Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency deviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Observing of Pre-earthquake Transients Features in Atmosphere-ionosphere Associated with January 2020 Caribbean Earthquakes

Several significant earthquakes occurred in the Caribbean during January 2020. The first earthquake with M = 6.4 occurred on January 7 off the southern coast of Puerto Rico. An earthquake of M7.7occurred in the Caribbean Sea on January 28, 2020, around 19:10 UT on the island of Jamaica. After3 hours (21:55), another M 6.1 earthquake (NEIC / USGS) occurred in the Caribbean. We analyzed, retrospectively, four different atmosphere/ionosphere physical parameters of during the time of these earthquakes namely: (i) the lower atmosphere chemical potential (ACP); (ii) outgoing earth radiation (OLR) at the TOA; (iii) GPS/TEC and; (iv) the very-low-frequency (VLF/LF) signals. We found that at the beginning of January 2020, a rapid increase in satellite measurements of the earth’s atmosphere radiation was recorded, an anomaly appeared over Puerto Rico on January 6 (1 day before the M6.4), and the maxim anomaly appeared eastward from January 20 (eight days before theM7.7). The increases in ACP on January 20-23 were measured near the epicentral area of the M7.7event and coincided with the OLR anomaly. For the VLF analysis, we used the amplitude data of the NAU signal (signal frequency 40.75 kHz), which was received at Chapman University in Orange, California. The length of the signal propagation path from the transmitter to the receiver was about 5300 km. A significant decrease in signal amplitude, exceeding the level of two standard deviations, was observed before the January 7 earthquake (M = 6.4) off the coast of Puerto Rico. A more significant anomaly in the VLF signal was observed before the M7.7 earthquake on January 28. The pre-earthquake nature of the signals in the atmosphere and ionosphere was revealed by simultaneous analysis of satellite, GPS/TEC, and VLF/LF observations. They suggest that they follow a general temporal-spatial evolution pattern, which has been previously observed globally.

D Ouzounov↗
NASA NTRS1973

Alfven wave refraction by interplanetary inhomogeneities.

Pioneer 6 magnetic data reveal that the propagation direction of Alfven waves in the interplanetary medium is strongly oriented along the ambient field. Magnetic fluctuations of frequencies up to 1/30 sec in the spacecraft frame are shown to satisfy a necessary condition for Alfven waves, and a variance matrix analysis is used to determine the Alfven wave normal. It appears from this analysis that geometrical hydromagnetics may satisfactorily describe deviation of the wave normal from the background field. The rotational discontinuity is likely also to propagate along the field lines.

Daily, W. D.↗
NASA NTRS1972

Spectral density measurements of gyro noise

Power spectral density (PSD) was used to analyze the outputs of several gyros in the frequency range from 0.01 to 200 Hz. Data were accumulated on eight inertial quality instruments. The results are described in terms of input angle noise (arcsec 2/Hz) and are presented on log-log plots of PSD. These data show that the standard deviation of measurement noise was 0.01 arcsec or less for some gyros in the passband from 1 Hz down 10 0.01 Hz and probably down to 0.001 Hz for at least one gyro. For the passband between 1 and 100 Hz, uncertainties in the 0.01 and 0.05 arcsec region were observed.

Truncale, A.↗
NASA NTRS1975

An Experimental Study of the Nonlinear Stiffness of a Rotor Blade Undergoing Flap, Lag and Twist Deformations

The large deformation of a cantilevered beam under a gravity tip load was studied. The beam root is rotated so that the tip load is oriented at various angles with respect to the beam principal axes. Static twist and bending deflections of the tip and bending natural frequencies were measured as a function of tip load magnitude and orientation. The experimental data are compared with the results of a recently developed nonlinear structural theory and agreement is good for deflections that are small compared to the beam span with systematic deviations for larger deflections. These results support the validity and utility of the nonlinear structural theory for rotor blade applications.

Dowell, E. H.↗
NASA NTRS1977

ATS-6 ascending - Near horizon measurements over water at 30 GHz

The return of the ATS-6 satellite to a western longitude during the fall of 1976 presented a unique opportunity to perform low-angle-of-elevation measurements at 30 GHz. For this purpose a receiver using a 1.5 m antenna was set up at Port Aransas, Texas, resulting in a propagation path entirely over water. The 30 GHz beacon was monitored daily for at least one hour from 8 September to 21 September 1976. During the time the elevation angle changed from 1.5 to 17.3 deg, the mean attenuation decreased from 20 to 2 dB and the standard deviation from over 6 dB to less than .2 dB. The deep fades at angles below 4 deg show significantly sharper nulls than peaks on a log scale. Spectra of the log amplitude fluctuations vary as the (-8/3) power of the spectral frequency in the limit. A flattening is noticeable at the low frequencies. A precipitation even at 8.5 deg elevation produced a 16 dB fade and significantly increased the variance.

