Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high dimensionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Acoustic propagation in rigid sharp bends and branches

The linear acoustic propagation in rigid planar sharp bends and bifurcation ducts is analyzed using a Green's-function integral technique often known as the surface element method. The acoustic characteristics of the sharp bend differ substantially from those of a circular bend with identical turning angle, width, and centerline length. The acoustic loading resulting from a duct bifurcation is highly two dimensional beyond the first cutoff frequency.

El-Raheb, M.↗
NASA NTRS1980

Thin-layer approximation for three-dimensional supersonic corner flows

The thin-layer approximation is extended to an axial corner that is formed by the intersection of two perpendicular plates, one of which has an inclination angle with respect to the free stream. A computer code developed by Hung and MacCormack (1978) is modified for the thin-layer approximation, and a case with Mach 5.9 and a wedge angle of 6 deg is computed. In addition, it is shown that it is not necessary to solve the complete Navier-Stokes equations for a three-dimensional high-Reynolds-number corner flow.

Hung, C. M.↗
NASA NTRS1982

Comparison of Experimental and Analytical Performance for Contoured Endwall Stators

Comparisons between predicted and experimental stator losses showed that the analysis was able to predict the change in stator loss when contoured endwalls with highly three dimensional passage geometry were used. The level of loss was predicted to within 75 percent of that measured. The predicted loss was due only to profile loss and boundary layer growth on the endwalls. The 25 percent difference was approximately 0.015 at design pressure ratio. The analysis was shown to predict the trend in stator flow angle, even for small stator geometries.

Boyle, R. J.↗
NASA NTRS1984

Tunnel constraint for a jet in crossflow

A facet of a unified tunnel correction scheme which uses wall pressures to determine tunnel induced blockage and upwash is described. With this method, there is usually no need to use data concerning model forces or power settings to find the interference; it follows directly from the pressures and tunnel dimensions. However, highly inclined jets do not produce good pressure signatures and are highly three dimensional, so they must be treated differently. Flow modeling is also discussed.

Wilsden, D. J.↗
NASA NTRS1984

A study of flow past an airfoil with a jet issuing from its lower surface

The aerodynamics of a NACA 0018 airfoil with a rectangular jet of finite aspect ratio exiting from its lower surface at 90 deg to the chord were investigated. The jet was located at 50% of the wing chord. Measurements include static pressures on the airfoil surface, total pressures in the near wake, and local velocity vectors in different planes of the wake. The effects of jet cross flow interaction on the aerodynamics of the airfoil are studied. It is indicated that at all values of momentum coefficients, the jet cross flow interaction produces a strong contra-rotating vortex structure in the near wake. The flow behind the jet forms a closed recirculation region which extends up to a chord length down stream of the trailing edge which results in the flow field to become highly three dimensional. The various aerodynamic force coefficients vary significantly along the span of the wing. The results are compared with a jet flap configuration.

Krothapalli, A.↗
NASA NTRS1985

Heat transfer in aeropropulsion systems

Aeropropulsion heat transfer is reviewed. A research methodology based on a growing synergism between computations and experiments is examined. The aeropropulsion heat transfer arena is identified as high Reynolds number forced convection in a highly disturbed environment subject to strong gradients, body forces, abrupt geometry changes and high three dimensionality - all in an unsteady flow field. Numerous examples based on heat transfer to the aircraft gas turbine blade are presented to illustrate the types of heat transfer problems which are generic to aeropropulsion systems. The research focus of the near future in aeropropulsion heat transfer is projected.

Simoneau, R. J.↗
NASA NTRS1986

Composite tubes for the Space Station truss structure

The reference configuration of NASA's Space Station includes a large truss structure to support the various modules and solar arrays. This truss structure will be constructed from tubular members approximately 2 in. in diameter and up to 23 ft in length. The important design considerations for this structure are light weight, high stiffness, dimensional stability, and long-term durability. Continuous graphite fiber reinforced polymer matrix composite materials can meet the structural requirements, and are leading candidates for the tubular truss members. However, there are concerns regarding the durability of composites during the long-term exposure to atomic oxygen and thermal cycling that will be encountered during the Space Station service life. This paper discusses space environmental factors and their effect on composite materials, and provides estimates of the changes in mechanical and thermal properties of composites exposed to long-term Space Station conditions. The effect of low velocity impact and handling damage on composite tube properties is also discussed.

Bowles, David E.↗
NASA NTRS1989

Study of the integration of wind tunnel and computational methods for aerodynamic configurations

A study was conducted to determine the effectiveness of using a low-order panel code to estimate wind tunnel wall corrections. The corrections were found by two computations. The first computation included the test model and the surrounding wind tunnel walls, while in the second computation the wind tunnel walls were removed. The difference between the force and moment coefficients obtained by comparing these two cases allowed the determination of the wall corrections. The technique was verified by matching the test-section, wall-pressure signature from a wind tunnel test with the signature predicted by the panel code. To prove the viability of the technique, two cases were considered. The first was a two-dimensional high-lift wing with a flap that was tested in the 7- by 10-foot wind tunnel at NASA Ames Research Center. The second was a 1/32-scale model of the F/A-18 aircraft which was tested in the low-speed wind tunnel at San Diego State University. The panel code used was PMARC (Panel Method Ames Research Center). Results of this study indicate that the proposed wind tunnel wall correction method is comparable to other methods and that it also inherently includes the corrections due to model blockage and wing lift.

