Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Advanced Compact Generation Module with Fish Safe Runner Technology

Hydropower is an important contributor of stable, load-leveling renewable energy to our national grid. Increasingly, the development of new hydropower facilities or the retrofit of existing ones hinges not only on minimizing costs but also environmental impact. In this report, the analysis and testing of a modular and scalable low-head hydropower generation design using Natel Energy’s Restoration Hydro Turbine is described. This design leverages many established industry approaches for compactness and efficiency while simultaneously allowing for safe downstream fish passage through the turbines themselves. This unique approach reduces overall hydropower facility costs and enables a simpler inclusive method of project design and operation. To assess this design, mechanical and fluid computational analyses were used to study and optimize key parameters. Passage tests of important migratory species (salmonids, American eel) were conducted through representative turbines. The unique propeller geometry of the fish-safe Restoration Hydro Turbine was subjected to detailed design and testing using advanced manufacturing composite techniques. Comprehensive module cost models were developed and assessed alongside hydraulic efficiency. The results of this project show promising and economical applications for downstream passage offish through Restoration Hydro Turbine modules.

13 HYDRO ENERGY↗

Fractionation of Filamentous Algae from Mixed Biofilms

Filamentous algae, which grow in long, hair-like filaments within biofilms, play a crucial role in wastewater treatment due to their ability to produce significant biomass and their resistance to predation compared to traditional microalgal treatments. These algae can effectively uptake and utilize pollutants, particularly excessive nitrogen (ammonia, nitrate, nitrite) and phosphorus (phosphate), making filamentous algae valuable for wastewater treatment, as well as bioethanol and biodiesel production due to high lipid productions. However, each algal species possesses different capacities, necessitating a thorough genetic identification and understanding of each community. A major challenge in accurately assessing these communities is the lack of coverage in large sequencing databases which can lead to misrepresentation of the true composition and abundance of organisms and overall sequencing bias. To address this, I evaluated chemical and physical techniques for separating filamentous algae from mixed biofilms to achieve clean genetic sequencing results. I employed pH washing (0.001M HCl, 0.001M HCl, DiH2O, 0.0001M HCl, 0.001M HCl) for chemical treatment, followed by physical separation through centrifugation (5000rpm, 6500rpm) or filtration (2mm, 250um, 75um). The most successful method was deionized water washing, which yielded clear differences across stacked filters; the 2mm filtrate showed high levels of filamentous algae, with microalgae eluting in the 75um filtrate or remaining within agglutinations of algae larger filters. Base washing eluted the highest concentrations of microalgae, with larger filter sizes retaining more filamentous algae, indicating the breakdown of extracellular polymeric substances (EPS). Our downstream plans include sending the high-throughput next-generation sequencing to confirm the purity and ratios of filamentous and non-filamentous algae, as well as bacteria present, thereby validating the success of our treatments. Potential applications include creating community-based fractions for analysis, refining current sequencing data with clearer isolations, and generating designer biofilms to enhance our understanding of community interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Next-Generation Electric Motors and Electromagnetic Devices (CRADA Final Report)

As part of the Cyclotron Road program, the Foli Research team investigated electric motors and other electromagnetic devices additively manufactured by depositing fine conducting wire onto a substrate. By leveraging modern motion control and efficient upstream manufacturing processes, the team explored using geometric control and turnkey production comparable to printed circuit board manufacturing, aiming at ten-fold improvements in signal density, while eliminating the material use, cost, and complexity overheads of subtractive processes at large scales. Owing to the achievable density and additive scaling, disparate components became monolithic, and disparate processes were combined with the aim of reducing development costs, uncertainties, and timelines. When applied to electric motors, this technology may enable agile manufacturing of next-generation designs, with dramatic increases in achievable power density and material utilization. Electric motors represent the single largest user of electricity in the U.S. and a critical component of decarbonized infrastructure. Despite this significance, the manufacturing of motors and other electromagnetic devices remains capital-intensive, labor-intensive, and performance-limiting. Advanced manufacturing processes were required to produce high-performance, low-cost, application-specific electric motors and electromagnetic devices to support an electrified future.

42 ENGINEERING↗

Impact of particle size and particle-flow-wall coupling on pressurized oxy-combustion in the down-fired burner

