Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Symmetry degeneration and room temperature ferroelectricity in ion-irradiated SrTiO 3

Polar phonon modes associated with room temperature ferroelectricity are observed in SrTiO 3 single crystals irradiated with Ti ions. Quantitative strain analysis reveals that irradiation-induced out-of-plane strain drives the centrosymmetric cubic SrTiO 3 to a tetragonal-like structure in the maximum damaged region. Energy transfer from ions to electrons during ion irradiation yields defects in SrTiO 3 that also plays an important role for the room temperature ferroelectricity. Different from thin film techniques, the ferroelectricity in the ion irradiated SrTiO 3 can occur for much larger thicknesses, depending on the energy and type of ion.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Paramagnon heat capacity in (Ti,Zr,Hf)NiFe x NiSn half-Heusler composites

As a measure of the temperature response of the energy of matter, the heat capacity $C_p$ is a fundamental thermodynamic property. Its dependence on magnetic field, especially at low temperatures, yields insight into the electronic, phononic, and magnetic states of condensed matter. Here, we present a set of paramagnetic and ferromagnetic (Ti, Zr, Hf)NiFe x Sn half-Heusler composites that exhibit low-field (<3 T) maxima in $C_p$ and higher-field magnetic quenching of the heat capacity at temperatures below 10 K. Using rigorous statistical analysis, we attribute the effect to the existence of paramagnons within the compounds. To explain the lowest-temperature (<4 K), low-field declines in $C_p$, we derive a magnon model up to fourth order in dispersion. While the combined paramagnon and magnon model matches the data well, the fit parameters are significantly underdetermined. Further, we provide a qualitative explanation of the secondary effect based on superconducting phases within the composites. Overall, our work highlights the insight of field-dependent heat capacity studies at fixed temperatures that cannot be as easily gleaned from the temperature-dependent heat capacity at fixed magnetic fields.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Thermospheric temperature measurement technique.

A method for measurement of temperature in the earth's lower thermosphere from a high-velocity probes is described. An undisturbed atmospheric sample is admitted to the instrument by means of a free molecular flow inlet system of skimmers which avoids surface collisions of the molecules prior to detection. Measurement of the time-of-flight distribution of an initially well-localized group of nitrogen metastable molecular states produced in an open, crossed electron-molecular beam source, yields information on the atmospheric temperature. It is shown that for high vehicle velocities, the time-of-flight distribution of the metastable flux is a sensitive indicator of atmospheric temperature. The temperature measurement precision should be greater than 94% at the 99% confidence level over the range of altitudes from 120-170 km. These precision and altitude range estimates are based on the statistical consideration of the counting rates achieved with a multichannel analyzer using realistic values for system parameters.

Hueser, J. E.↗
NASA NTRS1976

Nonlinear dynamic theory for photorefractive phase hologram formation

A nonlinear dynamic theory is developed for the formation of photorefractive volume phase holograms. A feedback mechanism existing between the photogenerated field and free-electron density, treated explicitly, yields the growth and saturation of the space-charge field in a time scale characterized by the coupling strength between them. The expression for the field reduces in the short-time limit to previous theories and approaches in the long-time limit the internal or photovoltaic field. Additionally, the phase of the space charge field is shown to be time-dependent.

Kim, D. M.↗
NASA NTRS1976

Limb-brightening observations from the OSO-7 satellite. II - Comparison of Abel-inverted intensities of Fe XIV and Fe XIII EUV emission lines with predictions

Intensities of Fe XIV and Fe XIII EUV emission lines obtained at coronal locations beyond the limb by the Goddard spectroheliograph on the OSO 7 satellite have been corrected for the wavelength dependence of the instrument's sensitivity and have been Abel-inverted to provide a valid comparison with theoretical predictions for each ion. Details of the Abel-inversion procedure are given, including explicit formulas for application of Bracewell's (1956) method. The intensity ratios of pairs of lines originating from a common level are compared with expected theoretical transition probability ratios over a range of heliocentric distance; deviations in some cases yield information about adjacent unclassified lines. Comparison of the observations with predictions for Fe XIV and Fe XIII shows generally good agreement, with a few interesting discrepancies that may imply a corresponding need for more accurate collisional excitation cross sections. The same comparison yields the variation of electron density with heliocentric radius for each ion separately; the two density functions are found to agree within a factor of three.

