Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hot spot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A mechanism for reduced compression in indirectly driven layered capsule implosions

High-yield implosions on the National Ignition Facility rely on maintaining low entropy in the deuterium–tritium fuel, quantified by its adiabat, in order to efficiently couple energy to the hot spot through high compression of the fuel layer. We present very-high-resolution xRAGE simulation results that study the impacts of interfacial mixing and the jetting of materials due to surface defects, defects on internal interfaces, voids, and engineering features on fuel layer compression. Defects and voids are typically neglected in implosion simulations due to their small size and three-dimensional geometry. Our results showed that supersonic jets of material arise through weak spots in the shell at peak implosion velocity that prevent uniform compression of the fuel layer even when they do not introduce contaminant into the hot spot. This occurs despite maintaining low fuel entropy, since the formation of the weak spots involves nonradial displacement of fuel mass. In contrast, simulations show that fuel–ablator mixing due to interfacial instabilities has a much smaller impact on compression. We show that defects on interior interfaces of plastic capsules decrease compression by 15% to 25% and interfacial mixing between the ablator and fuel decreases compression by less than 1% for implosions with plastic or high-density carbon (HDC) ablators. For low adiabat implosions, the impact of jetting seeded by the support tent can also decrease the compression by 25%. We demonstrate that the inclusion of interior defects in simulations can explain the inferred compression in two fielded plastic capsule implosions and that the inclusion of voids, for which available characterization has large uncertainties, in simulations of HDC capsule implosions has a qualitatively consistent impact. This mechanism offers a potential explanation for persistently overestimated fuel compression in design simulations of layered implosions on the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

SMART conductor on round core (CORC ® ) wire via integrated optical fibers

Superconducting cables based on high temperature superconductors (HTS) are necessary for applications requiring large currents and low inductance, such as compact fusion reactors. In this paper, we report the proof-of-concept of a SMART Conductor on Round Core (CORC ® ) wire realized via integration of optical fibers into the copper core. A SMART CORC ® wire with integrated optical fibers was manufactured and its capabilities have been experimentally demonstrated. Results show that by interrogating the optical fibers via Rayleigh backscattering, a Spectral Shift signal as a function of time and position along the cable can be used to detect and locate hot-spots that are developed within the wire or its terminations. It has been found that highly localized current injection into the terminations could initiate hot-spots within the cable at locations where current redistribution between tapes occur. This effect is virtually eliminated when adequate current connections are used that inject current evenly along the cable terminations. Normal zone propagation velocities have been calculated as a function of time using Spectral Shift data for a heater-induced quench as well as a quench induced by overcurrent. In both cases the normal zone propagation velocity was about 6 cm s -1 , but in the heater-induced experiment it was preceded by 500 ms of slower propagation at 2.5 cm s -1 .

Physics↗
NASA NTRS1973

Infrared atlas charts of the eclipsed moon.

The objective of this atlas is to present the thermal response of the lunar surface observed during an eclipse of the moon with accurate position data. The observations were made at a wavelength of 11 microns with an angular resolution of 10 sec, equivalent to 17 km at the disk center. Over a thousand thermally anomalous regions (hot spots) were detected. They cool more slowly than their environs and remain warmer than their environs during the umbral phase. In addition to these very localized hot spots, some of the maria show thermal enhancements during the eclipse. Fourty four charts make up this atlas which are identical in coverage and projection to the Lunar Atlas Charts (LAC) series. The charts are in the form of digital images of a normalized temperature difference which is particularly useful for studying regions of small thermal enhancements. Each increase of intensity corresponds to a 4 K temperature increase.

Shorthill, R. W.↗
NASA NTRS2001

Magnetospheric Geometry in PSR B1929+10 from Radio/X-Ray Alignment

We have conducted a study of two rotation- powered pulsars that emit at both radio and x-ray wavelengths, PSR B0531+21 and PSR B1929+10. Using absolute phase information, we have phase-aligned x-ray and radio profiles from these pulsars. Observations were done using the Green Bank 140ft telescope, and ASCA. The 0531+21 X-ray profile is sharp and lines up well with the radio profile confirming that the X-ray emission from this pulsar is magnetospheric in origin. The 1929+10 profile is approximately sinusoidal with the peak of the emission arriving 67+/-23 degrees after the maximum in the radio emission. The controversy to which the PSR B1929+10 result adds fuel, is whether this "inter" -pulsar, is an "aligned" or "orthogonal" rotator -- describing the alignment of the magnetic axis to the rotation axis. Do the two peaks in the radio profile (the pulse and interpulse) come from a double crossing of a thin hollow cone nearly aligned with rotation axis, or alternatively do they come from from opposite poles of an "orthogonal" rotator where the spin axis is perpendicular to the magnetic axis? The radio to X-ray alignment we find favors the former explanation: if the X-ray hot spot is the result of return currents to the surface from the outward current that generates radio emission, then in the "double-crossing" model, the hot spot phase is expected to lie between the main pulse and interpulse as observed.

