Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Effect of a simulated engine jet blowing above an arrow wing at Mach 2.0

The effects of a gas jet simulating a turbojet engine exhaust blowing above a cambered and twisted arrow wing were investigated. Tests were conducted in the Langley 4-foot supersonic pressure tunnel at a Mach number of 2.0. Nozzle pressure ratios from 1 to 64 were tested with both helium and air used as jet gases. The tests were conducted at angles of attack from -2 deg to 8 deg at a Reynolds number of 9,840,000 per meter. Only the forces and moments on the wing were measured. Results of the investigation indicated that the jet blowing over the wing caused reductions in maximum lift-drag ratio of about 4 percent for helium and 6 percent for air at their respective design nozzle pressure ratios, relative to jet-off data. Moderate changes in the longitudinal, vertical, or angular positions of the jet relative to the wing had little effect on the wing aerodynamic characteristics.

Shrout, B. L.↗
NASA NTRS1977

Present and future operational NOAA satellite oceanographic products: An introduction

A review of operational satellite-derived National Oceanic and Atmospheric Administration/National Environment Satellite Service oceanographic products is presented and some current applications of these products are noted. Recent improvements to procedures used in deriving sea surface temperature observations and fields are described. Changes to data reduction techniques and products which will be incorporated with the advent of TIROS-N are outlined and some potential future developments are mentioned.

Kalinowski, J. K.↗
NASA NTRS1978

A comparison of cloud motion winds from ATS 6 images with coinciding SMS 1 winds

A methodology is developed for accurate measurement of cloud motion winds from the geosynchronous ATS 6 image data. Attitude changes between consecutive images (as a function of scan-line number) are accounted for in wind computations through measurement of the earth-edge displacements between the successive infrared images. Also, an image matching procedure is used to remove obvious and distracting image distortions. The availability of SMS imagery coinciding with ATS 6 imagery makes SMS an excellent reference against which the quality of ATS 6 winds can be tested. The resulting winds inferred from cloud displacement measurements taken from a sequence of the corrected images are found to agree better than 2 m/sec rms with winds measured from coincident SMS 1 imagery.

Kuhlow, W. W.↗
NASA NTRS1980

Coding for spread spectrum packet radios

Packet radios are often expected to operate in a radio communication network environment where there tends to be man made interference signals. To combat such interference, spread spectrum waveforms are being considered for some applications. The use of convolutional coding with Viterbi decoding to further improve the performance of spread spectrum packet radios is examined. At 0.00001 bit error rates, improvements in performance of 4 db to 5 db can easily be achieved with such coding without any change in data rate nor spread spectrum bandwidth. This coding gain is more dramatic in an interference environment.

Omura, J. K.↗
NASA NTRS1981

Comparisons of global ozone trends inferred from the BUV experiment on Nimbus 4 and the ground-based network

Preliminary comparisons between global ozone burdens derived from the backscattered ultraviolet (BUV) experiment on Nimbus 4 and those inferred from an analysis of ground-based network data seem to indicate significant differences in the inter-annual variability of ozone. Some of the observed differences may be due to improper weighting of the ground-based network data, slowly changing planetary wave structure over the fixed station, of small inter-annual changes in meridional transport parameters. There is also some evidence which indicates that the polar stratosphere at high latitudes may represent an important ozone storage resevoir which tends to compensate for large scale changes observed in the regions outside of the polar stratosphere. Possible consequences of this are that the global trends derived from ground based ozone measurements may not be valid and furthermore that the current satellite techniques by themselves may be sufficient. An ozone monitoring system which includes observations from satellites, ground-based stations, balloons and rockets may be necessary.

Heath, D. F.↗
NASA NTRS1981

Ionospheric composition: The seasonal anomaly explained

The main photochemical processes of the ionosphere are reanalyzed in the light of laboratory measurements of rate coefficients, using the Atmosphere Explorer data. Major changes to the chemistry include the transfer of nearly all metastable 0(+) ions to N2(+) via charge exchange with N2. The N2(+) ions become vibrationally excited by resonant fluorescence of solar near UV and near infrared radiation, leading to a return transfer of N2(+) ionization to 0(+) by charge exchange or vibrationally excited N2(+) with atomic oxygen. With this chemistry the seasonal variations in the peak electron densities are then shown to be caused primarily by anomalous seasonal variations in neutral composition. The required neutral composition variations are empirically produced by the MSIS model atmosphere. The circulation derived from recent 3D models of the global thermosphere qualitatively accounts for the seasonal variations in neutral composition predicted by the MSIS model. In addition to the composition effect, vibrationally excited N2 is found to contribute a 20% effect to the anomalous seasonal behavior at solar maximum.

