Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Coupling nitrate capture with ammonia production through bifunctional redox-electrodes

Abstract Nitrate is a ubiquitous aqueous pollutant from agricultural and industrial activities. At the same time, conversion of nitrate to ammonia provides an attractive solution for the coupled environmental and energy challenge underlying the nitrogen cycle, by valorizing a pollutant to a carbon-free energy carrier and essential chemical feedstock. Mass transport limitations are a key obstacle to the efficient conversion of nitrate to ammonia from water streams, due to the dilute concentration of nitrate. Here, we develop bifunctional electrodes that couple a nitrate-selective redox-electrosorbent (polyaniline) with an electrocatalyst (cobalt oxide) for nitrate to ammonium conversion. We demonstrate the synergistic reactive separation of nitrate through solely electrochemical control. Electrochemically-reversible nitrate uptake greater than 70 mg/g can be achieved, with electronic structure calculations and spectroscopic measurements providing insight into the underlying role of hydrogen bonding for nitrate selectivity. Using agricultural tile drainage water containing dilute nitrate (0.27 mM), we demonstrate that the bifunctional electrode can achieve a 8-fold up-concentration of nitrate, a 24-fold enhancement of ammonium production rate (108.1 ug h −1 cm −2 ), and a >10-fold enhancement in energy efficiency when compared to direct electrocatalysis in the dilute stream. Our study provides a generalized strategy for a fully electrified reaction-separation pathway for modular nitrate remediation and ammonia production.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Engineering a Self-Grown TiO 2 /Ti-MOF Heterojunction with Selectively Anchored High-Density Pt Single-Atomic Cocatalysts for Efficient Visible-Light-Driven Hydrogen Evolution

A photocatalyst TiO 2 /Ti-BPDC-Pt is developed with a self-grown TiO 2 /Ti-metal–organic framework (MOF) heterojunction, i.e., TiO 2 /Ti-BPDC, and selectively anchored high-density Pt single-atomic cocatalysts on Ti-BPDC for photocatalytic hydrogen evolution. This intimate heterojunction, growing from the surface pyrolytic reconstruction of Ti-BPDC, works in a direct Z-scheme, efficiently separating electrons and holes. Pt is selectively anchored on Ti-BPDC by ligands and is found in the form of single atoms with loading up to 1.8 wt %. The selective location of Pt is the electron-enriched domain of the heterojunction, which further enhances the utilization of the separated electrons. This tailored TiO 2 /Ti-BPDC-Pt shows a significantly enhanced activity of 12.4 mmol g -1 h -1 compared to other TiO 2 - or MOF-based catalysts. In conclusion, the structure-activity relationship further proves the balance of two simultaneously exposed domains of heterojunctions is critical to fulfilling this kind of catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Regulation of Electron Cloud Density by Electronic Effects of Substituents to Optimize Photocatalytic H 2 Evolution of Carbon Dots

Carbon dots (CDs) have a wide light absorption range, which are promising candidates for photocatalytic water splitting H 2 evolution, but they show low activity for hydrogen evolution reaction (HER) due to the slow transfer efficiencies of photogenerated carriers. The electron cloud density of photocatalyst is essential for the separation and migration of photogenerated carriers. In this study, the effect mechanism of electron cloud density regulated by the substituents with different electronic effects on the photocatalytic HER of glucose-based CDs is clarified. CDs-SO 3 H and CDs-OH are first obtained by introducing electron-drawing group (–SO 3 H) and electron-donating group (–OH) using a tailoring post-processing strategy. Experimental results show that the H 2 yield catalyzed by CDs-SO 3 H is 89.95 µmol•g –1 in 4 h, which is about four times that of CDs, and 7.4 times that of CDs-OH. The –SO 3 H induces a much negative energy band and high electron cloud density on CDs edges, promoting the separation and transfer of photogenerated carriers; while the CDs-OH exhibits a high positive charge density and an upward energy band, hindering the surface complexation of electron-hole pairs and HER. Furthermore, this study will provide an insight into the design of CDs catalysts with efficient photocatalytic HER at a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effects of Non-Electrostatic Intermolecular Interactions on the Phase Behavior of pH-Sensitive Polyelectrolyte Complexes