Concerns over climate change have led to numerous efforts in developing low-carbon energy technologies. Pressurized oxy-combustion (POC) is a promising candidate to reduce carbon emissions in power generation. Designing an effective burner plays a vital role in developing new coal combustion technologies. Because of the high pressure, the volume fraction of coal particles at the fuel inlet of the burner of a pressurized oxy-combustor is close or even higher than the maximum limit that commercial CFD codes (e.g., ANSYS FLUENT) can handle. At this high particle volume fraction, the interactions among particles, fluid flow, and wall need to be re-evaluated. The present computational work is the first step of a systematic analysis of the particle influence, like releasing method, releasing locating, and particle size, in a pilot-scale POC combustor, developed at Washington University in St. Louis (WUSTL). In a POC process, pulverized coal is burned under elevated pressure and O2-CO2 environment. Specifically, a 15-bar, 100 kWth, POC combustor is modeled employing ANSYS FLUENT, using Reynolds-averaged Navier-Stokes (RANS) modeling. It is revealed that for this pilot-scale, pressurized burner, velocity profiles of the near-wall region in this POC facility exhibit some discrepancy against the near-wall turbulent flow velocity profile. In order to investigate the particle influence in the near-wall region, particle releasing location will be investigated. Numerical simulation results exhibit the coupling effect of turbulence flow and particles in this case. The particle size also demonstrates a great effect on particle trajectory, then further has an impact on flame stability and temperature.

Li, Lei↗

Evaluating the Applicability of Data on Total Solar-Radiation Intensity Derived from Various Sources of Actinometric Information

In designing generating solar-engineering devices, the first priority is the predesign study of the potential of local resources of solar energy at the places where they may be located. Currently, actinometric information is obtained in several ways. They include direct measurement of solar-radiation characteristics at meteorological stations or from satellites and analytical methods for calculating intensity of solar radiation. Despite the significant number of sources of actinometric information, it seems impossible to evaluate the potential of incoming solar energy in the region, to substantiate the composition and parameters of solar-power-plant equipment, and to predict its operation at the initial stage. Using the example of the town of Kamyshin in Volgograd oblast, the sufficiency of required actinometric information is analyzed for further solar-engineering calculations and the data accuracy and limits of their applicability are estimated.

14 SOLAR ENERGY↗

Dynamic response of high-frequency pressure transducers to large amplitude sinusoidal pressure oscillations

Dynamic response characteristics of six currently used dynamic pressure transducers were investigated by using a large-amplitude sinusoidal-pressure generator. Frequencies between 1 and 15 kilohertz with corresponding peak-to-peak pressure-oscillation amplitudes ranging between 73 and 8 percent of bias pressure and bias pressures between 15 and 300 psia were utilized. Amplitude-ratio data as functions of frequency and pressure level are given for all transducers. The generator design and performance and associated instrumentation are described.

Robinson, R. E.↗

Space shuttle launch vehicle performance trajectory, exchange ratios, and dispersion analysis

A baseline space shuttle performance trajectory for Mission 3A launched from WTR has been generated. Design constraints of maximum dynamic pressure, longitudinal acceleration, and delivered payload were satisfied. Payload exchange ratios are presented with explanation on use. Design envelopes of dynamic pressure, SRB staging point, aerodynamic heating and flight performance reserves are calculated and included.

Toelle, R. G.↗

Ultrasonic Doppler measurement of renal artery blood flow

Studies were made of (1) blood flow redistribution during lower body negative pressure (LBNP), (2) the profile of blood flow across the mitral annulus of the heart (both perpendicular and parallel to the commissures), (3) testing and evaluation of a number of pulsed Doppler systems, (4) acute calibration of perivascular Doppler transducers, (5) redesign of the mitral flow transducers to improve reliability and ease of construction, and (6) a frequency offset generator designed for use in distinguishing forward and reverse components of blood flow by producing frequencies above and below the offset frequency. Finally methodology was developed and initial results were obtained from a computer analysis of time-varying Doppler spectra.

Freund, W. R.↗

An advanced concept that promises ecological and economic viability

The actuality of supersonic commercial service being provided by Concorde is demonstrating to the world the advantages offered by supersonic travel for both business and recreation. Public acceptance will gradually and persistently stimulate interest to proceed with a second generation design that meets updated economic and ecological standards. It is estimated that this concept could operate profitably on world-wide routes with a revenue structure based upon economy fares. Airplanes will meet all present day ecological requirements regarding noise and emissions.

Wright, B. R.↗

Water electrolysis system - H2 and O2 generation

An oxygen generation system design based on the static feed water electrolysis concept is described. The system is designed to generate 4.20 kg/d of oxygen to satisfy the metabolic needs of a three-person crew, to compensate for spacecraft leakage, and to provide the oxygen required by the electrochemical depolarized CO2 concentrator. The system has a fixed hardware weight of 75 kg, occupies a volume of 0.11 cu m, and requires only 1.1 kw of electrical power. The static feed electrolysis concept is discussed, and experimental data on the high-performance electrode are presented.

Schubert, F. H.↗

Full scale lightning test technique

A test technique was developed for applying a full scale mean value (30 kiloampere peak) simulated lightning return stroke current on a complete flight ready aircraft to assess the threat of lightning to aircraft electrical circuits. A computer-aided generator design was used to establish the parameters of the test system. Data from previous work done on development of low inductance current paths determined the basic system configuration.

Walko, L. C.↗