Development of an Atmospheric-Boundary-Layer Profile at the NASA Langley Transonic Dynamics Tunnel
Explore the source record for details and available documents.
Thomas G Ivanco↗
SEARCH · Engineering Papers
Results for “dynamic boundary”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Reduction of vanadium diffusivity within copper grain boundaries due to enhanced binding
We investigate permeation of vanadium (V) through copper (Cu) layers in V/Cu/niobium (Nb) and molybdenum (Mo)/Cu/V tri-layer composites and compare it with the permeation behavior of Nb. Despite their low solubility in single-crystal Cu, both V and Nb permeate readily due to short-circuit transport through Cu grain boundaries (GBs). However, Nb permeates preferentially to V. Atomistic simulations suggest that this difference is due to lower V diffusivity at general GBs in Cu, compared to Nb. Here, the lower V diffusivity, in turn, arises from stronger V binding to the boundary, which manifests as a greater equilibrium GB concentration as well as a higher activation energy for GB diffusion.
36 MATERIALS SCIENCE↗
Simultaneous inference of plate boundary stresses and mantle rheology using adjoints: large-scale 2-D models
SUMMARY Plate motions are a primary surface constraint on plate and mantle dynamics and rheology, plate boundary stresses and the occurrence of great earthquakes. Within an optimization method, we use plate motion data to better constrain uncertain mantle parameters. For the optimization problem characterizing the maximum a posteriori rheological parameters we derive gradients using adjoints and expressions to approximate the posterior distributions for stresses within plate boundaries. We apply these methods to a 2-D cross section from the western to eastern Pacific, with temperature distributions and fault zone geometries developed primarily from seismic and plate motion data. We find that the best-fitting stress exponent, n, is about 2.8 and the yield stress about 100 MPa or less. The normal stress on the interplate fault zones is about 100 MPa and the shear stresses about 10 MPa or less.
Rudi, Johann (ORCID:0000000265639265)↗
Determination of general relations for the behavior of turbulent boundary layers
An analysis has been made of a considerable amount of data for turbulent boundary layers along wings and bodies of various shapes in order to determine the fundamental variables that control the development of turbulent boundary layers. It was found that the type of velocity distribution in the boundary layer could be expressed in terms of a single parameter. This parameter was chosen as the ratio of the displacement thickness to the momentum thickness of the boundary layer. The variables that control the development of the turbulent boundary layer apparently are: (1) the ratio of the nondimensional pressure gradient, expressed in terms of the local dynamic pressure outside the boundary layer and boundary-layer thickness, to the local skin-friction coefficient and (2) the shape of the boundary layer. An empirical equation has been developed in terms of these variables that, when used with the momentum equation and the skin-friction relation, makes it possible to trace the development of the turbulent boundary layer to the separation point.
Von Doenhoff, Albert E↗
Turbulence and Cloud Formation in the Atmospheric Boundary Layer: Some Aspects of Stratified Turbulence
No abstract available
stratified turbulence↗
Discrete dislocation dynamics for crystal RVEs. Part 1: Periodic network kinematics
A novel implementation of the dislocation flux boundary condition in discrete dislocation dynamics is presented. The continuity of the individual dislocation loops in a periodic representative crystal volume (RVE) is enforced across the boundary of the RVE with the help of a dual topological description for representing dislocation line kinematics in two equivalent spaces representing the deforming crystal, the RVE and the unbounded crystal spaces. The former describes the motion of the dislocations in the simulated crystal RVE whereas the latter represents the motion of dislocations in an infinite space containing all replicas of the RVE. A mapping between the two spaces forms the basis of the implementation of flux boundary condition. The implementation details are discussed in the context of statistical homogeneity of bulk crystals undergoing macroscopically homogeneous plastic deformation. In this case, the boundary nodes associated with dislocation segments bear no relevance in the motion of the dislocations. Finally, some test cases are presented and discussed to establish the proposed approach.
42 ENGINEERING↗
Resonant flow in a row of small transverse cavities submerged in a turbulent boundary layer
The viscosity-dominated dynamic flow in a row of small transverse square cavities lying submerged in a turbulent boundary layer is considered. Experiments show that the cavity flow can be excited by free-stream disturbances in a narrow frequency band which is independent of the flow speed. The turbulent boundary layer in which the cavities are submerged remains transparent to the disturbances. The cavity flow resonates when the depths of the cavity and the Stokes layer match.
