Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Elasticity of some mantle crystal structures. II.

The single-crystal elastic constants are determined as a function of pressure and temperature for rutile structure germanium dioxide (GeO2). The data are qualitatively similar to those of rutile TiO2 measured by Manghnani (1969). The compressibility in the c direction is less than one-half that in the a direction, the pressure derivative of the shear constant is negative, and the pressure derivative of the bulk modulus has a relatively high value of about 6.2. According to an elastic strain energy theory, the negative shear modulus derivative implies that the kinetic barrier to diffusion decreases with increasing pressure.

Wang, H.↗
DOE OSTI2023

Investigation of Best-Practices and Computationally Inexpensive Radiative Exchange Models for Discrete Element Method Modeling of Aluminosilicate Particles in Concentrating Solar Power Environments

Chemically inert, aluminosilicate based particles have been investigated as both a thermal transport and sensible energy storage medium for concentrating solar power facilities. These particles will experience a wide range of operating temperatures (300-1000 K) and handling conditions (dense to dilute falling particle curtains, dense granular flows, or dense structures), requiring specially-designed and optimized infrastructures. The relative influence of collisional and frictional interactions between particles varies based on temperature-dependent particulate properties and greatly impacts the bulk, granular flow behavior. These underlying physics are captured using discrete element method modeling tools. However, this modeling method is computationally expensive as each particle position and interaction is tracked during the simulation. These modeling methods are further complicated by introducing temperature-dependent particle properties, high-temperature radiative exchange, and directional irradiation sources experienced by granular flows in concentrating solar power environments. In this study, coupled experimental and numerical slump testing of aluminosilicate particles was performed and computationally efficient radiative exchange models were evaluated to establish best-practices for discrete element method models for concentrating solar power environments. The three particle types investigated included Carbobead HSP 30 /60, Carbobead CP 30/60, and Granusil 4030. Existing modeling limitations and computationally-efficient multi-modal heat transfer models were evaluated using Aspherix®, a commercial discrete element method software. High-temperature (< 1073 K) slump testing of aluminosilicate particles was performed to investigate the deviation between experimentally-observed and numerically-predicted angles of repose introduced by computation-time reduction practices including the relaxation of the particle elastic modulus and coarse-graining. Coarse-graining is used to use a single modeled particle that is representative of a collection of smaller particles, decreasing the computational cost at the expense of geometric accuracy. Additionally, relaxation of the elastic modulus is used to reduce computational time at the expense of an increased, modeled particle overlap. Prior studies have determined that aluminosilicate particles retain a high elastic modulus at high temperatures (< 1073 K), requiring small simulation timesteps to ensure resolved contact forces resemble appropriate solid mechanics. A parametric study was performed to evaluate the influence of computation time improvements on the deviation between experimental and modeled angle of repose across high temperatures < 1073 K. Additionally, numerical case studies were performed on candidate particle systems at varying porosities and temperatures. These studies were performed to investigate the influence of computationally-efficient radiative-exchange modeling methods coupled to Aspherix® on modeled accuracy and computation time. The recently-developed distance-based approximation was evaluated in estimating radiative exchange between particles and participating surfaces located in close proximity. The distance based approximation was developed to use tabulated estimates of the radiative distribution factor between individual particles and surfaces in close proximity (< 40 particle radii). These methods were expanded to the aluminosilicate particles of interest, including the influence of particle size distributions. To capture radiative exchange between particles and surfaces not in close proximity (> 40 particle radii) and to capture the absorption of directional irradiation from concentrating solar resources, a volumetrically-averaged radiative distribution factor was calculated between the modeled granular flow and surfaces using Monte Carlo ray-tracing for participating media. Volume-averaged absorption and scattering coefficients were predicted using a volumetric discretization of the modeled domain with monodisperse approximations based on geometric optics and experimentally-determined scattering phase functions for aluminosilicate particles.