Torr, D. G.↗
NASA NTRS1982

Evaluation of temporal registration of Landsat scenes

The registration of Landsat images is important for multitemporal classification and for detecting change. Landsat data are now rectified to a ground coordinate system during preprocessing, hence scenes obtained over the same area are registered. The machine responsible for preprocessing the Landsat multispectral scanner data is the master data processor (MDP). This paper describes the rectification approach taken by the MDP, reviews the accuracy standards of the resultant product, and provides an assessment of the accuracy of the scene to scene registration of two Landsat images.

Nelson, R.↗
NASA NTRS1982

Sulfur chemistry in dense interstellar clouds

A model is presented for the gas phase chemistry of molecules containing sulfur in dense interstellar clouds. The sulfur chemistry is different from that used in previous models as a result of an extensive search of the recent literature and the availability of new laboratory data. The changes have a significant effect on the calculated abundance of sulfur compounds. The linked chemistry of sulfur and oxygen in the present model requires a severe depletion of sulfur and low fractional abundances of both O and O2 in the dense clouds. In contrast, the high abundance of SO and the low abundance of CS relative to SO in the HVS in the KL may indicate an oxygen-rich, high temperature environment compared to OMC-1. The formation of S-H bonds is slow because of the absence of radiative association between S(+) and H2. The present model underestimates the abundance of H2S unless a radiative association reaction between HS(+) and H2 is postulated.

Prasad, S. S.↗
NASA NTRS1984

Use of shape-preserving interpolation methods in surface modeling

In many large-scale scientific computations, it is necessary to use surface models based on information provided at only a finite number of points (rather than determined everywhere via an analytic formula). As an example, an equation of state (EOS) table may provide values of pressure as a function of temperature and density for a particular material. These values, while known quite accurately, are typically known only on a rectangular (but generally quite nonuniform) mesh in (T,d)-space. Thus interpolation methods are necessary to completely determine the EOS surface. The most primitive EOS interpolation scheme is bilinear interpolation. This has the advantages of depending only on local information, so that changes in data remote from a mesh element have no effect on the surface over the element, and of preserving shape information, such as monotonicity. Most scientific calculations, however, require greater smoothness. Standard higher-order interpolation schemes, such as Coons patches or bicubic splines, while providing the requisite smoothness, tend to produce surfaces that are not physically reasonable. This means that the interpolant may have bumps or wiggles that are not supported by the data. The mathematical quantification of ideas such as physically reasonable and visually pleasing is examined.

Ftitsch, F. N.↗
NASA NTRS1986

Image Interpolation With Dedicated Digital Hardware

Algorithm for interpolating two-dimensional image data to change picture-element spacing implemented in dedicated digital hardware for high-speed execution. System interpolates 100 times as fast as generalpurpose computer. Image resampling occurs first along one image axis and then along other, using two interpolation devices implemented in series.

Hartenstein, R.↗
NASA NTRS1984

Magnetospheric pulsations observed by ISEE 1 and 2 satellites

The ISEE 1 and 2 spacecraft studied whether observed amplitude variations in hydromagnetic waves were due to the motion of the spacecraft through a time stationary structure or were due to temporal changes. The data provide evidence for spatially limited standing hydromagnetic wave resonant regions. The standing wave harmonic and Poynting vector were deduced from the simultaneous observations of the wave magnetic and electric field.

Singer, H. J.↗
NASA NTRS1984

Results of an irrigated lands assessment for water management in California

Periodic assessment of existing and future demands for water within California is one responsibility of the California Department of Water Resources (CDWR). The California Irrigated Lands Assessment for Water Management Project represented a 5-year joint research effort between the NASA and the CDWR with technical support from the University of California (UC) at Berkeley and at Santa Barbara. The objectives were: (1) to develop and demonstrate procedures for providing highly precise, timely, estimates of irrigated area on a statewide basis using Landsat sensor data, and (2) to develop, through research with small demonstration sites, a procedure for the inventory and mapping of crop groups on a regional basis. Both manual and computer-assisted analyses were investigated. This paper highlights the statewide irrigated lands inventory where a procedure for statewide estimation of irrigated land using full frame Landsat MSS imagery and sampled ground data was successfully demonstrated. The statewide estimate of 3 990 112 hectares was within + or - 1.32 percent relative standard error at the 95-percent Confidence Interval, well within the design goal. This procedure represents a new capability for obtaining near-real time data on changes in agricultural water use throughout the state.

