion effort on developing system-level redox corrosion has also been incorporated into SAM. Collectively, these enhancements strengthen the predictive capability of SAM and Pronghorn for simulating MSR thermal-hydraulics, corrosion, multiphase behavior, and fission-product transport, providing a more complete toolset for design, safety analysis, and licensing support of next-generation \gls{msr}s.

42 - ENGINEERING↗
NASA NTRS1985

Influence of Melt Convection on Solid-Liquid Interface Under Terrestrial and Reduced Gravity Environments

Solidification and crystal growth processes involve thermal and solutal gradients within a molten phase. In the presence of gravity, such gradients result in convective flows which interact with diffusion fields at the solid-liquid interface. Dendritic growth kinetics was studied in transparent model systems which freeze similarily to most metals. Succinonitrile shows a strong influence of convection at supercoolings below about 1K. Fluid flows adjacent to solid-liquid interfaces and the behavior of shear flows in vertical annular geometries are studied. Novel low-frequency eigenstates were discovered and classified as coupled modes, for their involvement with interfacial deformation coupled to the fluid flow, and are unknown in systems without deformable interfaces. The dependence of coupled convection modes on interfacial geometry, gravity, fluid properties, and transformation characteristics studied for several annual flow arrangements with nominally pure solid-liquid systems.

Glicksman, M. E.↗
DOE OSTI2024

The Role of Nonequilibrium Solvent Effects in Enhancing Direct CO 2 Capture at the Air–Aqueous Amino Acid Interface

Direct air capture (DAC) technologies are limited by the poor understanding of the dynamic role of interfaces in modulating the chemisorption of CO 2 from air into solutions. While the reactivity of aqueous amine-based solvents in the bulk environment is strongly inhibited by nonequilibrium solvent effects, promoting DAC at interfaces posits a possibility to reduce the coupling with the solvent and significantly accelerate DAC. Building on an experimentally proven concept to bring an anionic glycine absorbent to the interface through ion-pairing interactions with a positively charged surfactant, we establish the fundamental time scales for key elementary steps involved in DAC with rate theory and enhanced-sampling ab initio molecular dynamics simulations. Here, we elucidate the mechanism by which water influences the free energy barriers and dynamical crossing-recrossing of those barriers, affecting the reaction rates. We find that water reorganizes to partially dehydrate [-NH 2 ], facilitating S N 2-based CO 2 conversion to a zwitterion, which then releases a proton via overhydration of [-NH 2 ]. The low-density interfacial water favors dehydration over overhydration, leading to a comparatively higher barrier (slower kinetics) for proton release. The barrier-recrossing events neutralize this effect, letting both steps occur at the same time scale (sub-microseconds) and making the overall DAC process faster at the interface than in the bulk water. Such an understanding of environment-sensitive solvent effects on the reaction kinetics will help design tailored interfaces for enhanced CO 2 capture kinetics via control of solvation and ion paring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Strong Structural and Electronic Coupling in Metavalent PbS Moiré Superlattices

Moiré superlattices are twisted bilayer materials in which the tunable interlayer quantum confinement offers access to new physics and novel device functionalities. Previously, moiré superlattices were built exclusively using materials with weak van der Waals interactions, and synthesizing moiré superlattices with strong interlayer chemical bonding was considered to be impractical. Here, in this study, using lead sulfide (PbS) as an example, we report a strategy for synthesizing moiré superlattices coupled by strong chemical bonding. We use water-soluble ligands as a removable template to obtain free-standing ultrathin PbS nanosheets and assemble them into direct-contact bilayers with various twist angles. Atomic-resolution imaging shows the moiré periodic structural reconstruction at the superlattice interface due to the strong metavalent coupling. Electron energy loss spectroscopy and theoretical calculations collectively reveal the twist-angle-dependent electronic structure, especially the emergent separation of flat bands at small twist angles. The localized states of flat bands are similar to well-arranged quantum dots, promising an application in devices. This study opens a new door to the exploration of deep energy modulations within moiré superlattices alternative to van der Waals twistronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Time-dependent THMC properties and microstructural evolution of damaged rocks in excavation damage zone