Kastner, S. O.↗
NASA NTRS1982

Introduction to the concepts of TELEDEMO and TELEDIMS

An introduction to the system concepts: TELEDEMO and TELEDIMS is provided. TELEDEMO is derived primarily from computer graphics and, via incorporation of sophisticated image data compression, enables effective low cost teleconferencing at data rates as low as 1K bit/second using dial-up phone lines. Combining TELEDEMO's powerful capabilities for the development of presentation material with microprocessor-based Information Management Systems (IMS) yields a truly all electronic IMS called TELEDIMS.

Rice, R. F.↗
NASA NTRS1983

The solar wind ionization state as a coronal temperature diagnostic

The 'frozen' solar wind ionization state within a few solar radii of the photosphere suggests that ion measurements at 1 AU may yield information on the electron temperature conditions at the base of the coronal expansion. The freezing-in process is examined in light of traditional assumptions as to coronal expansion, where electron temperature decreases monotonically with height, the bulk flow of all charge states of a given ion species are equal to the proton speed, and the ion outflow is spherically symmetric. The consequences of the relaxation of these assumptions include the underestimation of the magnitude of a temperature maximum occurring near the freezing-in radius. Because it is associated with high speed, low density flow, an areal divergence that is faster than that in a spherical outflow lowers the ionization state freezing-in level relative to that which is typical in spherically symmetric expansion.

Owocki, S. P.↗
NASA NTRS1986

Plasma wave observations at comet Giacobini-Zinner

The plasma wave instrument on the International Cometary Explorer (ICE) detected strong ion acoustic waves together with electromagnetic whistlers and low-level electron plasma oscillations when the spacecraft was within two million km of the nucleus of comet Giacobini-Zinner. As ICE approached the anticipated bow-shock location, electromagnetic and electrostatic wave levels increased significantly, but even amidst this turbulence, the wave instrument detected structures with familiar bow shock characteristics that were correlated with observations of localized electron heating phenomena. Just beyond the visible coma, high-amplitude broadband waves were detected accounting for the significant electron heating observed in this region. Near closest approach, broadband electrostatic noise was detected together with a changing pattern of weak electron plasma oscillations that yielded a density profile for the outer layers of the cold plasma tail. Near the tail axis, the plasma wave instrument also detected a nonuniform flux of dust impacts, and a preliminary profile of the Giacobini-Zinner dust distribution for micrometer-sized particles is presented.

Scarf, F. L.↗
NASA NTRS1986

Comet Halley neutral gas density profile along the Vega 1 trajectory measured by NGE

Data from the Vega 1 permitted the determination of the total neutral gas density profile along the spacecraft trajectory. Discounting small fluctuations, the field ionization source instrument measured a density profile which varied approximately as the inverse radial distance squared. Data from the electron impact ionization instrument yielded a series of calibration points; e.g., the neutral density at 100,000 km is 10,000/cc. The combined data provide a calibrated total density profile, and imply a neutral production rate of 10 to the 30th power molecules/sec.

Curtis, C. C.↗
NASA NTRS1986

A comparison of the bonding in Cr(NO)4 and Ni(CO)4

The bonding in Cr(NO)4 is very ionic, with about 1.5 electrons donated from the Cr to the NO 2pi orbitals. There is also a NO sigma donation of about 0.5 electrons to the Cr, yielding a net charge of Cr of about 1. A large MCSCF expansion is needed to describe both the ionic and covalent contributions to the Cr 3d-NO 2pi bonding. This bonding is compared to that in the isoelectronic Ni(CO)4.

Bauschlicher, C. W., Jr.↗
NASA NTRS1988

Multilevel calculation of the Ne IV solar spectrum

A calculation of the atomic parameters of the seven-electron ion Ne IV yields radiative rates A(ki) and distorted-wave collision strengths Omega (ki) between 72 levels of the six configurations 2s2 2p3, 2s2p4, 2p5, 2p2 3s, 2p2 3p, and 2p2 3d. These are used to obtain expected line intensities for quiet, active, and flare solar conditions. Comparisons are made with available solar observations. Good agreement is found, including observed density-sensitivity in the case of the multiplet at 469.8 A. The atomic radiative rates are separately compared with laboratory beam-foil measurements and are shown to be in reasonable agreement with the latter.

Bhatia, A. K.↗
NASA NTRS1990

The interaction of an artificial electron beam with the earth's upper atmosphere - Effects on spacecraft charging and the near-plasma evironment

The ionization created in the earth's upper atmosphere by an electron beam emitted from a low altitude spacecraft is described by two coupled nonlinear differential electron transport equations for the up-going and down-going differential energy flux. The equations are solved numerically, yielding estimates of the differential electron energy flux density at the spacecraft location. At altitudes below 200-250 km and for beam energies around 1 keV, it is shown that secondary electrons supply a significant contribution to the return current to the spacecraft and thereby reduce the spacecraft potential. The numerical results are in good agreement with observations from the Charge 2 sounding rocket experiment.

