Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high resolution microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Preparation and luminescence properties of Mn{sup 2+}-doped ZnGa{sub 2}O{sub 4} nanofibers via electrospinning process

One-dimensional Mn{sup 2+}-doped ZnGa{sub 2}O{sub 4} nanofibers were prepared by a simple and cost-effective electrospinning process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), energy-dispersive X-ray spectrum (EDS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. SEM results indicated that the as-formed precursor fibers and those annealed at 700 deg. C are uniform with length of several tens to hundred micrometers, and the diameters of the fibers decrease greatly after being heated at 700 deg. C. Under ultraviolet excitation (246 nm) and low-voltage electron beams (1-3 kV) excitation, the ZnGa{sub 2}O{sub 4}:Mn{sup 2+} nanofibers presents the blue emission band of the ZnGa{sub 2}O{sub 4} host lattice and the strong green emission with a peak at 505 nm corresponding to the {sup 4}T{sub 1}-{sup 6}A{sub 1} transition of Mn{sup 2+} ion.

36 MATERIALS SCIENCE↗

Multifunctional Zn{sub 0.99-x}Mn{sub 0.01}Cu{sub x}S nanowires: Structure, luminescence and magnetism

The wurtzite-type Zn{sub 0.99-x}Mn{sub 0.01}Cu{sub x}S (x = 0, 0.003, 0.01) nanowires were prepared by a simple hydrothermal method at 180 {sup o}C. The structure and morphology of the samples were characterized by X-ray diffraction (XRD), X-ray absorption fine structure (XAFS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron micrograph (FESEM) and X-ray photoelectron spectrum (XPS). The results showed that both the Mn{sup 2+} and Cu{sup 2+} ions substituted for the Zn{sup 2+} sites in the host ZnS. The ethylenediamine-mediated template was observed, which was used to explain the growth mechanism of the nanowires. The color-tunable emission can be obtained by adjusting the concentrations of Mn{sup 2+} and Cu{sup 2+} ions. The ferromagnetism was observed around room temperature.

36 MATERIALS SCIENCE↗

A facile synthesis of novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU nanocomposite

Novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU (N,N'-dibutylthiourea) nanocomposite were synthesized by reacting CdCl{sub 2} with in situ produced H{sub 2}S from reaction of butylamine and carbon disulfide at molar ratio 3:3 of CS{sub 2}:BuNH{sub 2} at 50 {sup o}C. This product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), energy dispersive X-ray spectroscopy (EDAX), thermogravimetric (TG), Fourier transform infrared (FTIR) and UV-vis absorption spectra. A plausible mechanism that the extending DBTU molecules in solvent of CS{sub 2} induce the formation of CdS/DBTU nanorods by coordinating with the formed CdS particles, and construct these nanorods to hollow nanowires via molecular interactions is proposed and discussed on the basis of experimental results. Photoluminescence (PL) of CdS/DBTU nanocomposite exhibits increasing emission intensity largely.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and luminescence properties of octahedral LiYbF{sub 4}: Er{sup 3+} microcrystals

Graphical abstract: LiYbF{sub 4}: Er{sup 3+} octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA. SEM, HRTEM, RD, PL spectra are used to characterize the samples. It can be seen from SEM data that the complexing agent EDTA made to hydrothermal synthetic procedures result in formation of LiYbF{sub 4} octahedral microparticles with smooth surface. From the HRTEM images, the distances between the lattice fringes were measured to be 2.99 A and 2.57 A which correspond to the d-spacing for (1 1 2) and (2 0 0) planes, respectively. From the XRD patterns for the LiYb{sub 0.99}Er{sub 0.01}F{sub 4} in the absence of chelating agent EDTA and in the presence of EDTA, it is evident that the diffraction peaks of both patterns are highly crystalline and all of the peaks could be readily indexed to the LiYbF{sub 4} phase (JCPDS 71-1211). No other impurity peaks were detected. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF{sub 4}: Er{sup 3+} microcrystals show the characteristic Er{sup 3+} emissions. The results show that the infrared light emissions at 792 nm of {sup 4}I{sub 9/2} {yields} {sup 4}I{sub 15/2} are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to {sup 2}H{sub 11/2} {yields} {sup 4}I{sub 15/2} and {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2}, respectively, and the red emission at 667 nm of {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} are relatively weaker. Research highlights: {yields} Monodisperse and regular octahedral microcrystals LiYbF{sub 4}: Er{sup 3+} with smooth surface has been prepared. {yields} The characteristic emissions of Er{sup 3+} ions are observed in LiYbF{sub 4} microcrystals. {yields} The content of EDTA will influence the fluorescence intensity. {yields} Luminescence intensity increases gradually at the beginning and then decreases gradually with increasing temperature. -- Abstract: LiYbF{sub 4}: Er{sup 3+} octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA (ethylenediaminetetraacetic acid). X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimeters (TG-DSC), photoluminescence (PL) spectra are used to characterize the samples. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF{sub 4}: Er{sup 3+} microcrystals show the characteristic Er{sup 3+} emissions. The results show that the infrared light emissions at 792 nm of {sup 4}I{sub 9/2} {yields} {sup 4}I{sub 15/2} are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to {sup 2}H{sub 11/2} {yields} {sup 4}I{sub 15/2} and {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2}, respectively, and the red emission at 667 nm of {sup 4}F{sub 9/2}{yields}{sup 4}I{sub 15/2} are relatively weaker. Most importantly, the samples show more efficient luminescence with further heat treatment.

