SEARCH · Engineering Papers

Results for “input data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Inversion of satellite magnetic anomaly data

A method of finding a first approximation to a crustal magnetization distribution from inversion of satellite magnetic anomaly data is described. Magnetization is expressed as a Fourier series in a segment of spherical shell. Input to this procedure is an equivalent source representation of the observed anomaly field. Instability of the inversion occurs when high frequency noise is present in the input data, or when the series is carried to an excessively high wave number. Preliminary results are given for the United States and adjacent areas.

Mayhew, M. A.↗

NASA NTRS1986

Three-Dimensional Turbomachine-Blade-Row Analysis Code

Computer program (MERNEW3D) developed that prepares bulk of input data set required for Denton three-dimensional inviscid turbomachine-blade-row analysis code. Denton input generated from minimum of geometry and flow-variable information by using cubic spline curve fits for interpolation and extrapolation. Curve-fitting procedures taken from previously developed and widely used NASA computer program (MERIDL), which performs meridional streamsurface analysis.

Glassman, A. J.↗

NASA NTRS2001

Analysis and visualization of single-trial event-related potentials

In this study, a linear decomposition technique, independent component analysis (ICA), is applied to single-trial multichannel EEG data from event-related potential (ERP) experiments. Spatial filters derived by ICA blindly separate the input data into a sum of temporally independent and spatially fixed components arising from distinct or overlapping brain or extra-brain sources. Both the data and their decomposition are displayed using a new visualization tool, the "ERP image," that can clearly characterize single-trial variations in the amplitudes and latencies of evoked responses, particularly when sorted by a relevant behavioral or physiological variable. These tools were used to analyze data from a visual selective attention experiment on 28 control subjects plus 22 neurological patients whose EEG records were heavily contaminated with blink and other eye-movement artifacts. Results show that ICA can separate artifactual, stimulus-locked, response-locked, and non-event-related background EEG activities into separate components, a taxonomy not obtained from conventional signal averaging approaches. This method allows: (1) removal of pervasive artifacts of all types from single-trial EEG records, (2) identification and segregation of stimulus- and response-locked EEG components, (3) examination of differences in single-trial responses, and (4) separation of temporally distinct but spatially overlapping EEG oscillatory activities with distinct relationships to task events. The proposed methods also allow the interaction between ERPs and the ongoing EEG to be investigated directly. We studied the between-subject component stability of ICA decomposition of single-trial EEG epochs by clustering components with similar scalp maps and activation power spectra. Components accounting for blinks, eye movements, temporal muscle activity, event-related potentials, and event-modulated alpha activities were largely replicated across subjects. Applying ICA and ERP image visualization to the analysis of sets of single trials from event-related EEG (or MEG) experiments can increase the information available from ERP (or ERF) data. Copyright 2001 Wiley-Liss, Inc.

Non-NASA Center↗

NASA NTRS1974

A multichannel biotelemetry transmitter utilizing a PCM subcarrier

Making use of the currently available integrated circuits, a miniature PCM telemetry system operating from one miniature 9-volt battery and drawing less than 5 milliamps has been constructed. The use of this PCM telemetry signal not only provides accurate data transmission, but requires a minimum of RF bandwidth. The serial format that results from multiplexing the input data allows the use of a single channel recorder with its cost savings over a multichannel tape recorder. An additional benefit of the PCM encoding is that the data is in digital format and is directly suitable for computer use.

Fryer, T. B.↗

NASA NTRS1979

Analysis of regression methods for solar activity forecasting

The paper deals with the potential use of the most recent solar data to project trends in the next few years. Assuming that a mode of solar influence on weather can be identified, advantageous use of that knowledge presumably depends on estimating future solar activity. A frequently used technique for solar cycle predictions is a linear regression procedure along the lines formulated by McNish and Lincoln (1949). The paper presents a sensitivity analysis of the behavior of such regression methods relative to the following aspects: cycle minimum, time into cycle, composition of historical data base, and unnormalized vs. normalized solar cycle data. Comparative solar cycle forecasts for several past cycles are presented as to these aspects of the input data. Implications for the current cycle, No. 21, are also given.