Neubert, T.↗
NASA NTRS1990

On the 'fast electron hypothesis' for stellar flares

It is pointed out that Gurzadyan's (1988) fast-electron hypothesis for stellar flares encounters certain difficulties. The origin of the fast electrons is obscure. Negative flares and predicted ratios of X-ray to optical fluxes are not necessarily a proof of the fast-electron hypothesis. When the electrons thermalize, they will yield X-ray fluxes which are orders of magnitude too large to be consistent with observations.

Mullan, D. J.↗
NASA NTRS1993

C/O atomic ratios in micrometer-size crushed grains from Antarctic micrometeorites and two carbonaceous meteorites

Antarctic micrometeorites (AMM's) have similarities (but also differences) with primitive meteorites, such as unequilibrated mineral assemblages. To further assess such similarities, we have measured the carbon content of micrometeorites and meteorites (Orgueil and Murchison), as determined in a random selection of micrometer-size crushed grain, with an analytical transmission electron microscope. Such analyses yield the C/O atomic ratio, the major and minor elements contents, and the textural features of the grains on a scale of approx. equal to 100 nanometers. An important proportion of micrometeorites from both the 100-400 micron and the 50-100 micron size fractions contains much more carbon than CI chondrite Orgueil. The average C-content of all micrometeorites in these two size fractions amount to approximately 1.8 x CI, and approximately 0.8 x CI, respectively (CI refers to the bulk C-content of Orgueil, of about 3.5 percent by weight). Carbon is usually not homogeneously distributed in the micrometeorite but is concentrated in C-rich grains. So far, most of these grains are amorphous, and seem to be associated with an oxidized Fe-rich phase (possibly a variety of 'dirty' magnetite). About 5 percent of them have the composition of 'COPS', a phase additionally enriched in O, P, and S.

Perreau, M.↗
NASA NTRS1994

(Fe II) 1.53 and 1.64 micron emission from pre-main-sequence stars

We present flux-calibrated profiles of the (Fe II) 1.53 and 1.64 micron lines in five pre-main-sequence stars, PV Cep, V1331 Cyg, R Mon, and DG and HL Tau. The line centroids are blueshifted in all five sources, and four of the five have only blueshifted flux. In agreement with previous studies, we attribute the line asymmetries to local obscuration by dusty circumstellar disks. The absence of redshifted flux implies a minimum column density of obscuring material. The largest limit, N(sub H) greater than 3 x 10(exp 22)/sq cm, derived for V1331 Cyg, suggests disk surface densities greater than 0.05 g/sq cm and disk masses greater than 0.001 solar mass within a radius of approximately 200 AU. The narrow high-velocity lines in PV Cep, V1331 Cyg, and HL Tau require formation in well collimated winds. The maximum full opening angles of their winds range from less than 20 deg in V1331 Cyg to less than 40 deg in HL Tau. The (Fe II) data also yield estimates of the electron densities (n(sub e) approximately 10(exp 4)/cu cm), hydrogen ionization fractions (f(sub H(+)) approximately 1/3), mass-loss rates (approximately 10(exp -7) to 2 x 10(exp -6) solar mass/yr), and characteristic radii of the emitting regions (approximately 32 to approximately 155 AU). The true radial extents will be larger, and the mass-loss rates smaller, by factors of a few for the outflows with limited opening angles. In our small sample the higher mass stars have stronger lines, larger emitting regions, and greater mass-loss rates. These differences are probably limited to the scale and energetics of the envelopes, because the inferred geometries, kinematics and physical conditions are similar. The measured (Fe II) profiles samples both 'high'- and 'low'-velocity environments. Recent studies indicate that these regions have some distinct physical properties and may be spatially separate. The (Fe II) data show that similar sizes and densities can occur in both environments.

