Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Trailing Vortex Measurements in the Wake of a Hovering Rotor Blade with Various Tip Shapes

This work examined the wake aerodynamics of a single helicopter rotor blade with several tip shapes operating on a hover test stand. Velocity field measurements were conducted using three-component laser Doppler velocimetry (LDV). The objective of these measurements was to document the vortex velocity profiles and then extract the core properties, such as the core radius, peak swirl velocity, and axial velocity. The measured test cases covered a wide range of wake-ages and several tip shapes, including rectangular, tapered, swept, and a subwing tip. One of the primary differences shown by the change in tip shape was the wake geometry. The effect of blade taper reduced the initial peak swirl velocity by a significant fraction. It appears that this is accomplished by decreasing the vortex strength for a given blade loading. The subwing measurements showed that the interaction and merging of the subwing and primary vortices created a less coherent vortical structure. A source of vortex core instability is shown to be the ratio of the peak swirl velocity to the axial velocity deficit. The results show that if there is a turbulence producing region of the vortex structure, it will be outside of the core boundary. The LDV measurements were supported by laser light-sheet flow visualization. The results provide several benchmark test cases for future validation of theoretical vortex models, numerical free-wake models, and computational fluid dynamics results.

Martin, Preston B.↗
NASA NTRS2014

Control of NASA's Space Launch System

The flight control system for the NASA Space Launch System (SLS) employs a control architecture that evolved from Saturn, Shuttle & Ares I-X while also incorporating modern enhancements. This control system, baselined for the first unmanned launch, has been verified and successfully flight-tested on the Ares I-X rocket and an F/A-18 aircraft. The development of the launch vehicle itself came on the heels of the Space Shuttle retirement in 2011, and will deliver more payload to orbit and produce more thrust than any other vehicle, past or present, opening the way to new frontiers of space exploration as it carries the Orion crew vehicle, equipment, and experiments into new territories. The initial 70 metric ton vehicle consists of four RS-25 core stage engines from the Space Shuttle inventory, two 5- segment solid rocket boosters which are advanced versions of the Space Shuttle boosters, and a core stage that resembles the External Tank and carries the liquid propellant while also serving as the vehicle's structural backbone. Just above SLS' core stage is the Interim Cryogenic Propulsion Stage (ICPS), based upon the payload motor used by the Delta IV Evolved Expendable Launch Vehicle (EELV).

VanZwieten, Tannen S.↗
NASA NTRS1975

Microdosimetric structure of HZE particle tracks in tissue

Heavy nuclei of the primary galactic radiation in space can have the same linear energy transfer yet greatly different lateral distribution patterns of the energy in the microstructure of tissue. Track structure thus presents itself as a new dosimetric parameter for HZE particles which is at present incompletely understood in its radiobiological significance. The theory of track structure distinguishes two regions: core and penumbra. The core is a narrow region with a radius far below 1 micron in tissue where energy deposition occurs mainly through excitations and collective oscillations of electrons. Energy density in the core accounts for slightly more than half the total LET. The penumbra surrounding the core extends laterally several to many microns depending on the energy of the primary. Energy density in the penumbra decreases steeply with the square of increasing radius. The relationships are illustrated with nuclear emulsion micrographs and plots of energy density profiles. The implications of the findings for a dosimetric system for HZE particles are discussed.

Schaefer, H. J.↗
NASA NTRS1980

Comparison of calculated and measured helicopter rotor lateral flapping angles

Calculated and measured values of helicopter rotor flapping angles in forward flight are compared for a model rotor in a wind tunnel and an autogiro in gliding flight. The lateral flapping angles can be accurately predicted when a calculation of the nonuniform wake-induced velocity is used. At low advance ratios, it is also necessary to use a free wake geometry calculation. For the cases considered, the tip vortices in the rotor wake remain very close to the tip-path plane, so the calculated values of the flapping motion are sensitive to the fine details of the wake structure, specifically the viscous core radius of the tip vortices.

Johnson, W.↗
NASA NTRS1985

On the structure of the turbulent vortex

The trailing vortex generated by a lifting surface, the structure of its turbulent core and the influence of axial flow within the vortex on its initial persistence and on its subsequent decay are described. Similarity solutions of the turbulent diffusion equation are given in closed form and results are expressed in sufficiently simple terms that the influence of the lifting surface parameters on the length of persistence and the rate of decay of the vortex can be evaluated.

Roberts, L.↗
NASA NTRS1985

A systematic study of magnetic braking in low-mass binaries

A short summary is given of Rappaport et al. (1983) which described results of extending a simplified stellar evolution code covering the evolution of low-mass compact binaries. Magnetic braking is probably an important process in the evolution of such binaries (such as cataclysmic variables and low-mass X-ray sources). The initial simplified code describes the mass-losing star as an n = 3/2 polytrope and was developed to study the evolution of binaries with a secondary of low mass (between 0.01 and 0.4 solar mass) when the angular momentum losses are due to gravitational radiation. In the extended code, a composite polytrope model is used for the secondary, wherein the structure of the radiative core is described by an n = 3 polytrope and the convective envelope by an n = 3/2 polytrope.