Bauer, E. H.↗
NASA NTRS1985

Role of carbonic anhydrase in bone - Partial inhibition of disuse atrophy of bone by parenteral acetazolamide

The effectiveness of orally and subcutaneously administered acetazolamide sodium in preventing denervation-induced bone loss in rats is examined. Male Sprague-Dawley rats were treated with acetazolamide either orally by incorporation of 0.2, 0.5, or 1.5 percent concentrations in their diet for 15 days, or subcutaneously by either injection of 0.5 ml/rat of a solution containing either 20 or 100 mg/ml of the drug twice daily for 15 days or by continuous infusion of 5, 50, 500, or 1000 mg/ml of acetazolamide sodium for 8 days using an osmotic minipump. The effects of acetazolamide on body weight, food consumption, and plasma calcium content are evaluated. It is observed that parenteral administration is equally effective as oral administration in partially preventing denervation-induced bone mass changes. The data reveal that approximately 50 percent protection occurs with daily doses of 1094, 129, and 8 mg/kg body weight for the oral, subcutaneous injection, and subcutaneous infusion methods, respectively.

Kenny, A. D.↗
NASA NTRS1986

Illustration of the use of modal assurance criterion to detect structural changes in an Orbiter test specimen

The analysis of empirical modal models of structural components using techniques based on the modal assurance criterion (MAC) defined by Ewins (1984) is discussed and demonstrated for the case of the Space Shuttle Orbiter aft bulkhead. Modal models of the bulkhead are constructed before and after environmental acoustic tests equivalent to 30 or 100 missions and compared (by computing their MACs) to detect significant structural changes; subdivision of the modal vector followed by computation of the MAC for each part is used to localize the changes. Numerical data demonstrating the usefulness of the MAC approach are presented in tables and diagrams.

West, Walter M.↗
NASA NTRS1987

Advanced turboprop wing installation effects measured by unsteady blade pressure and noise

A single rotation model propeller (SR-7A) was tested at simulated takeoff/approach conditions (Mach 0.2), in the NASA Lewis 9- by 15-Ft Anechoic Wind Tunnel. Both unsteady blade surface pressures and noise measurements were made for a tractor configuration with propeller/straight wing and propeller alone configurations. The angle between the wing chord and propeller axis (droop angle) was varied along with the wing angle of attack to determine the effects on noise and unsteady loading. A method was developed that uses unsteady blade pressure measurements to provide a quantitative indication of propeller inflow conditions, at least for a uniform (across the propeller disk) inflow angle. The wing installation caused a nearly uniform upwash at the propeller inlet as evidenced by the domination of the pressure spectra by the first shaft order. This inflow angle increased at a rate of almost 150 percent of that of the wing angle-of-attack for a propeller-wing spacing of 0.54 wing chords at a constant droop angle. The flyover noise, as measured by the maximum blade passing frequency level, correlates closely with the propeller inflow angle (approx. 0.6 dB per degree of inflow angle) for all droop angles and wing angles of attack tested, including the propeller alone data. Large changes in the unsteady pressure responses on the suction surface of the blade were observed as the advance ratio was varied. The presence of a leading edge vortex may explain this behavior since changes in the location of this vortex would change with loading (advance ratio).

Heidelberg, Laurence J.↗
NASA NTRS1987

Advanced turboprop wing installation effects measured by unsteady blade pressure and noise

A single rotation model propeller (SR-7A) was tested at simulated takeoff/approach conditions (Mach 0.2), in the NASA Lewis 9- by 15-Ft Anechoic Wind Tunnel. Both unsteady blade surface pressures and noise measurements were made for a tractor configuration with propeller/straight wing and propeller alone configurations. The angle between the wing chord and propeller axis (droop angle) was varied along with the wing angle of attack to determine the effects on noise and unsteady loading. A method was developed that uses unsteady blade pressure measurements to provide a quantitative indication of propeller inflow conditions, at least for a uniform (across the propeller disk) inflow angle. The wing installation caused a nearly uniform upwash at the propeller inlet as evidenced by the domination of the pressure spectra by the first shaft order. This inflow angle increased at a rate of almost 150 percent of that of the wing angle-of-attack for a propeller-wing spacing of 0.54 wing chords at a constant droop angle. The flyover noise, as measured by the maximum blade passing frequency level, correlates closely with the propeller inflow angle (approx. 0.6 dB per degree of inflow angle) for all droop angles and wing angles of attack tested, including the propeller alone data. Large changes in the unsteady pressure responses on the suction surface of the blade were observed as the advance ratio was varied. The presence of a leading edge vortex may explain this behavior since changes in the location of this vortex would change with loading (advance ratio).

Heidelberg, Laurence J.↗