Vogel, W. J.↗
NASA NTRS1977

ATS-6 ascending: Near horizon measurements over water at 30 GHz

The return of the ATS 6 satellite to a western longitude during the fall of 1976 presented a unique opportunity to perform low angle of elevation measurements at 30 GHz. For this purpose a receiver using a 1.5 m antenna was set up at Port Aransas, Texas, resulting in a propagation path entirely over water. The 30 GHz beacon was monitored daily for at least one hour from 8 September 1976 to 21 September 1976. During the time the elevation angle changed from 1.5 deg to 17.3 deg, the mean attenuation decreased from 20 dB to 2 dB and the standard deviation from over 6 dB to less than .2 dB. The deep fades at angles below 4 deg show significantly sharper nulls than peaks on a log scale. Spectra of the log amplitude fluctuations vary as the (-8/3) power of the spectral frequency in the limit. A flattening is noticeable at the low frequencies. A precipitation event at 8.5 deg elevation produced a 16 dB fade and significantly increased the variance.

Vogel, W. J.↗
NASA NTRS1994

Performance of mean-frequency estimators for Doppler radar and lidar

The performance of mean-frequency estimators for Doppler radar and lidar measurements of winds is presented in terms of two basic parameters: Phi, the ratio of the average signal energy per estimate to the spectral noise level; and Omega, which is proportional to the number of independent samples per estimate. For fixed Phi and Omega, the Cramer-Rao bound (CRB) (theoretical best performance) for unbiased estimators of mean frequency (normalized by the spectral width of the signal), signal power, and spectral width are essentially independent of the number of data samples M. For large Phi, the estimators of mean frequency are unbiased and the performance is independent of M. The spectral domain estimators and covariance based estimators are bounded by the approximate period of M. The spectral domain estimators and covariance based estimators are bounded by the approximate periodogram CRB. The standard deviation of the maximum-likelihood estimator approaches the exact CRB, which can be more than a factor of 2 better than the performance of the spectral domain estimators or covariance-based estimators for typical Omega. For small Phi, the estimators are biased due to the effects of the uncorrelated noise (white noise), which results in uniformly distributed 'bad' estimates. The fraction of bad estimates is a function of Phi and M with weak dependence on the parameter Omega. Simple empirical models describe the standard deviation of the good estimates and the fraction of bad estimates. For Doppler lidar and for large Phi, better performance is obtained by using many low-energy pulses instead of one pulse with the same total energy. For small Phi, the converse is true.

Frehlich, R. G.↗
NASA NTRS2012

Celestial Reference Frames at Multiple Radio Wavelengths

In 1997 the IAU adopted the International Celestial Reference Frame (ICRF) built from S/X VLBI data. In response to IAU resolutions encouraging the extension of the ICRF to additional frequency bands, VLBI frames have been made at 24, 32, and 43 gigahertz. Meanwhile, the 8.4 gigahertz work has been greatly improved with the 2009 release of the ICRF-2. This paper discusses the motivations for extending the ICRF to these higher radio bands. Results to date will be summarized including evidence that the high frequency frames are rapidly approaching the accuracy of the 8.4 gigahertz ICRF-2. We discuss current limiting errors and prospects for the future accuracy of radio reference frames. We note that comparison of multiple radio frames is characterizing the frequency dependent systematic noise floor from extended source morphology and core shift. Finally, given Gaia's potential for high accuracy optical astrometry, we have simulated the precision of a radio-optical frame tie to be approximately10-15 microarcseconds ((1-sigma) (1-standard deviation), per component).

quasars↗
NASA NTRS1982

Spectrum of the microwave background radiation

A review is given of the present status of measurements of the spectrum of the microwave background. Factors that limit experimental accuracy are discussed with particular reference to high-frequency measurements. A selection of the available measurements yields a data set that is reasonably consistent with the black-body spectrum for a temperature of 2.9 K. A simple statistical analysis suggests either that there are errors in the data set, or that deviations from a black-body spectrum exist. The difficulties inherent in properly averaging the results from different observers are described. Prospects for improved measurements are summarized.