Polyelectrolyte complexes (PECs) offer enormous material tunability and desirable functionalities, and consequently have found broad utility in biomedical and material industries. While poly(acrylic acid) (PAA) and poly( allylamine hydrochloride) (PAH) are a commonly used pairing, various aspects of the phase behavior of PAA-PAH complexes have not been sufficiently quantified. In this work, we present a comprehensive experimental study depicting the binodal phase boundaries for the PAA-PAH complexes prepared under acidic, neutral, and basic conditions using thermogravimetric analysis, turbidimetry, and optical microscopy. Under neutral and basic conditions, phase behaviors of the complexes were largely similar to one another and followed general expectations of PEC phase behavior, except for unusually high resistance to disruption of the complex with added salt. Stable complexes are observed up to 4 M NaCl concentrations. Under acidic conditions, strikingly different phase behaviors of the PAA-PAH complexes were observed. The polymer content in the complex phase increased initially, followed by an expected decrease as salt was added to the complexes. This behavior may result from a combination of associative phase separation of PAA and PAH chains, influenced by electrostatic interactions, and segregative phase separation, which can be ascribed to the influence of a combination of the hydrophobic interactions of the aliphatic polymer backbone and the interpolymer hydrogen bonding of unionized acrylic monomer units. Our systematic investigations over a range of pH detailing these discrepancies in the PAA-PAH phase behavior are expected to clarify the inconsistencies among the reports in the literature and provide the material design strategies for practical use of the PAA-PAH complexes and multilayer assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

COol Companions ON Ultrawide orbiTS (COCONUTS). I. A High-gravity T4 Benchmark around an Old White Dwarf and a Re-examination of the Surface-gravity Dependence of the L/T Transition

We present the first discovery from the COol Companions ON Ultrawide orbiTS (COCONUTS) program, a large-scale survey for wide-orbit planetary and substellar companions. We have discovered a comoving system COCONUTS-1, composed of a hydrogen-dominated white dwarf (PSO J058.9855+45.4184; d = 31.5 pc) and a T4 companion (PSO J058.9869+45.4296) at a 40farcs6 (1280 au) projected separation. We derive physical properties for COCONUTS-1B from (1) its near-infrared spectrum using cloudless Sonora atmospheric models, and (2) its luminosity and the white dwarf's age (${7.3}_{-1.6}^{+2.8}$ Gyr) using Sonora evolutionary models. The two methods give consistent temperatures and radii, but atmospheric models infer a lower surface gravity and therefore an unphysically young age. Assuming evolutionary model parameters (${T}_{\mathrm{eff}}={1255}_{-8}^{+6}$ K, $\mathrm{log}\,g={5.44}_{-0.03}^{+0.02}$ dex, $R={0.789}_{-0.005}^{+0.011}$ ${R}_{\mathrm{Jup}}$), we find that cloudless model atmospheres have brighter Y- and J-band fluxes than the data, suggesting that condensate clouds have not fully dispersed around 1300 K. The W2 flux (4.6 μm) of COCONUTS-1B is fainter than models, suggesting non-equilibrium mixing of CO. To investigate the gravity dependence of the L/T transition, we compile all 60 known L6-T6 benchmarks and derive a homogeneous set of temperatures, surface gravities, and masses. As is well known, young, low-gravity late-L dwarfs have significantly fainter, redder near-infrared photometry and ≈200–300 K cooler temperatures than old, high-gravity objects. Our sample now reveals such gravity dependence becomes weaker for T dwarfs, with young objects having comparable near-infrared photometry and ≈100 K cooler temperatures compared to old objects. Finally, we find that young objects have a larger amplitude J-band brightening than old objects, and also brighten at H band as they cross the L/T transition.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

System and method for removing water and hydrogen from anode exhaust

A fuel cell system includes an anode configured to output an anode exhaust stream comprising hydrogen, carbon dioxide, and water; and a membrane dryer configured to receive the anode exhaust stream, remove water from the anode exhaust stream, and output a membrane dryer outlet stream. The membrane dryer includes a first chamber configured to receive the anode exhaust stream; a second chamber configured to receive a purge gas; and a semi-permeable membrane separating the first chamber and the second chamber. The semi-permeable membrane is configured to allow water to diffuse therethrough, thereby removing water from the anode exhaust stream. The membrane dryer may further be configured to remove hydrogen from the anode exhaust stream.

