Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Effect of Si/Al ratio of ZSM-5 support on structure and activity of Mo species in methane dehydroaromatization

The effect of the Si/Al ratio of the ZSM-5 support on the structure and activity of Mo/HZSM-5 catalysts in methane dehydroaromatization (MDA) was studied. ZSM-5 (with Si/Al = 15, 25, and 40) supported Mo oxide catalysts (MoOx/ZSM-5) with 3 and 10 wt% Mo loading were prepared by incipient wetness impregnation followed by calcination in air at 500 °C. The as-prepared catalysts were activated by temperature programmed reduction in hydrogen in order to maximize Mo dispersion. To understand the structure-activity relationship, the fresh and spent samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2 adsorption isotherms, Scanning Transmission Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (STEM-EDS), X-ray absorption spectroscopy (EXAFS and XANES), thermogravimetric analysis (TGA), and Raman spectroscopy. The results show that the Si/Al ratio does not influence the the local structure around the Mo centers. It does however affect the number of available Brønsted acid sites in the support and the amount of Mo species entering the zeolite channels. A lower Si/Al ratio and higher Mo loading resulted in a higher Mo occupation within the zeolite channels. The higher channel occupation directly correlated with higher benzene selectivity and yield, as well as a lower catalyst deactivation rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, microstructure and reducibility of LaNi{sub x}Co{sub 1-x}O{sub 3} and LaFe{sub x}Co{sub 1-x}O{sub 3} Perovskites (0<x<=0.5)

Nickel and iron substituted LaCoO{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 deg. C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo{sub 1-x}Ni{sub x}O{sub 3} perovskites (x>0.1) annealed at 900 deg. C are reduced to Co/Ni transition metal and La{sub 2}O{sub 3} via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo{sub 1-x}Ni{sub x}O{sub 3} annealed at 600 deg. C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} occurs by reduction of Co{sup 3+} to Co{sup 2+} prior to the Fe{sup 3+} ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites. - Graphical abstract: LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried La-Co/Ni(Fe)-citrates and by the Pechini method. The complete reduction of LaCo{sub 1-x}Ni{sub x}O{sub 3} with H{sub 2} proceeds to Co/Ni-metal and La{sub 2}O{sub 3}, while the interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} is not complete up to 700 deg. C. For LaCo{sub 1-x}Fe{sub x}O{sub 3}, the reaction proceeds by preferential oxidation of Co{sup 3+} to Co{sup 2+} without affecting Fe{sup 3+} ions.

36 MATERIALS SCIENCE↗

Effect of Ce/Zr molar ratio on the performance of Cu–Ce{sub x}–Zr{sub 1−x}/TiO{sub 2} catalyst for selective catalytic reduction of NO{sub x} with NH{sub 3} in diesel exhaust

Graphical abstract: The Cu–Ce{sub 0.25}–Zr{sub 0.75}/TiO{sub 2} catalyst exhibited excellent SCR activity at 165–450 °C within the range of exhaust temperatures of diesel engines. - Highlights: • Cu–Ce{sub x}–Zr{sub 1−x}/TiO{sub 2} catalysts were prepared by a wet impregnation method. • The property for NH{sub 3}-selective catalytic reduction of NO{sub x} were investigated. • The Ce/Zr molar ratio had effects on the performance of Cu–Ce–Zr/TiO{sub 2} catalysts. • The Cu–Ce{sub 0.25}–Zr{sub 0.75}/TiO{sub 2} sample exhibited 100% NO{sub x} conversion between 165 °C and 450 °C. • The factors that govern the activity enhancement were extensively investigated. - Abstract: Copper–cerium–zirconium catalysts loaded on TiO{sub 2} prepared by a wet impregnation method were investigated for NH{sub 3}-selective catalytic reduction of NO{sub x}, aiming to study the effects of the Ce/Zr molar ratio on the performance of Cu–Ce–Zr/TiO{sub 2} catalysts. The Cu–Ce{sub 0.25}–Zr{sub 0.75}/TiO{sub 2} sample exhibited nearly 100% NO{sub x} conversion over a wide temperature range (165–450 °C), which is strikingly superior to that of Cu/TiO{sub 2} (210–389 °C) within the range of exhaust temperatures of diesel engines. The factors that govern the activity enhancement were extensively investigated by using a series of characterization techniques, namely X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature-programmed reduction by hydrogen (H{sub 2}-TPR). The results showed that the addition of zirconium and/or cerium refined the copper dispersion, prevented copper crystallization and partially incorporated the copper ions into the zirconia (ceira) lattice, which led to enhance the redox abilities of Cu–Ce–Zr/TiO{sub 2} catalysts.

