Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cyclotrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electron cyclotron resonance (ECR) magnetometry with a plasma reservoir

The local magnetic field in a Penning–Malmberg trap is found by measuring the temperatures that result when electron plasmas are illuminated by microwave pulses. Multiple heating resonances are observed as the pulse frequencies are swept. The many resonances are due to electron bounce and plasma rotation sidebands. The heating peak corresponding to the cyclotron frequency resonance is identified to determine the magnetic field. A new method for quickly preparing low density electron plasmas for destructive temperature measurements enables a rapid and automated scan of microwave frequencies. This technique can determine the magnetic field to high precision, obtaining an absolute accuracy better than 1 ppm and a relative precision of 26 ppb. One important application is in situ magnetometry for antihydrogen-based tests of charge-parity-time symmetry and of the weak equivalence principle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

W-band system-on-chip electron cyclotron emission imaging system on DIII-D

Monolithic, millimeter wave “system-on-chip” (SoC) technology has been employed in heterodyne receiver integrated circuit radiometers in a newly developed Electron Cyclotron Emission Imaging (ECEI) system on the DIII-D tokamak for 2D electron temperature profile and fluctuation evolution diagnostics. Here, a prototype module operating in E-band (72-80 GHz) was first employed in a 2 x 10 element array that demonstrated significant improvements over the previous quasi-optical Schottky diode mixer arrays during the 2018 operational campaign of the DIII-D tokamak. For compatibility with International Thermonuclear Experimental Reactor (ITER) relevant scenarios on DIII-D, the SoC ECEI system was upgraded with 20 horn-waveguide receiver modules. Each individual module contains a University of California at Davis designed W-band (75 -110 GHz) receiver die that integrates a broadband low noise amplifier (LNA), a double balanced down-converting mixer, and a x4 multiplier on the local oscillator (LO) chain. A x2 multiplier and two IF amplifiers are packaged and selected to further boost the signal strength as well as downconvert the signal frequency. The upgraded W-band array exhibits > 30 dB additional gain and 20x improvement in noise temperature comparing with the previous Schottky diode radio frequency (RF) mixer input systems; an internal 8 times multiplier chain is used to bring down the LO frequency below 12 GHz, thereby obviating the need for a large aperture for quasi-optical LO coupling and replacing it with coaxial connectors. The horn-waveguide shielding housing avoids out-of-band noise interference on each individual module. The upgraded ECEI system plays an important role for absolute electron temperature evolution and fluctuation measurements for edge and core region transport physics studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Upgrades to the ion cyclotron emission diagnostic on the DIII-D tokamak

The ion cyclotron emission diagnostic on the DIII-D tokamak comprises seven single-turn loops that measure high-frequency (1–100 MHz) magnetic field fluctuations that are often excited by energetic particles in the plasma. The raw voltage signals induced in the loops in response to these fluctuations travel through a series of cables, isolation transformer DC blocks, low-pass filters, and finally a digitizer before being analyzed in frequency space. The diagnostic has been recently upgraded, most notably to include four additional graphite tile loops and a new eight-channel digitizer. The previous three loops are all on the low-field side of the tokamak. The measurement capabilities of the system have been expanded by the addition of a new horizontally oriented loop on the low-field side, an additional toroidal loop on the low-field side, and two toroidal loops on the high-field side. These loops will be used to provide approximate mode polarization, improved toroidal mode number calculations, and information on modes in inward-shifted plasmas, respectively.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Diagnosing the pedestal magnetic field and magnetohydrodynamics radial structure with pedestal–scrape of layer electron cyclotron emission radiation inversion in H-mode plasma (invited)

Forward modeling is used to interpret inversion patterns of the pedestal–Scrape of Layer (SOL) Electron Cyclotron Emission (ECE) in DIII-D H-mode experiments. The modeling not only significantly improves the ECE data interpretation quality but also leads to the potential measurements of (1) the magnetic field strength |B| at the separatrix, (2) the pedestal |B| evolution during an inter-Edge Localized Mode (ELM) period, and (3) the pedestal Magnetohydrodynamics (MHD) radial structure. The ECE shine-through effect leads to three types of pedestal–SOL radiation inversions that are discussed in this paper. The first type of inversion is the non-monotonic T e,rad profile with respect to the major radius. Using the ECE frequency at the minimum T e,rad , the inversion can be applied to measure the magnetic field |B| at the separatrix and calibrate the mapping of the ECE channels with respect to the separatrix. The second type of inversion refers to the opposite phase between the radiation fluctuations δT e,rad at the pedestal and SOL. This δT e,rad phase inversion is sensitive to density and temperature fluctuations at the pedestal foot and, thus, can be used to qualitatively measure the MHD radial structure. The third type of inversion appears when the pedestal and SOL T e,rad evolve in an opposite trend, which can be used to infer the pedestal |B| field change during an inter-ELM period. Finally, the bandwidth effect on measuring δT e,rad due to pedestal MHD is also investigated in the radiation modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Pockels cell enabled heterodyne phase contrast imaging diagnostic for detection of ion cyclotron emission

