Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Ashfall dispersal for the 16 September 1986, eruption of Lascar, Chile, calculated by a turbulent diffusion model

A two dimensional model for the dispersal of volcanic ash, modified from that of Suzuki (1983), is applied to the September 16, 1986 eruption of Lascar, in northern Chile. The result is an isopach map predicting ground concentrations of ash. The map shows two local maxima along distinct dispersal axes and predicts that the deposit was detached from the source. Predicted concentrations are in agreement with a single reported thickness measurement.

Glaze, Lori S.↗
NASA NTRS2001

Design and Fabrication of a Hele-Shaw Apparatus for Observing Instabilities of Diffusion Flames

Examinations of flame fronts spreading over solid fuels in an opposed flow of oxidizer have shown that the flame front fragments into smaller (cellular) flames. These 'flamelets' will oscillate, recombine, or extinguish, indicating that they are in the near extinction limit regime (i.e., to one side of the quenching branch of the flammability map). Onset of unstable cellular flamelet formation for flame spread over thin fuels occurs when a heat-sink substrate is placed a small distance from the underside of the fuel. This heat-sink substrate (or backing) displaces the quenching branch of the flammability map in a direction that causes the instabilities to occur at higher air velocities. Similar near-limit behavior has been observed in other works using different fuels, thus suggesting that these dynamic mechanisms are fuel-independent and therefore fundamental attributes of flames in this near-limit flame spread regime. The objective of this project is to determine the contributions of the hydrodynamic and thermodiffusive mechanisms to the observed formation of flame instabilities. From this, a model of diffusion flame instabilities shall be generated. Previously, experiments were conducted in NASA drop towers, thereby limiting observation time to O(1-5 sec). The NASA tests exhibited flamelet survival for the entire drop time, suggesting that flamelets (i.e., small cellular flames) might exist, if permitted, for longer time periods. By necessity, experiments were limited to thermally thin cellulose fuels (approximately 0.001 in thick): instabilities could form by virtue of faster spread rates over thin fuels. Unstable behavior was unlikely in the short drop time for thicker fuels. In the International Space Station (ISS), microgravity time is unlimited, so both thin and thick fuels can be tested.

Wichman, I. S.↗
DOE OSTI2025

Chemometrics and visible diffuse reflectance spectroscopy to classify plutonium dioxide

Diffuse reflectance (DR) spectra in the Vis-NIR (∼380–1050 nm) region were acquired for a series of PuO 2 samples with a spot size of about 10 × 10 μm. Two batches of six PuO 2 samples, synthesized approximately 7.5 months apart, were prepared using both Pu(III) and Pu(IV) oxalate precursors at three distinct calcination temperatures (450, 650, and 950 °C). This yielded a total of 12 PuO 2 samples and 433 DR spectra. The DR spectrum of PuO 2 contained numerous peaks in the visible region, and characteristic features were identified with respect to calcination temperature and chemistry. A distinct peak multiplet near 615 nm was observed for samples prepared at low calcination temperatures, and a peak near 660 nm was observed for higher calcination temperatures. A multivariate classification strategy based on principal component analysis (PCA) was developed to distinguish PuO 2 calcination temperatures of 450, 650, and 950 °C with 100 % accuracy. Classification results also indicate the potential to distinguish chemical processing history (i.e., Pu(III) or Pu(IV)) based on the spectra with 72 % accuracy based on k-nearest neighbors applied to the PCA scores. Partial least squares discriminant analysis was used to identify variation among batches with 88 % accuracy and found that peaks near 669, 681, 811, and 970 nm were the most useful for predicting the batch identity. Here, this work demonstrates how micro-diffuse reflectance spectroscopy and chemometrics can be used to classify PuO 2 processing history based on Vis-NIR spectral features. Combining the chemometric approach with mapping sequences could provide a rapid, nondestructive approach to classify Pu oxide materials for environmental, forensics, and nonproliferation applications.

