Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

NiGa 2 O 4 interfacial layers in NiO/Ga 2 O 3 heterojunction diodes at high temperature

NiO/Ga 2 O 3 heterojunction diodes have attracted attention for high-power applications, but their high temperature performance and reliability remain underexplored. Here, we report the time evolution of the electrical properties in the widely studied p-NiO/n-Ga 2 O 3 heterojunction diodes and formation of NiGa 2 O 4 interfacial layers at high temperatures. Results of our thermal cycling experiment show an initial leakage current increase which stabilizes after sustained thermal load, due to reactions at the NiO–Ga 2 O 3 interface. High-resolution TEM microstructure analysis of the devices after thermal cycling indicates that the NiO–Ga 2 O 3 interface forms a ternary compound at high temperatures, and thermodynamic calculations suggest the formation of the spinel NiGa 2 O 4 layer between NiO and Ga 2 O 3 . First-principles defect calculations find that NiGa 2 O 4 shows low p-type intrinsic doping and hence can serve to limit electric field crowding at the interface. Vertical NiO/ Ga 2 O 3 diodes with intentionally grown 5 nm thin spinel-type NiGa 2 O 4 interfacial layers show an excellent device ON/OFF ratio of >10 10 (± 3 V), V ON of ~1.9 V, and increased breakdown voltage of ~1.2 kV for an initial unoptimized 300 lm diameter device. These p–n heterojunction diodes are promising for high-voltage, high temperature applications.

30 DIRECT ENERGY CONVERSION↗

Efficiency cliff in scaling InGaN light-emitting diodes down to submicron

The top-down submicron fabrication of blue-emitting light-emitting diodes on Qromis Substrate Technology substrates is reported. Light-emitting diodes with mesa sizes as small as 250 × 250 nm 2 show ideal forward voltage and low leakage current density. It is observed that sidewall treatment and passivation methods used in micro-light-emitting diodes (2–20 μ m) do not lead to the same level of sidewall recombination suppression for submicron ones (< 1 μ m), as evidenced by a ∼70% decrease in peak external quantum efficiencies when mesa sizes are scaled from 2 μ m down to 250 nm. This is attributed to the lateral carrier diffusion being comparable to the mesa size, regardless of the sidewall passivation and recovery. The results call for rethinking the impact of sidewalls in emerging top-down fabricated (sub)micrometer-light-emitting diodes.

42 ENGINEERING↗

Magnus force induced magnetic diode effect in skyrmion systems

We show that skyrmions can exhibit a “magnetic diode effect,” where there is a nonreciprocal response in the transport when the magnetic field is reversed. This effect can be achieved for skyrmions moving in channels with a sawtooth potential on one side and a reversed sawtooth potential on the other side. We consider the cases of both spin-transfer torque (STT) and spin–orbit torque (SOT). When the magnetic field is held fixed, the velocity response of the skyrmion is the same for current applied in either direction for both torques, so there is no current diode effect. When the magnetic field is reversed, under STT driving the velocity of the skyrmion reverses and its absolute value changes. Under SOT driving, the velocity remains in the same direction but drops to a much lower value, resulting in negative differential conductivity. For a fixed current, we find a nonreciprocal skyrmion velocity as a function of the applied field’s sign, in analogy to the velocity–current curves observed in the usual diode effect. The nonreciprocity is generated by the Magnus force, which causes skyrmions to interact preferentially with one side of the channel. Since the channel sides have opposite asymmetry, a positive magnetic field can cause the skyrmion to interact with the “hard” asymmetry side of the channel, while a negative magnetic field causes the skyrmion to interact with the “easy” asymmetry side. This geometry could be used to create new kinds of magnetic-field-induced diode effects that can be harnessed in new types of skyrmion-based devices.

36 MATERIALS SCIENCE↗

Improving the efficiency of high-power diode lasers using diamond heat sinks

Using multifunctional ion beam and magnetron sputtering systems, we have developed chemical and vacuum techniques for producing metallic coatings firmly adherent to various surfaces, with application to copper and diamond heat sinks for diode lasers. Conditions have been optimised for mounting diode lasers and bars using the proposed metallisation processes, and significant improvements in the output parameters of the devices have been achieved. The power output of cw laser diodes on diamond heat sinks increases by up to a factor of 2, the linear (working) portion of their power-current characteristic becomes markedly broader, and their slope efficiency increases by a factor of 1.5 - 2 relative to that of lasers on copper heat spreaders. The use of diamond heat sinks extends the drive current range of pulsed diode bars by a factor of 2 - 3 and enables them to operate at more than one order of magnitude longer pump pulse durations (up to milliseconds) when the pulse repetition rate is at least 10 Hz. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-voltage regrown nonpolar m -plane vertical p-n diodes: A step toward future selective-area-doped power switches