Bandyopadhyay, Promode R.↗
X-15 nears 100th research mission with faster version due in 1964 news release 64-3
Boundary layer, flight control, and structural dynamics research for x-15a aircraft
BOUNDARY LAYER↗
Crustal dynamics project: The interpretation of crustal dynamics data in terms of plate motions and regional deformation near plate boundaries
The focus of the research was in two broad areas: (1) the nature and dynamics of time-dependent deformation and stress along major seismic zones, and (2) the nature of long-wavelength oceanic geoid anomalies in terms of lateral variations in upper mantle temperature and composition. The principal findings are described in the appendices.
Solomon, Sean C.↗
The interpretation of crustal dynamics data in terms of plate motions and regional deformation near plate boundaries
The focus of the research was in two broad areas: (1) the nature and dynamics of time dependent deformation and stress along major seismic zones; and (2) the nature of long wavelength oceanic geoid anomalies in terms of lateral variations in upper mantle temperature and composition. The principle findings of the research are described in the accompanying appendices. The first two and the fourth appendices are reprints of papers recently submitted for publication, and the third is the abstract of a recently completed thesis supported by this project.
Soloman, Sean C.↗
Eastern Boundary Effects on General Circulation Structure
My NASA proposal included plans to examine the dynamics of the eastern oceanic boundary, with a view towards those processes important to the interior. Several relevant tasks have been completed and either have appeared or will appear soon in the refereed literature.
Dewar, William K.↗
Reciprocal interactions of hairpin-shaped vortices and a boundary layer
The present effort simulates the flow dynamics resulting from hairpin-shaped vortices in a boundary layer through the solution of the time-dependent, three-dimensional, compressible Navier-Stokes equations. Two simulations have been carried out. In the first case, the initial condition contains only one imposed hairpin-shaped vortex. In the second case, there are two incipient vortices separated by a short distance in the streamwise direction. The results add to the detailed understanding of the dynamic role of hairpin vortices in the entrainment, production and continual replenishment of turbulent structure, as well as the process of the interaction, intertwining and eventual conglomeration of vortices in boundary layers.
Liu, N.-S.↗
Dynamic Equivalence of Large-Scale Power Systems Based on Boundary Measurements
Parallel computing helped speed up many tasks that can be done independently. The advance in gaming industry did not produce a technology that helps the power industry to reduce the computation time for dynamic simulation in individual cases. To perform faster than real-time simulation for the purpose of predicting power system dynamic trajectory, power industry continues to struggle to reduce the system size and simulation time of large-scale power systems while keeping its dynamic behavior under various disturbances. There is also an acute need for real-time dynamic model reduction as more renewables enter the generation mix with dramatic changes in the generation outputs. All existing model reduction solutions are based on having access to a detailed dynamic model of the system. The system changes by the minutes, dynamic models are only updated annually. To solve this problem, wide-area measurements obtained by the phasor measurement unit (PMU) at the boundaries between the reduced system and the study system is used to represent the external area. An artificial neuro-fuzzy inference system (ANFIS) is established to perform the mapping of the measurement to the external equivalent model. Here the external area is regarded as a black-box. Model reduction studies are conducted on the Northeast Power Coordinating Council (NPCC) under various types of contingencies, by using a co-simulation approach between PSS/E and MATLAB. The results look very promising and will be discussed in this paper.
Tong, Ning↗
Direct injection of ionospheric O(+) into the dayside low latitude boundary layer
Observations from the AMPTE/Charge Composition Explorer (AMPTE/CCE) indicate the presence of two distinct O(+) populations in the dayside subsolar low latitude boundary layer during some periods of northward Interplanetary Magnetic Field (IMF). The first population is O(+) convected into the boundary layer from the outer magnetosphere and has been reported previously. It is suggested here that the new, second, O(+) population is injected into the dayside boundary layer directly from the high latitude ionosphere. This second population can have a significant density and distinct characteristics such as field-aligned flow relative to boundary layer H(+) that modify both the plasma composition and dynamics in the low latitude boundary layer.
