SEARCH · Engineering Papers

Results for “grain shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1996

A study of dusty nonradiative shock waves

A dynamic theoretical model of grain evolution through steady-state nonradiative shock waves in the Cygnus Loop and Puppis A supernova remnants was constructed. Data from the Rosat position sensitive proportional counter (PSPC) and the Infrared Astronomical Satellite (IRAS) were used. A theoretical model of the grain evolution was developed by using the steady-state nonradiative shocks. Predictions were made concerning the X-ray spectrum emanating from a post-shock plasma were made. The fitting of the model predictions to the spectral shape of the Cygnus Loop X-ray emissions is discussed.

Vancura, O.↗

NASA NTRS2015

NASAs Evolvable Mars Campaign: Mars Moons Robotic Precursor

Human exploration missions to the moons of Mars are being considered within NASA's Evolvable Mars Campaign (EMC) as an intermediate step for eventual human exploration and pioneering of the surface of Mars. A range of mission architectures is being evaluated in which human crews would explore one or both moons for as little as 14 days or for as long as 500 days with a variety of orbital and surface habitation and mobility options being considered. Relatively little is known about the orbital, surface, or subsurface characteristics of either moon. This makes them interesting but challenging destinations for human exploration missions during which crewmembers must be able to effectively conduct scientific exploration without being exposed to undue risks due to radiation, dust, micrometeoroids, or other hazards. A robotic precursor mission to one or both moons will be required to provide data necessary for the design and operation of subsequent human systems and for the identification and prioritization of scientific exploration objectives. This paper identifies and discusses considerations for the design of such a precursor mission based on current human mission architectures. Objectives of a Mars' moon precursor in support of human missions are expected to include: 1) identifying hazards on the surface and the orbital environment at up to 50-km distant retrograde orbits; 2) collecting data on physical characteristics for planning of detailed human proximity and surface operations; 3) performing remote sensing and in situ science investigations to refine and focus future human scientific activities; and 4) prospecting for in situ resource utilization. These precursor objectives can be met through a combination or remote sensing (orbital) and in-situ (surface) measurements. Analysis of spacecraft downlink signals using radio science techniques would measure the moon's mass, mass distribution, and gravity field, which will be necessary to enable trajectory planning. Laser altimetry would precisely measure the moon's shape and improve the accuracy of radio science measurements. A telescopic imaging camera would map the moon at submeter resolution and photograph selected areas of interest at subcentimeter resolution and a visible and near-infrared (0.4-3.0 mm) imaging spectrograph would produce a global map of mineral composition variations at a resolution of tens of meters and maps of selected areas of interest at meter resolution. Additional remote sensing capabilities could include a thermal infrared imager (heat flow, thermal inertia, and grain size distributions), a gamma-ray and neutron detector (atomic composition), a ground-penetrating radar (internal structure), and a magnetometer and Langmuir probe (magnetic properties and plasma field). Once on the surface of Phobos or Deimos, necessary instrumentation would include a penetrometer (regolith compressive strength), a motion-imagery camera (to observe the penetrometer tests before, during, and after contact), a dust-adhesion witness plate and camera (dust levitation), a microimager (dust particle sizes and shapes), and an alpha-proton-X-ray, X-ray fluorescence, Mossbauer, or Raman spectrometer (atomic and mineral composition of surface materials) and an optional temperature probe (regolith thermal properties). A variety of robotic mission design options to enable both orbital and surface measurements are being considered that include fully integrated and modular approaches. In-situ measurements from at least one surface location would be required, with additional measurement locations possible through use of multiple landers, through propulsive relocation of a single lander, or through electromechanical surface translation by a walking or hopping lander vehicle, which could also serve to evaluate such mobility capabilities for subsequent human missions. Preliminary orbital analysis suggests that remote sensing would likely be performed while in a distant retrograde orbit around the target moon. Mission design options to enable characterization of both Mars’ moons in a single mission are also being studied.