36 MATERIALS SCIENCE↗

Controlled synthesis of α-MnO{sub 2} nanowires and their catalytic performance for toluene combustion

Highlights: • One-dimensional α-MnO{sub 2} nanowires were prepared by a facile hydrothermal route. • Shape and crystal phase of the products were controlled by tuning reaction conditions. • A possible formation mechanism of the α-MnO{sub 2} nanowires was discussed. • The α-MnO{sub 2} nanowires showed great catalytic activity for toluene combustion. - Abstract: α-MnO{sub 2} nanowires with a length about 6–10 μm and an average diameter of 20 nm were synthesized through a facile hydrothermal process without any templates or surfactants. The products were characterized by X-ray powder diffraction, Raman spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, hydrogen temperature-programmed reduction techniques, X-ray photoelectron spectroscopy and surface area analysis. The effects of the hydrothermal temperature and the concentration of CH{sub 3}COOH on the crystal phase and morphology of the final products were studied in detail. The hydrothermal temperature and the concentration of CH{sub 3}COOH play crucial roles in determining the crystal phase and morphology of the products. The possible formation mechanism of the α-MnO{sub 2} nanowires was investigated and discussed. Additionally, the as-prepared α-MnO{sub 2} nanowires showed higher catalytic activity for toluene combustion than the commercial MnO{sub 2}, suggesting their potential applications in the elimination of volatile organic compounds.

36 MATERIALS SCIENCE↗

Manganese Oxide Nanoarray-Based Monolithic Catalysts: Tunable Morphology and High Efficiency for CO Oxidation

In this work, a generic one-pot hydrothermal synthesis route has been successfully designed and utilized to in situ grow uniform manganese oxide nanorods and nanowires onto the cordierite honeycomb monolithic substrates, forming a series of nanoarray-based monolithic catalysts. During the synthesis process, three types of potassium salt oxidants have been used with different reduction potentials, i.e., K 2 Cr 2 O 7 , KClO 3 , and K 2 S 2 O 8 , denoted as HM-DCM, HM-PCR, and HM-PSF, respectively. The different reduction potentials of the manganese source (Mn 2+ ) and oxidants induced the formation of manganese oxide nanoarrays with different morphology, surface area, and reactivity of carbon monoxide (CO) oxidation. K 2 Cr 2 O 7 and KClO 3 can induce sharp and long nanowires with slow growth rates due to their low reduction potentials. In comparison, the nanoarrays of HM-PSF presented shorter nanorods but displayed an efficient 90% CO oxidation conversion at 200 °C (T90) without noble-metal loading. Reducibility tests for the three monolithic catalysts by hydrogen temperature-programmed reduction revealed an activation energy order of HM-PSF > HM-DCM > HM-PCR for CO oxidation. The characterizations of oxygen temperature-programmed desorption and X-ray photoelectron spectroscopy indicated the abundant surface-adsorbed oxygen and lattice oxygen contributing to the superior reactivity of HM-PSF. Finally, the straightforward synthetic process showed a scalable, low-cost, and template-free method to fabricate manganese oxide nanoarray monolithic catalysts for exhaust treatment.

