Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Microstructural, optical and electrical properties of CdS thin films grown by spray pyrolysis technique as a function of substrate temperature

In this research, nanocrystalline cadmium sulfide thin films were produced by the spray pyrolysis technique on glass substrates. The effects of substrate temperature in the range 400–550 °C on the structural, morphological, optical, and electrical properties of the thin films were investigated. The thin films have been characterized by investigating their X-ray diffraction, field emission scanning electron microscope (FE-SEM), and optical absorption (UV–Vis) measurements. X-ray analysis revealed that thin films were a polycrystalline structure with the hexagonal phase in all cases and by increasing in substrate temperature, crystallite size decreases, and dislocation density increases. The FE-SEM images showed that the surface of the thin films is uniform, homogeneous and without cracks. The average sizes of the grains are at the range of 210–235 nm. The obtained values for optical band gap have been in the range of 2.18–2.41 eV, where the value of optical band gap for the thin films decreases by increasing substrate temperature. The Urbach energies of the thin films increase as the substrate temperature is increased. When substrate temperature increased from 400 to 550 °C, electrical resistivity increased from 531 to 2817 Ω cm, carrier concentration decreased from 15.96 × 10{sup 14} to 3.71 × 10{sup 14} cm{sup −3}, Hall mobility decreased from 7.37 to 5.98 cm{sup 2}/V s. Hall effect analysis indicated that the thin films exhibited n-type conductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrical properties of scandium nitride epitaxial films grown on (100) magnesium oxide substrates by molecular beam epitaxy

Scandium nitride (ScN) films were grown on (100) MgO single crystals by a molecular beam epitaxy method. The effects of growth conditions, including [Sc]/[N] ratio, growth temperature, and nitrogen radical state, on the electrical properties of the ScN films were studied. The ScN films comprised many small columnar grains. Hall coefficient measurements confirmed that the ScN films were highly degenerate n-type semiconductors and that the carrier concentration of the ScN films was sensitive to the growth temperature and the nitrogen radical states during the film growth. The carrier concentrations of the ScN films ranged from 10{sup 19}–10{sup 21} cm{sup −3} while the Hall mobilities ranged from 50–130 cm{sup 2}·V{sup −1}·s{sup −1} for undoped films. The temperature-dependent Hall coefficient measurements showed that the carrier concentration is nearly independent of temperature, indicating that the change in resistivity with temperature is explained by a change in the Hall mobility. The temperature-dependence of the Hall mobility was strongly affected by the growth conditions.

36 MATERIALS SCIENCE↗

Anisotropic electrical properties of NiO x /β-Ga 2 O 3 p-n heterojunctions on (2̅01), (001), and (010) crystal orientations

Abstract NiO x / β -Ga 2 O 3 p-n heterojunctions fabricated on ( 2 ̅ 01 ) , ( 001 ) , and ( 010 ) β -Ga 2 O 3 substrates show distinctly anisotropic electrical properties. All three devices exhibited excellent rectification ≥10 9 , and turn-on voltages >2.0 V. The ( 010 ) device showed very different turn-on voltage, specific on-resistance, and reverse recovery time compared with ( 2 ̅ 01 ) and ( 001 ) devices. Moreover, it is calculated that the interface trap state densities for ( 2 ̅ 01 ) , ( 001 ) , and ( 010 ) plane devices are 4.3 × 10 10 , 7.4 × 10 10 , and 1.6 × 10 11 eV –1 cm –2 , respectively. These differences in the NiO x / β -Ga 2 O 3 heterojunctions are attributed to the different atomic configurations, the density of dangling bonds, and interface trap state densities.

Physics↗

Optical and electrical properties of ion beam textured Kapton and Teflon

An electron bombardment argon ion source was used to ion etch polyimide (Kapton) and fluorinated ethylene, FEP (Teflon). Samples of polyimide and FEP were exposed to (0.5-1.0) keV Ar ions at ion current densities of (1.0-1/8) mA/sq cm for various exposure times. Changes in the optical and electrical properties of the samples were used to characterize the exposure. Spectral reflectance and transmittance measurements were made between 0.33 and 2.16 micron m using an integrating sphere after each exposure. From these measurements, values of solar absorptance were obtained. Total emittance measurements were also recorded for some samples. Surface resistivity was used to determine changes in the electrical conductivity of the etched samples. A scanning electron microscope recorded surface structure after exposure. Spectral optical data, resistivity measurements, calculated absorptance and emittance measurements are presented along with photomicrographs of the surface structure for the various exposures to Ar ions.