14 SOLAR ENERGY↗
DOE OSTI2025

Renewable Lactam Monomer for Tunable and Processable Polyamides

Replacement of petroleum-derived monomers with renewable alternatives is an integral part of the sustainable polymer framework. Research in this area involves the search for bio-based or recycled starting materials for traditional polymers, as well as investigations into new materials accessible from renewable feedstocks. Focusing on the latter, we studied the properties of polyamides synthesized from γ-methyl-ε-caprolactam through anionic ring-opening polymerization by an activated monomer mechanism. Here, the amorphous homopolymer presents high stiffness (Young’s modulus, ≈3 GPa), strength (stress at break, ≈80 MPa) and toughness under dry (low humidity) conditions, high ductility (strain at break, ≈1100%) in humid environments, optical clarity, and excellent processability due to its non-crystallizable nature and solubility in common organic solvents. Copolymerization with ε-caprolactam allows tailoring the mechanical properties and crystallinity in the resultant copolymers and provides new opportunities for advanced manufacturing and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A combined machine learning and density functional theory study of binary Ti-Nb and Ti-Zr alloys: Stability and Young’s modulus

The multicomponent Ti alloys, specifically the -phase, have experienced a strong growth over the last decades, due to their outstanding properties of ultra-high strength and low Young’s modulus. These properties play a significant role in many aerospace and biomedical applications. Selection and optimization of multicomponent alloys is challenging due to the vast chemical and compositional space. Here we investigate the use of machine learning techniques informed by density functional calculations to guide the selection of Nb- and Zr-based Ti binary alloys. From the cubic structures obtained from high throughput calculations and literature, we identify several structures with Young’s moduli below 40 GPa. The multivariant decision tree methods provide efficient surrogate models to identify structure variables have high influences on the energetic stability and Young’s modulus. Furthermore, we implement a workflow of incorporating DFT provided results and machine learning method to explore the chemical and composition space of other binary and multicomponent alloys, to eventually accelerate the material design via taking advantages of identified key variables.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Process Optimization of Bismaleimide (BMI) Resin Infused Carbon Fiber Composite

Engineers today are presented with the opportunity to design and build the next generation of space vehicles out of the lightest, strongest, and most durable materials available. Composites offer excellent structural characteristics and outstanding reliability in many forms that will be utilized in future aerospace applications including the Commercial Crew and Cargo Program and the Orion space capsule. NASA's Composites for Exploration (CoEx) project researches the various methods of manufacturing composite materials of different fiber characteristics while using proven infusion methods of different resin compositions. Development and testing on these different material combinations will provide engineers the opportunity to produce optimal material compounds for multidisciplinary applications. Through the CoEx project, engineers pursue the opportunity to research and develop repair patch procedures for damaged spacecraft. Working in conjunction with Raptor Resins Inc., NASA engineers are utilizing high flow liquid infusion molding practices to manufacture high-temperature composite parts comprised of intermediate modulus 7 (IM7) carbon fiber material. IM7 is a continuous, high-tensile strength composite with outstanding structural qualities such as high shear strength, tensile strength and modulus as well as excellent corrosion, creep, and fatigue resistance. IM7 carbon fiber, combined with existing thermoset and thermoplastic resin systems, can provide improvements in material strength reinforcement and deformation-resistant properties for high-temperature applications. Void analysis of the different layups of the IM7 material discovered the largest total void composition within the [ +45 , 90 , 90 , -45 ] composite panel. Tensile and compressional testing proved the highest mechanical strength was found in the [0 4] layup. This paper further investigates the infusion procedure of a low-cost/high-performance BMI resin into an IM7 carbon fiber material and the optical, chemical, and mechanical analyses performed.