Richards, P. L.↗
NASA NTRS1983

Yearly variations of rain-rate statistics at Wallops Island and their impact on modeled slant path attenuation distributions

Rain gauge measurements at Wallops Island, VA over a five-year period have been reduced and cumulative rain-date distributions have been determined for yearly, successively combined years, and overall average cases. Yearly variations of the predicted slant path attenuation statistics for two International Radio Consultative Committee (CCIR) models (referred to as modified method I and method II) and the global model at 28.56 GHz were calculated using the yearly measured rain rates at Wallops Island. This frequency was selected as it coincided with the beacon frequency of te COMSTAR geostationary satellite which was also simultaneously monitored at Wallops Island for a period of three years enabling a comparison with the measured rain-fade statistics. The year to year variations of the predicted fades as well as the percent deviations relative to the five-year average case were examined.

Goldhirsh, J.↗
NASA NTRS1989

Lower thermospheric density fluctuations during the time period of Typhoon Dinah

High frequency Doppler sounder arrays were used to study the thermospheric density fluctuations caused by Typhoon Dinah in August, 1987. The results show that the maximum density fluctuations caused by the typhoon at altitudes of 150 to 350 km were close to + or - 30 percent deviation from the quiet background. The time-dependent density fluctuations were in phase with the horizontal phase velocity of major gravity waves excited by the storm. It is suggested that the study demonstrates the use of HF Doppler sounder measurement of gravity waves, horizontal wind velocity in the direction of gravity wave propagation, and density perturbations at thermospheric heights.

Hung, R. J.↗
NASA NTRS1993

Unsteady loads measurements in a generic high speed engine model by means of recessed transducers

Results are presented from measurements of unsteady loads during performance tests of a generic high-speed engine model, which were made using high-frequency pressure gages installed in existing calorimeter ports of the engine model and recessed into the interior wall surface in order to reduce thermal flux to the gage diaphragm. In was found that the boundary layer pressure spectra at the model wall start to deviate from their flat plate counterpart at a short distance into the model inlet, which suggests the contributions to the spectra from the shock/boundary layer interaction. It was also found that significant levels of combustion noise propagate up through the subsonic portion of the boundary layer well into the inlet region. At the condition of an unstart, the combustion noise apparently couples with the acoustic modes of the model to cause acoustic 'hot spots' well upstream of the combustor.

Parrott, Tony L.↗
NASA NTRS2019

A Correction Method for Unsteady Transonic Aerodynamics

This paper presents a new method for transonic pitching airfoils based on a RANS CFD study and the Theodorsen model of an oscillating pitching flat plate. This study quantifies the deviation of the lift coefficient predictions using CFD from that obtained using the Theodorsen model, which is based on the incompressible potential flow assumption. The present method corrects this theoretical model by modulating the Theodorsen functions by coefficient functions that depend on the reduced frequency and the Mach number. It is demonstrated that the modified theoretical model predicts lift coefficient in good agreement with the CFD results in the Mach number range from incompressible (M =0.2) to transonic (M =0.755) flow for a range of reduced frequencies typical of transonic flutter. The simulations are first validated by comparing pitching NACA0012 airfoil results with experimental results at transonic flight conditions, which establishes the requirements for a grid converged unsteady transonic solution. The hysteresis loop, Cl versus α, attains a grid independent solution that compares well with experiment. The present correction method will guide the development of a new state space model for the Variable Camber Continuous Trailing Edge Flap (VCCTEF) system and eventually a new transfer function that will be incorporated in a new aeroelastic framework leading to an appropriate transonic flutter model for use in the future aircraft systems in development under the NASA Advanced Air Transportation Technologies (AATT) project.

Kaul, Upender K.↗
NASA NTRS1986

Intercomparison and calibration of wind and wave measurements at various frequencies

Radars are increasingly being used for determinations of the small-scale wave and turbulence fields of the atmosphere. It is important to understand as fully as possible the likely sources of error or bias in radar velocity determinations. This is especially true for the determination of wave and turbulence parameters which often rely on the measurement of first or second order deviations from the prevailing wind and therefore require better precision and time resolution than is usually required for measurements of the mean winds alone. The intercomparison of velocity measurements made with different techniques (e.g., radar and balloon) can be expected to help determine not only the relative effectiveness of the different methods, but also the degree of reliability.