This work describes a novel optical heterodyne detection scheme that significantly extends the frequency response of the phase contrast imaging method to detect electron density fluctuations in tens of megahertz frequency range. The system employs a variable frequency electro-optic modulator to allow operation at any frequency in the range 10–40 MHz without the need to realign the system. The frequency coverage of the system makes it suitable to measure the radial structure of the electron density component of ion cyclotron emission on devices having confining magnetic field of a few tesla, thus extending the purely temporal measurements provided so far by magnetic probes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Design of an electron cyclotron emission diagnostics suite for COMPASS Upgrade tokamak

COMPASS Upgrade is a medium size and high field tokamak that is capable of addressing key challenges for reactor grade tokamaks, including power exhaust and advanced confinement scenarios. Electron cyclotron emission will be available among the first diagnostics to provide measurements of high spatial and temporal resolution of electron temperature profiles and electron temperature fluctuation profiles through a radial view. A separate oblique view at 12° from normal will be utilized to study non-thermal electrons. Both the radial and oblique views are envisioned to be located in a wide-angle midplane port, which has dimensions that enable simultaneous hosting of the front-end of their quasi-optical (QO) designs. Each QO design will have an in situ hot calibration source in the front-end to provide standalone and calibrated Te (R,t) measurements. The conceptual design for each QO system, the Gaussian beam analysis, and the details of the diagnostic channels are presented.

Instruments & Instrumentation↗
DOE OSTI2023

Three-dimensional coupling of electron cyclotron drift instability and ion–ion two stream instability

Electron cyclotron drift instability (ECDI) and ion–ion two stream instability (IITSI) are both kinetic instabilities that can be present in low-temperature, partially magnetized plasmas. The coupling of instabilities in a three-dimensional configuration leads to the existence of more than one unstable roots to the kinetic dispersion relation. In this paper, a generalized method has been developed for numerically evaluating solutions to the three-dimensional dispersion relation for coupled ECDI and IITSI, assuming cold singly and doubly charged ions and a Maxwellian velocity distribution function for the electrons. The present study demonstrates the coupling between ECDI and IITSI that affects the most unstable mode as a function of the wavenumbers in three dimensions and various plasma properties, including the applied electric field, magnetic field, electron temperature, ion velocities, and plasma density. One of the most notable results is that, while the most unstable mode with the largest growth rate is in the direction of the E×B drift in the two-dimensional cases, the most unstable mode for the three-dimensional configuration occurs in the oblique direction between the applied electric field and the E×B drift. Here, this agrees with experimental observations in cross field plasma sources using coherent Thomson scattering.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Electron cyclotron emission quasi-optical transmission system on the HL-3 tokamak

A new quasi-optical (QO) Electron Cyclotron Emission (ECE) transmission system has been established on the HL-3 tokamak, which includes a focusing QO mirror combination and a long-distance transmission line. This system was developed to meet the requirements for poloidal spatial resolution and the high signal-to-noise ratio needed for magnetohydrodynamic (MHD) instability studies using ECE on the HL-3. The QO mirror combination was installed inside the vacuum chamber for focusing. Laboratory test results, theoretical calculations, and synthetic ECE simulation results indicate that the Gaussian beam can meet the spatial resolution requirements for the accurate measurement of the MHD instability on the q = 1/2/3 surfaces, corresponding to the poloidal mode numbers m = 3/6/9. This includes good diagnostic poloidal spatial resolution for the important 2/1 and 3/2 modes. At the front end of the transmission line, a high-efficiency mode converter was designed to transition the TE 10 mode to the HE 11 mode for input into the transmission line, with an insertion loss of less than 1.5 dB. A 30 m long-distance corrugated oversized waveguide was constructed, with transmission losses ranging from 6 to 10 dB in the 60–120 GHz range. Polarization adjustment results show that the polarization offset and geometric spatial polarization angle change consistently, which can provide a reference for polarization adjustment in other complex structured transmission lines. As a result, the newly established ECE QO transmission system will provide strong support for future physics research involving ECE on the HL-3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Demagnetization analysis of an 18 GHz electron cyclotron resonance ion source permanent magnet hexapole