Verbunt, F.↗
NASA NTRS1987

The Large Deployable Reflector (LDR) - Plans and progress

The program history, scientific aims, design, and projected performance of the LDR, a 20-m-primary two-stage four-mirror orbiting sub-mm/FIR astronomical observatory under NASA development, are reviewed. It is shown that the LDR would provide capabilities complementary to those of IRAS, the Kuiper Airborne Observatory, the IRTF, the Hubble Space Telescope, and the planned Space IR Telescope Facility for observations of small-scale background anisotropies, high-redshift galaxies, and objects at temperatures of a few times 10 K or lower. The current design concept is illustrated with extensive drawings, diagrams, and tables of instrument parameters. Particular attention is given to the graphite-epoxy facing and Al-honeycomb core of the primary structure, the focal-plane instruments, and outstanding technological problems.

Swanson, Paul N.↗
NASA NTRS1988

Processes for fabricating and load testing NASA scatterometer antenna assemblies

The purpose of this paper is to present the processes used to fabricate and load test the NASA Scatterometer Antenna Assemblies. The fabrication processes include layup, curing and machining of antenna components, and the bonding and assembly of the components into the final antenna configuration. The design of each antenna consists of an aluminum waveguide bonded to a sandwich structure of Nomex honeycomb core with graphite/epoxy skins. A titanium end fitting with fiberglass/epoxy transitions is bonded into one end of each antenna. Several antenna components are fabricated using a process where aluminum foil is co-cured to a composite surface. The antenna assemblies are radiographically inspected, thermally cycled, and load tested prior to shipment.

Barth, James R.↗
NASA NTRS1990

IUE and Einstein observations of the LINER galaxy NGC 4579

Results of International Ultraviolet Explorer (IUE) and Einstein observations of the LINER galaxy NGC 4579 are reported. Spatial profiles of the long wavelength IUE emission show a two component structure, with an unresolved core superimposed on broader underlying emission. The core spectrum shows strong C II lambda 2326 and broad Mg II lambda 2800 emission, and perhaps emission due to blends of Fe II multiplets (2300 to 23600 angstrom). The short wavelength emission is spatially unresolved, and shows C II lambda 1335, C III lambda 1909 broad C IV lambda 1550 emission, and a broad feature at approximately 1360 angstrom which may be due to 0.1 lambda 1356. Contrary to previous reports no evidence for He II lambda 1640 is found in the spectrum. An unresolved x ray source is detected at the location of the nucleus; its spectrum is well fitted by a power law of energy slope alpha approximately -0.5. These results further support the idea that NGC 4579 may contain a dwarf Seyfert nucleus.

Reichert, G. A.↗
NASA NTRS1985

Characterization of flow in a scroll duct

A quantitative, flow visualization study was made of a partially elliptic cross section, inward curving duct (scroll duct), with an axial outflow through a vaneless annular cutlet. The working fluid was water, with a Re(d) of 40,000 at the inlet to the scroll duct, this Reynolds number being representative of the conditions in an actual gas turbine scroll. Both still and high speed moving pictures of fluorescein dye injected into the flow and illuminated by an argon ion laser were used to document the flow. Strong secondary flow, similar to the secondary flow in a pipe bend, was found in the bottom half of the scroll within the first 180 degs of turning. The pressure field set up by the turning duct was strong enough to affect the inlet flow condition. At 90 degs downstream, the large scale secondary flow was found to be oscillatory in nature. The exit flow was nonuniform in the annular exit. By 270 degs downstream, the flow appeared unorganized with no distinctive secondary flow pattern. Large scale structures from the upstream core region appeared by 90 degs and continued through the duct to reenter at the inlet section.

Begg, E. K.↗
NASA NTRS1992

Measurements of the unsteady vortex flow over a wing-body at angle of attack

Measurements of the unsteady vortex flow over a wing-body at high angles of attack were carried out on a generic test model of a pointed body of revolution with double-delta wings. Vortex patterns and trajectories were quantified from digitized laser sheet video images. The velocity-field measurements showed the jetlike flow in the unburst vortex, unsteady secondary structures below the primary core, and then the reversed flow in the burst vortex. Results of hot-film anemometry revealed the presence of peak frequencies in the velocity spectra over the wing and near the trailing edge, which varied linearly with freestream speed and increased as the measurement point moved upstream. Good Strouhal correlation was found with previous results obtained for a smaller generic wing-body model.

Debry, Benoit↗
NASA NTRS1993

Photoluminescence intensity enhancement of GaAs by vapor-deposited GaS - A rational approach to surface passivation

A two order-of-magnitude enhancement of photoluminescence intensity relative to untreated GaAs has been observed for GaAs surfaces coated with chemical vapor-deposited GaS. The increase in photoluminescence intensity can be viewed as an effective reduction in surface recombination velocity and/or band bending. The gallium cluster (/t-Bu/GaS)4 was used as a single-source precursor for the deposition of GaS thin films. The cubane core of the structurally-characterized precursor is retained in the deposited film producing a cubic phase. Furthermore, a near-epitaxial growth is observed for the GaS passivating layer. Films were characterized by transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron and Rutherford backscattering spectroscopies.

