Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “future accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

A substandard candle: the low-$$\nu $$ method at few-GeV neutrino energies

Abstract As accelerator-based neutrino oscillation experiments improve oscillation parameter constraints with more data, control over systematic uncertainties on the incoming neutrino flux and interaction models is increasingly important. The intense beams offered by modern experiments permit a variety of options to constrain the flux using in situ “standard candle” measurements. These standard candles must use very well understood interaction processes to avoid introducing additional interaction model dependence. One option often discussed in this context is the “low- $$\nu $$ ν ” method, which is designed to isolate neutrino interactions where there is low energy-transfer to the nucleus, such that the interaction cross section is expected to be approximately constant as a function of neutrino energy. The shape of the low-energy transfer event sample can then be used to extract the flux shape. Applications of the method at high neutrino energies (many tens of GeV) are well understood. However, the applicability of the method at the lower energies of current and future few-GeV accelerator neutrino experiments remains unclear due to the presence of nuclear and form-factor effects inherent in the interaction models.In this analysis we examine the prospects for improving constraints on the accelerator neutrino fluxes in situ with the low- $$\nu $$ ν method in an experiment-independent way, using (anti)neutrino interactions on argon and hydrocarbon targets from the GENIE, NEUT, NuWro and GiBUU event generators. We begin by investigating the extent to which deviations from the constant cross-section assumption are dependent on poorly understood aspects of the neutrino interaction model. We then assess whether a low energy-transfer event sample can be confidently identified using experimentally accessible observables. We finally consider how the practicalities of reconstructing the energy spectrum of interacting neutrinos in realistic detectors might further limit the utility of low- $$\nu $$ ν flux constraints. The results show that flux constraints from the low- $$\nu $$ ν method would be severely dependent on the interaction model assumptions used in an analysis of neutrinos with energies below 5 GeV, and anti-neutrinos below at least 15 GeV. The spread of model predictions show that a low- $$\nu $$ ν analysis is unlikely to offer much improvement on typical neutrino flux uncertainties, even with a perfect detector. Notably—running counter to the assumption inherent to the low- $$\nu $$ ν method—the model-dependence increases with decreasing energy transfer for experiments in the few-GeV region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron Cloud Simulations for the Electron-Ion Collider in Brookhaven National Laboratory

For high-intensity circular accelerators and storage rings, if the secondary electron emission yield (SEY) of the vacuum chamber surfaces is high, an EC (Electron Cloud) could build up with the passage of the circulating beam. The presence of EC can strongly affect the beam quality, such as transverse instabilities, transverse emittance growth, and beam loss. Furthermore, the heat load from EC can exceed the available cryogenic capability. For the RHIC superconducting (SC) arc magnets, to be used for the hadron storage ring of the Electron-Ion Collider (EIC), the dynamic heat load budget is 0.5 W/m to the 4.5 K stainless steel beam pipe. This can limit the maximum beam bunches or intensity of the EIC, hence diminishing the luminosity provided by the EIC. The EC has affected the beam instability and significantly contributed to cryogenic heat load in the Large Hadron Collider (LHC). Positron storage rings for which ECs have been a critical factor in the design and performance include KEKB in Japan and EC buildup remains one of the concerns for future high-intensity accelerators design. EC considerations have driven the SuperKEKB collider design and the positron damping ring for the proposed International Linear Collider (ILC). The LHC luminosity upgrade is contingent on reducing the bunch spacing to 25 ns; at this bunch spacing, severe EC buildup has been observed. The success of the upgrade is likely contingent on limiting EC buildup. To study the EC heat load, we did some EC simulations with PyECLOUD code for the dipole, quadrupole, sextupole magnets, and the warm (drift) section of the EIC hadron storage ring. PyECLOUD is an EC simulation code developed by CERN. The code has been validated and used to study EC in the LHC, SPS, and PS. To eliminate EC buildup, the sources of electrons must be minimized. First, we will reduce the production of electrons due to residual gas ionization by specifying the maximum gas density, which requires a vacuum chamber with low electron-stimulated desorption (ESD) yields and a sufficient (preferably distributed) pumping speed. Second, we should reduce the secondary electrons with a lower secondary electron yield (SEY) material.