Lundquist, C. A.↗

NASA NTRS1981

The self-consistent calculation of pseudo-molecule energy levels, construction of energy level correlation diagrams and an automated computation system for SCF-X(Alpha)-SW calculations

The self consistent calculation of the electronic energy levels of noble gas pseudomolecules formed when a metal surface is bombarded by noble gas ions is discussed along with the construction of energy level correlation diagrams as a function of interatomic spacing. The self consistent field x alpha scattered wave (SCF-Xalpha-SW) method is utilized. Preliminary results on the Ne-Mg system are given. An interactive x alpha programming system, implemented on the LeRC IBM 370 computer, is described in detail. This automated system makes use of special PROCDEFS (procedure definitions) to minimize the data to be entered manually at a remote terminal. Listings of the special PROCDEFS and of typical input data are given.

Schlosser, H.↗

NASA NTRS1988

Stratospheric responses to solar ultraviolet variations - Comparisons with photochemical models

At latitudes and altitudes where transport effects on ozone mixing ratio can be neglected, ozone and temperature responses to short-term changes in solar ultraviolet flux can be used to calculate implied bounds on two basic photochemical parameters: the odd oxygen photochemical relaxation time and the chemical sensitivity of odd oxygen to local temperature changes. Seasonally averaged values of these parameters are derived from response measurements and are compared with model calculations between 0.7 and 4 mbar at tropical latitudes. Results are in agreement within measurement and model uncertainties at all pressure levels. Model values of mean ozone and of the response of ozone to perturbations are functions of the same photochemical data. Therefore this agreement provides a constraint which should be considered when changes are proposed in model input data for the purpose of improving agreement between measured and calculated high-altitude ozone.

Hood, L. L.↗

NASA NTRS1992

Seasonal variation of surface radiation budget derived from International Satellite Cloud Climatology Project C1 data

Surface radiation budget data are presented for the midseasonal months of July and October of 1983 and January and April of 1984. These data allow the examination of geographical and seasonal variations of the entire surface radiation budget from pole to pole. The latest flux estimation techniques have been used along with data from the International Satellite Cloud Climatology Project and the Earth Radiation Budget Experiment. Regional, zonal, and hemispheric distributions of the downward and net components of both shortwave and longwave fluxes and of the net total surface fluxes are determined. Seasonal flux variation per region, expressed as flux range, is illustrated for these components also. The estimated fluxes appear to be accurate to about 16 W/sq m on a global average, based on sensitivity analyses and comparisons with ground data. An analysis of flux errors showed that most of the error was attributable to errors in input data.

Darnell, Wayne L.↗

NASA NTRS1998

The 'CommTech' Methodology: A Demand-Driven Approach to Efficient, Productive and Measurable Technology Transfer

Market research sources were used to initially gather primary technological problems and needs data from non-aerospace companies in targeted industry sectors. The company-supplied information served as input data to activate or start-up an internal, phased match-making process. This process was based on technical-level relationship exploration followed by business-level agreement negotiations, and culminated with project management and execution. Space Act Agreements represented near-term outputs. Company product or process commercialization derived from Lewis support and measurable economic effects represented far-term outputs.

Horsham, Gray A. P.↗

NASA NTRS1972

Real-air data reduction procedures based on flow parameters measured in the test section of supersonic and hypersonic facilities

Data-reduction procedures for determining free stream and post-normal shock kinetic and thermodynamic quantities are derived. These procedures are applicable to imperfect real air flows in thermochemical equilibrium for temperatures to 15 000 K and a range of pressures from 0.25 N/sq m to 1 GN/sq m. Although derived primarily to meet the immediate needs of the 6-inch expansion tube, these procedures are applicable to any supersonic or hypersonic test facility where combinations of three of the following flow parameters are measured in the test section: (1) Stagnation pressure behind normal shock; (2) freestream static pressure; (3) stagnation point heat transfer rate; (4) free stream velocity; (5) stagnation density behind normal shock; and (6) free stream density. Limitations of the nine procedures and uncertainties in calculated flow quantities corresponding to uncertainties in measured input data are discussed. A listing of the computer program is presented, along with a description of the inputs required and a sample of the data printout.

