SEARCH · Engineering Papers

Results for “dimensional changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Solution of axisymmetric and two-dimensional inviscid flow over blunt bodies by the method of lines

Comparisons with experimental data and the results of other computational methods demonstrated that very accurate solutions can be obtained by using relatively few lines with the method of lines approach. This method is semidiscrete and has relatively low core storage requirements as compared with fully discrete methods since very little data were stored across the shock layer. This feature is very attractive for three dimensional problems because it enables computer storage requirements to be reduced by approximately an order of magnitude. In the present study it was found that nine lines was a practical upper limit for two dimensional and axisymmetric problems. This condition limits application of the method to smooth body geometries where relatively few lines would be adequate to describe changes in the flow variables around the body. Extension of the method to three dimensions was conceptually straightforward; however, three dimensional applications would also be limited to smooth body geometries although not necessarily to total of nine lines.

Hamilton, H. H., II↗

NASA NTRS1979

Supercritical tests of a self-optimizing, variable-Camber wind tunnel model

A testing procedure was used in a 16-foot Transonic Propulsion Wind Tunnel which leads to optimum wing airfoil sections without stopping the tunnel for model changes. Being experimental, the optimum shapes obtained incorporate various three-dimensional and nonlinear viscous and transonic effects not included in analytical optimization methods. The method is a closed-loop, computer-controlled, interactive procedure and employs a Self-Optimizing Flexible Technology wing semispan model that conformally adapts the airfoil section at two spanwise control stations to maximize or minimize various prescribed merit functions subject to both equality and inequality constraints. The model, which employed twelve independent hydraulic actuator systems and flexible skins, was also used for conventional testing. Although six of seven optimizations attempted were at least partially convergent, further improvements in model skin smoothness and hydraulic reliability are required to make the technique fully operational.

Levinsky, E. S.↗

NASA NTRS1979

Design and test of a prototype scale ejector wing

A two dimensional momentum integral analysis was used to examine the effect of changing inlet area ratio, diffuser area ratio, and the ratio of ejector length to width. A relatively wide range of these parameters was considered. It was found that for constant inlet area ratio the augmentation increases with the ejector length, and for constant length: width ratio the augmentation increases with inlet area ratio. Scale model tests were used to verify these trends and to examine th effect of aspect ratio. On the basis of these results, an ejector configuration was selected for fabrication and testing at a scale representative of an ejector wing aircraft. The test ejector was powered by a Pratt-Whitney F401 engine developing approximately 12,000 pounds of thrust. The results of preliminary tests indicate that the ejector develops a thrust augmentation ratio better than 1.65.

Mefferd, L. A.↗

NASA NTRS1986

Static investigation of two STOL nozzle concepts with pitch thrust-vectoring capability

A static investigation of the internal performance of two short take-off and landing (STOL) nozzle concepts with pitch thrust-vectoring capability has been conducted. An axisymmetric nozzle concept and a nonaxisymmetric nozzle concept were tested at dry and afterburning power settings. The axisymmetric concept consisted of a circular approach duct with a convergent-divergent nozzle. Pitch thrust vectoring was accomplished by vectoring the approach duct without changing the nozzle geometry. The nonaxisymmetric concept consisted of a two dimensional convergent-divergent nozzle. Pitch thrust vectoring was implemented by blocking the nozzle exit and deflecting a door in the lower nozzle flap. The test nozzle pressure ratio was varied up to 10.0, depending on model geometry. Results indicate that both pitch vectoring concepts produced resultant pitch vector angles which were nearly equal to the geometric pitch deflection angles. The axisymmetric nozzle concept had only small thrust losses at the largest pitch deflection angle of 70 deg., but the two-dimensional convergent-divergent nozzle concept had large performance losses at both of the two pitch deflection angles tested, 60 deg. and 70 deg.