43 PARTICLE ACCELERATORS↗

Electron lenses: historical overview and outlook

The first electron lenses — understood as "lenses made of electrons" rather than "lenses to focus electrons" — were envisioned in the mid-1990s and built in the early 2000s for compensation of beam-beam effects in the Tevatron proton-antiproton collider. Since then, the lenses — a novel instrument for high-energy particle accelerators — have been added to the toolbox of modern beam facilities, being particularly useful for the energy frontier superconducting hadron colliders ("supercolliders"). In this article we briefly present the history of ideas and developments toward effective use of low-energy high-current bright electron beams in high energy accelerators and discuss the promise of their future applications.

43 PARTICLE ACCELERATORS↗

Characterizing Density and Spatial Distribution of Trap States in Ta 3 N 5 Thin Films for Rational Defect Passivation

Tantalum nitride (Ta 3 N 5 ) has gained significant attention as a potential photoanode material, yet it has been challenged by material quality issues. Defect-induced trap states are detrimental to the performance of any semiconductor material. Beyond influencing the performance of Ta 3 N 5 films, defects can also accelerate the degradation in water during desired electrochemical applications. Defect passivation has provided an enormous boost to the development of many semiconductor materials but is currently in its infancy for Ta 3 N 5 . This is in part due to a lack of experimental understanding regarding the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. Here, we employ drive-level capacitance profiling (DLCP) to experimentally resolve the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. The density of deeper energetic traps is found to reach ∼2.5 to 6 × 10 22 cm –3 at the interfaces of neat Ta 3 N 5 thin films, over an order of magnitude greater than the bulk. In addition to the spatial profile of deep trap states, we report neat Ta 3 N 5 thin films to be highly n-type in nature, owning a free carrier density of ∼9.74 × 10 17 cm –3 . This information, coupled with the present understanding of native oxide layers on Ta 3 N 5 , has facilitated the rational design of a targeted passivation strategy that simultaneously provides a means for catalyst immobilization. Loading catalyst via silatrane moieties suppresses the density of defects at the surface of Ta 3 N 5 thin films by two orders of magnitude, while also reducing the free carrier density of films by over one order of magnitude, effectively dedoping the films to ∼2.40 × 10 16 cm –3 . The surface passivation of Ta 3 N 5 films translates to suppressed defect-induced trapping and recombination of photoexcited carriers, as determined through absorption, photoluminescence, and transient photovoltage. Here, this illustrates how developing a deeper understanding of the distribution and influence of defects in Ta 3 N 5 thin films has the potential to guide future works and ultimately accelerate the integration and development of high-performance Ta 3 N 5 thin film devices.

defect passivation↗

Geometrical optics without singularities: using the ray time as the coordinate space

Geometrical optics (GO) is widely used for reduced modelling of waves in plasmas, but it fails near reflection points, where it predicts a spurious singularity of the wave amplitude. We show how to avoid this singularity by adopting a different representation of the wave equation. Instead of the physical coordinate 𝑥 and the wavevector 𝑘, we use the ray time 𝜏 as the new canonical coordinate and the ray energy ℎ as the associated canonical momentum. To derive the envelope equation in the 𝜏-representation, we construct the Weyl symbol calculus on the (𝜏,ℎ) space and show that the corresponding Weyl symbols are related to their (𝑥,𝑘) counterparts by the Airy transform. This allows us to express the coefficients in the envelope equation through the known properties of the original dispersion operator. When necessary, solutions of this equation can be mapped to the 𝑥-space using a generalised metaplectic transform. However, the field per se might not even be needed in practice. Instead, knowing the corresponding Wigner function usually suffices for linear and quasilinear calculations. As a Weyl symbol itself, the Wigner function can be mapped analytically, using the aforementioned Airy transform. We show that the standard Airy patterns that form in regions where conventional GO fails are successfully reproduced within metaplectic GO (MGO) simply by remapping the field from the 𝜏-space to the 𝑥-space. An extension to mode-converting waves is also presented. This formulation, which we call generalised MGO, can be particularly useful, for example, for reduced modelling of the O–X conversion in inhomogeneous plasma near the critical density, an effect that is important for fusion applications and also occurs in the ionosphere. Overall, MGO can replace GO for any practical purposes, because it better handles cutoffs and is similar otherwise.

plasma waves↗

Named Entity Recognition and Normalization Applied to Large-Scale Information Extraction from the Materials Science Literature