Gernhardt, Michael L.↗

NASA NTRS1974

On the irradiation history and origin of gas-rich meteorites

Transmission electron microscope study of the track density gradients and irradiation geometries of track-rich grains and chondrules in sections of Fayetteville and Kapoeta, and in sections of lunar breccias and grains from lunar soil. A substantial fraction (50 to 90%) of the meteoritic track-rich grains and chondrules show evidence of having been irradiated anisotropically in their different faces, as would be expected for irradiation on the surface of a parent body. The observations thus support the hypothesis that the irradiation of these grains and chondrules took place on the regoliths of asteroidal-sized bodies. Measurements of steepest track density gradients indicate that, while there are finite differences between spectra exhibited by individual gas-rich meteorites, the average solar flare spectral shapes have been similar over the last 4 b.y. or so.

Rajan, R. S.↗

NASA NTRS1976

Amoeboid olivine aggregates in the Allende meteorite

Greyish-brown irregularly-shaped aggregates composed predominantly of olivine make up nearly 2% of the Allende meteorite by volume. Many of the aggregates are constructed of subspherical lumps of micron-sized crystals of olivine, pyroxene, nepheline and sodalite surrounded by coarser-grained olivine. Rarely, anorthite, spinel and perovskite are also present. The olivine ranges in composition from Fo64 to Fo99. Pyroxenes range from aluminous diopside to hedenbergite to very Al-rich and Ti-Al-rich varieties. The nepheline contains 1.6-2.4% K2O and 1.6-5.2% CaO but the sodalite is significantly poorer in these elements. The spinel contains 2.1-13.4% FeO. Textural information and oxygen isotopic data suggest that the aggregates are composed of primary, solid condensates from the solar nebula. The perovskite, spinel and Ti-Al-rich pyroxenes are the remains of high-temperature condensates, but the olivine compositions and the presence of feldspathoids indicate that some of the grains continued to react with the solar nebular vapor in the temperature range 500-900 K.

Grossman, L.↗

NASA NTRS2001

Sedimentation along the Eastern Chenier Plain Coast: Down Drift Impact of a Delta Complex Shift

The Mississippi River Chenier Plain is a shore parallel landform (down-drift from the Atchafalaya distributary of the Mississippi River) consisting of an alternating series of transgressive sand-shell ridges and regressive, progradational mudflats. The late 1940s shift of 1/3 of the flow of the Mississippi to the newly developing Atchafalaya delta complex to the west has resulted in injection of the river waters and suspended sediment into the westward flowing currents of the coastal current system. This has reactivated the dormant processes of mud accumulation along this coast. These environmental circumstances have provided the opportunity to: (1) investigate the depositional processes of the prograding, fine grained, mud flat facies of the open Chenier main coast and (2) to test the hypothesis that the impacts of the frequent cold front passages of fall, winter and spring exceed those of the occasional and more localized hurricane in shaping the coast and powering the dominant sedimentary processes. We conducted field investigations with the benefit of multi - scale, time series environmental surveillance by remote sensing systems, including airborne and satellite sensors. These systems provided invaluable new information on areal geomorphic patterns and the behavior of the coastal waters. This is a classic case of weather impacting inner shelf waters and sediments and causing the development of a new landform. It is clear that mud flats of the eastern chenier plain are prograding seaward, as well as progressively growing in a westerly direction.