An upgrade of ECR2 at the Argonne Tandem Linac Accelerator System is under way, focusing on increasing the intensity capabilities of the facility. ECR2 is a room temperature electron cyclotron resonance ion source, and the upgrade has strict requirements to retain radial access to the plasma chamber and keep the ion source operating without the use of superconducting magnets. The upgrade design with respect to the magnet arrangement and magnetization vectors has recently been presented [R. C. Vondrasek, J. McLain, and R. H. Scott, J. Phys.: Conf. Ser. 2743 , 012044 (2024)] using the same magnetic material as the current ECR2 hexapole. A thorough exploration of the demagnetization potential of this hexapole was carried out, and the risk of demagnetization was deemed too high, despite the magnetic performance meeting the requirements for the upgrade. Additional permanent magnet materials are considered with their respective performance evaluated. Magnet strength and demagnetization resistance are investigated and optimized with the final room temperature design demonstrating a high temperature transient demagnetization resistance and a radial magnetic field of 1.18 T at the plasma chamber wall. Finally, the simulations of this hexapole suggest that it will be sufficient to optimize intensity with a 14.5 GHz driving frequency and will allow 18 GHz operation, while keeping a high safety margin for maintaining magnet performance.

Argonne Tandem Linac Accelerator System↗
DOE OSTI2025

Propagation of ion cyclotron emission in the DIII-D tokamak

Experiments in L- and H-mode plasmas performed on the DIII-D tokamak explored ion cyclotron emission (ICE) propagation via the recently upgraded ICE diagnostic. The distance between the plasma and the outer wall was scanned to alter the evanescent region, which was seen to impact the detection of runaway electron-driven whistler modes in a comparable frequency range to typical ICE harmonics (f≳10fci) [Heidbrink et al., Plasma Phys. Controlled Fusion 61, 014007 (2018)]. In L-mode plasmas, core ICE did not exhibit clear trends as the plasma-wall distance was altered. Instead, inadvertent changes to the fast ion density correlated with different ICE fine structures; the most spectral bands (spaced ∼150–200 kHz apart) were observed at the highest fast ion density, and a just single band when nfast decreased by ∼ 40%. The full-wave Petra-M code simulated core ICE propagation through the plasma and to ICE probes, agreeing with experimental findings that these are likely compressional fast waves, which propagate to probe locations with no dependence on plasma-wall gap. Edge ICE in H-mode plasmas was similarly unaffected by plasma-wall distance. Unlike in core ICE cases, there were negligible changes to the edge fast ion distribution and edge bulk plasma profiles. However, changes in ELM frequency seemed most closely tied to ICE behavior. Ultimately, core and edge ICE did not exhibit clear dependencies on the plasma-wall distance, and ICE harmonics were observed with even the largest plasma-wall gaps. This independence bodes well for similar diagnostics in future tokamaks, which might be placed further from high radiation areas without adversely impacting measurement capabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

THz cyclotron resonance of a 2D hole gas in a GaN/AlN heterostructure

The recent discovery of highly conducting two-dimensional hole gases (2DHGs) in GaN/AlN heterojunctions has opened the door to efficient complementary GaN electronics, a long-standing challenge in wide-bandgap semiconductor device physics. Electrical transport studies and simulations indicate that both heavy- and light-hole valence bands are occupied in these 2DHGs, but direct experimental characterization of the fundamental parameters of the mobile holes remains at an early stage. Here, we use time-domain terahertz spectroscopy and pulsed magnetic fields up to 31 T to directly measure cyclotron resonance of the mobile 2D holes in these GaN-based 2DHGs at low temperature (8 K), revealing key material properties including effective masses, densities, scattering times, and mobilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Noise suppression for MHD characterization with electron cyclotron emission imaging 1D technique