The number of published materials science articles has increased manyfold over the past few decades. Now, a major bottleneck in the materials discovery pipeline arises in connecting new results with the previously established literature. A potential solution to this problem is to map the unstructured raw text of published articles onto structured database entries that allow for programmatic querying. To this end, we apply text mining with named entity recognition (NER) for large-scale information extraction from the published materials science literature. The NER model is trained to extract summary-level information from materials science documents, including inorganic material mentions, sample descriptors, phase labels, material properties and applications, as well as any synthesis and characterization methods used. Our classifier achieves an accuracy (f 1 ) of 87%, and is applied to information extraction from 3.27 million materials science abstracts. We extract more than 80 million materials-science-related named entities, and the content of each abstract is represented as a database entry in a structured format. We demonstrate that simple database queries can be used to answer complex "meta-questions" of the published literature that would have previously required laborious, manual literature searches to answer. Finally, all of our data and functionality has been made freely available on our Github ( https://github.com/materialsintelligence/matscholar ) and website ( http://matscholar.com ), and we expect these results to accelerate the pace of future materials science discovery.

36 MATERIALS SCIENCE↗

Constraint on the matter–antimatter symmetry-violating phase in neutrino oscillations

The charge-conjugation and parity-reversal (CP) symmetry of fundamental particles is a symmetry between matter and antimatter. Violation of this CP symmetry was first observed in 1964, and CP violation in the weak interactions of quarks was soon established. Sakharov proposed that CP violation is necessary to explain the observed imbalance of matter and antimatter abundance in the Universe. Yet, CP violation in quarks is too small to support this explanation. So far, CP violation has not been observed in non-quark elementary particle systems. It has been shown that CP violation in leptons could generate the matter–antimatter disparity through a process called leptogenesis. Leptonic mixing, which appears in the standard model’s charged current interactions, provides a potential source of CP violation through a complex phase δ CP , which is required by some theoretical models of leptogenesis. This CP violation can be measured in muon neutrino to electron neutrino oscillations and the corresponding antineutrino oscillations, which are experimentally accessible using accelerator-produced beams as established by the Tokai-to-Kamioka (T2K) and NOvA experiments. Until now, the value of δ CP has not been substantially constrained by neutrino oscillation experiments. Here we report a measurement using long-baseline neutrino and antineutrino oscillations observed by the T2K experiment that shows a large increase in the neutrino oscillation probability, excluding values of δ CP that result in a large increase in the observed antineutrino oscillation probability at three standard deviations (3σ). The 3σ confidence interval for δ CP , which is cyclic and repeats every 2π, is [-3.41, -0.03] for the so-called normal mass ordering and [-2.54, -0.32] for the inverted mass ordering. Our findings indicate CP violation in leptons and our method enables sensitive searches for matter–antimatter asymmetry in neutrino oscillations using accelerator-produced neutrino beams. Future measurements with larger datasets will test whether leptonic CP violation is larger than the CP violation in quarks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-energy ion beams generated with high efficiency using laser-driven 3D microstructures

Laser-driven ion acceleration in plasma is being proposed as a source of ion beams with a high peak current that can be useful in many fields of science and medicine. Using this method, high proton energies have been achieved by increasing the laser power and by using ultrathin (≤ 200 nm) foils. However, this approach is limited by survivability of the nanotargets to laser prepulses and by difficulty in controlling the plasma acceleration properties. Here, we introduce a new target platform using two-photon polymerization, 3D laser-printed “clone” microstructures with average densities lower than solid that are relatively insensitive to the laser prepulse. Two types of microstructured targets consisting of either a multilayered log-pile or a stochastic arrangement of one micron diameter wires are used. Both demonstrate a higher energy and higher yield proton acceleration compared to thin solid-density foil targets by the robust target normal sheath acceleration (TNSA) mechanism. We find that when such 10–20 μm thick structures are irradiated with a petawatt laser, protons with energies up to 110 MeV and a laser-to-proton conversion efficiency of ~ 10% are obtained. Our work suggests that such microstructures optimized for 60–200 MeV compact proton accelerators are promising for future radiotherapy and other applications.