36 MATERIALS SCIENCE↗

Synthesis, characterization, and hydrophobic properties of Bi{sub 2}S{sub 3} hierarchical nanostructures

Research highlights: {yields} Novel Bi{sub 2}S{sub 3} hierarchical nanostructures self-assembled by nanorods are successfully synthesized in mild benzyl alcohol system under hydrothermal conditions. {yields} The hierarchical nanostructures exhibit a flower-like shape. {yields} PVP plays an important role for the formation of the hierarchical nanostructures. {yields} Bi{sub 2}S{sub 3} film prepared from the flower-like hierarchical nanostructures exhibits good hydrophobic properties. -- Abstract: Novel Bi{sub 2}S{sub 3} hierarchical nanostructures self-assembled by nanorods are successfully synthesized in mild benzyl alcohol system under hydrothermal conditions. The hierarchical nanostructures exhibit a flower-like shape. X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED) were used to characterize the as-synthesized samples. Meanwhile, the effect of various experimental parameters including the concentration of reagents and reaction time on final product has been investigated. In our experiment, PVP plays an important role for the formation of the hierarchical nanostructures and the possible mechanism was proposed. In addition, Bi{sub 2}S{sub 3} film prepared from the flower-like hierarchical nanostructures exhibits good hydrophobic properties, which may bring nontrivial functionalities and may have some promising applications in the future.

36 MATERIALS SCIENCE↗

Facile preparation of carbon coated magnetic Fe{sub 3}O{sub 4} particles by a combined reduction/CVD process

Graphical abstract: Magnetic carbon coated Fe{sub 3}O{sub 4} particles are prepared by a one step combined reduction of Fe{sub 2}O{sub 3} together with a CVD process of using methane. Analyses show that the Fe{sub 2}O{sub 3} is reduced by methane to produce mainly Fe{sub 3}O{sub 4} particles coated with amorphous carbon. These materials can be separated into two fractions by simple dispersion in water and can be used as adsorbents, catalyst supports and rapid coagulation systems. Research highlights: {yields} Magnetic Fe{sub 3}O{sub 4} particles coated with a very thin layer of amorphous carbon (4 wt%). {yields} Combined reduction of Fe{sub 2}O{sub 3} with a Chemical Vapor Deposition process using methane. {yields} Nanoparticles with an average size of 100-200 nm. {yields} Uses as adsorbent, catalyst support and rapid coagulation systems. -- Abstract: In this work, we report a simple method for the preparation of magnetic carbon coated Fe{sub 3}O{sub 4} particles by a single step combined reduction of Fe{sub 2}O{sub 3} together with a Chemical Vapor Deposition process using methane. The temperature programmed reaction monitored by Moessbauer, X-ray Diffraction and Raman analyses showed that Fe{sub 2}O{sub 3} is directly reduced by methane at temperatures between 600 and 900 {sup o}C to produce mainly Fe{sub 3}O{sub 4} particles coated with up to 4 wt% of amorphous carbon. These magnetic materials can be separated into two fractions by simple dispersion in water, i.e., a settled material composed of large magnetic particles and a suspended material composed of nanoparticles with an average size of 100-200 nm as revealed by Scanning Electron Microscopy and High-resolution Transmission Electron Microscopy. Different uses for these materials, e.g., adsorbents, catalyst supports, rapid coagulation systems, are proposed.