Actinide↗
DOE OSTI2024

A horseshoe-shaped ring of diffuse emission detected at 1.4 GHz

We identify a horseshoe-shaped ring (HSR) of diffuse emission in J1407+0453 from the Faint Images of Radio Sky at Twenty-cm (FIRST) survey using the Very Large Array telescope at 1.4 GHz. An optical galaxy, SDSS J140709.01+045302.1, is present near the limb of the HSR of J1407+0453, with a spectroscopic redshift ofz = 0.13360. The total extent of the source, including the diffuse emission of J1407+0453, is 65 arcsec (with a physical extent of 160 kpc), whereas the diameter of the HSR is approximately 10 arcsec (25 kpc). The flux density of the HSR is ∼47 mJy at 1400 MHz, whereas the flux densities of the whole diffuse emission of J1407+0453 at 1400 MHz and 150 MHz are 172 mJy and 763 mJy, respectively. We measure the radio luminosity of HSR J1407+0453 as 1.94 × 10 24 W Hz −1 , with a spectral index,α 150 1400 = −0.67. The black hole mass of J1407+0453 is 5.8 × 10 8 M ⊙ . We compare the HSR of diffuse emission of J1407+0453 with other discovered diffuse circular sources. The possible formation scenarios for J1407+0453 are discussed, so as to understand the nature of the source. We present a spectral index map of source J147+0453 to study the spectral properties of the source.

Astronomy & Astrophysics↗
NASA NTRS1975

Interdisciplinary study of atmospheric processes and constituents of the mid-Atlantic coastal region.

Past research projects for the year 1974-1975 are listed along with future research programs in the area of air pollution control, remote sensor analysis of smoke plumes, the biosphere component, and field experiments. A detailed budget analysis is presented. Attachments are included on the following topics: mapping forest vegetation with ERTS-1 MSS data and automatic data processing techniques, and use of LARS system for the quantitative determination of smoke plume lateral diffusion coefficients from ERTS images of Virginia.

Kindle, E. C.↗
NASA NTRS1980

Measurements of the cosmic background radiation

Measurements of the attributes of the 2.7-K microwave background radiation (CBR) are reviewed, with emphasis on the analytic phase of CBR studies. Methods for the direct measurement of the CBR spectrum are discussed; attention is given to receivers, antennas, absolute receiver calibration, atmospheric emission and absorption, the galactic background contribution, the analysis of LF measurements, and recent HF observations of the CBR spectrum. Measurements of the large-angular-scale intensity distribution of the CBR (the most convincing evidence that the radiation is of cosmological origin) are examined, along with limits on the linear polarization of the CBR. A description is given of the NASA-sponsored Cosmic Background Explorer (COBE) satellite mission. The results of the COBE mission will be a set of sky maps showing, in the wave number range from 1 to 10,000 kaysers, the galactic background radiation due to synchrotron emission from galactic cosmic rays, to diffuse thermal emission from H II regions, and to diffuse thermal emission from interstellar and interplanetary dust, as well as a residue consisting of the CBR and whatever other cosmological background might exist.

Weiss, R.↗
NASA NTRS1989

Measurements of turbulence and its evolution and variability during MAP

The understanding of turbulence in the middle atmosphere has improved considerably during the MAP period. For a theoretical viewpoint, several advances were made including understanding the ways in which turbulence is generated, and the differences between the rates of diffusion of momentum and heat. Experimentally, a proper understanding of how radars can be used to measure turbulence has emerged, and turbulent energy dissipation rates in the middle atmosphere were measured with MF, HF, and VHF radars. New rocket techniques were developed which have enabled detailed studies of the fine structure of turbulence to be made. While some discrepancies between techniques still exist, these will undoubtedly be resolved soon, and these different techniques are already providing a great improvement in the understanding of turbulence on a global scale.

Hocking, W. K.↗
NASA NTRS2000

Heavy Element Abundances in NGC 5846

In this paper we analyze the diffuse X-ray coronae surrounding the elliptical galaxy NGC 5846, combining measurements from two observatories, ROSAT and the Advanced Satellite for Cosmology and Astrophysics. We map the gas temperature distribution and find a central cool region within an approximately isothermal gas halo extending to a radius of about 50 kpc and evidence for a temperature decrease at larger radii. With a radially falling temperature profile, the total mass converges to (9.6 +/- 1.0) x 10(exp 12) solar mass at 230 kpc radius. This corresponds to a total mass to blue light ratio of 53 +/- 5 solar mass/solar luminosity. As in other early type galaxies, the gas mass is only a few percent of the total mass. Using the spectroscopic measurements, we also derive radial distributions for the heavy elements silicon and iron and find that the abundances of both decrease with galaxy radius. The mass ratio of Si to Fe lies between the theoretical predictions for element production in SN Ia and SN II, suggesting an important role for SN Ia, as well as SN II, for gas enrichment in ellipticals. Using the 2 SN la yield of Si, we set an upper limit of 0.012 h(sup 2, sub 50) solar neutrino units (SNU) for the SN Ia rate at radii >50 kpc, which is independent of possible uncertainties in the iron L-shell modeling. We compare our observations with the theoretical predictions for the chemical evolution of ellipticals. We conclude that the metal content in stars, if explained by the star formation duration, requires a significant decline in the duration of star formation with galaxy radius, ranging from 1 Gyr at the center to 0.01 Gyr at 100 kpc radius. Alternatively, the decline in metallicity with galaxy radius may be caused by a similar drop with radius in the efficiency of star formation. Based on the Si and Fe measurements presented in this paper, we conclude that the latter scenario is preferred unless a dependence of the SN Ia rate on stellar metallicity is invoked.