Huh, Oscar K.↗

NASA NTRSDate not supplied

Mineralogical, Elemental and Tomographic Reconnaissance Investigation for CLPS (“METRIC”)

METRIC comprises a suite of two instruments in a Lunar lander that perform X-ray diffraction (XRD) for mineral structure, X-ray fluorescence (XRF) for elemental composition, and X-ray Micro Computed Tomography (XCT) for 3D internal micromorphology. The instruments are accompanied by optical-near IR cameras to provide local geologic context. The Honeybee Robotics PlanetVac pneumatic sampling and transfer system [1],positioned on a lander footpad, will deliver sieved regolith to the X-ray instruments for analysis. The instrument suite is intended for delivery to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander. The METRICXRD/F instrument draws on heritage from the Mars Science Laboratory CheMin instrument [2] and improves upon the design in multiple ways [3]. Like CheMin, Rietveld refinement and full-pattern fitting of METRIC XRD data can identify minerals at a detection limit of ~1 wt.%, quantify their abundances when present at >3 wt.%, and determine mineral composition (e.g., Fo#in olivine) from lattice parameters for minerals present at >5 wt.%[4,5]. An optimized XRF geometry provides for improved detection and quantification of major, minor and trace elements. The METRIC XCT instrument is a miniaturized X-ray Computed Tomography scanner[6]. Lunar regolith is delivered to a 3 mm diameter, 10 mm long graphite tube inside the instrument. The tube is rotated through 360°in 0.9deg.incrementsand a divergent point source X-ray beam is directed through the material. A Charge Coupled Device (CCD)records attenuation images whose brightness and contrast area function of average atomic number and density. Quantitative data, including particle and void sizes, 3D particle shape parameters, modal volumes and pore geometry can be derived from the resulting 3D reconstructions(voxel resolution: 30 μm). Crystal morphologies derived from METRIC XCT data complement the bulk mineralogy determined by the METRIC XRD/F and provide a measure of grain size distribution for the different phases. Taken together, the METRIC instrument suite determines crystal structure, elemental composition and morphology, three principal characteristics of geological materials that are highly useful in determining the origin and subsequent processing of lunar regolith.

Moon↗

NASA NTRS2015

Fine-Grained Targets for Laser Synthesis of Carbon Nanotubes

A mechanically robust, binder-free, inexpensive target for laser synthesis of carbon nanotubes and a method for making same, comprising the steps of mixing prismatic edge natural flake graphite with a metal powder catalyst and pressing the graphite and metal powder mixture into a mold having a desired target shape.

Smith, Michael W.↗

NASA NTRS2017

Fine-Grained Targets for Laser Synthesis of Carbon Nanotubes

Smith, Michael W.↗

NASA NTRS1984

Ultraviolet observations of interstellar extinction near the Cepheus OB3 molecular cloud

New IUE observations and available data for O and B stars new Cep OB3 are presented, and extinction curves for the stars are derived. The differences in those curves are examined in detail, showing that while the level of the far-UV extinction differs greatly throughout the region, the shape of the 2175 A bump does not. The different curves form a family which can be parametrized by the strength of the bump per E(B-V). This suggests that some single physical process dominates the modification of the grains in the region. Evidence is presented which indicates that this process is related to the evolution of the grains once they emerge from the Cep OB3 molecular cloud. The practicality of using the strength of the bump per E(B-V) for dereddening stars in a region where the form of the UV extinction differs from place to place is demonstrated.

Massa, D.↗

NASA NTRS2008

Are Fullerenes Relevant to Cosmochemistry? A New Finding

The abundances of noble gases found in primitive, carbonaceous meteorites are unexpected when compared with our Sun. Known as Q-gases (Q for some unknown carrier dubbed quintessence ), this anomaly has remained a mystery since it was discovered in 1975. Q-gases are characterized by increasing depletions with decreasing atomic number (Z) relative to solar noble gases and normalized to 132Xe (Figure 1). This Q-gas mass fractionation is unexplained, and its investigation is important to understanding the origin of the solar system. However, the subject is fraught with controversy, in part due to the complex nature of Q and in part due to claims of some researchers that cannot be reproduced by other investigators. The topic is discussed in numerous places [e.g., 1-4], with models of Q falling into two basic categories, both involving carbon entrapment of noble gases. First (Group A), there is the conservative two-dimensional view that Q-gases are adsorbed or sorbed onto a "labyrinth" of graphite or carbon grains [5-9], or they undergo active capture onto growing surfaces [6]. Second (Group B), there is the view holding to the remarkable property of carbon discovered in 1985. Carbon can curl up into closed geometries of hexagon- and pentagon-shaped carbon-ring configurations, a property ignored completely by Group A. Group B thinks of Q as a three-dimensional structure of endohedral carbon cages like fullerenes, carbon onions, or some class of carbon nanotubes [3, 4, 10]. Group B does not exclude Group A effects.