36 MATERIALS SCIENCE↗

Low temperature synthesis and photoluminescent properties of CaMoO{sub 4}:Eu{sup 3+} red phosphor with uniform micro-assemblies

Highlights: {yields} Synthesis of Eu{sup 3+}-doped CaMoO{sub 4} red phosphor via a facile hydrothermal method. {yields} The morphology of the materials was manipulated using different alkaline sources. {yields} Micro-structures were assembled by small nanostructures. {yields} Luminescent investigations confirmed that the Eu{sup 3+} ions have been effectively doped into the nanostructures. {yields} Schematic diagram for the energy transfer clearly reveals the photoluminescent mechanism. -- Abstract: Scheelite-type Eu{sup 3+}-doped CaMoO{sub 4} red phosphor with uniform micro-assemblies has been successfully synthesized via a facile hydrothermal method at 120 {sup o}C for 10 h. The Eu{sup 3+}-doped CaMoO{sub 4} microstructures were assembled by small nanostructures and the morphology of materials was found to be manipulated by dropping different alkalis into the stock solution for the first time. The structure, morphology, and luminescent property were characterized and investigated by techniques of X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL). The luminescent investigations confirmed that the Eu{sup 3+} ions have been effectively doped into CaMoO{sub 4} nanostructures. The successfully achieved Eu{sup 3+}-doped CaMoO{sub 4} nanostructures will be potential in technological applications on near UV chip-based white light emitting diode (WLED).

36 MATERIALS SCIENCE↗

Low-temperature growth of well-aligned ZnO nanorods/nanowires on flexible graphite sheet and their photoluminescence properties

Highlights: ► Well-aligned ZnO nanostructures were grown on flexible graphite sheets at 500–650 °C. ► ZnO nanostructures are formed via self-catalytic vapor–solid process assisted by immiscibility of ZnO with graphite. ► The ZnO nanostructures show intensive green emission. ► The photoluminescence property can be easily tuned by changing growth condition or annealing treatment. -- Abstract: We have grown large-scale well-aligned ZnO nanorods/nanowires on commercial flexible graphite sheet (FGS) at low temperature via chemical vapor deposition method. The products were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The effects of the growth temperature and oxygen flow rate on the morphology of ZnO nanostructures have been investigated. The growth mechanism of ZnO is found to be a self-catalytic vapor–solid process assisted by the immiscibility of ZnO with graphite. The as-grown ZnO/FGS products show strong green emission and their photoluminescence properties can be tuned by changing growth condition or annealing treatment.

36 MATERIALS SCIENCE↗

Solvent directed fabrication of Bi{sub 2}WO{sub 6} nanostructures with different morphologies: Synthesis and their shape-dependent photocatalytic properties

Graphical abstract: The morphologies of the Bi{sub 2}WO{sub 6} nanostructures can be easily tuned by altering the solvent composition during the reaction, which will yield flower-like, pancake-like and tubular nanostructures, respectively. Highlights: ► The morphologies of Bi{sub 2}WO{sub 6} can be controlled by tuning the solvent composition. ► The effects of solvent on the morphologies of Bi{sub 2}WO{sub 6} were carefully investigated. ► The growth mechanisms for the as-prepared samples were investigated. ► The morphologies of the samples greatly affect their photocatalytic activities. -- Abstract: In this work, Bi{sub 2}WO{sub 6} with complex morphologies, namely, flower-like, pancake-like, and tubular shapes have been controllably synthesized by a facile solvothermal process. The as-obtained samples are systematically investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). The effects of solvents on the morphologies of Bi{sub 2}WO{sub 6} nanostructures are systematically investigated. According to the time-dependent experiments, a two-step growth mode basing on Ostwald ripening process and self-assembly has been proposed for the formation of the flower-like and pancake-like Bi{sub 2}WO{sub 6} nanostructures. The photocatalytic properties of Bi{sub 2}WO{sub 6} nanostructures are strongly dependent on their shapes, sizes, and structures for the degradation of rhodamine B (RhB) under visible-light irradiation. The deduced reasons for the differences in the photocatalytic activities of these Bi{sub 2}WO{sub 6} nanostructures are further discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of graphene–Ag composites and their application for electrochemical detection of chloride