Jolly, Stephen↗
DOE OSTI2023

In Situ Neutron Scattering Study of the Structure Dynamics of the Ru/Ca 2 N:e – Catalyst in Ammonia Synthesis

NH 3 synthesis is one of the most critical industrial processes. Compared to commercial iron catalysts, Ru catalysts show high intrinsic activity in this reaction but suffer from hydrogen poisoning. By loading Ru onto supports such as electrides and hydrides, the hydrogen poisoning problem can be significantly alleviated. However, relevant studies on the structural dynamics of the Ru/electride catalysts under reaction conditions are very scarce. Taking advantage of the high sensitivity to hydrogen species, it is possible to obtain insights into the structural changes during the reaction using in situ neutron techniques. In this study, we have investigated the structural evolution of the Ru/Ca 2 N:e – catalyst during the ammonia synthesis reaction by in situ neutron scattering (inelastic neutron scattering, INS) technique. In situ INS experiments suggest that Ca 2 N:e – is likely converted to the Ca 2 NH phase during the reaction. Unlike the previously known structure where H and N atoms are intermixed, the formed Ca 2 NH exhibits a segregated structure where the H and N atoms are located in different layers separated by the Ca layer. In conclusion, density functional theory calculations of the reaction energetics reveal that there are minor changes in the barriers and thermodynamics of the first N hydrogenation step between the two phases (Ca 2 NH phase with segregated H/N layers and intermixed Ca 2 NH phase), suggesting the impact of the phases on the reaction kinetics to be relatively minimal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Preliminary Techno-Economic Assessment of Gas Switching Reforming (GSR) of Natural Gas for Pure Hydrogen Production and Power Generation with Integrated CO2 Capture

The increasing demand for hydrogen and the CO2 intensity of natural gas (NG) reforming motivate the development of low-carbon-emission hydrogen production technologies. Gas Switching Reforming (GSR) is an advanced auto-thermal reforming technology that produces hydrogen or syngas from natural gas. It integrates inherent CO2 capture by utilizing a specialized oxygen carrier in a single fluidized bed reactor, eliminating the need for complex, energy-intensive post-combustion separation. GSR technology builds upon Chemical Looping Reforming (CLR), an experimentally proven technology with strong potential for scaling up. In this study, select oxygen carriers (OC) (NiO/Al2O3, Fe2O3-CeO2/Al2O3, and magnetite) were tested in methane steam reforming in a fixed bed reactor to determine their relative reactivities under relevant conditions for GSR (800 °C, 7 bar total pressure). Process models were then developed to perform techno-economic analysis (TEA) of GSR for hydrogen production (GSR-H₂) and a combined cycle (GSR-CC) in which high-purity H₂ is fired in a gas turbine to produce electricity. Operating at 10 bar and 1100 °C and with the additional recovery steps implemented increased H₂ production by ~30% and improved efficiency relative to prior studies. For GSR-H₂, the levelized cost of hydrogen (LCOH) is 1.61–1.64 $/kg-H₂, competitive with a reference SMR case, though operating and maintenance costs are higher due to increased electricity demand. GSR-CC has a significantly higher levelized cost of electricity (LCOE) than its reference NGCC (natural gas combined cycle) plant, suggesting it is less competitive; however, increasing production scale could make it more attractive. Life-cycle results for GSR-H2 indicate NG consumption drives ~75% of total global warming impacts (~2.3 kg CO2 eq/kg H2). An environmental, health, and safety screening suggests iron-based carriers are comparatively safer, whereas NiO may pose greater risks. Overall, GSR-H2 is a scalable, competitive option for hydrogen production using nickel and non-nickel OC.