Hamann, Fred↗
NASA NTRS1996

Three-Dimensional Electromagnetic Monte Carlo Particle-in-Cell Simulations of Critical Ionization Velocity Experiments in Space

Although the existence of the critical ionization velocity (CIV) is known from laboratory experiments, no agreement has been reached as to whether CIV exists in the natural space environment. In this paper we move towards more realistic models of CIV and present the first fully three-dimensional, electromagnetic particle-in-cell Monte-Carlo collision (PIC-MCC) simulations of typical space-based CIV experiments. In our model, the released neutral gas is taken to be a spherical cloud traveling across a magnetized ambient plasma. Simulations are performed for neutral clouds with various sizes and densities. The effects of the cloud parameters on ionization yield, wave energy growth, electron heating, momentum coupling, and the three-dimensional structure of the newly ionized plasma are discussed. The simulations suggest that the quantitative characteristics of momentum transfers among the ion beam, neutral cloud, and plasma waves is the key indicator of whether CIV can occur in space. The missing factors in space-based CIV experiments may be the conditions necessary for a continuous enhancement of the beam ion momentum. For a typical shaped charge release experiment, favorable CIV conditions may exist only in a very narrow, intermediate spatial region some distance from the release point due to the effects of the cloud density and size. When CIV does occur, the newly ionized plasma from the cloud forms a very complex structure due to the combined forces from the geomagnetic field, the motion induced emf, and the polarization. Hence the detection of CIV also critically depends on the sensor location.

Wang, J.↗
NASA NTRSDate not supplied

Additional Trials & Tribulations in Synthesizing a Sulfide Standard

Well-characterized sulfide reference materials that can serve as matrix-matched calibrants for in-situ trace element analyses via laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) remain elusive. Here, we describe the creation an in-house sulfide standard at NASA JSC that will be used to measure siderophile and chalcophile trace elements in low pressure experimental products, specifically pentlandite ([FeNi]9S8) and pyrrhotite ([FeNi]1-xS), as well as natural sulfides in terrestrial and meteoritic mineral assemblages. Recent methods in creating a homogenous sulfide standard include pressed pellets, synthesized chips, or fused glass [e.g. 1-3]. Other studies, however, have had success in forming homogenous FeS standards via synthesization methods [e.g. 4-6]. We present a variation of the method described in [4], in which we create a pyrrhotite standard doped with a variety of trace elements (Zn, As, Se, Mo, Ru, Rh, Pd, Sn, Sb, Te, W, Os, Ir, Pt, Au) at ~10-40 ppm and Cu at ~200 ppm. Sulfide compositions were constructed using Fe and Ni metal and elemental sulfur powders. Trace elements were added to elemental sulfur from Atomic Absorption Spectroscopy (AAS) elemental standards as either nitrate or chloride solutions to prevent oxidation of the metal powders. The dried sulfur mixture was mixed with Fe and Ni powders and mechanically mixed before two aliquots were placed in separate SiO2 tubes. Each tube was held under vacuum for ~30 minutes, sealed under vacuum, and then heated at 800C for 48 hours. Like [4], the synthesis products were composed of pourous sulfide crystals. Major element analyses of both experimental aliquots, collected using an Electron Probe Microanalyser (EPMA), yield indistinguishable major element compositions (uncertainties in 2SE & 2RSE[%]), with an average of 57.90  0.09 (0.16 %), 4.95  0.03 (0.55 %), and 39.70  0.14 (0.34 %), for Fe, Ni, and S, respectively. Trace element data were measured using a Photon Machines 193nm laser ablation system coupled to a Thermo-Scientific Element-XR ICP-MS. Spot sizes were limited to 50 μm due to the porous nature of the sulfide target material. Trace element abundances, normalized to Fe as an internal standard, were also found to be homogenous between the two aliquots, with weighted mean 2RSE (%) values of <3.0 for all trace elements. Synthesized products were re-powdered and absolute concentrations measured via solution ICP-MS. Although the sulfide appears to be homogenous, sintering experiments will be performed to more closely match the standard density to natural sulfides and minimize differences in ablation behavior. Improved density also allows for higher sensitivity (i.e. more compact target material) and larger spot sizes or traverses, as void space is eliminated. Additional major and trace element analyses on the products of the sintering experiments will be undertaken.

Jacob B Setera↗
DOE OSTI2021

Skin-like low-noise elastomeric organic photodiodes

Stretchable optoelectronics made of elastomeric semiconductors could enable the integration of intelligent systems with soft materials, such as those of the biological world. Organic semiconductors and photodiodes have been engineered to be elastomeric; however, for photodetector applications, it remains a challenge to identify an elastomeric bulk heterojunction (e-BHJ) photoactive layer that combines a low Young’s modulus and a high strain at break that yields organic photodiodes with low electronic noise values and high photodetector performance. Here, a blend of an elastomer, a donor-like polymer, and an acceptor-like molecule yields a skin-like e-BHJ with a Young’s modulus of a few megapascals, comparable to values of human tissues, and a high strain at break of 189%. Elastomeric organic photodiodes based on e-BHJ photoactive layers maintain low electronic noise current values in the tens of femtoamperes range and noise equivalent power values in the tens of picowatts range under at least 60% strain.

42 ENGINEERING↗