Jones, Christine↗
NASA NTRS2018

Solar Wind Implantation Into the Lunar Regolith: Monte Carlo Simulations of H Retention in a Surface With Defects and the H2 Exosphere

The solar wind implants protons into the top 20–30 nm of lunar regolith grains, and the implanted hydrogen will diffuse out of the regolith but also interact with oxygen in the regolith oxides. We apply a statistical approach to estimate the diffusion of hydrogen in the regolith hindered by forming temporary bonds with regolith oxygen atoms. A Monte Carlo simulation was used to track the temporal evolution of bound OH surface content and the H2 exosphere. The model results are consistent with the interpretation of the Chandrayaan‐1 M3 observations of infrared absorption spectra by surface hydroxyls as discussed in Li and Milliken (2017, https://doi.org/10.1126/sciadv.1701471). The model reproduced the latitudinal concentration of OH by using a Gaussian energy distribution of f(U(sub 0) = 0.5 eV, U(sub W) = 0.078–0.1 eV) to characterize the activation energy barrier to the diffusion of hydrogen in space weathered regolith. In addition, the model results of the exospheric content of H2 are consistent with observations by the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter. Therefore, we provide support for hydroxyl formation by chemically trapped solar wind protons.

Tucker, O. J.↗
NASA NTRS2018

Solar Wind Implantation Into the Lunar Regolith: Monte Carlo Simulations of H Retention in a Surface With Defects and the H2 Exosphere

The solar wind implants protons into the top 20–30 nm of lunar regolith grains, and the implanted hydrogen will diffuse out of the regolith but also interact with oxygen in the regolith oxides. We apply a statistical approach to estimate the diffusion of hydrogen in the regolith hindered by forming temporary bonds with regolith oxygen atoms. A Monte Carlo simulation was used to track the temporal evolution of bound OH surface content and the H2 exosphere. The model results are consistent with the interpretation of the Chandrayaan-1 M3 observations of infrared absorption spectra by surface hydroxyls as discussed in Li and Milliken (2017). Themodel reproduced the latitudinal concentration of OH by using a Gaussian energy distribution of f(U(o) = 0.5eV, U(w) = 0.078 – 0.1 eV) to characterize the activation energy barrier to the diffusion of hydrogen in space weathered regolith. In addition, the model results of the exospheric content of H2 are consistent with observations by the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter. Therefore, we provide support for hydroxyl formation by chemically trapped solar wind protons.

O. J. Tucker↗
NASA NTRS2018

Solar Wind Implantation Into the Lunar Regolith: Monte Carlo Simulations of H Retention in a Surface With Defects and the H2 Exosphere

The solar wind implants protons into the top 20–30 nm of lunar regolith grains, and the implanted hydrogen will diffuse out of the regolith but also interact with oxygen in the regolith oxides. We apply a statistical approach to estimate the diffusion of hydrogen in the regolith hindered by forming temporary bonds with regolith oxygen atoms. A Monte Carlo simulation was used to track the temporal evolution of bound OH surface content and the H2 exosphere. The model results are consistent with the interpretation of the Chandrayaan‐1 M3 observations of infrared absorption spectra by surface hydroxyls as discussed in Li and Milliken (2017, https://doi.org/10.1126/sciadv.1701471). The model reproduced the latitudinal concentration of OH by using a Gaussian energy distribution of f(U0 = 0.5 eV, UW = 0.078–0.1 eV) to characterize the activation energy barrier to the diffusion of hydrogen in space weathered regolith. In addition, the model results of the exospheric content of H2 are consistent with observations by the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter. Therefore, we provide support for hydroxyl formation by chemically trapped solar wind protons.