03 NATURAL GAS↗
DOE OSTI2020

In Situ Reliability Investigation of All-Vanadium Redox Flow Batteries by a Stable Reference Electrode

Redox flow batteries (RFBs) have been studied over the past several decades as a promising candidate for stationary energy storage applications. It is therefore important to understand the reliability of RFBs and the mechanisms that cause degradation with time. Contributions from individual electrodes (cathode or anode) are difficult to separate especially for long-term cycle testing, due to the lack of a stable reference electrode. In our work, the reliability and degradation mechanisms of an all-vanadium RFB were investigated by a stable reference electrode based on the dynamic hydrogen electrode (DHE). With factor exploration and design optimization, the newly developed DHE reference electrode demonstrated high accuracy and long-term stability that enables in-situ monitoring of individual electrode signals (potentials and impedances) over hundreds of cycles in a vanadium RFB. This approach enables the full cell degradation to be separated and the degradation attributed to contributions from the cathode and anode. The cathode and anode were found to play quite different roles in the increase in overpotential of the vanadium RFB during long-term cycling. The anode reaction limited both the charge and discharge capacity over 100 cycles. In addition, the negative side also appeared to be the rate limiting factor throughout cycling as determined by EIS measurement. The cathode contributed to the performance degradation as cycling exceeded 50 cycles.

Huang, Qian↗
DOE OSTI2025

Recovering high-purity uranyl nitrate from simulated used nuclear fuel dissolver solutions by crystallization: rejecting technetium

The separation of U from Tc and other problematic fission product elements like Mo and Ru, along with Sr, Zr, Cs, and Nd, has been achieved via the crystallization of uranyl nitrate hexahydrate (UNH). Rejection of technetium as pertechnetate anion ( 99 TcO 4 – ) is an especially important feature of this system, as it otherwise tends to follow U (VI) in extractive separations. It also raises the salient question regarding why this oxoanion cannot replace nitrate within the crystalline lattice of UNH. Results showed high-yield (>90 %), high-purity (>99 %) recovery of U as UNH from solutions containing 99 TcO 4 – by simple reduction of temperature from 60°C to 20°C. There was no observable interaction of 99 TcO 4 – with UO 2 2+ . The addition of other cations like, Sr 2+ , Zr 4+ , Cs + , and Nd 3+ , also did not form secondary, contaminant solid phases, leaving the > 99 % of the fission product elements in the mother liquor, while the U was recovered at > 90 %. Similarly, Mo and Ru, when added to the mixture, were shown to behave as the other fission-product elements, remaining in the mother liquor during crystallization. As a result, DFT calculations showed that, despite the higher binding strength of TcO 4 – , HMoO 4 – , and BiO 3 – with the UO 2 2+ cation compared to NO 3 – , the hydrogen-bonding network of the two coordinated ions and four waters of hydration in the UNH crystal structure is the driving force for the high specificity of this separation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Asymmetric vanadium-based aqueous flow batteries

Vanadium redox couples (V(II)/V(III) on a negative electrode or V(IV)/V(V) on a positive electrode) can be paired with other redox couples to form novel flow batteries (FBs). As an anolyte, the V(II)/V(III) redox couple can be paired with iron, manganese, cobalt, and cerium redox couples to form novel vanadium-iron (V-Fe), vanadium-manganese (V-Mn), vanadium-cobalt (V-Co), and vanadium-cerium (V-Ce) FBs, respectively. The V(IV)/V(V) redox couple as a catholyte can be coupled with hydrogen to form a vanadium hydrogen (V-H2) FB. In those new redox chemistries, redox reactions, energy density, round-trip efficiencies, crossover issues, and cell components (i.e., separator, ion exchange membrane, and electrode) are different from an all-vanadium flow battery discussed in previous chapters, and thus warrant a detailed discussion.

Vanadium, V-Fe, V-Ce, V-Co↗
DOE OSTI2021

Process model for multilayer slide coating of polymer electrolyte membrane fuel cells

Slide coating is a precision method suitable for depositing multiple liquid-film layers simultaneously. Originally developed in the photographic film industry, it has been deployed for manufacturing of other products that benefit from multilayer coatings. One emerging application is the manufacture of polymer electrolyte membrane fuel cells (PEMFCs), which are used to produce electricity through electrochemical reactions of hydrogen and oxygen gas. The membrane-electrode assembly (MEA), in which key electrochemical reactions occur, consists of three layers that are typically deposited separately in serial fashion and then laminated together to form the three-layer MEA, i.e., three sequential steps of coat and dry. Adapting the process to simultaneous, multilayer slide coating of all three layers will save equipment cost and space while minimizing possible exposure to contaminants during transition between the steps. We are developing a three-layer slide coating model to aid the manufacturing process design of PEMFC. The model accounts for rheology of each layer, which typically exhibit shear thinning behavior. Model predictions are used to investigate simultaneous coatability of catalyst inks and to determine the best layer-by-layer ink selection.