Mirtich, M. J.↗

Effect of postdeposition annealing on the interfacial and electrical properties of high-k NdO{sub x}N{sub y} gate dielectrics

The authors proposed a high-k NdO{sub x}N{sub y} gate dielectric grown on silicon substrate by reactive rf sputtering. It is found that the NdO{sub x}N{sub y} gate dielectric after annealing at 700 deg. C exhibits excellent electrical properties such as high capacitance value, small interface state, low leakage current, and almost no hysteresis in the capacitance-voltage curves. This indicates that annealing at 700 deg. C treatment can suppress the interfacial layer and silicate formation, reduce interface traps, and anneal out defects.

36 MATERIALS SCIENCE↗

Effect of the both texture and electrical properties of activated carbon on the CO{sub 2} adsorption capacity

Highlights: • A series of activated carbon pellet without binder was prepared by chemical activation. • Carbon dioxide storage isotherm at 30 °C and up to 25 bars was measured for the microporous carbon. • Adsorption enthalpies have been correlated with the carbon dioxide uptake. • Pyrolysis temperature effect on the electrical conductivity of the samples. • Impact of the both texture and electrical properties on CO{sub 2} adsorption capacity have been deducted - Abstract: A series of activated carbon pellets (ACP) based on olive stones were studied for CO{sub 2} storage application. The surface area, pore volume, and pore diameter were evaluated from the analysis of N{sub 2} adsorption isotherm data. The characterization of carbon materials was performed by scanning electron microscopy (SEM), the powder X-ray diffraction (PXRD) and transmission electron microscopy (TEM). The adsorption enthalpies were obtained by microcalorimetry. The effect of pyrolysis temperature on textural, electrical conductivity and gas adsorption capacities of the ACP were investigated by adsorbing CO{sub 2} at 303 K in the pressure range of 0–2.3 MPa. In fact the electrical conductivity is strongly affected by the microporosity of the samples and the size of the micropore. It increases when the pore size decreases which affect the CO{sub 2} adsorption. Also with increases temperature the free electrons concentration on the surface increases which affect the interaction of the adsorbed gas molecules.

36 MATERIALS SCIENCE↗

Effect of precursor concentration on the electrical properties of LiFePO{sub 4} prepared by solvothermal method

Lithium iron phosphate (LiFePO{sub 4}) is frequently used for Li-ion battery cathode. LiFePO{sub 4} has the high specific capacity at 170 mAhg{sup −1}, stable voltage at 3.45 V, stable structure, cheap, and low toxicity. The objective of this research is investigating the effect of precursor concentration on the electrical properties of LiFePO{sub 4} prepared by solvothermal method. LiOH, FeSO{sub 4}, H{sub 3}PO{sub 4}, and citric acid were used as the precursors. The LiOH concentration was varied from 0.3 M to 1.8 M. The Fourier Transform Infrared Spectroscopy (FTIR) measurement identified the Fe-O, O-P-O, and P-O bonds which corresponding to LiFePO{sub 4}. The result of 4-point probe measurement shows that, among the prepared samples, the sample from the precursor concentration of 1.8 M has the highest electrical conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphotropic phase boundary and electrical properties of K{sub 1-x}Na{sub x}NbO{sub 3} lead-free ceramics

Lead-free K{sub 1-x}Na{sub x}NbO{sub 3} ceramics with x=0.48-0.54 were prepared by a conventional solid-state reaction method to investigate the influence of the K/Na ratio on phase structures and electrical properties. The results suggest that a typical morphotropic phase boundary exists at x=0.52-0.525, separating the monoclinic and orthorhombic phases. The sample with the composition near x=0.52 shows the maximum values of the piezoelectric constant (d{sub 33}=160 pC/N) and the electromechanical coupling coefficient (k{sub t}=47%). The results provide a helpful guidance to consider the optimal ratio of K to Na for designing and developing new (K,Na)NbO{sub 3}-based ceramics.

36 MATERIALS SCIENCE↗

Optical and high frequency electrical properties of the lunar sample

Reflectivity and polarization laws for the powder sample and its spectrum are close to the mean for the lunar maria. Solid samples show a marked absorption feature at 1 micron. The low albedo appears to be due to a surface coating on dust grains rather than volume absorption. The high frequency electrical properties resemble those of a fine powder made from typical dense terrestrial rocks, and are consistent with previous ground-based radar estimates. The differential mass spectrum is almost constant from 100 micron particles down to 0.1 micron; most particles are smaller than 0.3 micron. Their shapes disclose a variety of generation processes.

Gold, T.↗

Optical and electrical properties of undoped and boron doped zinc oxide synthesized by chemical route

We have synthesized and studied the boron doped ZnO nanostructure thin films. The crystallinity of undoped and boron (B) doped ZnO (BZO) has been studied from XRD results. Using the Debye-Scherrer Formula, the grain size has been evaluated, which was found to decrease with increased doping concentration. The optical and electrical properties of (1, 3, 5 wt%) B-doped ZnO (BZO) has been investigated with reference to the undoped counterpart. The UV-VIS spectroscopic analysis revealed that the transmittance for undoped ZnO is maximum and it decreases with doping up to 3% but increases for 5% BZO. The dark as well as photo current–voltage (I–V) characteristics have been investigated in details and the changes occurred in the I-V characteristics with doping concentration as well as under illumination are also quite significant.