Here, we report high-voltage regrown nonpolar m-plane p-n diodes on freestanding GaN substrates. Secondary-ion mass spectroscopy (SIMS) measurements indicate O and Si spikes at the regrowth interfaces with maximum concentration ~ 5×10 17 cm -3 , which is similar to previously published c-plane studies. A high blocking voltage of 540 V at ~ 1 mA/cm2 (corresponding to an electric field of E ~ 3.35 MV/cm), turn-on voltages between 2.9-3.1 V, specific on-resistance of 1.7 mΩ.cm 2 at 300 A/cm 2 , and a minimum ideality factor of 1.7 were obtained for the regrown diodes. Our results suggest that Si, O and C interfacial impurity levels up to 2×10 17 cm -3 , 8×10 17 cm -3 , and 1×10 19 cm -3 , respectively, at the metallurgical junction of m-plane p-n diodes do not result in very early breakdown in the reverse bias, although the off-state leakage current in forward bias is affected. The impact of growth interruption/regrowth on diode performance is also investigated.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Electrical properties of silicon schottky diodes containing metal films of various compositions

Au{sub x}Ti{sub 100{sub -}} {sub x}/n-Si Schottky diodes are fabricated and studied; in addition, the electrical properties of diodes containing metal films with varying composition (x = 0, 14, 30, 38, 60, 80, and 100) are also studied. Using X-ray phase analysis, it is established that the film of Au{sub 38}Ti{sub 62} composition has the amorphous structure, while the remaining films Au{sub x}Ti{sub 100-x} possess the polycrystalline structure. The main parameters of the Schottky diodes are determined in relation to the composition and structure of the metal films. As a result, it is shown that the electrical properties of Au{sub x}Ti{sub 100-x}/n-Si Schottky diodes are related to variations in the composition and structure of metal films.

36 MATERIALS SCIENCE↗

Edge and defect luminescence of powerful ultraviolet InGaN/GaN light-emitting diodes

The spectrum of ultraviolet (UV) InGaN/GaN light-emitting diodes and its dependence on the current flowing through the structure are studied. The intensity of the UV contribution to the integrated diode luminescence increases steadily with increasing density of current flowing through the structure, despite a drop in the emission quantum efficiency. The electroluminescence excitation conditions that allow the fraction of UV emission to be increased to 97% are established. It is shown that the nonuniform generation of extended defects, which penetrate the active region of the light-emitting diodes as the structures degrade upon local current overheating, reduces the integrated emission intensity but does not affect the relative intensity of diode emission in the UV (370 nm) and visible (550 nm) spectral ranges.

36 MATERIALS SCIENCE↗

Graphite/p-SiC Schottky Diodes Prepared by Transferring Drawn Graphite Films onto SiC

Graphite/p-SiC Schottky diodes are fabricated using the recently suggested technique of transferring drawn graphite films onto p-SiC single-crystal substrates. The current–voltage and capacitance–voltage characteristics are measured at different temperatures and at different frequencies of a small-signal AC signal, respectively. The temperature dependences of the potential-barrier height and of the series resistance of the graphite/p-SiC junctions are measured and analyzed. The dominant mechanisms of the charge–carrier transport through the diodes are determined. It is shown that the dominant mechanisms of the transport of charge carriers through the graphite/p-Si Schottky diodes at a forward bias are multi-step tunneling recombination and tunneling described by the Newman formula (at high bias voltages). At reverse biases, the dominant mechanisms of charge transport are the Frenkel–Poole emission and tunneling. It is shown that the graphite/p-SiC Schottky diodes can be used as detectors of ultraviolet radiation since they have the open-circuit voltage V{sub oc} = 1.84 V and the short-circuit current density I{sub sc} = 2.9 mA/cm{sup 2} under illumination from a DRL 250-3 mercury–quartz lamp located 3 cm from the sample.