O J Tucker↗
DOE OSTI2020

Multigrid Algorithms with Projection and Prolongation over Elements of the Phase Space for K-Eigenvalue Transport Problems

This paper describes new multilevel acceleration methods for solving the multigroup neu- tron transport eigenvalue problems. These multilevel algorithms use different projection and prolongation operators in the phase space. The Nonlinear Diffusion Acceleration (NDA) method with multiple grids in energy is formulated with the prolongation oper- ator based on multiplication iterative correction and linear-in-energy mapping. Another multilevel NDA method uses the projection operator with coarsening in energy between the high-order transport and low-order NDA equations. The third algorithm is formu- lated with the partial-current based CMFD low-order equations and applies projection operators in space and energy. The numerical results are presented.

Cornejo, Luke↗
DOE OSTI2021

An efficient reconstruction algorithm for diffusion on triangular grids using the nodal discontinuous Galerkin method

High-energy-density (HED) hydrodynamics studies such as those relevant to inertial confinement fusion and astrophysics require highly disparate densities, temperatures, viscosities, and other diffusion parameters over relatively short spatial scales. This presents a challenge for high-order accurate methods to effectively resolve the hydrodynamics at these scales, particularly in the presence of highly disparate diffusion. A significant volume of engineering and physics applications use an unstructured discontinuous Galerkin (DG) method developed based on the finite element mesh generation and algorithmic framework. This work discusses the application of an affine reconstructed nodal DG method for unstructured grids of triangles. Solving the diffusion terms in the DG method is non-trivial due to the solution representations being piecewise continuous. Hence, the diffusive flux is not defined on the interface of elements. The proposed numerical approach reconstructs a smooth solution in a parallelogram that is enclosed by the quadrilateral formed by two adjacent triangle elements. The interface between these two triangles is the diagonal of the enclosed parallelogram. Similar to triangles, the mapping of parallelograms from a physical domain to a reference domain is an affine mapping, which is necessary for an accurate and efficient implementation of the numerical algorithm. Thus, all computations can still be performed on the reference domain, which promotes efficiency in computation and storage. This reconstruction does not make assumptions on choice of polynomial basis. Reconstructed DG algorithms have previously been developed for modal implementations of the convection–diffusion equations. However, to the best of the authors’ knowledge, this is the first practical guideline that has been proposed for applying the reconstructed algorithm on a nodal discontinuous Galerkin method with a focus on accuracy and efficiency. As a result, the algorithm is demonstrated on a number of benchmark cases as well as a challenging substantive problem in HED hydrodynamics with highly disparate diffusion parameters.

Computational efficiency↗
NASA NTRS1990

Infrared and radio measurements of the density structure of compact H II regions

The density structure of compact H II regions is studied by comparing the ratio of the S III forbidden 33.47-micron and 18.71-micron emission lines and 5-GHz continuum maps. Electron densities are computed for DR 22, G29.9 - 0.0, G75.84 + 0.4, M8, M42, S158, W3, and W33. For DR 22, M42, and W3, the electron densities determined from the IR data are consistent with those derived from radio observations. The densities for S158 and M8 are quite low, implying that the S III emission is dominated by the diffuse ionized gas observed in the radio continuum. For G29.9 - 0.0, G75.84 + 0.4, and W33, the S III data give higher densities than predicted from radio observations. This implies that either these nebulae are filled with dense clumps of ionized gas which are not resolved in the radio maps, or that the S III zone is confined to the small, dense cores found in the radio maps of all three nebulae.

Megeath, S. T.↗
DOE OSTI2024

Electric field enhanced diffusion welding of alloy 617: Microstructural characteristics and mechanical properties

