Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “droplets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Volatile propellant droplet evaporation measurements in metered dose inhaler sprays

Many aerosol products rely on the rapid vaporization of volatile propellants to produce a fine spray. In the simplest case, these are binary mixtures of propellant and a delivered product which undergo a flash-evaporation process leaving only the less volatile product in the resultant droplet. In more complex applications, such as pressurized metered-dose inhalers, the non-propellant component may contain dissolved or suspended drug which precipitates or dries to form a matured particle. The size and morphology of the particles depend strongly on the time-history of the droplet as the propellant evaporates. However, measuring the dynamic evaporation processes that occur in dense sprays containing millions of droplets is challenging. In this paper, we demonstrate a novel application of Ultra Small Angle X-ray Scattering to measure the bulk composition of volatile HFC134a–ethanol sprays and compare the obtained results with simple evaporation models in a dry nitrogen environment. The data reveal that diffusion-limiting processes inside the droplet are equally important as external convection and mixing-limited factors in determining evaporative timescales.

42 ENGINEERING↗
DOE OSTI2020

Vaporizable endoskeletal droplets via tunable interfacial melting transitions

Liquid emulsion droplet evaporation is of importance for various sensing and imaging applications. The liquid-to-gas phase transformation is typically triggered thermally or acoustically by low–boiling point liquids, or by inclusion of solid structures that pin the vapor/liquid contact line to facilitate heterogeneous nucleation. However, these approaches lack precise tunability in vaporization behavior. Here, we describe a previously unused approach to control vaporization behavior through an endoskeleton that can melt and blend into the liquid core to either enhance or disrupt cohesive intermolecular forces. This effect is demonstrated using perfluoropentane (C 5 F 12 ) droplets encapsulating a fluorocarbon (FC) or hydrocarbon (HC) endoskeleton. FC skeletons inhibit vaporization, whereas HC skeletons trigger vaporization near the rotator melting transition. Our findings highlight the importance of skeletal interfacial mixing for initiating droplet vaporization. Tuning molecular interactions between the endoskeleton and droplet phase is generalizable for achieving emulsion or other secondary phase transitions, in emulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Did the exposure of coacervate droplets to rain make them the first stable protocells?

Membraneless coacervate microdroplets have long been proposed as model protocells as they can grow, divide, and concentrate RNA by natural partitioning. However, the rapid exchange of RNA between these compartments, along with their rapid fusion, both within minutes, means that individual droplets would be unable to maintain their separate genetic identities. Hence, Darwinian evolution would not be possible, and the population would be vulnerable to collapse due to the rapid spread of parasitic RNAs. In this study, we show that distilled water, mimicking rain/freshwater, leads to the formation of electrostatic crosslinks on the interface of coacervate droplets that not only suppress droplet fusion indefinitely but also allow the spatiotemporal compartmentalization of RNA on a timescale of days depending on the length and structure of RNA. We suggest that these nonfusing membraneless droplets could potentially act as protocells with the capacity to evolve compartmentalized ribozymes in prebiotic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical Characterization of Bromine Reduction to Tribromide in Individual Nitrobenzene-in-Water Emulsion Droplets

We report an electrochemical study of bromine reduction to tribromide in a single nitrobenzene (NB) droplet during a single collision event. The feasibility of this study is based on the favorable distribution of Br 2 in NB rather than in water, which was demonstrated by voltammetry at the NB/water interface. The NB-in-water emulsions containing the ionic liquids trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)amide (ILPA) as the supporting electrolyte and sodium dodecyl sulfate (SDS) as the surfactant were prepared by a high-power ultrasonication. Its single droplet as an attoliter reactor, colliding on a 25 μm Pt UME, was monitored by chronoamperometry. The spike-type current transients of Br 2 reduction can elucidate the size and size distribution of NB, and measure the diffusion in the droplet as analyzed by a bulk electrolysis model. The frequency of collisions can provide diffusion coefficient of the droplets to the UME. Moreover, the i-t decay behavior can be simulated, which fits well with the experimental one.