Browne, Lindsey E.↗
NASA NTRS1989

Investigation of CAST-10-2/DOA 2 airfoil in NAE high Reynolds number two-dimensional test facility

A common airfoil model with the CAST 10-2/DOA-2 profile and 228 mm (9 inches) chord length was tested. The tests performed in NAE covered the Mach numbers from 0.3 to 0.8 and Reynolds numbers from 10 to 30 million. The model was tested with transition free and with transition fixed at 5 percent chord for both the upper and the lower surfaces. The data obtained were analyzed for the effects of Reynolds number, transition fixing and Mach number. The role of the boundary layer on the displacement effect, the interaction with the shock wave and the trailing edge separation are examined. The results are summarized as follows: (1) the airfoil performance depends strongly on Reynolds number and transition fixing; (2) with transition fixed, the aerodynamic quantities such as lift, pitching moment and drag show a monotonic variation with Reynolds number; (3) with transition free, the aerodynamic quantities vary less regularly with Reynolds number and a slight parametric dependency is shown. The weak dependency is due to the compensatory effect of the forward shift of the transition position and the thinning of the turbulent boundary layer as Reynolds number increases; (4) the shock Mach number and the shock position are weakly dependent on Reynolds number; and (5) the long extent of the laminar boundary layer at transonic speeds reduces the drag appreciably at low Reynolds numbers. The drag bucket around the design Mach number can be observed below Reynolds number 15 million.

Chan, Y. Y.↗
NASA NTRS1990

Global simulation of the solar wind-magnetosphere interaction - The importance of its numerical validity

This paper examines the global interaction of the solar wind with the geomagnetic field, using a newly developed three-dimensional high-precision MHD simulation code which employs the fourth-order Runge-Kutta-Gill scheme in time and the direct finite-difference method in space, and which allows much less numerical error than the conventional code. The simulation reveals in detail the formation processes of the magnetosphere and the bow shock, as well as the plasma sheet formation process. It is shown that, contrary to the conventional understanding, no Kelvin-Helmholtz instability occurs along the magnetopause in an ideal MHD.

Watanabe, K.↗
NASA NTRS1990

Exploration of operator method digital optical computers for application to NASA

Digital optical computer design has been focused primarily towards parallel (single point-to-point interconnection) implementation. This architecture is compared to currently developing VHSIC systems. Using demonstrated multichannel acousto-optic devices, a figure of merit can be formulated. The focus is on a figure of merit termed Gate Interconnect Bandwidth Product (GIBP). Conventional parallel optical digital computer architecture demonstrates only marginal competitiveness at best when compared to projected semiconductor implements. Global, analog global, quasi-digital, and full digital interconnects are briefly examined as alternative to parallel digital computer architecture. Digital optical computing is becoming a very tough competitor to semiconductor technology since it can support a very high degree of three dimensional interconnect density and high degrees of Fan-In without capacitive loading effects at very low power consumption levels.

Source record↗
NASA NTRS1990

CFD for hypersonic propulsion

An overview is given of research activity on the application of computational fluid dynamics (CDF) for hypersonic propulsion systems. After the initial consideration of the highly integrated nature of air-breathing hypersonic engines and airframe, attention is directed toward computations carried out for the components of the engine. A generic inlet configuration is considered in order to demonstrate the highly three dimensional viscous flow behavior occurring within rectangular inlets. Reacting flow computations for simple jet injection as well as for more complex combustion chambers are then discussed in order to show the capability of viscous finite rate chemical reaction computer simulations. Finally, the nozzle flow fields are demonstrated, showing the existence of complex shear layers and shock structure in the exhaust plume. The general issues associated with code validation as well as the specific issue associated with the use of CFD for design are discussed. A prognosis for the success of CFD in the design of future propulsion systems is offered.

Povinelli, Louis A.↗
NASA NTRS1992

Distributed digital signal processors for multi-body flexible structures

Multi-body flexible structures, such as those currently under investigation in spacecraft design, are large scale (high-order) dimensional systems. Controlling and filtering such structures is a computationally complex problem. This is particularly important when many sensors and actuators are located along the structure and need to be processed in real time. This report summarizes research activity focused on solving the signal processing (that is, information processing) issues of multi-body structures. A distributed architecture is developed in which single loop processors are employed for local filtering and control. By implementing such a philosophy with an embedded controller configuration, a supervising controller may be used to process global data and make global decisions as the local devices are processing local information. A hardware testbed, a position controller system for a servo motor, is employed to illustrate the capabilities of the embedded controller structure. Several filtering and control structures which can be modeled as rational functions can be implemented on the system developed in this research effort. Thus the results of the study provide a support tool for many Control/Structure Interaction (CSI) NASA testbeds such as the Evolutionary model and the nine-bay truss structure.