Jenkins, Phillip P.↗
NASA NTRS1993

Research on Earth's rotation and the effect of atmospheric pressure on vertical deformation and sea level variability

The work done under NASA grant NAG5-485 included modelling the deformation of the earth caused by variations in atmospheric pressure. The amount of deformation near coasts is sensitive to the nature of the oceanic response to the pressure. The PSMSL (Permanent Service for Mean Sea Level) data suggest the response is inverted barometer at periods greater than a couple months. Green's functions were constructed to describe the perturbation of the geoid caused by atmospheric and oceanic loading and by the accompanying load-induced deformation. It was found that perturbation of up to 2 cm are possible. Ice mass balance data was used for continental glaciers to look at the glacial contributions to time-dependent changes in polar motion, the lod, the earth's gravitational field, the position of the earth's center-of-mass, and global sea level. It was found that there can be lateral, non-hydrostatic structure inside the fluid core caused by gravitational forcing from the mantle, from the inner core, or from topography at the core/mantle or inner core/outer core boundaries. The nutational and tidal response of a non-hydrostatic earth with a solid inner core was modeled. Monthly, global tide gauge data from PSMSL was used to look at the 18.6-year ocean tide, the 14-month pole tide, the oceanic response to pressure, the linear trend and inter-annual variability in the earth's gravity field, the global sea level rise, and the effects of post glacial rebound. The effects of mantle anelasticity on nutations, earth tides, and tidal variation in the lod was modeled. Results of this model can be used with Crustal Dynamics observations to look at the anelastic dissipation and dispersion at tidal periods. The effects of surface topography on various components of crustal deformation was also modeled, and numerical models were developed of post glacial rebound.

Wahr, John↗
NASA NTRS1992

Design and development of the second generation Mars Habitat

The second generation of Mars Habitat is to be utilized as an advanced permanent base for 20 crew members to live on Mars for a period of 6-12 months. It is designed to be a self-contained environment accommodating five main facilities: living, working, service, medical, and a greenhouse. The objective of the design is to create a comfortable, safe, living environment. Hexamars-2 and Lavapolis-2 are two different concepts for the advanced Mars Habitat. The design team assumes there will be an initial habitat located near or on the site from earlier missions that satisfies the requirement for a short-term habitation for the crew to use while constructing Hexamars-2 or Lavapolis-2. Prefabricated structures and materials will be shipped to the site before the long-term crew members arrive. Partial construction and preparation for the long-term habitat will be done by crew members or robotics from a previous mission. The construction of the long-term base will occur in phases. Hexamars-2 consists of six sphere-shaped inflatable modules that will be partially buried below the Martian surface. The construction of each sphere will occur in ten steps. Shape charges will be used to create the crater in which the spherical structure will be placed. The interior core will be unloaded and put into place followed by the exterior structure. The foundation will be filled, the interior bladder will be inflated, floor-to-floor joists connected, and sand pockets filled. Finally, the life support system and interior partitions are put in place. Each sphere consists of three levels of which the lower level will be safe haven. Particular attention is given to structural support, the dominance of internal pressure, the process of construction, and human factors.

Sabouni, Ikhlas↗
NASA NTRS2003

Shearography for Non-destructive Inspection with applications to BAT Mask Tile Adhesive Bonding and Specular Surface Honeycomb Panels

The applicability of shearography techniques for non-destructive evaluation in two unique application areas is examined. In the first application, shearography is used to evaluate the quality of adhesive bonds holding lead tiles to the B.4T gamma ray mask for the NASA Swift program. Using a vibration excitation, the more poorly bonded tiles are readily identifiable in the shearography image. A quantitative analysis is presented that compares the shearography results with a destructive pull test measuring the force at bond failure. The second application is to evaluate the bonding between the skin and core of a honeycomb structure with a specular (mirror-like) surface. In standard shearography techniques, the object under test must have a diffuse surface to generate the speckle patterns in laser light, which are then sheared. A novel configuration using the specular surface as a mirror to image speckles from a diffuser is presented, opening up the use of shearography to a new class of objects that could not have been examined with the traditional approach. This new technique readily identifies large scale bond failures in the panel, demonstrating the validity of this approach.

Lysak, Daniel B.↗
NASA NTRS1999

The Complex Environment of the High Excitation Planetary Nebula NGC 3242

Spatially resolved profiles of the H (alpha), [N II] 6584 A and [O III] 5007 A nebular emission lines, obtained with the Manchester echelle spectrometer combined with the 2.1 m San Pedro Martir telescope have revealed the velocity structure of the nebular core and of one of the three (A,B and C) inner haloes of the high excitation planetary nebula NGC 3242.

planetary nebulae NGC 3242 kinematics and dynamics↗