Ehrlich, Joshua W.↗
DOE OSTI2020

Shape Dependence of Pressure-Induced Phase Transition in CdS Semiconductor Nanocrystals

Understanding structural stability and phase transformation of nanoparticles under high pressure is of great scientific interest, as it is one of the crucial factors for design, synthesis, and application of materials. Even though high-pressure research on nanomaterials has been widely conducted, their shape-dependent phase transition behavior still remains unclear. Examples of phase transitions of CdS nanoparticles are very limited, despite the fact that it is one of the most studied wide band gap semiconductors. Here we have employed in-situ synchrotron wide-angle X-ray scattering (WAXS) and transmission electron microscopy (TEM) to investigate the high-pressure behaviors of CdS nanoparticles as a function of particle shapes. We observed that CdS nanoparticles transform from wurtzite to rocksalt phase at elevated pressure in comparison to their bulk counterpart. Phase transitions also vary with particle shape—rod-shaped particles show a partially reversible phase transition and the onset of the structural phase transition pressure decreases with decreasing surface-to-volume ratios, while spherical particles undergo irreversible phase transition with relatively low phase transition pressure. Additionally, TEM images of spherical particles exhibited sintering-induced morphology change after high-pressure compression. Calculations of the bulk modulus reveals that spheres are more compressible than rods in the wurtzite phase. These results indicate that the shape of the particle plays an important role in determining their high-pressure properties. Our study provides important insights into understanding of the phase-structure-property relationship, guiding future design and synthesis of nanoparticles for promising applications.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Influence of extended exposure in space on mechanical properties of high-toughness graphite-epoxy composite material (A0019)

Graphite-epoxy composites are promising candidates for structural use in space vehicles because of their high strength and elastic modulus properties. The problem of low fracture toughness was solved by use of recently developed techniques of intermittent interlaminar bonding. Before this material can be adapted for space use, however, confidence must be gained that its mechanical properties are not degraded by exposure to the space environment. The objective of this experiment is to test the effect of extended exposure to a space environment on the mechanical properties of a specially toughened T300/5208 graphite-epoxy composite material. Specimens made by recently developed techniques of intermittent interlaminar bonding will be exposed and afterward tested for fracture toughness, tensile strength, and elastic modulus. The approach of this experiment is to provide a frame on which the specimens can be mounted with their flat sides normal to the Long Duration Exposure Facility radius, each specimen with an unobstructed exposure of about 2 pi sr. The specimens will be mounted so that they neither fracture from high stress nor fail from excessive heating during launch and return.

Felbeck, D. K.↗
NASA NTRS2020

Molecular Dynamics Investigation of the Structural and Mechanical Properties of Off-Stoichiometric Epoxy Resins

We carried out molecular dynamics (MD) simulations to measure the mechanical properties of various off-stoichiometric polymers regarding amine to epoxy ratios (r) and to understand the stiffness of the polymers in terms of their structures. The aerospace-grade API-60 epoxy resin is used as an adhesive bond for assembling large-scale composite structures via the co-curing-ply bonding method. This method will produce a reliable and certifiable composite joint without additional fasteners. Calculated Young's modulus was measured from the uniaxial tension simulation with several high strain rates, and the experimental modulus was estimated by extrapolating the simulation results. We found that the stiffness was associated with molecular packing caused by chemical cross-linking. We also found that the number of network clusters gradually decreased as the ratio approached r = 1.0, which made the tighter cluster and the system much stiffer with an increase in the molecular weight and the degree of cross-linking. Structural properties such as Rg, MSD were measured to figure out the degree of stiffness with respect to the r.