Fuselier, S. A.↗
Shear banding, intermittency, jamming, and dynamic phases for skyrmions in inhomogeneous pinning arrays
In this work, we examine driven skyrmion dynamics in systems with inhomogeneous pinning where a strip of strong pinning coexists with a region containing no pinning. For driving parallel to the strip, we find that the initial skyrmion motion is confined to the unpinned region and the skyrmion Hall angle is zero. At larger drives, a transition occurs to a phase in which motion also appears within the pinned region, creating a shear band in the skyrmion velocity, while the skyrmion Hall angle is still zero. As the drive increases further, the flow becomes disordered and the skyrmion Hall angle increases with drive until saturating at the highest drives when the system transitions into a moving crystal phase. The different dynamic phases are associated with velocity and density gradients across the pinning boundaries. We map out the dynamic phases as a function of pinning strength, skyrmion density, and Magnus force strength, and correlate the phase boundaries with features in the velocity-force curves and changes in the local and global ordering of the skyrmion structure. For large Magnus forces, the shear banding instability is replaced by large-scale intermittent flow in the pinned region accompanied by simultaneous motion perpendicular to the direction of the drive, which appears as oscillations in the transport curves. We also examine the case of a drive applied perpendicular to the strip, where we find a jamming effect in which the skyrmion flow is blocked by skyrmion-skyrmion interactions until the drive is large enough to induce plastic flow.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
O · , H · , and · OH radical etching probability of polystyrene obtained for a radio frequency driven atmospheric pressure plasma jet
Atmospheric pressure plasma jets have great potential for the surface modification of polymers. In this work, the authors report on polystyrene etching by a radio frequency driven atmospheric pressure plasma jet with a focus on the role of H · , O · , and · OH radicals in this process. The absolute flux of H · , O · , and · OH radicals reaching the surface of the polymer was determined by a COMSOL MULTIPHYSICS reacting fluid dynamics model incorporating detailed transport phenomena in the boundary layer near the substrate. The simulated results of H · and · OH densities in the jet effluent were experimentally verified by two-photon absorption laser induced fluorescence and laser induced fluorescence, respectively. The carbon atom removal flux from the polystyrene surface was taken from previously reported measurements using the same plasma source. The authors show that the boundary layer effects in the interfacial region above the substrate can have a significant impact on the calculated etching probabilities. The reaction probability (β) has a significant uncertainty although a variation of 2 orders of magnitude in β leads to uncertainties of approximately 1 order of magnitude variation in the determined etching probability. The etching probability of polystyrene by · OH radicals was confirmed to be at least an order of magnitude larger than the polystyrene etching probability by O · radicals. The authors also confirmed the weak polystyrene etching probability by H · radicals. The model suggests that the presence of a 30 ppm O 2 impurity can lead to the production of · OH radicals in the far effluent of the Ar + 1% H 2 plasma jet close to the substrate at sufficient densities to enable effective etching.
36 MATERIALS SCIENCE↗
Dynamic stall experiments on oscillating airfoils
Dynamic stall and unsteady boundary layer separation have been studied in incompressible flow at moderately large Reynolds numbers. By varying the leading-edge geometry of an NACA 0012 airfoil, three different types of stall were produced. For most of the configurations studied, including the basic NACA 0012 profile, dynamic stall was found not to originate with the bursting of a leading-edge laminar separation bubble, as is commonly believed. Instead, the vortex shedding phenomenon, which is the predominant feature of dynamic stall, appears to be fed its vorticity by the breakdown of the turbulent boundary layer.
Mccroskey, W. J.↗
SSME LOX post flow analysis/fluid structure interaction. Volume 1: Flow analysis
The realization of measures to improve the performance of the Space Shuttle is, to a large extent, dependent on an improved understanding of the fluid flow phenomena occurring in the main engine. The overall arrangement of the primary components of the Space Shuttle Main Engine (SSME) are presented. The impingement of the hot gases from the transfer ducts onto the LOX posts causes them to be subjected to severe thermal and gas dynamic loads, which in the past have resulted in the occasional breakage of some elements of the outer row of posts during test firings of the engine, particularly at higher power levels. Large velocities in the gap between the LOX posts may also be a contributing factor in causing dynamic stability problems. The deforming structural response of the posts to the pressure loading may likely affect the gas flowfield by producing a moving flowfield boundary, thereby creating a dynamically coupled unsteady fluid-structure system. The objective was to investigate the three-dimensional, turbulent flow around a simplified SSME LOX post array using an existing Reynolds averaged Navier-Stokes flow solver and a suitable turbulence model to parameterize the turbulent shear stresses. Numerical computations were performed to analyze the effect on the flowfield of varying the spacing between the LOX posts, which were modeled as rigid, three-dimensional circular cylinders. The methodology used in the computations is described. Results are presented.
Burke, Roger W.↗