25 ENERGY STORAGE↗
DOE OSTI2020

A Bioinspired Multicomponent Catalytic System for Converting Carbon Dioxide into Methanol Autocatalytically

Nature utilizes multicomponent catalyst systems to convert simple, abundant starting materials to complex molecules that are essential for life. In contrast, synthetic chemical transformations rarely adopt this strategy because the sophisticated supramolecular assemblies used by biology for active site separation and substrate trafficking are difficult to replicate. Herein, a method is described for multicomponent catalyst separation that involves encapsulating transition metal complexes in nanoporous materials called metal-organic frameworks. The multicomponent catalyst system was highly active for converting hydrogen and carbon dioxide to methanol, and it could be formulated so that it is readily recyclable. Moreover, an autocatalytic feature was uncovered that was only made possible by utilizing the multicomponent catalyst strategy employed. Furthermore, these results open avenues for obtaining fuel from abundant and renewable resources.

08 HYDROGEN↗
DOE OSTI2026

Insights into Rotational and Translational Dynamics in Mixtures of Ethylene Glycol and Choline Chloride Using Nuclear Magnetic Resonance Techniques

This work examines molecular dynamics and interactions in ethylene glycol–choline chloride (EG–ChCl) mixtures across 0–33 mol % ChCl, spanning the true eutectic region near 17–20 mol % and the commonly used 1:2 formulation. We combine pulsed-field-gradient (PFG) diffusion, fast-field-cycling (FFC) relaxometry, temperature-dependent 13 C T 1 , and nuclear Overhauser effect spectroscopy (NOESY) to disentangle local from macroscopic dynamics. PFG and FFC show that both translational and average rotational motions largely track the strong increase in viscosity with ChCl content, with ethylene glycol consistently diffusing faster than the choline cation and no global dynamical anomaly at the eutectic composition. More subtle, site-specific composition effects nevertheless emerge. The ratio of the diffusion coefficient of the hydroxyl group of choline to the diffusion coefficient of the methyl group of choline displays a shallow minimum in the 17–25 mol % region, indicating a modest change in how the hydroxyl-bearing end of choline samples the underlying translational motion relative to the methyl groups. 13 C T 1 analysis shows that rotational correlation times at 25 °C generally increase with ChCl, reflecting viscosity-coupled slowing, while the CH 2 –N α site exhibits a small but reproducible deviation from this monotonic trend near the eutectic. NOESY spectra at similar compositions reveal enhanced cross-relaxation between EG and choline protons, consistent with increased headgroup–solvent contact density rather than a wholesale structural rearrangement. Overall, our multitechnique study demonstrates that EG–ChCl dynamics are predominantly viscosity-dominated, with the eutectic region acting as a subtle dynamical crossover where specific choline segments become maximally coupled to the hydrogen-bond network. These insights refine the structure–dynamics picture of choline-chloride DESs and provide practical guidance for tuning composition in electrochemical, separation, and catalytic applications.

diffusion↗
DOE OSTI2023

Influence of Charge Block Length on Conformation and Solution Behavior of Polyampholytes

In this paper, we investigate the effect of charge block length on polyampholyte chain conformation and phase behavior using small-angle X-ray scattering (SAXS) and implicit-solvent molecular simulations. To this end, we use solid phase peptide synthesis to precision-tailor a series of polyampholytes consisting of l-glutamic acid (E) and l-lysine (K) monomers arranged in alternating blocks from 2 to 16 monomers. We observe that the polyampholytes tend to phase separate as block size increases. With addition of NaCl, phase separated polyampholytes exhibit a salting-in effect dependent on charge block length. Fourier-transform infrared (FTIR) spectroscopy reveals the presence of intramolecular hydrogen bonds that are disrupted upon the addition of NaCl, implicating both electrostatic interactions and hydrogen bonding in the phase behavior. SAXS spectra at no-added salt conditions show minimal dependence of charge block length on the radius of gyration (R g ) for soluble polyampholytes, but local chain stiffening is found to be dependent on charge block length. With increasing NaCl, consistent with electrostatic screening, all polyampholytes expand and behave as neutral or swollen chains in good solvent conditions. Molecular simulations are qualitatively consistent with experiments. Implications for understanding intracellular condensates and material design are noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ultradynamic Isoreticularly Expanded Porous Organic Crystals