36 MATERIALS SCIENCE↗

Effect of the Hydrogen Concentration on the Pd/n-InP Schottky Diode Photocurrent

The variation rate of the short-circuit photocurrent of Pd/n-InP Schottky diodes is studied as a function of the presence of hydrogen in a gas mixture with H{sub 2} concentrations of 1–100 vol %. It is shown that upon the simultaneous exposure of the Schottky diode to a hydrogen-containing gas mixture and to light (λ = 0.9 μm), the hydrogen concentration in the gas mixture and the Pd/n-InP diode photocurrent variation rate are related exponentially. The Schottky-diode response rate to the presence of hydrogen in the gas mixture increases with the illumination intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatial Filtering of a Diode Laser Beam for Confocal Raman Microscopy

With the development of single-longitudinal mode diode lasers, there has been an increase in using these sources for Raman spectroscopy. This is largely due to the cost-effectiveness of diode lasers, which offer savings not only in initial capital cost, but also electrical, cooling, and replacement costs over time, when compared with ion lasers. Here, the use of diode-lasers in confocal Raman microscopy has remained a challenge, however, due to poor transverse beam quality. In this work, we present the design and implementation of a simple spatial filter capable of adapting a single-mode diode laser source to confocal Raman microscopy, yielding comparable spatial resolution as a gas-ion laser beam for profiling and optical-trapping applications. For profiling applications, spatial filtering improved x,y resolution of the beam by a factor 10, which in turn increased optical-trapping forces by ~90 times and yielded sevenfold greater Raman scattering signal intensity from an optically trapped phospholipid vesicle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis and Optimization of "Full-Length" Diodes

A method of analyzing the axial variation of the heat generation rate, temperature, voltage, current density and emitter heat flux in a thermionic converter is described. The method is particularly useful for the case of "long" diodes, each extending over the full length of the reactor core. For a given diode geometry and fuel distribution, the analysis combines a nuclear solution of the axial fission density profile with the iterative solution of four differential equations representing the thermal, electrical, and thermionic interactions within the diode. The digital computer program developed to solve these equations can also perform a design optimization with respect to lead resistance, load voltage, and emitter thickness, for a specified maximum emitter temperature. Typical results are presented, and the use of this analysis for predicting the diode operating characteristics is illustrated.

Full Length Diodes↗

High Efficiency Fiber-Coupled Diode Lasers for Resonant Pumping of Fiber Lasers

In this program, we have been developing high power, high efficiency laser diodes in InP, operating at 1532 nm and 1910 nm. These lasers have applications in resonant pumping eye-safe laser gain media, such as Erbium or Thulium doped fiber lasers, emitting in the ranges of 1600 nm and 1800-2000 nm, respectively. While such fiber lasers may be pumped with shorter wavelength diode lasers (e.g. 790 nm or 976 nm GaAs didoes), there are advantages to pumping with diode laser light that is closer in wavelength to the fiber laser emission, a technique known as resonant pumping. These advantages include lower quantum defect (the energy lost due to pump and emission at different wavelengths), increased eye-safety of system, decreased waste heat, and potential for lower overall system efficiency. We have achieved diode laser performance with peak electrical-to-optical (EO) efficiency of 39% at 15xx nm and 13% at 19xx nm, a significant advancement over current state-of-the-art. The rated output power and efficiency for these lasers are 4.0 W at 34% EO for 15xx nm, and 1.1 W at 11% EO for 19xx nm. We have designed and built a fiber-coupled-module at 15xx nm. There are many improvements to be made to increase the output power and efficiency of the module, but in our preliminary demonstration, we have achieved a fiber coupling efficiency of 85%.

99 GENERAL AND MISCELLANEOUS↗

A 640 GHz Planar-Diode Fundamental Mixer/Receiver

The design and performance of a 640 GHz solid-state receiver using a fundamental planar-Schottky-diode mixer, InP Gunn diode oscillator, whisker-contacted Schottky-varactor-diode sextupler and folded-Fabry-Perot diplexer are reported.

oscillator↗

Hybrid BaTiO 3 /SiN x /AlGaN/GaN lateral Schottky barrier diodes with low turn-on and high breakdown performance

In this Letter, we demonstrate hybrid GaN lateral Schottky barrier diodes with enhanced breakdown characteristics and a low turn-on voltage. These diodes incorporate a lateral Schottky barrier in combination with a high permittivity material beneath the field plate, enabling high average breakdown fields and a low turn-on voltage. Average electric fields up to 2.38 MV/cm were achieved for devices with an anode–cathode spacing of 4 μm, while maintaining with a turn-on voltage of 0.48 V. In contrast, SiN x /AlGaN/GaN control lateral Schottky diodes displayed an average breakdown field of ~0.7 MV/cm for devices with similar dimensions with a turn-on voltage of 0.46 V. The use of a high-permittivity dielectric can more effectively utilize the high breakdown fields in wide bandgap materials by proper management of the electric field. This demonstration provides an innovative way to integrate high-permittivity materials with GaN lateral devices for improved breakdown and resistance characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An All Hydrophilic Fluid Diode for Unidirectional Flow in Porous Systems

Abstract A fluid diode that allows fluid flow in one direction but blocks fluid flow in the opposite direction has wide applications including oil recovery, drug delivery, and lab‐on‐a‐chip microfluidics. Many studies are conducted to facilitate directional liquid motion on the solid surface or across thin porous layers. However, the self‐driven one‐way flow inside porous systems still remains a significant challenge. Here, a novel all‐hydrophilic fluid diode (AHFD) made of porous materials with asymmetric pores is reported, which allows capillary flow in a chosen direction. The direction‐dependent flow process and the breakthrough pressure are experimentally and theoretically examined. The proposed AHFD can have many potential applications such as functional protective clothing, microfluidic valve, and oil–water separator, and the idea can be extended to develop other all lyophilic fluid diodes such as oleophilic diode.