Highlights: ► Graphene–Ag composites were prepared in situ using ascorbic acid as green reducing agent. ► The morphology of Ag particles was irregular sheet and Ag particles homogeneously distributed on the graphene matrix. ► The surface-enhanced Raman scattering enhancement factor of D band is 5.85 for composites. ► The composites exhibited good sensitivity for the detection of chloride ions. -- Abstract: Graphene–Ag composites were prepared in situ using ascorbic acid as green reducing agent. The composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electronic diffraction (SAED), and Raman spectrometer. It was showed that Ag particles homogeneously distributed on the graphene matrix. The morphology of Ag particles was irregular sheet with (1 1 1) basal plane. The surface-enhanced Raman scattering (SERS) enhancement factor of D band is 5.85 for composites. The application of the composites for electrochemical detection of chloride was studied by cyclic voltammetry. The composites exhibited good sensitivity for the detection of chloride ions. The maximum peak current of cyclic voltammetry curve in 5 mM KCl was 0.80 mA. In the range of 500 μM to 50 mM for Cl{sup −}, the current response was proportional and linear to the Cl{sup −} concentration. The sensitivity to the detection for Cl{sup −} was 0.059 (mA/mM) and the detection limit was 61 μM for Cl{sup −}. It indicates graphene–Ag composites would be a competitive material for detection of halide.

36 MATERIALS SCIENCE↗

Co-evaporation of transition metal salt and SiO powder toward copper(or nickel)/silicon-contained composite nanostructures

Graphical abstract: Copper(or nickel)/silicon-contained composite nanostructures were successfully synthesized by co-evaporating SiO powder and corresponding transition metal salts (nickel formate and copper sulfate). Display Omitted Highlights: ► Novel nanostructures were synthesized by co-evaporating SiO and metal salts. ► A pre-sintering process was used in the synthesis of copper/silicon nanocomposites. ► A Ni{sub 31}Si{sub 12}/Si/SiO{sub 2} nanocomposite was obtained. ► Peapod-like copper/silicon-contained nanocomposites were obtained. ► On the basis of experimental results, the formation mechanism was discussed. -- Abstract: We demonstrate that several novel copper(or nickel)/silicon-contained composite nanostructures were successfully synthesized by co-evaporating SiO powder and corresponding transition metal salts (transition metal organic salt and transition metal inorganic salt), including nickel formate, cobalt acetate, and copper sulfate. The morphologies, compositions, and crystal structures of products were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The results indicate that the morphology and composition of formed copper(or nickel)/silicon-contained composite nanostructures are dramatically influenced by the distance between SiO powder and transition metal salts, or by the pre-sintering temperature of the reactants. The possible formation mechanisms of these composite nanostructures were discussed on the basis of experimental observations.

36 MATERIALS SCIENCE↗

Controlled synthesis and thermal stability of hydroxyapatite hierarchical microstructures

Highlights: ► Hydroxyapatite hierarchical microstructures have been synthesized by a facile method. ► The morphology and size of the building units of 3D structures can be controlled. ► The hydroxyapatite with 3D structure is morphologically and structurally stable up to 800 °C. - Abstract: Hydroxyapatite (HAp) hierarchical microstructures with novel 3D morphology were prepared through a template- and surfactant-free hydrothermal homogeneous precipitation method. Field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD) were used to characterize the morphology and composition of the synthesized products. Interestingly, the obtained HAp with 3D structure is composed of one-dimensional (1D) nanorods or two-dimensional (2D) nanoribbons, and the length and morphology of these building blocks can be controlled through controlling the pH of the reaction. The building blocks are single crystalline and have different preferential orientation growth under different pH conditions. At low pH values, octacalcium phosphate (OCP) phase formed first and then transformed into HAp phase due to the increased pH value caused by the decomposition of urea. The investigation on the thermal stability reveals that the prepared HAp hierarchical microstructures are morphologically and structurally stable up to 800 °C.

36 MATERIALS SCIENCE↗

Controllable synthesis, shape evolution, and luminescence properties of uniform and well-dispersed NaEuF{sub 4} microcrystals through hydrothermal route