Somer, A. L.↗
NASA NTRS2002

Shear Instabilities as a Probe of Jupiter's Atmosphere

Linear wave patterns in Jupiter clouds with wavelengths strongly clustered around 300 km are commonly observed in the planet's equatorial atmosphere. We propose that the preferred wavelength is related to the thickness of an unstable shear layer within the clouds. We numerically analyze the linear stability of wavelike disturbances that have nonzero horizontal phase speeds in Jupiter's atmosphere and find that. if the static stability in the strongly clustered around 300 km are commonly observed in the planet's equatorial atmosphere. We propose that the preferred wavelength is related to the thickness of an unstable shear layer within the clouds. We numerically analyze the linear stability of wavelike disturbances that have nonzero horizontal phase speeds in Jupiter's atmosphere and find that. if the static stability in the shear layer is very low (but still nonnegative), a deep vertical shear layer like the one measured by the Galileo probe can generate the instabilities. The fastest growing waves grow exponentially within an hour, and their wavelengths match the observations. Close to zero values of static stability that permit the growth of instabilities are within the range of values measured by the Galileo probe in a hot spot. Our model probes Jupiter's equatorial atmosphere below the cloud deck and suggests that thick regions of wind shear and low static stability exist outside hot spots.

Bosak, Tanja↗
DOE OSTI2024

A Physical Metric for Inertial Confinement Fusion Capsules

The performance of fusion capsules on the National Ignition Facility (NIF) is strongly affected by the physical properties of the hot deuterium–tritium (DT) fuel, such as the mass, areal density, and pressure of the hot spot at the stagnation time. All of these critical quantities depend on one measured quantity, which is the ratio of the specific peak implosion energy to the specific internal energy of the hot spot. This unique physical quantity not only can measure the incremental progress of the inertial confinement fusion capsules towards ignition but also measures the conversion of the peak implosion kinetic energy of the pusher shell into the internal energy of the hot fuel in a capsule. Analysis of existing NIF shots to date are performed. The ratio metric is compared quantitatively with the ignition criterion. Results provide new perspectives on the NIF experiments by which the performance of the burning plasma can be determined and controlled through the fine tune of the implosion parameters, which improves future designs and predictions of the ignition capsules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Statistical data analysis of x-ray spectroscopy data enabled by neural network accelerated Bayesian inference

Bayesian inference applied to x-ray spectroscopy data analysis enables uncertainty quantification necessary to rigorously test theoretical models. However, when comparing to data, detailed atomic physics and radiation transfer calculations of x-ray emission from non-uniform plasma conditions are typically too slow to be performed in line with statistical sampling methods, such as Markov Chain Monte Carlo sampling. Furthermore, differences in transition energies and x-ray opacities often make direct comparisons between simulated and measured spectra unreliable. Here, we present a spectral decomposition method that allows for corrections to line positions and bound–bound opacities to best fit experimental data, with the goal of providing quantitative feedback to improve the underlying theoretical models and guide future experiments. In this work, we use a neural network (NN) surrogate model to replace spectral calculations of isobaric hot-spots created in Kr-doped implosions at the National Ignition Facility. The NN was trained on calculations of x-ray spectra using an isobaric hot-spot model post-processed with Cretin, a multi-species atomic kinetics and radiation code. The speedup provided by the NN model to generate x-ray emission spectra enables statistical analysis of parameterized models with sufficient detail to accurately represent the physical system and extract the plasma parameters of interest.

47 OTHER INSTRUMENTATION↗
NASA NTRS1980

Polar cloud structure as derived from the Pioneer Venus Orbiter

Vertical absorption coefficient profiles of the Venus clouds in the north polar regions recorded by the Pioneer Venus Orbiter on orbits 9, 18, and 19 at the S band indicate dense cloud decks at the 1.5 to 4.7 bar levels in the Venus atmosphere. These cloud decks are at lower altitudes than the clouds detected by Mariner 10 and Pioneer Venus probes, and are uniform in absorption characteristics in the polar regions. The regions close to the polar hot spots have depressed the upper cloud heights and increased polar density; these areas are free of thermal inversions characteristic of the north polar regions away from the hot spots.