Modeling coupled thermo-hydro-mechanical-chemical (THMC) processes in host rocks near high-level nuclear waste (HLW) repositories at various time scales is an extremely challenging task. The current study integrates experimental, theoretical, and numerical methods in assessing the evolution of excavation damage zone (EDZ) over time and its implication on the long-term migration of hazardous species. Argillite and rock salt and are the focus of this study. The first part of the report presents a novel time-dependent directional microcrack damage theory for generic brittle rocks. It features detailed statistical description of the microcracks within a damaged solid, permitting a direct upscaling of microscale processes such as crack growth kinetics, crack closure/opening, sliding friction to explain the macroscopic creep, nonlinear elasticity, shear dilation, and loading-unloading hysteresis. This provides a basic platform for describing the anisotropic mechanical and transport properties of damaged rocks during excavation and subsequent THMC loadings. The model is validated and numerically implemented to Finite Element (FE) package ABAQUS through the user-defined material (UMAT) interface and have demonstrated great potential in resolving the time-dependent and anisotropic evolution of damage in the EDZ. The second part of the report presents a multi-scale experimental effort in characterizing the thermal, hydraulic, and mechanical properties of Mancos shale and Avery Island salt. For the Mancos shale, triaxial compression tests are performed at different confining pressures and temperatures to probe its thermomechanical properties relevant to HLW repositories. The obtained stress-strain data are interpreted using the proposed directional damage theory. Post-test specimens are subjected to gas permeability tests to reveal the correlation between permeability and the degree of microcracking. At microscale, temperature-controlled nanoindentation tests are performed and found a linear correlation between fracture toughness and elastic modulus from 25°C to 300°C. For Avery Island salt, we have designed and manufactured a novel relative-humidity controlled uniaxial creep device. Long-term creep tests at low stresses (< 5 MPa) are performed at different levels of relative humidity (RH). Besides confirming the much higher creep rates as one would expect through extrapolating the high-stress creep data, the results reveal that the steady-state creep rate of rock salt is strongly dependent on the ambient RH, an aspect that is often neglected in the literature. Both behaviors can be attributed to the pressure-solution creep mechanism which dominates at low stress and high RH levels. The third part of the report explores a set of numerical strategies in modeling the THMC behavior of porous geomaterials. A fully implicit, monolithic FE solution that can flexibly interface with different material models and coupling mechanisms for THMC problems is developed and verified through the ABAQUS user-defined element (UEL) interface. The scheme is used to study the THM response of a hypothetical HLW storage site with reference to an existing in-situ heater test. Strategies for integrating the UEL and the microcrack UMAT are suggested. Another numerical endeavor of this study is to implement a higher-order asymptotic homogenization method to account for the heterogeneous porous structures. The same method is then extended to perform microstructure-informed thermo-mechanical modeling of generalized continua. The above outcomes of this project provide a strong thrust towards enhancing the fundamental understanding and modeling capability of the long-term evolution of host rocks in EDZ, thus helping achieve the design goal of 1-million-year isolation of high-level nuclear wastes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Image-based modeling of coupled electro-chemo-mechanical behavior of Li-ion battery cathode using an interface-modified reproducing kernel particle method

Abstract An interface-modified reproducing kernel particle method (IM-RKPM) is introduced in this work to allow for a direct model construction from image pixels of heterogeneous polycrystalline Li-ion battery microstructures. The interface-modified reproducing kernel (IM-RK) approximation is constructed through scaling of a kernel function by a regularized distance function in conjunction with strategic placement of interface node locations. This leads to RK shape functions with either weak or strong discontinuities across material interfaces, suitable for modeling various interface mechanics. With the placement of a triple junction node and distance-based scaling of kernel functions, the resulting IM-RK shape function also possesses proper discontinuities at the triple junctions. This IM-RK approximation effectively remedies the well-known Gibb’s oscillation in the smooth approximation of discontinuities. Different from the conventional meshfree approaches for interface discontinuities, this IM-RK approach is done without additional degrees of freedom associated with the enrichment functions, and it is formulated with the standard procedures in the RK shape function construction. This work focuses on identifying the accuracy and convergence properties of IM-RKPM for modeling the coupled electro-chemo-mechanical system. A linear patch test is formulated and numerically tested for the electro-chemo-mechanical coupled problem with a Butler–Volmer boundary condition representing the physical conditions in Li-ion battery microstructures. This is followed by verification of the optimal rates of convergence of IM-RKPM for solving the coupled problem with higher order solutions. The image-based modeling of Li-ion battery microstructures in the numerical examples demonstrates the applicability of the proposed method to realistic Li-ion battery materials modeling.

25 ENERGY STORAGE↗