36 MATERIALS SCIENCE↗

Effect of annealing temperature on structure and electrical properties of topological insulator Bi{sub 2}Te{sub 3}

Bi{sub 2}Te{sub 3} samples were prepared by precipitation method. The samples were annealed in evacuated quartz tubes and were treated at different temperature for different duration of time. Effects of annealing temperature and time on the structure of Bi{sub 2}Te{sub 3} were studied in detail. The Bi{sub 2}Te{sub 3} samples annealed at temperature 300°C and 450°C for 48Hrs, 72Hrs and 96Hrs were selected for the present study. The structure of Bi{sub 2}Te{sub 3} and related phases were investigated by the X-ray powder diffraction technique. Morphology and chemical compositions of the samples were investigated by scanning electron microscope and energy dispersive X-ray spectroscopy respectively. All the samples were indexed in rhombohedral crystal structure, with a space group R-3m. The structure consists of repeated quintuple layers of atoms, Te2-Bi-Te1-Bi-Te2 stacking along the z-axis of the unit cell. Electrical properties of the sample annealed at 300°C for 96Hrs was evaluated by measurements of the electrical resistivity and magnetoresistance. The magnetoresistance data at low temperature (1.5 to 50 K) were analyzed to investigate weak antilocalization (WAL) effect. MR data followed the Hikami–Larkin–Nagaoka (HLN) equation with a fit parameter α close to −1 as expected for topological surface states at 1.5 K, but for other temperatures the small oscillations were observed which may be due to the phenomena like Shubnikov-de Hass effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modified Magnetic and Electrical Properties of Perovskite-Spinel Multiferroic Composites

Multiferroic composite samples (1 − x) Bi{sub 0.9}Pr{sub 0.1}FeO{sub 3}–xNi{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} for x = 0, 0.1, 0.2, 0.3, and 1.0 were synthesized by sol-gel auto-combustion method. Detailed investigations were made on the structural, magnetic, and electrical properties of these composites. The X-ray diffraction (XRD) patterns confirm the co-existence of perovskite BPFO and spinel ferrite NCFO without any impurity phase. The average particle size of BPFO and NCFO nanoparticles is nearly equal to 110 nm and 35 nm respectively which are confirmed by XRD and transmission electron microscopy (TEM) analysis. Structural and surface morphology are studied by scanning electron microscopy (SEM). The dielectric properties of the composites are also studied at room temperature. The saturation and remnant magnetization are found to increase with increase in NCFO weight percentage in the composites. The saturation magnetization (Ms) values are 3.38 emu/g, 8.65 emu/g, and 13.87 emu/g and coercivity (Hc) values are 936.52 Oe, 1058.12 Oe, and 1046.77 Oe for BPFO-NCFO 1, 2, and 3 composite samples respectively. The incorporation of BPFO and NCFO enhances the multiferroic properties in the present composite materials which are quite promising for applications point of view.

36 MATERIALS SCIENCE↗

Effect of cobalt impurity ions on the magnetic and electrical properties of iron monosilicide crystals

The results of experimental investigations of Fe{sub 1-x}Co{sub x}Si crystals in the impurity limit with x = 0.001, 0.005, and 0.01 are reported. The temperature and field dependences of the magnetic susceptibility have been studied. According to the experimental data, the introduction of cobalt impurity leads to a change in the energy structure, which is most pronounced in a change in the electrical properties. The temperature, field, and concentration dependences of the resistivity have been measured. The results have been interpreted in the framework of the Kondo model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, characterization and electrical properties of a lead sodium vanadate apatite

The lacunary lead sodium vanadate apatite Pb{sub 8}Na{sub 2}(VO{sub 4}){sub 6} was synthesized by the solid-state reaction method. The compound was characterized by X-ray powder diffraction, infrared (IR) absorption spectroscopy and Raman scattering spectroscopy. By comparing the effect of vanadate and phosphate ions on electrical properties, it was concluded that Pb{sub 8}Na{sub 2}(VO{sub 4}){sub 6} apatite is better conductor than Pb{sub 8}Na{sub 2}(PO{sub 4}){sub 6} apatite.