Wilson, T. L.↗

NASA NTRS2003

Gravitational Effects on Distortion in Sintering

During sintering a powder compact gains strength through low-temperature interparticle bonding, usually induced by solid-state surface diffusion, followed by further strength contributions from high-temperature densification. In cases where a liquid phase forms, sintering densification is accelerated and shape retention is sustained while open pores remain and contribute capillary forces. Unfortunately, sintering densification requires the compact become thermally softened to a point where creep strain rates reach levels near 10(exp -2)/s when the liquid forms. On the other hand, thermal softening of the powder compact substantially reduces the strength at high temperatures. Therefore, the in situ strength evolution during sintering is a primary focus to separate compact densification (as required for high performance) with minimized distortion (as required for net-shaping). With respect to gravitation effects on distortion during sintering there are two points of substantial weakness - prior to significant interparticle bonding and during final pore closure. This research is focused on understanding the competition among interparticle neck growth, densification, thermal softening, grain boundary wetting, capillary effects associated with liquid wetting and residual porosity, and gravity. Most surprising is the apparent role of gravity, where the deviatoric stress acting on the powder structure induces skeletal formation that reduces distortion. In contrast with theory, microgravity samples exhibit more distortion yet fail to fully densify. Results are presented on the experimental concepts supporting an emerging model of sintering strength evolution that enables understanding of both distortion and densification. The experiments have relied on tungsten heavy alloys, various combinations of dihedral angle, pore size, initial porosity, liquid:solid ratio, and heating rates. On Earth, the dominant factor with respect to distortion is the starting body heterogeneity. Current modeling efforts are seeking some means to uniformly predict the distortion based on a starting pore structure heterogeneity parameter. Densification is largely unaffected by the initial pore structure, but distortion is highly variable, suggesting that nonuniform pore closure might be a significant parameter during sintering. With respect to flight experiments, plans include removal of the solid body forces acting on the solid grains, allowing stabilization of the pore structure and examination of the buoyancy effects with regard to distortion. In microgravity there is the surprising result that compacts do not densify, yet distort a factor that is contrary to all current sintering models. Densification without distortion during liquid phase sintering was achieved by manipulating microstructure and its evolution during sintering. Microstructure parameters such as the solid volume fraction, dihedral angle, initial porosity, and pore size were varied to measure densification and distortion behavior during LPS using W-Ni-Cu alloys. Green compacts were formed using ethylene-bis-stearamide as a pore-forming agent with the amount of polymer controlling the initial porosity. Different initial pore sizes were generated by varying the polymer particle size. Dihedral angle was varied by changing the Ni:Cu ratio in the alloys. Finally, the solid volume fraction was adjusted via the tungsten content. Distortion was quantified using profiles determined with a coordinate measuring machine to calculate a distortion parameter. Sintering results showed that solid volume fraction and dihedral angle are the dominant factors on densification and distortion during liquid phase sintering. Distortion decreases with increasing solid volume fraction and dihedral angle, while initial porosity and pore size have no observable effect on distortion at nearly full densification. Various strategies emerge to improve distortion control in liquid phase sintering.