25 ENERGY STORAGE↗
DOE OSTI2020

Centrifugal Generation of Droplet-Based 3D Cell Cultures

Quickly and easily producing uniform populations of microsphere-based 3D cell cultures using droplet-based templating methods has the potential to enable widespread use of such platforms in drug discovery or cancer research. Here, we advance the design of centrifuge-based droplet generation devices, describe the use of this platform for droplet generation with controlled cell occupancy, and demonstrate weeklong culture duration. Using simple-to-construct devices and easily implemented protocols, the initial concentration of encapsulated cells is adjustable up to hundreds of cells per microsphere. This work demonstrates the first instance of using centrifugal droplet-generating devices to produce large numbers of cell-encapsulating microspheres. Applications of this versatile methodology include the rapid formation of templated 3D cell culture populations suitable for suspension culture or large batch bioreactor studies that require uniform populations.

Biochemistry & Molecular Biology↗
DOE OSTI2021

Cloud Droplet Measurement System for the ARM Tethered Balloon System (TBS) Field Campaign Report

The Mesa Photonics' cloud droplet measurement system (CDMS) performs in situ measurement of droplet size distribution and droplet number density in clouds. These characteristics are important cloud microphysical properties that are critical input parameters for atmospheric models and are also useful for proper calibration and validation of performance of other atmospheric measurement instrumentation. This small campaign was the first project (out of two) that involved integration of the CDMS into the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s tethered balloon system (TBS) and its initial testing at the ARM Southern Great Plains (SGP) atmospheric observatory. The follow-up campaign (AFC07016) involved testing of the CDMS under relevant conditions at the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska and making in situ measurements in clouds. The goal of this small field campaign was to deploy the CDMS on the ARM TBS, demonstrate its integrity and compatibility with the TBS, and test the wireless telecommunication system in preparation for subsequent in-cloud measurements at ARM’s North Slope of Alaska (NSA) observatory at Utqiagvik (formerly Barrow). The specific technical objectives included: (1) Integration of the Mesa Photonics' CDMS into the ARM TBS, (2) testing of the wireless telecommunication system of the CDMS, (3) evaluating the data acquisition software and image processing algorithms especially under high-background-illumination conditions, and (4) testing the ruggedness of the instrument's optical alignment and other performance characteristics. All objectives have been successfully met. The mounting hardware was designed and built mostly at Sandia National Laboratories (SNL), which allowed reliable mounting of the CDMS on the TBS and co-locating the CDMS with other instruments. The field tests were performed by the principal investigator (PI) in collaboration with the TBS operational crew led by D. Dexheimer. The field testing demonstrated good compatibility of the CDMS with the TBS. During the TBS flights, the crew did not experience any operational issues with the CDMS. The instrument demonstrated reliable operational characteristics, including sufficient battery life and good thermal management. The wireless telecommunication system has been successfully tested at TBS flight altitudes of up to 1000 m. During all flights, the CDMS raw data were wirelessly transmitted to the ground station and processed in real time. The ruggedness of the instrument's optical alignment was evaluated by performing calibration of the CDMS (using Mesa Photonics' fixed-size monodisperse droplet generator) before and after the campaign. The calibration was stable within the instrument's measurement precision. In summary, the campaign demonstrated good compatibility of the Mesa Photonics' CDMS with the ARM TBS. The flight tests confirmed the mechanical integrity of the CDMS and stability of its optical layout, as well as reliability of the wireless telecommunication system. Successful completion of this campaign provided a solid basis for the next campaign (AFC07016, November 2020), that involved testing of the CDMS during in-cloud TBS flights at AMF3 at Oliktok Point.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Are Marine Low Cloud Droplet Concentrations Buffered by Entrained Aitken‐Mode Aerosol (Final Technical Report)