Jang, Chang Woon↗
DOE OSTI2022

Filament Formation and Melt Spinning of Coal-Based Mesophase Pitch for Carbon Fiber Production

High-performance carbon fibers excel as high specific strength and modulus materials, and are utilized in composites applications ranging across aerospace, automotive, energy, infrastructure, and sports equipment sectors. Compared to PAN-based carbon fiber, mesophase pitch-based carbon fiber has lower tensile strength but provides a higher modulus, higher thermal conductivity, and a lower cost potential. However, challenges in stable, continuous melt spinning processing are a serious limiting factor. Unlike typical melt spinning of long, linear chain polymers, mesophase pitch is a comprised of relatively shorter polycyclic aromatic hydrocarbons which form a liquid crystal. In its ‘green’ or ‘as-spun’ state, the fibers are very fragile. Moreover, its temperature of processing is quite high, often approaching 400ºC. Complex flow dynamics combined with short length and time scale heat transfer render its melt spinning a formidable processing challenge. Improved understanding of the root causes for nascent filament breakage and spinning instabilities are needed. This work aims to determine fundamental phenomena that govern mesophase pitch filament formation by comparison of required draw force and uninterrupted spinning minutes with applied draw down ratio. The effect of perturbations on spinning stability are analyzed using capillary rheometry, microscopy of elongating filaments, and filtration.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Raman and X-ray diffraction study of pressure-induced phase transition in synthetic Mg 2 TiO 4

Synthetic Mg 2 TiO 4 qandilite was investigated to 50 and 40.4 GPa at room temperature using Raman spectroscopy and X-ray diffraction, respectively. The Raman measurements showed that cubic Mg 2 TiO 4 spinel transforms to a high pressure tetragonal (I4 1 /amd, No.141) phase at 14.7 GPa. Owing to sluggish kinetics at room temperature, the spinel phase coexists with the tetragonal phase between 14.7 and 24.3 GPa. In the X-ray diffraction experiment, transformation of the cubic Mg 2 TiO 4 to the tetragonal structure was complete by 29.2 GPa, ~5 GPa higher than the transition pressure obtained by Raman measurements, owing to slow kinetics. The obtained isothermal bulk modulus of Mg 2 TiO 4 spinel is K T0 = 148(3) GPa when K T0 ’ = 6.6, or K T0 = 166(1) GPa when K T0 ’ is fixed at 4. The isothermal bulk modulus of the high-pressure tetragonal phase is calculated to be 209(2) GPa and V 0 = 270(2) Å 3 when K T0 ’ is fixed at 4, and the volume reduction on change from cubic to tetragonal phase is about 9%. The calculated thermal Grüneisen parameters (γ th ) of cubic and tetragonal Mg 2 TiO 4 phases are 1.01 and 0.63. Based on the radii ratio of spinel cations, a simple model is proposed to predict post-spinel structures.

36 MATERIALS SCIENCE↗
NASA NTRS1991

The use of carboranes as oxidation inhibitors for carbon-carbon composites

Carbon-carbon composites have many beneficial properties for use in aerospace applications, including their high specific strength and modulus at elevated temperatures. However, they share with all carbon based substances a strong tendency to burn when heated in air. In order to exploit their good qualities, it is necessary to slow or prevent their oxidation during use. Molecular inhibiters offer protection with the advantage of being able to form a homogeneous solution with the resin. Since boron oxides are known to provide the desired kind of protection, molecular compounds based on boron seem reasonable candidates to test as inhibitors. Performance tests indicated that carboranes are excellent materials for obtaining high uniform loadings of boron inhibitors in glassy carbon materials and thus reducing their rates of oxidation. Further, there is evidence that the use of substituted derivatives could provide more complete and thorough forms of protection.

Petty, John T.↗
DOE OSTI2025

High-pressure high-temperature melting and recrystallization of nanolamellar high-entropy alloys