Significant noise suppression for magnetohydrodynamics (MHD) mode characterization in the spatial and spectral domain is achieved by processing two-dimensional (2D) electron cyclotron emission imaging (ECEI) data with a one-dimensional (1D) ECEI technique using a short time window ($1\;{\text{ms}}$). The technique is applied to detect toroidal Alfven eigenmodes (TAEs) in the temporal spectrum and fit their radial envelope using the data from the DIII-D tokamak W-band 2D ECEI system. Using the data length (time window) of only 1 ${\text{ms}}$, the 1D ECEI can clearly detect the TAEs (~100 ${\text{kHz}}$) on the spectrum, while similar spectrum quality requires ~10 ${\text{ms}}$ data length with the cross power spectrum between two midplane ECEI channels. The 1D ECEI technique also effectively avoids biased fitting when resolving the fine structure of the TAE's radial envelope. The radially spatial resolution of 1D ECEI is constrained by the finite ECE radiation volume of the ECEI receiver. Here, with forward radiation modeling, we find the DIII-D ECEI system can sensitively measure the even parity MHD activities, for which the mode width is >15 mm, and tearing modes (odd parity MHD activities), for which the island full width is >30 mm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Power transport efficiency during O-X-B 2nd harmonic electron cyclotron heating in a helicon linear plasma device

The principal objective of this work is to report on the power coupled to a tungsten target in the prototype-material plasma exposure experiment device during oblique injection of a microwave beam (<70 kW at 28 GHz) into a high-power (~100 kW at 13.56 MHz) over-dense (${n_e} > 1 \times {10^{19}}{\text{ }}{{\text{m}}^{ - 3}}$) deuterium helicon plasma column. The experimental setup, electron heating system, electron heating scheme, and IR thermographic diagnostic for quantifying the power transport is described in detail. It is demonstrated that the power transported to the target can be effectively controlled by adjusting the magnetic field profile. Using this method, heat fluxes up to 22 MW m -2 and power transport efficiencies in the range of 17%–20% have been achieved using 70 kW of microwave power. It is observed that most of the heat flux is confined to a narrow region at the plasma periphery. Ray-tracing calculations are presented which indicate that the power is coupled to the plasma electrons via an O-X-B mode conversion process. Calculations indicate that the microwave power is absorbed in a single pass at the plasma periphery via collisions and in the over-dense region via 2nd harmonic cyclotron resonance of the electron Bernstein wave. The impact of our results is discussed in the context of MPEX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

The dual-electron cyclotron emission based measurement of 3D structures on DIII-D tokamak

The measurements of the locked mode and other 3D magnetohydrodynamic modes are essential for real-time control of plasma stability in future fusion reactors. Current magnetic measurements present non-negligible challenges for the application on fusion pilot plants (FPPs) due to neutron radiation and pose challenging design issues. In this paper, we discuss an alternative solution with microwave-based measurements. The dual-electron cyclotron emission (ECE) method has been developed and applied on DIII-D. The dual-ECE measurement method demonstrates clear identification of magnetic islands compared to single ECE, which is highly beneficial for locked mode feedback control on the FPPs. Toroidally separated ECE measurements provide accurate three-dimensional structure of magnetic islands and tearing modes. This technique also offers deeper physical insights into the penetration of resonant magnetic perturbations. Numerical calculations indicate that small locked modes (magnetic island width > 2 cm) can be detected using the dual-ECE measurement method in ITER plasma. This will enhance measurement capabilities for the safe operation of FPP plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Stability analysis of Alfvén eigenmodes excited by ion cyclotron resonance heating on EAST

Alfvén wave instabilities driven by energetic particles are common in fusion devices. Understanding their behavior is essential for the good confinement of fusion plasma. For this purpose, a series of experiments are performed on EAST to investigate the excitation of toroidal Alfvén eigenmodes (TAEs). Experimentally, it was found that AEs with frequencies around 80, 134, 157 kHz are excited by ion cyclotron resonance heating (ICRH) hydrogen minority heating scenario. Moreover, the excitation of AEs is independent of the wall-coating materials, but determined with the generation and confinement of the fast ions. Statistical analysis suggests that the TAEs can only be excited when the ICRH power is larger than 2 MW and the H 98 factor is larger than 1.15. In line with the experiments, a set of simulations using TORIC, ASCOT, and NOVA-C is performed. The simulation results show that with the experimental density profile and safety factor, the measured TAE with frequency of 134 kHz is well reproduced by taking into account the plasma toroidal rotation frequency. However, the appearance of the 80 kHz mode cannot be captured in the simulations. The ICRH-generated fast hydrogen ions mainly have banana orbits and that their perpendicular velocity is much larger than that of the parallel ions. The stability analysis with NOVA-C suggests that the radial gradient of the fast H ion distribution is the only driving source of TAEs. For TAEs locate in the center of Alfvén continuum, the D ion Landau damping is the dominant damping term; For most other TAEs which have intersections with the continuum boundary, the continuum damping becomes the dominant damping mechanism.