36 MATERIALS SCIENCE↗

Sulfur Tolerant Subnanometer Fe/Alumina Catalysts for Propane Dehydrogenation

A series of Al 2 O 3 -supported Fe-containing catalysts were synthesized by incipient wetness impregnation. The iron surface density was varied from 1 to 13 Fe atoms/nm 2 spanning submonolayer to above-monolayer coverage. Here, the resulting supported Fe-catalysts were characterized by N 2 physisorption, ex situ X-ray diffraction (XRD), X-ray pair distribution function (PDF), X-ray absorption spectroscopy (XAS), aberration corrected scanning transmission electron microscopy (AC-STEM) and chemically probed by hydrogen temperature-programmed reduction (H 2 -TPR). The results suggest that over this entire range of loadings, Fe was present as dispersed species, with only a very small fraction of Fe 2 O 3 aggregates, at the highest Fe loading in oxide phase. The in situ sulfidation of Fe/Al 2 O 3 resulted in the formation of a highly active and selective PDH catalyst. The highest activity with 52% propane conversion and ~99% propylene selectivity at 560 °C was obtained for the 6.4 Fe/Al 2 O 3 -S catalyst, suggesting that this is the highest amount of Fe that could be fully dispersed on the support in sulfided form. XRD and AC-STEM indicated the absence of any crystalline iron sulfide aggregates after sulfidation and reaction. H 2 -TPR results indicated that the amount of the reducible Fe sites in the sulfided catalyst remained constant above monolayer coverage, and increasing loading did not increase the number of reducible Fe sites. Consistent with these results, the reactivity per gram of catalyst showed no increase with Fe loading above monolayer coverage, suggesting that additional Fe remains conformal to the alumina surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Sodium on the Catalytic Properties of VOx/CeO2 Catalysts for Oxidative Dehydrogenation of Methanol

A series of VOx/CeO2 catalysts with various sodium loadings (Na/V ratio from 0 to 1) has been studied for oxidative dehydrogenation (ODH) of methanol. The effect of sodium on the surface structure, redox properties, and surface acidity/basicity of VOx/CeO2 was investigated using hydrogen temperature-programmed reduction (H2-TPR), Raman spectroscopy, and Diffuse Reflectance Infrared Fourier Transform spectroscopy (DRIFT). The experimental results indicate that the effect of sodium on VOx/CeO2 is highly dependent on the Na/V ratio. At a low Na/V ratio (Na/V<0.25), sodium addition only slightly decreases the redox properties of VOx/CeO2 and has little effect on its activity and selectivity to formaldehyde, even though the Brönsted acidity is almost completely eliminated at a Na/V ratio of 0.25. At a high Na/V ratio (Na/V>0.25), sodium addition greatly alters the nature of the active sites by V-O-Ce bond cleavage and V-O-Na bond formation, leading to significantly reduced activity of the VOx/CeO2 catalysts. At Na/V>0.25, the selectivity to formaldehyde also decreases with increasing Na/V ratio due to: (1) the suppressed reducibility of VOx, and (2) increased basicity leading to increased CO2.

Environmental Molecular Sciences Laboratory↗

Metallic and complex hydride-based electrochemical storage of energy

Abstract The development of efficient storage systems is one of the keys to the success of the energy transition. There are many ways to store energy, but among them, electrochemical storage is particularly valuable because it can store electrons produced by renewable energies with a very good efficiency. However, the solutions currently available on the market remain unsuitable in terms of storage capacity, recharging kinetics, durability, and cost. Technological breakthroughs are therefore expected to meet the growing need for energy storage. Within the framework of the Hydrogen Technology Collaboration Program—H 2 TCP Task-40, IEA’s expert researchers have developed innovative materials based on hydrides (metallic or complex) offering new solutions in the field of solid electrolytes and anodes for alkaline and ionic batteries. This review presents the state of the art of research in this field, from the most fundamental aspects to the applications in battery prototypes.

Cuevas, Fermin (ORCID:0000000290555880)↗

Advanced Hydrogen Turbine Development

Under the sponsorship of the U.S. Department of Energy (DOE) National Energy Technology Laboratories, Siemens has completed the Advanced Hydrogen Turbine Development Program to develop an advanced gas turbine for incorporation into future coal-based Integrated Gasification Combined Cycle (IGCC) plants. All the scheduled DOE Milestones were completed and significant technical progress was made in the development of new technologies and concepts. Advanced computer simulations and modeling, as well as subscale, full scale laboratory, rig and engine testing were utilized to evaluate and select concepts for further development. Program Requirements of: A 3 to 5 percentage point improvement in overall plant combined cycle efficiency when compared to the reference baseline plant; 20 to 30 percent reduction in overall plant capital cost when compared to the reference baseline plant; and NOx emissions of 2 PPM out of the stack. were all met. The program was completed on schedule and within the allotted budget