36 MATERIALS SCIENCE↗

Enhanced magnetic and electrical properties in amorphous Ge:Mn thin films by non-magnetic codoping

Amorphous Ge{sub 1-x}Mn{sub x} thin films have been prepared by co-depositing Ge and Mn on SiO{sub 2}/Si using an ultrahigh vacuum molecular beam epitaxy system. Across a range of growth temperatures and Mn concentrations (2.8 at. %, 10.9 at. %, and 21.3 at. %), we achieved enhanced magnetic and electrical properties with non-magnetic codopants dispersed in the films. Self-assembled Mn-rich amorphous nanostructures were observed in the amorphous Ge matrix, either as isolated nanoclusters or as nanocolumns, depending on Mn concentration. The ferromagnetic saturation moments were found to increase with Mn concentration and reached a maximum of 0.7 {mu}{sub B}/Mn in the as-grown samples. Two magnetic transition temperatures around 15 K and 200 K were observed in these amorphous MBE-grown samples. Coercivity is considered within the context of local magnetic anisotropy. The anomalous Hall effect confirmed a strong correlation between the magnetization and transport properties, indicating that global ferromagnetic coupling was carrier-mediated rather than through direct exchange. In addition, negative magnetoresistance was detected from 5 K to room temperature.

36 MATERIALS SCIENCE↗

Preparation and electrical properties of the new lead-free (1 − x )Bi 0.5 Na 0.5 TiO 3 – x Ba(Ni 1/3 Nb 2/3 )O 3 piezoelectric ceramics

A new lead-free piezoelectric ceramics of (1 - x)Bi 0.5 Na 0.5 TiO 3–x Ba(Ni 1/3 Nb 2/3 )O 3 (BNT–BNN) (x = 0.0–0.07) have been prepared by a conventional solid reaction method. Their structures and electric properties have been investigated systematically. A pure perovskite phase can be formed in x ≤ 0.06. By the introduction of Ba(Ni 1/3 Nb 2/3 )O 3 , the ceramics exhibit a lower coercive field EC. Composition for x = 0.02 shows optimal piezoelectric properties, with the piezoelectric coefficient d 33 = 121 pC/N. Temperature dependent P(E) loops and S(E) curves of 0.98BNT–0.02BNN indicate that the phase transition from the ferroelectric to antiferroelectric takes place over a very wide temperature range from 75 to 150°C.

36 MATERIALS SCIENCE↗

Observation of radiation induced changes in stress and electrical properties in MOS devices

Strain measurements using X-ray diffraction were performed on irradiated commercial and radiation-hardened metal gate CMOS devices in addition to polysilicon gate NMOS devices. I-V curves were taken and V(ot) and V(it) were separated using the subthreshold slope method for all devices. A correlation has been shown to exist between physical strain relaxation and the electrical properties as a function of radiation dose and recovery. Data shown suggest that the physical response (strain relaxation) in the silicon at the oxide interface is a measure of the type of damage induced and the recovery mechanism. Postradiation measurements of Delta V(it) and Delta V(ot) taken immediately after irradiation support the conclusions of V. Zekeriya and T.-P. Ma (1983) and K. Kasama et al. (1986, 1987); compressive stress at the silicon/SiO2 interface does reduce radiation damage in the device.

Shaw, D. C.↗

Interfacial band configuration and electrical properties of LaAlO{sub 3}/Al{sub 2}O{sub 3}/hydrogenated-diamond metal-oxide-semiconductor field effect transistors

In order to search a gate dielectric with high permittivity on hydrogenated-diamond (H-diamond), LaAlO{sub 3} films with thin Al{sub 2}O{sub 3} buffer layers are fabricated on the H-diamond epilayers by sputtering-deposition (SD) and atomic layer deposition (ALD) techniques, respectively. Interfacial band configuration and electrical properties of the SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3}/H-diamond metal-oxide-semiconductor field effect transistors (MOSFETs) with gate lengths of 10, 20, and 30 μm have been investigated. The valence and conduction band offsets of the SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3} structure are measured by X-ray photoelectron spectroscopy to be 1.1 ± 0.2 and 1.6 ± 0.2 eV, respectively. The valence band discontinuity between H-diamond and LaAlO{sub 3} is evaluated to be 4.0 ± 0.2 eV, showing that the MOS structure acts as the gate which controls a hole carrier density. The leakage current density of the SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3}/H-diamond MOS diode is smaller than 10{sup −8} A cm{sup −2} at gate bias from −4 to 2 V. The capacitance-voltage curve in the depletion mode shows sharp dependence, small flat band voltage, and small hysteresis shift, which implies low positive and trapped charge densities. The MOSFETs show p-type channel and complete normally off characteristics with threshold voltages changing from −3.6 ± 0.1 to −5.0 ± 0.1 V dependent on the gate length. The drain current maximum and the extrinsic transconductance of the MOSFET with gate length of 10 μm are −7.5 mA mm{sup −1} and 2.3 ± 0.1 mS mm{sup −1}, respectively. The enhancement mode SD-LaAlO{sub 3}/ALD-Al{sub 2}O{sub 3}/H-diamond MOSFET is concluded to be suitable for the applications of high power and high frequency electrical devices.

36 MATERIALS SCIENCE↗