Lee, Gordon K. F.↗
NASA NTRS1992

Future experimental needs in low-speed aerodynamics

This paper presents a review of future experimental needs in low-speed aerodynamic research. Emphasis is on fixed wind aircraft and the review uses the anticipated technical needs of subsonic transport aircraft and supersonic transport aircraft to establish and prioritize future low-speed experimental needs and directions. These technical needs, combined with a continuing improvement in computational capability, suggest changes in the experimental capabilities and adjustments in the use of existing capabilities. Three factors emerge that will have a major influence on the future directions for low-speed aerodynamic research: a recognition of the significance of three-dimensional high-lift aerodynamics, the increasing importance of aeroacoustics, and additional emphasis on the importance of propulsion/airframe integration. These analyses are combined with a review of the status of experimental capabilities in low-speed aerodynamic research to suggest future directions in the development and utilization of advanced instrumentation, test techniques, and test capabilities.

Olson, Lawrence E.↗
NASA NTRS1990

Effect of structure and morphology on thermal and electrical properties of polycarbonate film capacitors

Research is reported to identify polycarbonate (PC) film characteristics and fabrication procedures which extend the reliable performance range of PC capacitors to 125 C without derating, and establish quality control techniques and transfer technology to US PC film manufacturers. The approach chosen to solve these problems was to develop techniques for fabricating biaxially oriented (BX) 2 microns or thinner PC film with a low dissipation factor up to 140 C; isotropic dimensional stability; high crystallinity; and high voltage breakdown strength. The PC film structure and morphology was then correlated to thermal and electrical capacitor behavior. Analytical techniques were developed to monitor film quality during capacitor fabrication, and as a result, excellent performance was demonstrated during initial capacitor testing.

Yen, S. P. S.↗
NASA NTRS1992

The void spectrum in two-dimensional numerical simulations of gravitational clustering

An algorithm for deriving a spectrum of void sizes from two-dimensional high-resolution numerical simulations of gravitational clustering is tested, and it is verified that it produces the correct results where those results can be anticipated. The method is used to study the growth of voids as clustering proceeds. It is found that the most stable indicator of the characteristic void 'size' in the simulations is the mean fractional area covered by voids of diameter d, in a density field smoothed at its correlation length. Very accurate scaling behavior is found in power-law numerical models as they evolve. Eventually, this scaling breaks down as the nonlinearity reaches larger scales. It is shown that this breakdown is a manifestation of the undesirable effect of boundary conditions on simulations, even with the very large dynamic range possible here. A simple criterion is suggested for deciding when simulations with modest large-scale power may systematically underestimate the frequency of larger voids.

Kauffmann, Guinevere↗
NASA NTRS1992

Experimental study of the flow field inside a whirling annular seal

The flow field inside a whirling annular seal was measured using a 3-D Laser Doppler Anemometer (LDA) system. The seal investigated has a clearance of 1.27 mm, a length of 37.3 mm, and is mounted on a drive shaft with a 50 percent eccentricity ratio. This results in the rotor whirling at the same speed as the shaft rotation (whirl ratio = 1.0). The seal is operated at Reynolds number of 12,000 and a Taylor number of 6,300 (3,600 rpm). The 3-D LDA system is equipped with a rotary encoding system which is used to produce phase averaged measurements of the entire mean velocity vector field and Reynolds stress tensor field from 0.13 mm upstream to 0.13 mm downstream of the seal. The mean velocity field reveals a highly three dimensional flow field with large radial velocities near the inlet of the seal as well as a recirculation zone on the rotor surface. The location of maximum mean axial velocity migrates from the pressure side of the rotor at the inlet to the suction side at turbulence kinetic energy. However, turbulence production and dissipation attain equilibrium fairly quickly with remaining relatively constant over the last half of the seal.

Morrison, Gerald L.↗
NASA NTRS1992

The neutral circulation in the vicinity of a stable auroral arc

The effects of asymmetric potential distributions, arc-neutral feedback, and cross-arc winds on the neutral circulation near auroral arc were examined using a sophisticated two-dimensional high-resolution model of the neutral atmosphere which was preconditioned by allowing weak diffuse aurora to exist prior to the formation of an arc. Simulations were performed with asymmetric potential structures and with an initial state which was warmed and accelerated due to a preexisting diffuse aurora, as well as with arc-zonal wind feedback and with large-scale cross-arc flow. It is shown that, with a preexisting zonal flow and asymmetrical arc structures, strong zonal winds are generated within the arc. Simulations with the arc-zonal feedback indicate that the effect of feedback is not large because of the limited duration of an arc. Simulations with a strong large-scale cross-arc wind indicate that the zonal wind is not strongly sensitive to the large-scale wind.

Walterscheid, R. L.↗