German, Randall M.↗

NASA NTRS2019

Dust Formation in AGN Winds

Infrared observations of active galactic nuclei (AGNs) reveal emission from the putative dusty circumnuclear "torus" invoked by AGN unification, which is heated up by radiation from the central accreting black hole (BH).The strong 9.7 and 18 m silicate features observed in the AGN spectra, in both emission and absorption, further indicate the presence of such dusty environments. We present detailed calculations of the chemistry of silicate dust formation in AGN accretion disk winds. The winds considered herein are magnetohydrodynamic winds driven off the entire accretion disk domain that extends from the BH vicinity to the radius of BH influence, of order ~1-100 pc depending on the mass of the resident BH. Our results indicate that these winds provide conditions conducive to the formation of significant amounts of dust, especially for objects accreting close to their Eddington limit, making AGNs a significant source of dust in the universe, especially for luminous quasars. Our models justify the importance of an r1 density law in the winds for efficient formation and survival of dust grains. The dust production rate scales linearly with the mass of the central BH and varies as a power law of index between 2 and 2.5 with the dimensionless mass accretion rate. The resultant distribution of the dense dusty gas resembles atoroidal shape, with high column density and optical depths along the equatorial viewing angles, in agreement with the AGN unification picture

Arkaprabha Sarangi↗

NASA NTRS1973

The nature of dark-etching rims in meteoritic taenite.

Taenite fields when etched develop a cloudy brown rim with approximate compositional limits of 25 and 40% Ni. In iron meteorites this cloudy zone is only a few microns wide, with a sharp, high-Ni edge about 1 micron from the kamacite interface and a diffuse edge several microns from the central plessite. It is always present in irons unless the meteorite has been cosmically or terrestrially reheated. X-ray and electron diffraction of grains scratched from exceptionally larger areas of cloudy taenite in the mesosiderite Estherville show that this etching zone contains a fine exsolution of kamacite. Detailed electron-probe investigations of taenite in Estherville show that there is a step in the M-shaped Ni profile at the sharp, high-Ni edge of the cloudy region, the Ni dropping suddenly from approximately 45 to 42%. It is proposed that exsolution in the cloudy region effectively froze in the Ni profile at that temperature. On subsequent cooling only the clear outer taenite continued to equilibrate with the kamacite matrix, producing the kink in the M profile. Cloudy taenite is therefore a variety of plessite differing from the usual varieties in that it forms at lower temperatures in areas much richer in Ni, and the morphology is not crystallographically oriented. Its absence can provide a sensitive indication of reheating.

Scott, E. R. D.↗

NASA NTRS1988

Airborne 20-65 micron spectrophotometry of Comet Halley

Observations of Comet Halley with a grating spectrometer on board the Kuiper Airborne Observatory on four nights in Dec. 1985 to Apr. 1986 are reported. Low resolution 20 to 65 micrometer spectra of the nucleus with a 40 arcsec FWHM beam was obtained on 17 Dec. 1985, and on 15 and 17 Apr. 1986. On 20 Dec. 1985, only a 20 to 35 micrometer spectrum was obtained. Most of the data have been discussed in a paper where the continuum was dealt with. In that paper, models were fit to the continuum that showed that more micron sized particles of grain similar to amorphous carbon were needed to fit the spectrum than were allowed by the Vega SP-2 mass distribution, or that a fraction of the grains had to be made out of a material whose absorption efficiency fell steeper than lambda sup -1 for lambda greater than 20 micrometers. Spectra was also presented taken at several points on the coma on 15 Apr. which showed that the overall shape to the spectrum is the same in the coma. Tabulated values of the data and calibration curves are available. The spectral features are discussed.