Additively manufactured (AM) High Entropy Alloys (HEAs) are notable for their exceptional high-yield strength and large tensile ductility. The nanolamellar Eutectic HEA (EHEA) AlCoCrFeNi 2.1 was fabricated by laser powder bed fusion (L-PBF) in the as-printed form (EHEA1) and subsequently annealed at 1000oC (EHEA2) and 600oC (EHEA3) to achieve a broad range of mechanical properties. EHEA2 and EHEA3 samples were studied using Scanning transmission electron microscopy (STEM), energy dispersive X-ray diffraction (EDXRD) at high-pressures and high temperatures, nanoindentation hardness and modulus measurements. According to EDXRD EHEA2 and EHEA3 are composed of B2 and L1 2 phases. High-pressure high-temperature EDXRD studies show melting for EHEA2 at 1698 ± 25 K at a pressure of 6.5 GPa and melting for EHEA3 at 1598 ± 25 K at a pressure of 5.8 GPa. Post-melt and recrystallized samples were recovered at ambient conditions, and XRD analysis showed retention of B2 and L1 2 phases, although a new σ phase appeared for both EHEA2 and EHEA3 samples due to high-pressure and high-temperature melting and recrystallization experiment. SEM analysis also demonstrated the preservation of the nanolamellar morphology. Nanoindentation studies revealed that recrystallized EHEAs retain their original mechanical property hierarchy, with EHEA3 being 47% harder than EHEA2, largely related to higher content of B2-phase and retention of nanolamellar morphology. We also present Pressure-Volume-Temperature (P-V-T) data for 3-D printed and annealed eutectic high entropy alloys and extract mechanical and thermal properties data.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis and Ultrahigh Pressure Compression of High-Entropy Boride (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 to 220 GPa

The high-entropy boride (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 material was synthesized under high-pressures and high-temperatures in a large-volume Paris-Edinburgh (PE) press from a ball-milled powder mix of HfO2, MoO3, Nb2O5, Ta2O5, ZrO2, carbon black, and boron carbide. The transformation process was monitored in situ by energy-dispersive x-ray diffraction with conversion starting at 1100 °C and completed by 2000 °C with the formation of a single hexagonal AlB2-type phase. The synthesized sample was recovered, powdered, and mixed with platinum pressure marker and studied under high pressure by angle-dispersive x-ray diffraction in a diamond anvil cell. The hexagonal AlB2-type phase of (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 was found to be stable up to the highest pressure of 220 GPa reached in this study (volume compression V/V0 = 0.70). The third order Birch-Murnaghan equation of state fit to the high-pressure data up to 220 GPa results in an ambient pressure unit cell volume V0=28.16±0.04 Å3, bulk modulusKo = 407 ± 6 GPa, pressure derivative of bulk-modulus K0′ = 2.73 ± 0.045 GPa. Our study indicates that this high-entropy boride (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 material is stable to ultrahigh pressures and temperatures and exhibit high bulk modulus similar to other incompressible transition metal borides like ReB2 and Os2B3.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Compression Response of Silicone-Based Composites with Integrated Multifunctional Fillers

Polydimethylsiloxane (PDMS) is known for its exceptional mechanical properties, chemical stability, and flexibility. Recent advancements have focused on developing functional PDMS composites by integrating various functional fillers, including polymers, ceramics, and metals, for advanced applications such as electronics, medical devices, and aerospace. Consequently, there is a growing need to investigate PDMS composites to achieve higher filler loadings offering enhanced mechanical performance. This study addresses this need by utilizing the high molecular weight (MW) PDMS resin we have developed, offering its high elongation capacity of up to >6500%. We incorporated boron (B), hollow glass microballoons (HGMs), and tungsten-coated hollow glass microballoons (WHGMs) into the developed high MW PDMS. The resulting composites demonstrated excellent elastic properties and significant compression resilience (35–80%) and elastic modulus (1.28–10.15 MPa) at high filler loadings (~60 vol.%). Specifically, B/PDMS composites achieved up to 67.6 vol.% of B, HGM/PDMS composites held up to 68.6 vol.% of HGM, and WHGM/PDMS composites incorporated up to 54.0 vol.% of WHGM. These findings highlight the potential of high MW PDMS for developing high-performance PDMS composites suitable for advanced applications such as aerospace, automotive, and medical devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

On the 3D printability of one-part moisture-curable polyurethanes via direct ink writing (DIW)