Miller, C. G., III↗

NASA NTRS1987

Analysis of counting errors in the phase/Doppler particle analyzer

NASA is investigating the application of the Phase Doppler measurement technique to provide improved drop sizing and liquid water content measurements in icing research. The magnitude of counting errors were analyzed because these errors contribute to inaccurate liquid water content measurements. The Phase Doppler Particle Analyzer counting errors due to data transfer losses and coincidence losses were analyzed for data input rates from 10 samples/sec to 70,000 samples/sec. Coincidence losses were calculated by determining the Poisson probability of having more than one event occurring during the droplet signal time. The magnitude of the coincidence loss can be determined, and for less than a 15 percent loss, corrections can be made. The data transfer losses were estimated for representative data transfer rates. With direct memory access enabled, data transfer losses are less than 5 percent for input rates below 2000 samples/sec. With direct memory access disabled losses exceeded 20 percent at a rate of 50 samples/sec preventing accurate number density or mass flux measurements. The data transfer losses of a new signal processor were analyzed and found to be less than 1 percent for rates under 65,000 samples/sec.

Oldenburg, John R.↗

NASA NTRS1974

NASTRAN variance analysis and plotting of HBDY elements

The NASTRAN Thermal Analyzer has been intended to do variance analysis and plot the thermal boundary elements. The objective of the variance analysis addition is to assess the sensitivity of temperature variances resulting from uncertainties inherent in input parameters for heat conduction analysis. The plotting capability provides the ability to check the geometry (location, size and orientation) of the boundary elements of a model in relation to the conduction elements. Variance analysis is the study of uncertainties of the computed results as a function of uncertainties of the input data. To study this problem using NASTRAN, a solution is made for both the expected values of all inputs, plus another solution for each uncertain variable. A variance analysis module subtracts the results to form derivatives, and then can determine the expected deviations of output quantities.

Harder, R. L.↗

NASA NTRS1975

Packaging printed circuit boards: A production application of interactive graphics

The structure and use of an Interactive Graphics Packaging Program (IGPP), conceived to apply computer graphics to the design of packaging electronic circuits onto printed circuit boards (PCB), were described. The intent was to combine the data storage and manipulative power of the computer with the imaginative, intuitive power of a human designer. The hardware includes a CDC 6400 computer and two CDC 777 terminals with CRT screens, light pens, and keyboards. The program is written in FORTRAN 4 extended with the exception of a few functions coded in COMPASS (assembly language). The IGPP performs four major functions for the designer: (1) data input and display, (2) component placement (automatic or manual), (3) conductor path routing (automatic or manual), and (4) data output. The most complex PCB packaged to date measured 16.5 cm by 19 cm and contained 380 components, two layers of ground planes and four layers of conductors mixed with ground planes.

Perrill, W. A.↗

NASA NTRS1976

Tables and charts of equilibrium thermodynamic properties of ammonia for temperatures from 500 to 50,000 K.

Equilibrium thermodynamic properties for pure ammonia were generated for a range of temperature from 500 to 50,000 K and pressure from 0.01 to 40 MN/sq m and are presented in tabulated and graphical form. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular-weight ratio, specific heat at constant pressure, specific heat at constant volume, isentropic exponent, and species mole fractions. These properties were calculated by the method which is based on minimization of the Gibbs free energy. The data presented herein are for an 18-species ammonia model. Heats of formation and spectroscopic constants used as input data are presented. Comparison of several thermodynamic properties calculated with the present program and a second computer code is performed for a range of pressure and for temperatures up to 30,000 K.