Graphical abstract: Sodium europium fluorides NaEuF{sub 4} microcrystals have been prepared via a facile hydrothermal route. The possible growth mechanism and the luminescent properties of the as-prepared microcrystals have been discussed. - Highlights: • Sodium europium fluorides NaEuF{sub 4} microspheres were prepared by a facile hydrothermal route. • The as-prepared samples NaEuF{sub 4} and EuF{sub 3} exhibit respective red or orange-red emissions. • These finding may find potential applications in the fields of color display, UV laser and biomedicine. - Abstract: Sodium europium fluorides NaEuF{sub 4} microcrystals with uniform and well-dispersed shapes and dimensions have been prepared via a facile hydrothermal route using Na{sub 3}Cit as the chelating ligand and shape modifier. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), energy-dispersive X-ray (EDX) and photoluminescence spectra (PL) were taken to characterize the samples. A series of controlled experiments reveal that the trisodium citrate (Na{sub 3}Cit) content, pH value of the initial solution, and reaction time have an indispensable role on the phase, size, and morphology of the as-prepared microcrystals. Based on the experimental results, the possible growth mechanism of the microcrystals prepared under different conditions was proposed. Moreover, we systematically investigated the luminescent properties of the as-prepared microcrystals with different morphologies obtained under different amounts of Na{sub 3}Cit, which have potential application in the fields of color display, UV laser and biomedicine.

36 MATERIALS SCIENCE↗

Efficient photocatalytic degradation of gaseous formaldehyde by the TiO{sub 2}/tourmaline composites

Graphical abstract: - Highlights: • The TiO{sub 2}/tourmaline composites were prepared by a sol–gel method. • The composites exhibited excellent photocatalytic activity and good stability. • The physicochemical property of tourmaline may be favor for the degradation of HCHO. • The mixed-phase of anatase and rutile TiO{sub 2} may be favor for the degradation of HCHO. - Abstract: The TiO{sub 2} supported tourmaline composites were prepared by a sol–gel method and used as a photocatalyst for the degradation of formaldehyde (HCHO). The composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), N{sub 2} adsorption–desorption, Fourier transform infrared (FT-IR) spectroscopy and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). The results indicate that the mixed-phase of anatase and rutile exists in the TiO{sub 2}/tourmaline composites. The specific surface area of the TiO{sub 2}/tourmaline composites is much higher than that of the pure TiO{sub 2}. The TiO{sub 2}/tourmaline composites exhibited excellent photocatalytic activity for the degradation of HCHO, which was 6 times higher than that of the pure TiO{sub 2}. Moreover, the excellent photocatalytic activity of the composites was fully maintained after five photocatalytic cycles, which may be attributed to the physicochemical property of tourmaline and the mixed-phase of anatase and rutile in the TiO{sub 2}/tourmaline composites.

36 MATERIALS SCIENCE↗

Ag/AgBr/g-C{sub 3}N{sub 4}: A highly efficient and stable composite photocatalyst for degradation of organic contaminants under visible light

Graphical abstract: Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts displayed excellent photocatalytic activities on the degradation of methyl orange (MO) under visible light. The improved photocatalytic performance and stability of Ag/AgBr/g-C{sub 3}N{sub 4} originated from the synergetic effects of AgBr/g-C{sub 3}N{sub 4} interface and metallic Ag nanoparticles. ·O{sub 2}−, one of the reactive species, was responsible for the photodegradation of MO compared to H+ and ·OH. - Highlights: • Novel Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalyst was reported. • Ag/AgBr/g-C{sub 3}N{sub 4} had novel energy band combination between AgBr and g-C{sub 3}N{sub 4}. • Synergetic effects of AgBr/g-C{sub 3}N{sub 4} interface and metallic Ag nanoparticles. • Electron trapping role of metallic Ag dominated the stability of Ag/AgBr/g-C{sub 3}N{sub 4}. - Abstract: Novel Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts were constructed via deposition–precipitation method and extensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis diffuse reflectance spectroscopy (DRS). Under visible light (λ > 420 nm), Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts displayed much higher photocatalytic activities than those of Ag/AgBr and g-C{sub 3}N{sub 4} for degradation of methyl orange (MO). 50% Ag/AgBr/g-C{sub 3}N{sub 4} presented the best photocatalytic performance, which was mainly attributed to the synergistic effects of AgBr/g-C{sub 3}N{sub 4} interface and the in situ metallic Ag nanoparticles for efficiently separating electron–hole pairs. Furthermore, Ag/AgBr/g-C{sub 3}N{sub 4} remained good photocatalytic activity through 5 times of cycle experiments. Additionally, the radical scavengers experiment indicated that ·O{sub 2}{sup −} was the main reactive species for the MO degradation under visible light.