Physics - Plasma physics↗

Thermionic microwave gun for terahertz and synchrotron light sources

Conventional thermionic microwave and radiofrequency (RF) guns can offer high average beam current, which is important for synchrotron light and terahertz (THz) radiation source facilities, as well as for industrial applications. For example, the Advanced Photon Source at Argonne National Laboratory is a national synchrotron radiation light source research facility that utilizes thermionic RF guns. Yet, these existing thermionic guns are bulky, difficult to handle and install, easily detuned, very sensitive to thermal expansion, and are due for a major upgrade and replacement. Here, we present the design of a new, more stable and reliable gun with optimized electromagnetic performance, improved thermal engineering and a more robust cathode mounting technique, which is a critical step to improve the performance of existing and future light sources, industrial accelerators, and electron beam-driven terahertz sources. We will also present a fabricated gun prototype and show results of high-power and beam tests.

47 OTHER INSTRUMENTATION↗

High figure of merit spin polarized electron sources grown via MOCVD

Spin polarized photocathodes are key to the future operation of electron accelerators such as the ones at Thomas Jefferson National Accelerator Facility and Brookhaven National Laboratory. Currently, these photocathodes come in short supply due to limited production by molecular beam epitaxy. By developing a process to implement similar structures using metal organic chemical vapor deposition, the availability of these devices can be increased. Here, in this paper, we detail the implementation of recent photocathode advancements via metal organic chemical vapor deposition process and show an improvement in both polarization and quantum efficiency of our devices compared to those fabricated via molecular beam epitaxy, with devices reaching 82% polarization and 2.9% quantum efficiency.

43 PARTICLE ACCELERATORS↗

Machine learning-enabled computer vision for plant phenotyping: a primer on AI/ML and a case study on stomatal patterning

Abstract Artificial intelligence and machine learning (AI/ML) can be used to automatically analyze large image datasets. One valuable application of this approach is estimation of plant trait data contained within images. Here we review 39 papers that describe the development and/or application of such models for estimation of stomatal traits from epidermal micrographs. In doing so, we hope to provide plant biologists with a foundational understanding of AI/ML and summarize the current capabilities and limitations of published tools. While most models show human-level performance for stomatal density (SD) quantification at superhuman speed, they are often likely to be limited in how broadly they can be applied across phenotypic diversity associated with genetic, environmental, or developmental variation. Other models can make predictions across greater phenotypic diversity and/or additional stomatal/epidermal traits, but require significantly greater time investment to generate ground-truth data. We discuss the challenges and opportunities presented by AI/ML-enabled computer vision analysis, and make recommendations for future work to advance accelerated stomatal phenotyping.

Plant Sciences↗

Using a primordial gravitational wave background to illuminate new physics

A primordial spectrum of gravitational waves serves as a backlight to the relativistic degrees of freedom of the cosmological fluid. Any change in the particle physics content, due to a change of phase or freeze-out of a species, will leave a characteristic imprint on an otherwise featureless primordial spectrum of gravitational waves and indicate its early-Universe provenance. Here, we show that a gravitational wave detector such as the Laser Interferometer Space Antenna would be sensitive to physics near 100 TeV in the presence of a sufficiently strong primordial spectrum. Such a detection could complement searches at newly proposed 100 km circumference accelerators such as the Future Circular Collider at CERN and the Super Proton-Proton Collider in China, thereby providing insight into a host of beyond standard model issues, including the hierarchy problem, dark matter, and baryogenesis.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffusion model approach to simulating electron-proton scattering events

Generative artificial intelligence is a fast-growing area of research offering various avenues for exploration in high-energy nuclear physics. In this work, we explore the use of generative models for simulating electron-proton collisions relevant to experiments like the Continuous Electron Beam Accelerator Facility and the future Electron-Ion Collider (EIC). These experiments play a critical role in advancing our understanding of nucleons and nuclei in terms of quark and gluon degrees of freedom. The use of generative models for simulating collider events faces several challenges such as the sparsity of the data, the presence of global or eventwide constraints, and steeply falling particle distributions. In this work, we focus on the implementation of diffusion models for the simulation of electron-proton scattering events at EIC energies. Our results demonstrate that diffusion models can reproduce relevant observables such as momentum distributions and correlations of particles, momentum sum rules, and the leading electron kinematics, all of which are of particular interest in electron-proton collisions. Although the sampling process is relatively slow compared to other machine-learning architectures, we find diffusion models can generate high-quality samples. We foresee various applications of our work including inference for nuclear structure, interpretable generative machine learning, and searches of physics beyond the Standard Model. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pressure Distribution and Shear Forces inside the Proton