Porous organic materials showcasing large framework dynamics present new paths for adsorption and separation with enhanced capacity and selectivity beyond the size-sieving limits, which is attributed to their guest-responsive sorption behaviors. Porous hydrogen-bonded crosslinked organic frameworks (H C OFs) are attractive for their remarkable ability to undergo guest-triggered expansion and contraction facilitated by their flexible covalent crosslinkages. However, the voids of H C OFs remain limited, which restrains the extent of the framework dynamics. Here in this work, we synthesized a series of H C OFs characterized by unprecedented size expansion capabilities induced by solvents. These H C OFs were constructed by isoreticularly co-crystallizing two complementary sets of hydrogen bonding building blocks to generate porous molecular crystals, which were crosslinked through thiol–ene/yne single-crystal-to-single-crystal transformations. The generated H C OFs exhibit enhanced chemical durability, high crystallinity, and extraordinary framework dynamics. For instance, H C OF-104 crystals featuring a pore diameter of 13.6 Å expanded in DMF to 300 ± 10% of their original lengths within just 1 min. This expansion allows the HCOFs to adsorb guest molecules that are significantly larger than the pore sizes of their crystalline states. Through methanol-induced contraction, these large guests were encapsulated in the fast-contracted H C OFs. These advancements in porous framework dynamics pave the way for new methods of encapsulating guests for targeted delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrochemically mediated disproportionation for selective formaldehyde upcycling in acid

Formaldehyde (FA) electrolysis is attractive for paired production of value‑added chemicals. However, conventional electrolysis adopts alkaline electrolytes, which triggers FA self-disproportionation and severe feed loss. Here we introduce a sustainable and selective strategy for valorizing FA through electrochemically mediated disproportionation in acidic electrolytes. By leveraging a dual-electrode system consisting of a hydrophobic copper tetraminophthalocyanine layer (CuTAPc-layer) cathode and a Pt 2 Ru bimetallic anode, we efficiently convert FA into methanol and formic acid at high Faradaic efficiencies of 93.2% and 91.3%, respectively. Compared with alkaline FA oxidation, which can lose up to 76% FA and complicate downstream separation, the acidic system suppresses side reactions to ensure high product purity. Mechanism studies reveal that the hydrophobic microenvironment of CuTAPc-layer suppresses hydrogen evolution, while the stronger oxophilicity of Pt 2 Ru enhances FA activation and lowers the key deprotonation barrier for FA oxidation. The integrated device demonstrates application potential in polyoxymethylene upgrading, delivering 374.2 mA at 4 V with ~90% single-pass conversion, establishing a scalable and eco-friendly electrochemical pathway for chemical upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Orientation-dependent enhanced ionization in acetylene revealed by ultrafast cross-polarized pulse pairs

We investigate the orientation dependence of enhanced ionization (EI) during strong-field-driven nuclear motion in acetylene (C 2 ⁢H 2 ). Here, we both initiate and probe molecular dynamics in acetylene with intense 6-fs cross-polarized pulse pairs, separated by a variable delay. Following multiple ionization by the first pulse, acetylene undergoes simultaneous elongation of the carbon-carbon and carbon-hydrogen bonds, enabling further ionization by the second pulse and the formation of a very highly charged state, [C 2 ⁢H 2 ] 6+ . At small interpulse delays (< 20 fs), this enhancement occurs when the molecule is aligned to the probe pulse. Conversely, at large delays (> 40 fs), formation of [C 2 ⁢H 2 ] 6+ occurs when the molecule is aligned to the pump pulse. By analyzing the polarization and time dependence of sequentially ionized [C 2 ⁢H 2 ] 6+ , we resolve two transient alignments that both contribute to a large increase in the multiple ionization yield. In conclusion, this cross-polarized pulse pair scheme uniquely enables selective probing of deeply bound orbitals, providing new insights on orientation-dependent EI in highly charged hydrocarbons.

Atomic & molecular clusters↗