36 MATERIALS SCIENCE↗

Synthesis, structural, optical and Raman studies of pure and lanthanum doped ZnSe nanoparticles

Graphical abstract: - Highlights: • Template-free synthesis of ZnSe and ZnSe:La nanoparticles was developed at low temperature 100 °C. • Cubic ZnSe and ZnSe:La nanoparticles were obtained by chemical route. • As-synthesized ZnSe:La nanoparticles showed higher emission intensity than ZnSe nanoparticles. • Band gap (E{sub g}) of ZnSe nanoparticles was bigger than ZnSe nanoparticles due to nanosized effect. - Abstract: In this work, a simple, effective and reproducible chemical synthetic route for the production of high-quality, pure ZnSe nanoparticles (NPs), and lanthanum-doped ZnSe (ZnSe:La) NPs is presented. The wide bandgap, luminescent pure ZnSe and ZnSe:La NPs has been synthesized at a low temperature (100 °C) in a single template-free step. The size and optical bandgap of the NPs was analyzed from powder X-ray diffraction (XRD), UV–visible (UV–vis) spectroscopy, transmission electron microscopy (TEM), and high resolution transmission electron microscopy (HRTEM). A broad photoluminescence (PL) emission across the visible spectrum has been demonstrated by a systematic blue-shift in emission due to the formation of small nanoparticles. Here, contribution to emission intensity from surface states of NPs increases with La doping. TEM data revealed that the average size of ZnSe and ZnSe:La NPs is 14 and 8 nm, respectively. On the other hand, band gap energy E{sub g} of ZnSe and ZnSe:La NPs were found to be 3.59 eV and 3.65 eV, respectively. Results showed that hydrazine hydrate played multiple roles in the formation of ZnSe and ZnSe:La NPs. A possible reaction mechanism for the growth of NPs is also discussed.

36 MATERIALS SCIENCE↗

A novel Bi-based phosphomolybdate photocatalyst K{sub 2}Bi(PO{sub 4})(MoO{sub 4}): Crystal structure, electronic structure and photocatalytic activity

Graphical abstract: - Highlights: • A new type of phosphomolybdate K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) photocatalyst was successfully synthesized. • The products synthesized at 600 °C were mainly composed of nano-cubes. • The indirect band gap of K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) has been determined to be 2.93 eV. • K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) synthesized at 600 °C exhibits the highest photocatalytic activity. • The electronic structure was calculated by density functional calculations. - Abstract: A novel phosphomolybdate photocatalyst K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) has been successfully developed via a solid-state reaction. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), diffuse reflectance spectrum (DRS) and photoluminescence (PL) spectra. The photocatalytic activities of the samples prepared at different temperature were determined by the photooxidative decomposition of methylene blue (MB) in aqueous solution. The results revealed that K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) can be used as an effective photocatalyst under UV–vis irradiation and the nanocubes obtained at 600 °C exhibits the highest photocatalytic activity. The photodegradation of MB by K{sub 2}Bi(PO{sub 4})(MoO{sub 4}) nanocrystals followed the first-order kinetics. Theoretical calculations on electronic structure confirmed the indirect optical transitions property in the absorption edge region of K{sub 2}Bi(PO{sub 4})(MoO{sub 4}), and the orbital constitutions of CB and VB were also analyzed.

36 MATERIALS SCIENCE↗

Synthesis of BiOI flowerlike hierarchical structures toward photocatalytic reduction of CO{sub 2} to CH{sub 4}

BiOI can be used for photocatalytic reduction of CO{sub 2} into hydrocarbon fuels under sunlight. - Highlights: • Room temperature synthesis of BiOI flowerlike hierarchical structures. • BiOI can be used for photocatalytic reduction of CO{sub 2} into hydrocarbon fuels under sunlight. • The photocatalytic activity of BiOI is higher than that of P25 TiO{sub 2}. - Abstract: BiOI flowerlike hierarchical structure was synthesized by the direct hydrolysis method – hydrolysis at room temperature in the presence of polyvinyl pyrrolidone. As-synthesized BiOI was characterized by powder X-ray diffraction, UV–vis diffuse reflectance spectra, X-ray photoelectron spectroscopy spectra, scanning electron microscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. It is a facile way to obtain BiOI flowerlike hierarchical structure photocatalyst for photocatalytic reduction of CO{sub 2} into hydrocarbon fuels under simulated sunlight irradiation without cocatalyst. And the photocatalytic activity of as-synthesized BiOI is higher than that of P25 TiO{sub 2} and bulk BiOI.

36 MATERIALS SCIENCE↗