Cimino, J. B.↗
DOE OSTI2020

Mixing in ICF implosions on the National Ignition Facility caused by the fill-tube

The micrometer-scale tube that fills capsules with thermonuclear fuel in inertial confinement fusion experiments at the National Ignition Facility is also one of the implosion's main degradation sources. It seeds a perturbation that injects the ablator material into the center, radiating away some of the hot-spot energy. This paper discusses how the perturbation arises in experiments using high-density carbon ablators and how the ablator mix interacts once it enters the hot-spot. Both modeling and experiments show an in-flight areal-density perturbation and localized x-ray emission at stagnation from the fill-tube. Simulations suggest that the fill-tube is degrading an otherwise 1D implosion by ~2×, but when other degradation sources are present, the yield reduction is closer to 20%. Characteristics of the fill-tube assembly, such as the through-hole size and the glue mass, alter the dynamics and magnitude of the degradation. Overall, these aspects point the way toward improvements in the design, some of which (smaller diameter fill-tube) have already shown improvements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

The plumes of IO: A detection of solid sulfur dioxide particles

Spectra of Io obtained during eclipse show a narrow deep absorption feature at 4.871 microns, the wavelength of the Nu sub 1 + Nu sub 3 band of solid SO2. The 4 micron radiation comes from volcanic hot spots at a temperature too high for the existence of solid SO2. It is concluded that the spectral feature results from SO2 particles suspended in plumes above the hot spots. The derived abundance of approximately 0.0003 gm/sq cm may imply an SO2 solid-to-gas ratio of roughly one for the Loki plume, which would in turn suggest that it is driven by the SO2 rather than by sulfur.

Howell, R. R.↗
DOE OSTI2022

Extensions of a classical mechanics “piston-model” for understanding the impact of asymmetry on ICF implosions: The cases of mode 2, mode 2/1 coupling, time-dependent asymmetry, and the relationship to coast-time

As long suspected, low mode asymmetry in inertially confined fusion (ICF) implosions has been implicated as a performance limiting factor [Casey et al., “Evidence of three-dimensional asymmetries seeded by high-density carbon-ablator nonuniformity in experiments at the national ignition facility,” Phys. Rev. Lett. 126, 025002 (2021)]. Recently a non-linear, but solvable, theory [Hurricane et al., “An analytic asymmetric-piston model for the impact of mode-1 shell asymmetry on ICF implosions,” Phys. Plasmas 27, 062704 (2020)] based upon the simple picture of a pair of asymmetric pistons has generated new insights and provided some practical formulas for estimating the degradation of an implosion due to mode-1 asymmetry and demonstrated a previously unrecognized connection between measured hot-spot drift velocity, nuclear down-scatter ratio asymmetry, and the concept of residual kinetic energy (RKE). Asymmetry of the implosion “shell,” as opposed to asymmetry of the hot-spot, was key to the classical mechanics model because the majority of the kinetic energy in an implosion is carried by the shell. Herein, the two-piston model is extended to a six-piston model in order to capture mode-2 asymmetry and coupling between mode-1 and mode-2. A key result of this new six-piston model is that the weighted harmonic mean of shell areal density is the fundamental quantity that determines the RKE and performance degradations for a three-dimensional implosion. Agreement is found between the scalings coming from the theory and ICF implosion data from the National Ignition Facility and to large ensembles of detailed simulations. The connection between the piston model's dependence upon the radius of peak velocity and coast-time is also highlighted in this paper. Finally, by extending the two-piston model to include time-dependent “swing,” it is shown in the Appendix that the shell asymmetry at the time of stagnation dominates the solution for RKE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2012

NASA Electronic Parts and Packaging (NEPP) Program

Recent Findings from Audits, New Technology Data Reviews a) Disabled Chip Burn-ins A recent audit for a QML device discovered that the chip was disabled during the static burn-in, thus it was not drawing any current. Recommendation: For new SMDs add a statement within the burn-in paragraphs stating that the parts shall be kept in their enabled state during the burn-in. b) Class Q 160-hr/125oC Burn-in This is being interpreted as a static burn-in (even for CMOS technology). Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. c) At Frequency (Dynamic) Burn-ins Test equipment limitation is being cited for not doing burn-ins at the application frequency. Recommendation: The burn-in task group to discuss and provide guidance. When the SMD says that the part can be used at 200 MHz, then doing burn-in at 6 MHz (cited as burn-in equipment limitation frequency) is not going to be meaningful! d) Two Static Burn-ins Some manufacturers are doing electrical testing between the two static burn-ins, whereas others do electricals after completing both static burn-ins. Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. e) Thermal Imaging For a device with hot spots, the thermal resistance, junction-to-case, would be much higher than the guidelines given in MIL-STD-1835. One of the suppliers used thermal imaging to find hot spots on the die. Recommendation: Assign a task group to evaluate the effectiveness of thermal imaging at the product development stage.