Mason, M. L.↗

NASA NTRS1987

Color-Video Thermal Maps

Computer-simulation method produces color-video representation of temperatures in combustion-chamber wall. New method displays two-dimensional or three-dimensional temperature variation. Colors in display represent specific temperature ranges. Colors change to show changes in temperature with flow, pressure, heat flux, and other factors during startup, steady-state operation, and shutdown.

Wagner, W. R.↗

NASA NTRS1986

MHD bending waves in a current sheet

Transverse MHD bending waves are considered in an isothermal and compressible two-dimensional current sheet of finite thickness in which the magnetic field changes direction and strength. The general form of the wave equation is obtained. It is shown that rotation of the magnetic field across the current sheet prevents the existence of singular points so that continuous spectrum solutions and the concomitant wave decay disappear. Instead, normal modes exist and closed integral solution for arbitrary current sheet structure are found. The results are discussed in terms of small-scale waves on the heliospheric current sheet.

Musielak, Z. E.↗

NASA NTRS1990

Radiobrightness of diurnally heated, freezing soil

Freezing and thawing soils exhibit unique radiometric characteristics. To examine these characteristics, diurnal insolation is modeled as one-dimensional heating of a moist soil half-space during a typical fall at a northern Great Plains site. The one-dimensional heat flow equation is nonlinear because both the enthalpy (the change in internal energy with temperature at constant pressure) and the thermal conductivity of freezing soils are nonlinear functions of temperature. The problem is particularly difficult because phase boundaries propagate in time, and because soils, particularly clay-rich soils, freeze over a range of temperatures rather than at 0 C. Diurnal radiobrightness curves at 10.7, 18.0, and 37.0-GHz were computed for each month. The 37.0-GHz radiobrightness best tracks soil surface temperature; the 10.7-37.0-GHz spectral gradient of thawed soils is strongly positive; the spectral gradient of frozen soils is slightly negative; and the midnight-to-noon spectral gradient is shifted by approximately +0.1 K/GHz by diurnal changes in the surface temperature and the thermal gradient. These observations support the use of the scanning multichannel microwave radiometer 37.0-GHz radiobrightness and its 10.7-37.0-GHz spectral gradient as discriminants in a frozen soil classifier for high-latitude prairie.

England, Anthony W.↗

NASA NTRS1990

A novel electron tunneling infrared detector

The pneumatic infrared detector, originally developed by Golay in the late 1940s, uses the thermal expansion of one cm(exp 3) of xenon at room temperature to detect the heat deposited by infrared radiation. This detector was limited by thermal fluctuations within a 10 Hz bandwidth, but suffered from long thermal time constants and a fragile structure. Nevertheless, it represents the most sensitive room temperature detector currently available in the long wavelength infrared (LWIR). Fabrication of this type of detector on smaller scales has been limited by the lack of a suitably sensitive transducer. Researchers designed a detector based on this principle, but which is constructed entirely from micromachined silicon, and uses a vacuum tunneling transducer to detect the expansion of the trapped gas. Because this detector is fabricated using micromachining techniques, miniaturization and integration into one and two-dimensional arrays is feasible. The extreme sensitivity of vacuum tunneling to changes in electrode separation will allow a prototype of this detector to operate in the limit of thermal fluctuations over a 10 kHz bandwidth. A calculation of the predicted response and noise of the prototype is presented with the general formalism of thermal detectors. At present, most of the components of the prototype have been fabricated and tested independently. In particular, a characterization of the micromachined electron tunneling transducer has been carried out. The measured noise in the tunnel current is within a decade of the limit imposed by shot noise, and well below the requirements for the operation of an infrared detector with the predicted sensitivity. Assembly and characterization of the prototype infrared detector will be carried out promptly.