During the summertime, the high-latitude oceans come to life with green phytoplankton, which gain their energy from sunlight and are food for sea creatures small and large. When the phytoplankton are eaten or die, sulfur-rich gases are released under the ocean surface and mix into the air. Observations suggest that, over the Southern Ocean, frequent storms lift this air high into the atmosphere while raining out particulates like salt. As a result, the sulfur-rich air then spawns high concentrations of small ‘Aitken-mode’ aerosol particles. We hypothesize that these particles work their way down into the marine boundary layer, where they can replenish the supply of cloud-condensation nuclei scavenged by frequent precipitation. Further, this process maintains high concentrations of liquid cloud droplets in austral summer, promoting more sunlight to be reflected to space. We call this ‘Aitken buffering’. The primary objective of this project has been to document and test what role Aitken-mode aerosols play in clouds over the Southern Ocean and elsewhere. This effort has included three main components: 1) developing a computer model that realistically simulates the aerosol processes and the small-scale turbulent air motions that move aerosols around and create the clouds, 2) using that model to interpret and extend these observations for process understanding, by allowing different factors that contribute to the aerosol budget, such as surface wind speed, precipitation, surface gas exchange, etc. to be separated, and 3) studying Aitken-mode aerosol and its variability with a focus over the Southern Ocean and Antarctica, using data from Atmospheric Radiation Measurement (ARM) sites and other available observations. Initial computer studies in more idealized conditions found that elevated concentrations of Aitken-mode aerosols above the clouds could help prevent the breakup of those clouds by acting as cloud-condensation nuclei after they were entrained into the cloudy boundary layer. Simulations of a day during the ACE-ENA field campaign showed that Aitken-mode aerosols could also prevent cloud breakup under more realistic conditions. A new method that extracts information about Aitken-mode aerosols from measurements of aerosols onto which cloud droplets can form finds that Aitken-mode aerosols do vary seasonally over the Southern Ocean, with a peak in summertime, as described above. Other work during this project has focused on understanding how patterns of water vapor, clouds and precipitation are coupled within low-lying clouds over the oceans, and also on how cloud droplets cluster within clouds and how the distribution of cloud droplet sizes change as dry air is mixed into clouds, with the latter studies also using observations from ACE-ENA.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Detection of small drizzle droplets in a large cloud chamber using ultrahigh-resolution radar

Abstract. A large convection–cloud chamber has the potential to produce drizzle-sized droplets, thus offering a new opportunity to investigate aerosol–cloud–drizzle interactions at a fundamental level under controlled environmental conditions. One key measurement requirement is the development of methods to detect the low-concentration drizzle drops in such a large cloud chamber. In particular, remote sensing methods may overcome some limitations of in situ methods. Here, the potential of an ultrahigh-resolution radar to detect the radar return signal of a small drizzle droplet against the cloud droplet background signal is investigated. It is found that using a small sampling volume is critical to drizzle detection in a cloud chamber to allow a drizzle drop in the radar sampling volume to dominate over the background cloud droplet signal. For instance, a radar volume of 1 cubic centimeter (cm3) would enable the detection of drizzle embryos with diameter larger than 40 µm. However, the probability of drizzle sampling also decreases as the sample volume reduces, leading to a longer observation time. Thus, the selection of radar volume should consider both the signal power and the drizzle occurrence probability. Finally, observations from the Pi Convection–Cloud Chamber are used to demonstrate the single-drizzle-particle detection concept using small radar volume. The results presented in this study also suggest new applications of ultrahigh-resolution cloud radar for atmospheric sensing.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1976

Investigation of Critical Burning of Fuel Droplets

An earlier analysis for the combustion response of a liquid monopropellant strand (hydrazine) was extended to consider individual droplets and sprays. While small drops gave low or negative response, large droplets provided response near unity at low frequencies, with the response declining at frequencies greater than the characteristic liquid phase frequency. Temperature gradients in the liquid phase resulted in response peaks greater than unity. A second response peak was found for large drops which corresponded to gas phase transient effects. Spray response was generally reduced from the response of the largest injected droplet, however, even a small percentage of large droplets can yield appreciable response. An apparatus was designed and fabricated to allow observation of bipropellant fuel spray combustion at elevated pressures. A locally homogeneous model was developed to describe this combustion process which allows for high pressure phenomena associated with the thermodynamic critical point.