Alfvén eigenmodes↗
DOE OSTI2026

Edge fluctuation measurements in EDA H-mode and QCE plasmas in ASDEX Upgrade using the correlation electron cyclotron emission diagnostic

The requirement of a plasma solution without large edge-localized modes (ELMs) for future fusion devices motivates the study of plasmas without Type I ELMs. The enhanced D–α (EDA) and quasi-continuous exhaust (QCE) scenarios are two such Type I ELM free plasmas, but their underlying physics principles are not fully understood. A database of EDA and QCE plasmas from ASDEX Upgrade was compiled and analyzed using the correlation electron cyclotron emission diagnostic in order to study differences between properties of the quasi-coherent mode (QCM) between these two regimes. Investigations into measured spectral properties of the QCM, radiated temperature fluctuations δT rad /T rad , and radial correlation lengths L c showed no differences between the two regimes. Spectral properties using the cross-power spectral density, G xy were similar between regimes, with the values measured to be a central frequency, $f$ $QCM$ ≈ 20 - 50 kHz; spectral width, Δ $f$ ≈ 5 - 40 kHz; δT rad /T rad ≈ 4-6%; and L c ≈ 1-2 cm. Investigations into a quantity representing the relative bandwidth Δ$f$/$f$ $QCM$ revealed differences between EDA and QCE plasmas when plotted radially, suggesting some type of interaction between the QCM in QCE plasmas with the surrounding broadband turbulence that is not present in EDA phases. Additionally, investigations into various drive terms for hypothesized instability drivers for the QCM are performed showing no difference in the parameter spaces of collisionality and the ion temperature, electron temperature, or electron pressure scale lengths between each regime indicating that there is no observable difference between the drive behind the QCM in each regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Magnetic shear effect on plasma transport at T e / T i ~ 1 through electron cyclotron heating in DIII-D plasmas

The effect of magnetic shear on plasma transport for an electron to ion temperature ratio ( T e / T i ) near unity has been explored in DIII-D utilizing electron cyclotron heating (ECH). Previous reports showed that significant confinement degradation occurred at T e / T i ~ 1 in positive shear (PS) plasmas in DIII-D, whereas reduced confinement degradation was observed in negative central shear (NCS) plasmas. In this study, plasma transport in weak magnetic shear (WS) plasmas with ECH is investigated and compared with that in NCS and PS plasmas. Here the magnetic shears ($\hat s$) are $\hat s$ > 0.5, ~0 and <-0.1 in the core region (ρ~ 0.3–0.4) of PS, WS and NCS plasmas, respectively, and flat or negative inside ρ~ 0.4 in the WS and NCS plasmas. Weak magnetic shear is found to be effective in minimizing degradation of ion thermal confinement as T e / T i increases through ECH application, and an improved confinement factor of H 98y2 ~ 1.2 is maintained, similar to NCS plasmas. At T e / T i ~ 1, the ion thermal diffusivity around an internal transport barrier decreases when changing the magnetic shear from positive to weak or negative shear. Also, reduced local particle and momentum transport was indicated by steeper density and toroidal rotation profiles in the weak and negative shear regimes. Linear gyrokinetic simulations predict little change in growth rates of low-k turbulence with ECH application in the WS and NCS plasmas, which is consistent with the transport and profile analyses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Chirping ion cyclotron emission (ICE) on NSTX-U

In this work, we report on the discovery on NSTX-U of a qualitatively new type of non-thermal emission from plasmas in the ion-cyclotron frequency range (ICE). This new type of ICE is weakly damped, γ damp /ω ICE ≈ 0.14%, low order eigenmodes, excited by a fast ion population radially located near an internal transport barrier. The ICE appears as repetitive bursts with durations of ≈1 ms, and the bursts exhibit frequency chirps upwards and/or downwards with maximum δf/f ≈ 1%. We refer to this chirping ICE as ch-ICE. The bursts are longer than the typical ICE bursts of ≈100 μs reported previously for NSTX and NSTX-U, for simplicity, NSTX(-U). The chirping resembles that seen in modeling of weakly unstable fast particle driven instabilities (cf, Berk et al 1997 Phys. Lett. A 234 213). These data also provide some preliminary indications of non-linear coupling between the ch-ICE harmonics. Despite extensive experimental and theoretical studies of ICE, theoretical understanding of ICE remains qualitative at best. The detailed experimental observations of ICE from NSTX(-U) find a wide variation in the ICE characteristics. The new observations of ch-ICE presented here, combined with the characteristics of ICE on NSTX(-U) previously reported (Fredrickson et al 2019 Phys. Plasmas 26 032111), could guide the development of more complete theoretical models of ICE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