Vincent, R. A.↗
NASA NTRS1979

Two-Way Time Transfer via Geostationary Satellites NRC/NBS, NRC/USNO and NBS/USNO via Hermes and NRC/LPTF (France) via Symphonie

In most of the experiments, 1 pps pulses of the station atomic clocks were exchanged between the partners, and a cubic equation was fitted to the 1000 to 2000 second measurements. The equations were exchanged and substracted to obtain the time difference of the stations. The standard deviation in the fit of the equations varied, depending on conditions, from 1.5 ns to 16 ns. For the last month of the Hermes experiment, a 1 MHz signal was used, giving a standard deviation of 0.18 ns. The comparison of the time scales via satellite and via Loran-C (BIH Circular D) show clearly that some Loran-C links are very good, but that the NBS link varies by 1 micron s. Via the satellite the frequencies of the time scales can be compared with an accuracy of 2 x 10 to the minus 14 power.

Costain, C.↗
NASA NTRS1992

Raman scattering measurements in flames using a tunable KrF excimer laser

A narrow-band tunable KrF excimer laser is used as a spontaneous vibrational Raman scattering source to demonstrate that single-pulse concentration and temperature measurements, with only minimal fluorescence interference, are possible for all major species (O2, N2, H2O, and H2) at all stoichiometries (fuel-lean to fuel rich) of H2-air flames. Photon-statistics-limited precisions in these instantaneous and spatially resolved single-pulse measurements are typically 5 percent, which are based on the relative standard deviations of single-pulse probability distributions. In addition to the single-pulse N2 Stokes/anti-Stokes ratio temperature measurement technique, a time-averaged temperature measurement technique is presented that matches the N2 Stokes Raman spectrum to theoretical spectra by using a single intermediate state frequency to account for near-resonance enhancement. Raman flame spectra in CH4-air flames are presented that have good signal-to-noise characteristics and show promise for single-pulse UV Raman measurements in hydrocarbon flames.

Wehrmeyer, Joseph A.↗
NASA NTRS2011

Testing the Standard Model with the Primordial Inflation Explorer

The Primordial Inflation Explorer is an Explorer-class mission to measure the gravity-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background. PIXIE uses an innovative optical design to achieve background-limited sensitivity in 400 spectral channels spanning 2.5 decades in frequency from 30 GHz to 6 THz (1 cm to 50 micron wavelength). The principal science goal is the detection and characterization of linear polarization from an inflationary epoch in the early universe, with tensor-to-scalar ratio r < 10A{-3) at 5 standard deviations. The rich PIXIE data set will also constrain physical processes ranging from Big Bang cosmology to the nature of the first stars to physical conditions within the interstellar medium of the Galaxy. I describe the PIXIE instrument and mission architecture needed to detect the inflationary signature using only 4 semiconductor bolometers.

Kogut, Alan J.↗
NASA NTRS2021

Assessing CryoSat-2 Antarctic Snow Freeboard Retrievals Using Data From ICESat-2

NASA's Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) laser altimeter launched in Fall 2018, providing an invaluable addition to the polar altimetry record generated by ESA's CryoSat-2 radar altimeter. The simultaneous operation of these two satellite altimeters enables unique comparison studies of sea ice altimetry, utilizing the different frequencies and profiling strategies of the two instruments. Here, we use freeboard data from ICESat-2 to assess Antarctic snow freeboard retrievals from CryoSat-2. We first discuss updates made to a previously published CryoSat-2 retrieval process and show how this Version 2 algorithm improves upon the original method by comparing the new retrievals to ICESat-2 in specific along-track profiles as well as on the basin-scale. In two near-coincident along-track profiles, we find mean snow freeboard differences (standard deviations of differences) of 0.3 (9.3) and 7.6 cm (9.6 cm) with 25 km binned correlation coefficients of 0.77 and 0.89. Monthly mean freeboard differences range between −2.9 (10.8) and 6.6 cm (16.8 cm) basin wide, with the largest differences typically occurring in Austral fall months that is hypothesized to be related to new ice growth and the use of static snow backscatter coefficients in the retrieval. Monthly mean correlation coefficients range between 0.57 and 0.80. While coincident data show good agreement between the two sensors, they highlight issues related to geometric and frequency sampling differences that can impact the freeboard distributions.

S W Fons↗