Chanin, S. P.↗
NASA NTRS1976

Oscillatory combustion of monopropellant droplets

A theoretical study of combustion response to imposed pressure oscillations was conducted for monopropellant droplets and sprays. A first-order perturbation analysis was used, yielding the linear response. Transient gas phase phenomena were considered in some cases, but the bulk of the calculations assume a quasi-steady gas phase. The calculations employed properties representative of hydrazine decomposition. Calculated steady combustion results and response predictions for large hydrazine droplets agreed favorably with earlier measurements. Droplet and spray response factors in excess of unity were found. High response was associated with high pressures (1000-10,000 kN/sq m), large droplets, large mean liquid temperature gradients, and frequencies near the characteristic frequency of the liquid phase thermal wave. Spray response factors are lower than the response factor of the largest injected drop, however, a small percentage of large drops can still provide substantial response for the combustion process.

Chanin, S. P.↗
NASA NTRS1978

Some aspects of the interaction of radiation with the thermal and mass budgets of cloud droplets

It is shown that the effects of radiative heating or cooling can have a substantial influence on the mass budget of a cloud droplet and thus on the microphysical properties of a cloud as a whole. The radiative transfer equation, including all orders of multiple scattering, is solved for spectral windows of earth's atmosphere by adopting the Eddington approximation and assuming that the cloud is isothermal and illuminated by fluxes from both the ground and the sky. The results obtained for the 8-12-micron window indicate that radiative cooling can increase a droplet's growth rate and may also make the droplet cooler than the surrounding gas while water vapor is diffusing in, which would cause diffusiophoreisis and thermophoreisis to combine and increase the efficiency with which droplets would scavenge aerosols.

Barkstrom, B. R.↗
NASA NTRS1978

Recognition of lunar glass droplets produced directly from endogenous liquids - The evidence from S-ZN coatings

Concentrated deposits of ultramafic droplets of green glass at Apollo 15 and orange and black glass at Apollo 17 are generally accepted as having volcanic, and so endogenous, origins. Since these droplets have S + Zn surface coatings with characteristics that fit a volcanic origin, the presence of similar coatings on dispersed droplets are taken as a good criterion of their volcanic origin. This criterion in concert with other criteria (homogeneity, absence of shocked relicts) that distinguish between volcanic and impact origins, has led to identification of a new ultramafic endogenous liquid that was erupted at Apollo 15. The brown glass droplets representing this liquid have a higher TiO2 content and are more mafic than any of the Apollo 15 basalts.

Butler, P., Jr.↗
NASA NTRS1979

Nucleation of electrically charged droplets

The nucleating droplets or clusters in many nucleation environments (various colloidal plasmas in laboratory and technological applications, astrophysical condensation environments, etc.) are likely to be at a finite electric potential. This may be due either to the presence of electrons and ions in the gas phase or to the thermal ionization or photoionization of the droplets. The paper demonstrates that this potential may introduce a nontrivial modification in the conventional nucleation theory. Some results for the typical case of nucleation of water droplets are presented. The general conclusion is that the electric potential makes nucleation harder to achieve, thereby demonstrating the importance of a finite droplet potential in the theory of nucleation.

De, B. R.↗
NASA NTRS1980

Liquid droplet radiators for heat rejection in space

A radiator for heat rejection in space is described which utilizes a stream of liquid droplets to radiate waste heat. The large surface area per mass makes the liquid droplet radiator at least an order of magnitude lighter than tube and fin radiators. Generation and collection of the droplets, as well as heat transfer to the liquid, can be achieved with modest extensions of conventional technology. Low vapor pressure liquids are available which cover a radiating temperature range 250-1000 K with negligible evaporation losses. The droplet radiator may be employed for a wide range of heat rejection applications in space. Three applications - heat rejection for a high temperature Rankine cycle, cooling of photovoltaic cells, and low temperature heat rejection for refrigeration in space illustrate the versatility of the radiator.