The distributions of pressure and shear forces inside the proton are investigated using lattice quantum chromodynamics (LQCD) calculations of the energy momentum tensor, allowing the first model-independent determination of these fundamental aspects of proton structure. This is achieved by combining recent LQCD results for the gluon contributions to the energy momentum tensor with earlier calculations of the quark contributions. The utility of LQCD calculations in exploring, and supplementing, the assumptions in a recent extraction of the pressure distribution in the proton from deeply virtual Compton scattering is also discussed. The target kinematics for experiments aiming to determine the pressure and shear distributions with greater precision at Thomas Jefferson National Accelerator Facility and a future electron ion collider are investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Progress and R/D challenges for FCC-ee SRF

The FCC-ee machines present a huge challenge for the RF systems, which need to be adapted to very diverse beam conditions going from moderate energy and high current for the Z machine to high energy and low beam current for the ttbar. This inverse scaling results naturally from a fixed budget for the synchrotron radiation, which the SRF cavities need to compensate. A global solution was elaborated for the FCC Conceptual Design Report (Abada in Eur Phys J Spec Top 228):261–623, 2019), and is referred here as the baseline. Recently, further studies have led to a new optimized baseline, still based on traditional elliptical cavities. In parallel, a novel concept, named the Slotted Waveguide ELLiptical (SWELL), was proposed with the potential of greatly simplified logistics and reduced costs. Under several aspects, all these changes call for enhanced performance of the RF systems. A vigorous R&D program has therefore continued since the publication of the CDR, with the aim of pushing the performance and demonstrating the feasibility of a more advanced baseline and, more recently, of the SWELL option. The progress and challenges of this ambitious program were presented in the dedicated SRF sessions at FCC week 2022 and are summarized in this paper.

47 OTHER INSTRUMENTATION↗

Space-Charge Compensation Using Electron Columns at IOTA

Beam loss due to space charge is a major problem at current and future high intensity particle accelerators. The space charge force can be compensated for proton or ion beams by creating a column of electrons with a charge distribution matched to that of the beam, maintaining electron-proton stability. The column is created by the beam ionizing short sections of high pressure gas. The ionization electrons are then shaped appropriately using electric and magnetic fields. The Integrable Optics Test Accelerator (IOTA) at Fermilab is a test bed for beam loss and instability mitigation techniques. Simulations using the particle-in-cell code, Warp, have been made to track the evolution of both the electron column and the beam over multiple passes. A 2.5 MeV proton beamline is under construction at IOTA, to be used to study the effect of the electron column on a space charge dominated beam.

43 PARTICLE ACCELERATORS↗

Simulations of the Electron Column in IOTA

Future high current proton accelerators will need to minimize beam loss due to space-charge in order to achieve safe operation while achieving the desired physics goals. One method of space-charge compensation to be tested at the Integrable Optics Test Accelerator (IOTA) at Fermilab is the Electron Column. The concept for this device is to allow a circulating beam to ionize a small region of relatively high pressure residual gas, while using electric and magnetic fields to confine and shape the resulting plasma electrons. If the profile of the electrons is matched to the beam profile transversely and longitudinally, the electrons should counteract the space-charge force of the proton beam. Simulations of the IOTA proton beam circulating through the Electron Column have been performed, with the evolution of the electron plasma and its effect on the beam studied.

43 PARTICLE ACCELERATORS↗

Modeling a Nb3Sn Cryounit in GPT at UITF

Nb₃Sn is a prospective material for future superconducting RF (SRF) accelerator cavities. The material can achieve higher quality factors, higher temperature operation and potentially higher accelerating gradients (E_{acc} 96 MV/m) compared to conventional niobium. In this work, we performed modeling of the Upgraded Injector Test Facility (UITF) at Jefferson Lab utilizing newly constructed Nb₃Sn cavities. We studied the effects of the buncher cavity and varied the gun voltages from 200-500 keV. We have calibrated and optimized the SRF cavity gradients and phases for the Nb₃Sn five-cell cavities energy gains with the framework of General Particle Tracer (GPT). Our calculations show the beam goes cleanly through the unit. There is full energy gain out of the second SRF cavity but not from the first SRF cavity due to non-relativistic phase shifts.

Pokharel, S.↗