42 ENGINEERING↗

Investigations of Relative Stability and Distribution of Mo Species in Pore Space of Mo/ZSM-5 Systems

Reduced forms of molybdenum (Mo) carbides anchoring in pore space of zeolites are considered as activated catalysts for the methane dehydroaromatization reaction. However, the atomic structure of the active sites and their stability under reactive conditions are still not clearly understood. Herein, we employ a synergistic theoretical and experimental approach to investigate this research gap. The Raman data shows the existence of the distributed binuclear and mononuclear Mo oxides in the pores that are corroborated by the hydrogen temperature-programmed reduction experiments. The binding free energies of mono- and bi-nuclear Mo carbides in straight and sinusoidal channels and their intersections as a function of temperature and anchoring sites have been determined. The catalysts with Mo coordinated at two anchoring sites are more stable compared to those located at the rings with one Al substitution. The activation energies of the catalysts migration to adjacent rings were estimated as a function of temperature and kinetics parameters of such migrations were determined. The migration is facilitated if there is one anchoring site shared between two rings. This process can contribute to an agglomeration mechanism leading to loss of catalytic activity.

Myshakin, Evgeniy↗

Development of a Power Metallurgy Superalloy for Use at 1800-2000 F (980-1090 C)

A program was conducted to develop a powder metallurgy nickel-base superalloy for 1800-2000 F (980-1090 C) temperature applications. The feasibility of a unique concept for alloying carbon into a superalloy powder matrix and achieving both grain growth and a discrete particle grain boundary carbide precipitation was demonstrated. The process consisted of blending metastable carbides with a carbon free base alloy and consolidating this blend by hot extrusion. This was followed by heat treatment to grow a desired ASTM No. 2-3 grain size and to solution the metastable carbides to allow precipitation of discrete particle grain boundary carbides during subsequent aging heat treatments. The best alloy developed during this program was hydrogen-atomized, thermal-mechanically processed, modified MAR-M246 base alloy plus VC (0.28 w/o C). Although below those for cast MAR-M246, the mechanical properties exhibited by this alloy represent the best combination offered by conventional powder metallurgy processing to date.

Kortovich, C. S.↗

Observations of 1.3 millimeter continuum emission from the centers of galaxies

A search for 1.3 mm continuum emission from the centers of eight galaxies has been conducted, and three sources of emission, all apparently arising from cold dust, have been detected. The gas mass associated with this dust is calculated. A rough correlation found between the J = 1-0 CO emission and the millimeter continuum flux, as well as a fair agreement between the masses determined from the two types of observation, support the view that the cool dust is mixed with the molecular material in the program objects. Atomic hydrogen masses estimated for the same cources from 21 cm line observations show that there is little H I in the objects. Most of the objects form stars at about the same efficiency as does the Galaxy.

Thronson, Harley A., Jr.↗

Air Force NiH2 IPV storage testing

USAF Phillips Laboratory Nickel Hydrogen IPV storage test, performed at the Naval Surface Warfare Center (NSWC) at Crane Indiana, is discussed. The storage tests is just one component of the USAF Phillips Laboratory Nickel Hydrogen IPV Test Program. The plan was to store cells for a defined period and cycle matching cells to determine the effect on cycle life. The storage period was completed in April 95 and the cycling cells have achieved five years of real time LEO cycling. The two main objectives of the storage test are: to investigate various methods on NiH2 cells by using two different manufacturers and two different storage methods or conditions, and to determine the effect of storage method on cycle performance and cycle life by using matching cells cycling at 25% depth of discharge. The comparisons between individual cycle performance as well as cycle life are also reported. During the test the following variables has been considered: constant potential, cell current, open circuit voltage, and temperature. The results of the test are also discussed using charts and tables.