Class Y↗
DOE OSTI2021

A pushered capsule implosion as an alternate approach to the ignition regime for inertial confinement fusion

We report in inertial confinement fusion, the threshold for ignition is a highly dynamic quantity as the sources and sinks of power in the hot spot can vary rapidly. In this article, we consider the ignition condition as a race between heating and disassembly rates and make use of a prior solution to the fusion hot-spot thermodynamics to develop a Lawson-like ignition criteria for pressure × confinement time (p-τ) vs temperature. Low-Z capsule designs reach the temperature for this threshold using as much of the shell as feasible as ablator but then are limited in τ by low stagnated mass. An alternate approach, the pushered single shell (PSS) design [D. D.-M. Ho, S. MacLaren, and Y. Wang, “High-yield implosions via radiation trapping and high rho-R,” paper presented at the 60th Annual Meeting of the APS Division of Plasma Physics, 2018], introduces a dense inner layer of Mo-Be alloy that is smoothly graded outward to pure Be, increasing the confinement time at stagnation and lowering the temperature requirement at the ignition threshold. Here, we describe a PSS ignition design for the National Ignition Facility and use the theory as well as simulations to compare it with the low-Z capsule approach. Additionally, we show how an adjustment to the design is used to anticipate the effects of mixing at the fuel–ablator interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Effect of a collapsing gas bubble on the shock-to-detonation transition in liquid nitromethane

We studied the shock-induced collapse of butane gas bubbles in the homogeneous explosive nitromethane (NM) to investigate the effects of hot spot formation on the detonation process. A butane bubble was injected into a sample of NM, and a shock wave from a flat plate impactor compressed the bubble, creating a localized hot spot. We measured shock and detonation wave speeds with optical velocimetry, and we used a high-speed camera to image the shock propagation and bubble collapse processes. A multiband optical fiber pyrometer measured the time-resolved thermal radiance, and we used the results and emissivity values extracted from spectral fits to estimate temperatures. We measured the characteristics of the shock-to-detonation transition in NM with and without a bubble. All experiments were performed at shock pressures near 8 GPa, where neat NM can detonate. A single bubble in this system was shown to sensitize NM, leading to a reduced run-to-detonation time. We used hydrodynamic modeling to predict shock wave propagation, the extent of chemical reaction, and subsequent temperature rise from the collapsing bubble. We used a temperature-dependent Arrhenius burn model for simulations, and it yielded much better results than reactive burn models that depend only on pressure and density.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1985

Classification of Circular Features on Venus

Among the unanswered questions concerning Venus are the age of its surface and the mechanisms of lithospheric heat transfer (conduction, plate recycling, and hot spot volcanism). If there is a large population of impact craters, then the surface is ancient and Venus is characterized by conduction like the Moon, and Mercury, rather than plate recycling and hot spot volcanism. Alternatively, if there is a large population of volcanic craters, then the surface is younger and other mechanisms of heat transfer likely dominate. Previous studies have emphasized various aspects of the observational, theoretical, experimental, and comparative planetological studies of cratering on Venus, and several have reached divergent opinions concerning the age of the Venus surface. A major source of uncertainty in previous studies is the possible inclusion of circular features of nonimpact (volcanic or tectonic) origin in the so called impact crater population. A classification scheme of circular features on Venus is developed in order to further distinguish their origin and distribution.

Stofan, E. R.↗
NASA NTRS1991

Infrared speckle interferometry and spectroscopy of Io

Observations of a series of mutual events of the Galilean satellites occurring in early 1991 are providing high resolution information concerning the volcanic hot spots on Jupiter's moon Io. The brightness of Io is plotted as a function of time as it is occulted by Europa. Voyager derived globes are given and interpreted, giving special attention to observed hot spots.

Howell, Robert R.↗
DOE OSTI2025

Magnetized ICF implosions: non-axial magnetic field topologies

This paper explores four different magnetic field topologies for application to spherical inertial confinement fusion implosions: axial, mirror, cusp and closed field lines. A mirror field is found to enhance the impact of magnetization over an axial field; this is because the mirror field more closely follows the hot-spot surface. A cusp field, while simple to generate, is not found to have any benefits over the tried-and-tested axial field. Closed field lines are found to be of the greatest benefit to hot-spot performance, with the simulated design undergoing a 2× increase in ion temperature before α-heating is considered. The plasma properties of the simulation with closed field lines are radically different from the unmagnetized counterpart, with electron temperatures in excess of 100 keV, suggesting that a fundamental redesign of the capsule implosion is possible if this method is pursued.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2001

Flyby Delivers Multiple Deep Jupiter Probes

In situ probes are the most reliable means for sampling composition and conditions deep in giant planet atmospheres. While exceeding its baseline mission, the Galileo probe entered a distinctly non-representative region of Jupiter (a 'hot spot') and apparently did not measure the full deep abundances of such important species as H2O and H2S, whose measured abundances were still increasing at the deepest datum. Multiple deep (approx. 100 bar) in situ probes minimize the hot spot risk, and address spatial variations and deep constituent abundances. Additional information is contained in the original extended abstract.

Spilker, T. R.↗