Glaccum, William↗

NASA NTRS1990

Plastic superconductor bearings any size, any shape, 77 k and up

Friction free bearings at 77 k or higher are possible using the high T(sub c) copper oxide ceramic superconductors. The conventional method for making such bearings is to use a sintered ceramic monolith. This puts great restraints on size, shape and postforming machining. The material is hard and abrasive. It's possible to grind up ceramic superconductors and suspend the granules in a suitable matrix. Mechanical properties improve and are largely dependent on the binder. The Meissner effect is confined to individual grains containing electron vortices. Tracks, rails, levitation areas and bearings can be made this way with conventional plastic molding and extruding machines or by painting. The parts are easily machined. The sacrifice is in bulk electrical conductivity. A percolating wick feel for LN2 can be used to cool remote superconductors and large areas quite effectively. A hollow spheroid or cylinder of superconductor material can be molded with the internal surfaces shielded by the Meissner effect. It might be thought of as the dc magnetic analogue of the Faraday cage and the inside can be called the Meissner space. It's selective. The ac fields are transmitted with minor attenuation. Particle size and distribution have a profound effect on final magnetic and electrical characteristics.

Reick, Franklin G.↗

NASA NTRS1991

Plastic superconductor bearings any size-any shape: 77 K and up

'Friction free' bearings at 77 K or higher are possible using the high T(sub c) copper oxide ceramic superconductors. The conventional method for making such bearings is to use a sintered ceramic monolith. This puts great restraints on size, shape, and postforming machining. The material is hard and abrasive. It is possible to grind up ceramic superconductors and suspend the granules in a suitable matrix. Mechanical properties improve and are largely dependent on the binder. The Meissner effect is confined to individual grains containing electron vortices. Tracks, rails, levitation areas, and bearings can be made this way with conventional plastic molding and extruding machines or by painting. The parts are easily machined. The sacrifice is in bulk electrical conductivity. A percolating wick feed for LN2 is used to cool remote superconductors and large areas quite effectively. A hollow spheroid or cylinder of superconductor material is molded with the internal surfaces shielded by the Meissner effect. It can be thought of as the DC magnetic analog of the Faraday cage and the inside is the 'Meissner space'. It is selective. The AC fields are transmitted with minor attenuation. Particle size and distribution have a profound effect on final magnetic and electrical characteristics.

Reick, Franklin G.↗

NASA NTRS1993

Long-slit ultraviolet spectroscopy of Comet Austin (1990 V)

The spatial distributions of the brightest features in the far-UV spectrum of Comet Austin were measured, and it is found that they are generally similar to those found for Comet Halley during two rocket observations in 1986. As in Halley, the CO profile can be fit to a radial outflow profile for a source whose size is smaller than the instrumental spatial resolution. Neither the shape nor the magnitude of the extended atomic carbon profiles, however, can be satisfactorily explained by the photodissociation of CO. No evidence is found for an extended source of CO in the coma; thus, suggestions that the additional carbon can come directly from grains are difficult to accept since Austin is a low-dust comet. The presence of the O I 1356 A feature implies that there is a photoelectron excitation source in the coma. The measured O I 1304 A distribution is consistent with H2O being the dominant source of oxygen in the coma. The atomic sulfur profile matches that expected for a daughter product of relatively short-lived parents.

Sahnow, David J.↗

NASA NTRS2022

Resolving the fine structure in the energy landscapes of repeat proteins

Ankyrin (ANK) repeat proteins are coded by tandem occurrences of patterns with around 33 amino acids. They often mediate protein–protein interactions in a diversity of biological systems. These proteins have an elongated non-globular shape and often display complex folding mechanisms. This work investigates the energy landscape of representative proteins of this class made up of 3, 4 and 6 ANK repeats using the energy-landscape visualisation method (ELViM). By combining biased and unbiased coarse-grained molecular dynamics AWSEM simulations that sample conformations along the folding trajectories with the ELViM structure-based phase space, one finds a three-dimensional representation of the globally funnelled energy surface. In this representation, it is possible to delineate distinct folding pathways. We show that ELViMs can project, in a natural way, the intricacies of the highly dimensional energy landscapes encoded by the highly symmetric ankyrin repeat proteins into useful low-dimensional representations. These projections can discriminate between multiplicities of specific parallel folding mechanisms that otherwise can be hidden in oversimplified depictions.

Murilo N. Sanches↗