Mattick, A. T.↗
NASA NTRS1981

Two-stream Maxwellian kinetic theory of cloud droplet growth by condensation

A new growth rate formula (NGRF) is developed for the rate of growth of cloud droplets by condensation. The theory used is a modification of the Lees-Shankar theory in which the two-stream Maxwellian distribution function of Lees is used in Maxwell's method of moments to determine the transport of water vapor to and heat away from the droplet. Boundary conditions at the droplet are the usual conditions set in terms of accommodation coefficients, and the solution passes smoothly into diffusion flow in the far region. Comparisons are given between NGRF and the conventional formula showing close agreement (approximately 0.1%) for large radii with significant difference (approximately 5%) for small radii (not greater than 1 micron). Growth times for haze droplets in a Laktionov chamber are computed.

Robinson, N. F.↗
NASA NTRS1953

Impingement of Water Droplets on NACA 65A004 Airfoil and Effect of Change in Airfoil Thickness from 12 to 4 Percent at 4 deg Angle of Attack

The trajectories of droplets in the air flowing past an NACA 65A004 a irfoil at an angle of attack of 4 deg were determined. The amount of water in droplet form impinging on the airfoil, the area of droplet impingement, and the rate of droplet impingement per unit area on the airfoil surface were calculated from the trajectories and presented to cover a large range of flight and atmospheric conditions. The effect of a change in airfoil thickness from 12 to 4 percent at 4 deg angle of attack is presented by comparing the impingement calculations for the NACA 65A004 airfoil with those for the NACA 65(sub 1)-208 and 65(sub 1)-212 airfoils. The rearward limit of impingement on the upper surface decreases as the airfoil thickness decreases. The rearward limit of impingement on the lower surface increases with a decrease in airfoil t hickness. The total water intercepted decreases as the airfoil thickness is decreased.

Brun, Rinaldo J.↗
NASA NTRS1953

Impingement of water droplets on NACA 65(1)-208 and 65(1)-212 airfoils at 4 degrees angle of attack

The trajectories of droplets in the air flowing past NACA 65(1)-208 airfoil and an NACA 65(1)-212 airfoil, both at an angle of attack of 4 degrees, were determined. The amount of water in droplet form impinging on the airfoils, the area of droplet impingement, and the rate of droplet impingement per unit area on the airfoil surface affected were calculated from the trajectories and are presented. The amount, extent, and rate of impingement of the NACA 65(1)-208 airfoil are compared with the results for the NACA 65(1)1-212 airfoil. Under similar conditions of operation, the NACA 65(1)-208 airfoil collects less water than the NACA 65(1)-212 airfoil. The extent of impingement on the upper surface of the NACA 65(1)-208 airfoil is much less than on the upper surface of the NACA 65(1)-212 airfoil, but on the lower surface the extents of impingement are about the same.

Brun, R. J.↗
NASA NTRS1954

Impingement of Water Droplets on an Ellipsoid with Fineness Ratio 5 in Axisymmetric Flow

The presence of radomes and instruments that are sensitive to water films or ice formations in the nose section of all-weather aircraft and missiles necessitates a knowledge of the droplet impingement characteristics of bodies of revolution. Because it is possible to approximate many of these bodies with an ellipsoid of revolution, droplet trajectories about an ellipsoid of revolution with a fineness ratio of 5 were computed for incompressible axisymmetric air flow. From the computed droplet trajectories, the following impingement characteristics of the ellipsoid surface were obtained and are presented in terms of dimensionless parameters: (1) total rate of water impingement, (2) extent of droplet impingement zone, (3) distribution of impinging water, and (4) local rate of water impingement.

Dorsch, Robert G.↗