Direct ink writing (DIW) is an ambient temperature additive manufacturing (AM) method that accommodates many possible ink materials. Here, in this work, we demonstrate using a moisture-curable commercially available polyurethane (PU) sealant as an alternative ink for DIW. We discussed the fundamentals of PU chemistry and determined the best 3D printing parameters. Studies on rheological, thermogravimetric, spectroscopic characterization, and initial finite element analyses (FEA) showed properties expected from a performance sealant with high elongation and low modulus of a 3D-printed object. This affirms the flexibility of the DIW technique as an accessible AM method amenable for future materials development from commercial model formulations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of inhomogeneities in coal-based mesophase pitch on filament formation and melt spinning for carbon fiber

Mesophase pitch-based carbon fibers excel as high specific strength and modulus materials, but challenges in stable, continuous melt spinning processing are a serious limiting factor. Inhomogeneities in the pitch may result in flow instabilities that can lead to filament breakage. This work aims to characterize and offer mitigation strategies for the negative effects that inhomogeneities such as isotropic binder, gels, and other inclusions impart on melt spinning of mesophase pitch. The effect of inhomogeneities on spinning stability are analyzed using capillary rheometry, borescope imaging of elongating filaments, and filtration. With no filter, immediate blockage of the spinning capillary occurred. Improvement in melt spinning duration was observed when a porous metal filter (20 μm nominal pore size) was utilized, but no significant further improvement in spinning duration was found upon decreasing the filter nominal pores size to 10, 5 and 2 μm. Moreover, flow instabilities that disrupted melt spinning stability were observed by capillary rheometry when the size of included isotropic pitch domains were larger than approximately 10 μm. Resultant carbon fiber properties and SEM imaging of fracture surfaces are reported.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

NanoMechanics: Elasticity and Friction in Nano‐Objects

A large scientific and technological effort is underway to investigate the properties of two‐dimensional (2D) materials to become building blocks in integrated nano‐electronic and photonic circuits, composites, coatings, energy harvesting nano‐ systems, nano‐sensors, and nano‐electro‐mechanical systems (NEMS).While several experiments and calculations have revealed exciting novel phenomena in these nanostructures, many scientific and technological questions remain open. In particular, understanding and controlling the structure and mechanical properties of 2D materials at the interface with a solid surface is of key importance to enable the aforementioned nanotechnologies, as well as to fulfill the potential of strain engineering to tailor their properties. The vision of this DoE research program was to investigate novel mechanical properties and phenomena in 1D and 2D materials with the overarching goal of defining a new basic understanding of mechanical behavior in nano and quantum systems. The group of the PI has developed in the last years several studies on the mechanical properties of Carbon nanotubes and oxide nanobelts, more recently the PI has focused her attention on the properties of two‐dimensional materials, such as graphene and MoS 2 , which are a few‐atomic‐layer thick films and hold a great potential for technological and energy applications. The most studied 2D material is graphene, existing as a single layer of graphite or a few‐layer thick epitaxial graphene film. Graphene possesses a large in‐plane Young’s modulus as well as high intrinsic carrier mobility, and high in‐plane thermal conductivity. Besides graphene, also 2D films of graphene oxide (GO), hexagonal Boron Nitride (h‐BN), and transition metal dichalcogenides such as MoS 2 exhibit unique and excellent properties and hold great promise for nanotechnology applications. This research program was aimed at developing a new basic understanding of the mechanical properties of 1D and 2D materials at the interface with solid substrates, with a focus on the role of defects, materials structure, and substrate interaction. Ultimately, we aimed at developing the basic knowledge and experimental tools for manipulating 1D and 2D materials’ structure, stacking, substrate interaction, defects, and number of layers to realize an entirely new class of ultra‐hard, ultra‐thin, and ultra‐light active materials with ad‐ hoc mechanical properties for a variety of applications.

2D Materials↗