Smellie, Shawn↗

Development of a Portable Stand-Alone 20 K Brayton Cycle Helium Refrigeration System

From 2012 to 2015, NASA funded development of the Ground Operations Demonstration Unit for Liquid Hydrogen (GODU-LH2) at Kennedy Space Center that scaled up and matured Integrated Refrigeration and Storage (IRAS) technology. IRAS involves the integration of an external helium refrigeration system with a cryogenic storage tank via an internal heat exchanger and allows advanced operations such as zero boiloff and densification of the liquid. The refrigeration system employed for GODU-LH2 was a Linde LR1620 piston-Brayton cycle machine with an RSX helium compressor. The GODU-LH2 system was installed in two separate shipping containers—one housing the cold-box, compressor, and gas management hardware, and the other the water chiller unit—with 480 VAC and 120 VAC electrical power fed from external hardware at the test site, and data capture and controls achieved using four different, independent software packages. From 2017 to 2019, in support of a densified hydrogen loading test program, the entire system was repackaged into a single, 40’ (12 m) shipping container, including the refrigeration system, water chiller, and electrical power distribution hardware, and controls were consolidated into a single Allen Bradley PanelView. Details regarding the design, build-out, and testing of the system will be presented and discussed.

W F Reaves↗

Hydrogen Safety Training for Researchers

LLNL has been conducting hydrogen research for more than 50 years, starting with national security applications and continuing with hydrogen energy research. For many of these years, LLNL was designated as the pressure safety training facility for the whole DOE complex and other government institutions such as NASA. Many technicians and researchers visited LLNL to receive appropriate training on many aspects of pressure safety, including hydrogen technology, cryogenics, leak detection, and vacuum technology. The national security hydrogen and high-pressure research conducted at LLNL demanded unique testing facilities, and these were built with funding from DOE Defense Programs. These facilities include a high pressure laboratory equipped with 4 hydrogencompatible test cells, each rated for 80,000 psi, and 4 pounds of TNT equivalent stored energy. LLNL also has a high explosive test facility (Site 300) for high-energy experiments with many pounds of TNT equivalent and many kilograms of hydrogen. Experiments in Site 300 are typically conducted in outdoor firing tables and monitored from the safety of a bunker. The remote location of this facility protects employees and property from any hazard. These unique facilities and the expertise necessary to operate them are now being made available for hydrogen energy research through the development of training materials that may contribute to safe operation within the many institutions working for the hydrogen program.

08 HYDROGEN↗

Internship at NASA Kennedy Space Center's Cryogenic Test laboratory

NASA's Kennedy Space Center (KSC) is known for hosting all of the United States manned rocket launches as well as many unmanned launches at low inclinations. Even though the Space Shuttle recently retired, they are continuing to support unmanned launches and modifying manned launch facilities. Before a rocket can be launched, it has to go through months of preparation, called processing. Pieces of a rocket and its payload may come in from anywhere in the nation or even the world. The facilities all around the center help integrate the rocket and prepare it for launch. As NASA prepares for the Space Launch System, a rocket designed to take astronauts beyond Low Earth Orbit throughout the solar system, technology development is crucial for enhancing launch capabilities at the KSC. The Cryogenics Test Laboratory at Kennedy Space Center greatly contributes to cryogenic research and technology development. The engineers and technicians that work there come up with new ways to efficiently store and transfer liquid cryogens. NASA has a great need for this research and technology development as it deals with cryogenic liquid hydrogen and liquid oxygen for rocket fuel, as well as long term space flight applications. Additionally, in this new era of space exploration, the Cryogenics Test Laboratory works with the commercial sector. One technology development project is the Liquid Hydrogen (LH2) Ground Operations Demonstration Unit (GODU). LH2 GODU intends to demonstrate increased efficiency in storing and transferring liquid hydrogen during processing, loading, launch and spaceflight of a spacecraft. During the Shuttle Program, only 55% of hydrogen purchased was used by the Space Shuttle Main Engines. GODU's goal is to demonstrate that this percentage can be increased to 75%. Figure 2 shows the GODU layout when I concluded my internship. The site will include a 33,000 gallon hydrogen tank (shown in cyan) with a heat exchanger inside the hydrogen tank attached to a refrigerator capable of removing 850 Watts at 20 Kelvin (shown in green). The refrigerator and most of its supporting equipment will be kept in a standard shipping container (shown in pink). Currently, GODU is in the fabrication process and some of the large components have already been purchased.

Holland, Katherine↗