Kenny, T. W.↗

NASA NTRS1990

Polarimetric radar imaging of the atmosphere

This paper deals with a new scheme of mapping the atmosphere using a wide band radar system where broad band noise is transmitted instead of single frequency. This type of radar system makes it possible to map the atmosphere with a single pulse and to observe fast changing features of atmosphere like lightning discharge and associated features. Three dimensional range-time plots and polarization signal statistics are presented to illustrate the advantages of this technique.

Manjunath, T. G.↗

NASA NTRS1991

Stability of Co-gamma-Fe2O3 tape

The viewgraphs of a discussion on the stability of recording media presented at the National Space Science Data Center (NSSDC) Mass Storage Workshop is included. An overview of archival stability of recording media is presented. Co-gamma-Fe2O3 tape is discussed. Other topics covered are magnetic tape components, dimensional stability and crossply, acetone extraction, coercivity, and phi R percent change.

Carlson, Darlene M.↗

NASA NTRS1992

On the role of secondary instabilities in laminar-turbulent transition of 2D and 3D boundary layers

The accurate prediction of laminar/turbulent transition is one of the fundamental problems in engineering fluid mechanics. There is almost unanimous consent that such a transition criterion should come from stability theory. Linear primary stability theory describes the initial stage of transition, but falls short of predicting transition. Only in conjunction with empirical correlations, the widely used e(sup n) method is obtained, which, however, lacks a solid physical base. Three-dimensional secondary instabilities are known to play an important role in the transition process. However, no use has been made so far of secondary instabilities, instability interactions or wave resonances to define a 'transition location'. The paper summarizes new attempts to identify certain interaction and resonance phenomena within the laminar-turbulent transition regime in two and three-dimensional boundary layers which are associated with rapid structural and temporal changes of fluctuations beyond their exponential growths.

Dallman, Uwe↗

NASA NTRS1991

Heat-pipe transient model for space applications

A two-dimensional model is developed for simulating heat pipes transient performance following changes in the input/rejection power or in the evaporator/condenser temperatures. The model employs the complete form of governing equations and momentum and energy jump conditions at the liquid-vapor interface. Although the model is capable of handling both cylindrical and rectangular geometries, the results reported are for a circular heat pipe with liquid lithium as the working fluid. The model incorporates a variety of other working fluids, such as water, ammonia, potassium, sodium and mercury, and offers combinations of isothermal, isoflux, convective and radiative heating/cooling conditions in the evaporator and condenser regions of the heat pipe. Results presented are for lithium heat pipes with exponential heating of the evaporator and isothermal cooling of the condenser.

Tournier, Jean-Michel↗

NASA NTRS1949

Two-dimensional unsteady lift problems in supersonic flight

The variation of pressure distribution is calculated for a two-dimensional supersonic airfoil either experiencing a sudden angle-of-attack change or entering a sharp-edge gust. From these pressure distributions the indicial lift functions applicable to unsteady lift problems are determined for two cases. Results are presented which permit the determination of maximum increment in lift coefficient attained by an unrestrained airfoil during its flight through a gust. As an application of these results, the minimum altitude for safe flight through a specific gust is calculated for a particular supersonic wing of given strength and wing loading.

Heaslet, Max A↗

NASA NTRS1992

Residual thermal stresses in composites for dimensionally stable spacecraft applications

An overview of NASA LaRC's research on thermal residual stresses and their effect on the dimensional stability of carbon fiber reinforced polymer-matrix composites is presented. The data show that thermal residual stresses can induce damage in polymer matrix composites and significantly affect the dimensional stability of these composites by causing permanent residual strains and changes in CTE. The magnitude of these stresses is primarily controlled by the laminate configuration and the applied temperature change. The damage caused by thermal residual stresses initiates at the fiber/matrix interface and micromechanics level analyses are needed to accurately predict it. An increased understanding of fiber/matrix interface interactions appears to be the best approach for improving a composite's resistance to thermally induced damage.