Simmonds, A. L.↗

NASA NTRS1977

Interactive LORAN-C to geographic and geographic-to-LORAN-C computation

The LORAN program is stored in CMS disk files for use by Avionics Engineering Center terminal users. A CMS EXEC file named LORAN controls program operation. The user types LORAN and the program then prompts for data input and produces output on the terminal. The FORTRAN program refers to a disk file of LORAN master data giving station locations, coding delays, repetition rate and station pair identification letters. For Geographic-to-LORAN conversion, no iterative computations are required; the program is a straightforward coordinate conversion based upon the techniques described by the Navy. For LORAN-to-Geographic conversion, the original Navy program required a dead-reckoned position, near the actual unknown fix, to begin computations. No iteration was performed to obtain the LORAN fix, but internal program errors occurred at execution time if the dead-reckoned fix were displaced from the actual fix by more than a few minutes of latitude or longitude. In order to enhance usefulness of the program for the terminal user, an iterative routine was added which allows a single dead-reckoned position to be entered from the master data file for each LORAN chain. The results compare exactly with the LORAN-C navigation chart, and provide adequate benchmark data for general aviation flight planning and data analysis.

Piecuch, L. M.↗

NASA NTRS1989

Human factors model concerning the man-machine interface of mining crewstations

The U.S. Bureau of Mines is developing a computer model to analyze the human factors aspect of mining machine operator compartments. The model will be used as a research tool and as a design aid. It will have the capability to perform the following: simulated anthropometric or reach assessment, visibility analysis, illumination analysis, structural analysis of the protective canopy, operator fatigue analysis, and computation of an ingress-egress rating. The model will make extensive use of graphics to simplify data input and output. Two dimensional orthographic projections of the machine and its operator compartment are digitized and the data rebuilt into a three dimensional representation of the mining machine. Anthropometric data from either an individual or any size population may be used. The model is intended for use by equipment manufacturers and mining companies during initial design work on new machines. In addition to its use in machine design, the model should prove helpful as an accident investigation tool and for determining the effects of machine modifications made in the field on the critical areas of visibility and control reach ability.

Rider, James P.↗

NASA NTRS1989

Building an environment model using depth information

Modeling the environment is one of the most crucial issues for the development and research of autonomous robot and tele-perception. Though the physical robot operates (navigates and performs various tasks) in the real world, any type of reasoning, such as situation assessment, planning or reasoning about action, is performed based on information in its internal world. Hence, the robot's intentional actions are inherently constrained by the models it has. These models may serve as interfaces between sensing modules and reasoning modules, or in the case of telerobots serve as interface between the human operator and the distant robot. A robot operating in a known restricted environment may have a priori knowledge of its whole possible work domain, which will be assimilated in its World Model. As the information in the World Model is relatively fixed, an Environment Model must be introduced to cope with the changes in the environment and to allow exploring entirely new domains. Introduced here is an algorithm that uses dense range data collected at various positions in the environment to refine and update or generate a 3-D volumetric model of an environment. The model, which is intended for autonomous robot navigation and tele-perception, consists of cubic voxels with the possible attributes: Void, Full, and Unknown. Experimental results from simulations of range data in synthetic environments are given. The quality of the results show great promise for dealing with noisy input data. The performance measures for the algorithm are defined, and quantitative results for noisy data and positional uncertainty are presented.

Roth-Tabak, Y.↗

NASA NTRS2003

The Reanalysis for Stratospheric Trace Gas Studies

The "Reanalysis for Stratospheric Trace Gas Studies" (ReSTS) project intends to provide a state-of-the-art meteorological dataset for use in chemistry-transport models (CTMs). The initial focus is on the period from May 1991 until April 1995, which encompasses the initial few years of observations from NASA's Upper Atmosphere Research Satellite (UARS) as well as the abrupt increase and slow decay of volcanic aerosol loading from Mount Pinatubo. The reanalysis is being performed using NASA's operational "GEOS-4" data assimilation system. The results presented in this paper will begin with an overview of the meteorology of the ReSTS period, validating the ReSTS data against independent analyses, followed by an evaluation of the system statistics (the "Observation minus Forecast" for different input data types). Some sensitivities to the assumptions made in the assimilation process will be presented, including aspects of the forecast model and the statistical model used in the observation-forecast merging. Aspects of trace-gas transport will be discussed, focussing on the on-line water vapor distribution (which is a quasi-inert trace gas in the stratosphere), off-line transport studies of ozone and selected long-lived species, as well as assimilated ozone. The results will be discussed in the context of transport studies and our ability to use reanalyzed datasets to examine long-term variations in the meteorology and composition of the middle atmosphere.

Pawson, Steven↗