This study investigated the microstructural characteristics and mechanical behavior of diffusion welded nickel-based Alloy 617 obtained by electric field-assisted sintering (EFAS) using various parameters. The interfacial microstructure exhibited different characteristics including good grain boundary (GB) migration across the interface in the samples diffusion-welded at 1100 °C and a flat interface in the samples joined at 1000 °C and 1050 °C. The interface consisted of fine Al 2 O 3 oxides, while precipitation of interfacial M 23 C 6 carbides was not observed. Grain boundaries migrated across the Al 2 O 3 oxides, leaving these oxides within the grains. Graded grain size was observed, with grain coarsening being more significant near the sample surface due to the temperature gradient induced by EFAS. Tensile testing revealed that the specimens fractured in the matrix away from the interface, indicting strong diffusion-welded joints. Further, the peak tensile strength of 807 MPa was obtained in the samples welded at 1000 °C due to minimal grain growth. The materials obtained at 1100 °C exhibited reduced tensile strength but improved ductility. Strain maps revealed by digital image correlation showed alternating high and low strain segments in the samples produced at 1000 °C and 1050 °C, indicating that the flat interfaces with no GB migration were less ductile compared to the matrix. A greater strain uniformity was observed along the bond interfaces with improved GB migration. The hardness reduced near the sample surfaces due to enlarged grains induced by temperature gradient. This study demonstrates that GB migration and enhanced mechanical strength can be achieved in diffusion-welded Alloy 617.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Effect of Magnetic Islands on Neoclassical Heat Diffusivity in a Global Tokamak Simulation

Resonant magnetic perturbations (RMPs) alter magnetic field topology via island formation and can modify core transport in toroidal fusion devices. Using the global gyrokinetic particle‐in‐cell code XGC‐S, originally developed for stellarator geometries, we quantify how island topology affects neoclassical heat transport in a circular tokamak with ($m,n$) = (5,2) RMP‐induced islands. Electron radial heat diffusivity exhibits a two‐peak structure with a dominant enhancement near the O/X‐point region and a secondary peak at the outer island boundary, whereas ion transport remains close to the neoclassical prediction. The observed electron diffusivity is strongly enhanced over the neoclassical baseline but remains well below the Rechester–Rosenbluth estimate, consistent with the non‐ergodic character of the island topology. The density dependence of diffusivity is weaker inside the islands than outside, indicating the presence of topology‐driven transport channels that do not depend strongly on collisionality. Two‐dimensional heat flux maps reveal an up–down antisymmetric structure at the island separatrices consistent with magnetic gradient and curvature drift effects, in contrast to the symmetric temperature flattening inside the islands. These results identify topology‐dependent avenues for electron heat transport in RMP‐perturbed cores and suggest regimes in which island geometry, rather than collisions alone, governs radial transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A kinematic excess in the annular gap and gas-depleted cavity in the disc around HD 169142

ABSTRACT We present ALMA band 6 images of the 12CO, 13CO, and C18O J = 2-1 line emissions for the circumstellar disc around HD 169142, at ∼8 au spatial resolution. We resolve a central gas-depleted cavity, along with two independent near-symmetric ring-like structures in line emission: a well-defined inner gas ring [∼25 au] and a second relatively fainter and diffuse outer gas ring [∼65 au]. We identify a localized super-Keplerian feature or vertical flow with a magnitude of ∼75 ms−1 in the 12CO map. This feature has the shape of an arc that spans azimuthally across a position angle range of −60° to 45° and radially in between the B1[26au] and B2[59au] dust rings. Through reconstruction of the gas surface density profile, we find that the magnitude of the background perturbations by the pressure support and self-gravity terms are not significant enough to account for the kinematic excess. If of planetary origin, the relative depletion in the gas-density profile would suggest a 1 MJ planet. In contrast, the central cavity displays relatively smooth kinematics, suggesting either a low-mass companion and/or a binary orbit with a minimal vertical velocity component.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1984

Vertical displacement of the mid-tropospheric water vapor boundary in the tropics derived from the VISSR Atmospheric Sounder (VAS) 6.7-micron channel

A technique for locating areas of upward or downward motion of the upper boundary of the midtropospheric water-vapor envelope over tropical oceans on the basis of GOES Visible/IR Spin-Scan Radiometer (VISSR) Atmospheric Sounder (VAS) 6.7-micron brightness temperatures is developed and demonstrated. The technique employs an analogy to the method developed by Schoeberl and Krueger (1983) for the bottom of the ozone layer and depends on the relationship investigated by Chesters and Uccellini (1982) between 6.7-micron brightness temperature and the pressure of the water-vapor upper boundary. The results of analysis of VAS data for the North Atlantic (20-40 deg N and 35-75 deg W) on September 5-7, 1982, are presented in maps which are shown to be physically consistent and in agreement with conventional upper-air measurements. Refinement of the method to account for horizontal advection and diffusion is suggested.

Stout, J.↗