Bowles, David E.↗

NASA NTRS1998

Coupling Processes between Atmospheric Chemistry and Climate

This is the third semi-annual report for NAS5-97039, covering January through June 1998. The overall objective of this project is to improve the understanding of coupling processes between atmospheric chemistry and climate. Model predictions of the future distributions of trace gases in the atmosphere constitute an important component of the input necessary for quantitative assessments of global change. We will concentrate on the changes in ozone and stratospheric sulfate aerosol, with emphasis on how ozone in the lower stratosphere would respond to natural or anthropogenic changes. The key modeling for this work are the AER 2-dimensional chemistry-transport model, the AER 2-dimensional stratospheric sulfate model, and the AER three-wave interactive model with full chemistry. We will continue developing our three-wave model so that we can help NASA determine the strengths and weaknesses of the next generation assessment models.

Ko, M. K. W.↗

NASA NTRS2000

Interannual Variability in the Equatorial Stratosphere: Comparison of 2D Model Simulations with Satellite Constituent Data

Satellite observations from UARS and TOMS have provided unique data sets for studying seasonal and interannual stratospheric constituent variability during the 1990's. The corresponding meteorological variability is also well represented by the partly satellite-based UKMO assimilation winds and temperatures. In this study, we use the UKMO meteorological fields to derive zonal mean transport components (residual circulation, horizontal eddy diffusion) for each year, 1992-1998. These fields are then used in our GSFC two-dimensional chemistry and transport model to simulate the year to year changes in ozone and long lived tracers in the equatorial stratosphere due to interannual dynamical variability. The resulting model simulation of ozone and CH4 compares reasonably well with UARS data in reproducing a dominant QBO signal in the lower stratosphere, and a dominant semiannual signature in the upper stratosphere which appears to be modulated by the lower stratospheric QBO. The model also compares well with TOMS data in simulating the phase of the QBO in total ozone, although the model QBO amplitude is somewhat underestimated relative to TOMS. These comparisons illustrate that the general zonal mean transport characteristics in the equatorial stratosphere can be reasonably well simulated using an empirically-based residual circulation.

Fleming, Eric L.↗

NASA NTRS2001

Observations of Three-Dimensional Radiative Effects that Influence Satellite Retrievals of Cloud Properties

This paper examines three-dimensional (3D) radiative effects, which arise from horizontal radiative interactions between areas that have different cloud properties. Earlier studies have argued that these effects can cause significant uncertainties in current satellite retrievals of cloud properties, because the retrievals rely on one-dimensional (1D) theory and do not consider the effects of horizontal changes in cloud properties. This study addresses two questions: which retrieved cloud properties are influenced by 3D radiative effects, and where 3D effects tend to occur? The influence of 3D effects is detected from the wayside illumination and shadowing make clouds appear asymmetric: Areas appear brighter if the cloud top surface is tilted toward, rather than away from, the Sun. The analysis of 30 images by the Moderate Resolution Imaging Spectroradiometer (MODIS) reveals that retrievals of cloud optical thickness and cloud water content are most influenced by 3D effects, whereas retrievals of cloud particle size are much less affected. The results also indicate that while 3D effects are strongest at cloud edges, cloud top variability in cloud interiors, even in overcast regions, also produces considerable 3D effects. Finally, significant 3D effects are found in a wide variety of situations, ranging from thin clouds to thick ones and from low clouds to high ones.

Varnai, Tamas↗

NASA NTRS1996

Cardiac Monitor

Under contract to Johnson Space Center, the University of Minnesota developed the concept of impedance cardiography as an alternative to thermodilution to access astronaut heart function in flight. NASA then contracted Space Labs, Inc. to construct miniature space units based on this technology. Several companies then launched their own impedance cardiography, including Renaissance Technologies, which manufactures the IQ System. The IQ System is 5 to 17 times cheaper than thermodilution, and features the signal processing technology called TFD (Time Frequency Distribution). TFD provides three- dimensional distribution of the blood circulation force signals, allowing visualization of changes in power, frequency and time.

Source record↗