Shou, Dahua↗

Nano-crystalline p-ZnGa{sub 2}Te{sub 4}/n-Si as a new heterojunction diode

Graphical abstract: Display Omitted Highlights: ► ZnGa{sub 2}Te{sub 4}/Si thin film was prepared by thermal evaporation technique. ► XRD and AFM graphs support the nano-crystalline of the studied device. ► Dark current–voltage characteristics of the heterojunction diode were investigated. ► Electrical parameters and conduction mechanism were determined. ► Conduction mechanisms were controlled by TE, SCLC and TCLC. -- Abstract: In this communication, ZnGa{sub 2}Te{sub 4} thin film was prepared by thermal evaporation technique on n-Si substrate. P-ZnGa{sub 2}Te{sub 4}/n-Si heterojunction diode was fabricated. The structure of ZnGa{sub 2}Te{sub 4} thin film was checked by XRD pattern and confirmed by AFM micrographs. The dark current–voltage characteristics of the heterojunction diode were investigated to determine the electrical parameters and conduction mechanism as a function of forward and reverse biasing conditions in the range (−10 V to 10 V) at temperature interval (303–423 K). The conduction mechanism was controlled by thermionic emission, space charge limited (SCLC) and trap-charge limited current (TCLC) mechanisms. The basic parameters such as the series resistance R{sub s}, the shunt resistance R{sub sh}, the ideality factor n and the barrier height φ{sub b} of the diode, the total density of trap states N{sub 0} and the exponential trapping distribution P{sub o} were determined. The obtained results showed that ZnGa{sub 2}Te{sub 4} is a good candidate for the applications of electronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Trap assisted space charge conduction in p-NiO/n-ZnO heterojunction diode

Highlights: • p-NiO/n-ZnO heterojunction diode with enhanced junction parameters has been prepared. • Temperature dependent I–V throw insight into the involved conduction mechanism. • SCLC with exponential trap distribution was found to be the dominant mechanism. • C–V measurement at different frequencies support the presence of traps. - Abstract: The development of short-wavelength p–n junction is essentially important for the realization of transparent electronics for next-generation optoelectronic devices. In the present work, a p–n heterojunction diode based on p-NiO/n-ZnO has been prepared under the optimised growth conditions exhibiting improved electrical and junction parameters. The fabricated heterojunction gives typical current–voltage (I–V) characteristics with good rectifying behaviour (rectification ratio ≈ 10{sup 4} at 2 V). The temperature dependent current–voltage characteristics of heterojunction diode have been studied and origin of conduction mechanism is identified. The space-charge limited conduction with exponential trap distribution having deep level trap is found to be the dominant conduction mechanism in the fabricated p–n heterojunction diode. The conduction and valence band discontinuities for NiO/ZnO heterostructure have been determined from the capacitance–voltage (C–V) measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Demonstration of a 9 kV reverse breakdown and 59 mΩ-cm 2 specific on-resistance AlGaN/GaN Schottky barrier diode

Here, Al 0.26 Ga 0.74 N/GaN on SiC lateral Schottky diodes were fabricated with variable anode-to-cathode spacing and were analyzed for blocking and on-state device performance. On-chip normally-on High Electron Mobility Transistor (HEMT) structures were also fabricated for a comparison of blocking characteristics. The Schottky diode displayed an ideality factor of 1.59 with a Ni/AlGaN zero bias barrier height of 1.18 eV and a flat band barrier height of 1.59 eV. For anode-to-cathode spacings between 10 and 100 μm, an increase in median breakdown voltages from 529 V to 8519 V and median specific on-resistance ( R on-sp ) from 1.5 to 60.7 mΩ cm 2 was observed with an increase in spacing. The highest performing diode had a lateral figure of merit of 1.37 GW/cm 2 corresponding to a breakdown voltage upwards of 9 kV and a R on-sp of 59 mΩ cm 2 . This corresponds to the highest Schottky diode breakdown voltage reported thus far with an Al 0.26 Ga 0.74 N/GaN lateral structure.

42 ENGINEERING↗