Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cohesiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Identification and quantification of multinuclear Cu active sites derived from monomeric Cu moieties for dry NO oxidation over Cu-SSZ-13

The identification and quantification of multinuclear Cu-oxo cations in Cu-zeolites is a challenge amidst the dynamic nature of Cu ions in Cu-zeolites. Herein, we synthesized Cu-SSZ-13 zeolites containing varying densities of monomeric Cu cations (Z 2 Cu and ZCuOH, where Z represents an anionic site on the zeolite framework). The number of Cu-oxo cations, quantified using carbon monoxide temperature programmed reduction (CO-TPR), quadratically increased with increasing ZCuOH density, evidencing that proximal ZCuOH sites are precursors to Cu-oxo dimers. We also find that dehydrated proximal ZCuOH with overlapping diffusion radii of at most 0.5 nm can form Cu-oxo dimers. CO-TPR also revealed the presence of three distinct pools (i.e types) of Cu-oxo dimers; these pools catalyze dry NO oxidation at different turnover rates, with the fastest pool 2 to 30 times faster than the slowest pool. Finally, from reaction kinetics and rate law analysis, we also proposed a cohesive dry NO oxidation mechanism and demonstrated that nitrates detected by in situ FTIR are a spectator species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic, magnetic, and optical properties of bulk and (1 1 1)-surfaces of CoMnZnSi quaternary Heusler alloy

The structural stability, electronic structure, and magnetic and optical properties of CoMnZnSi quaternary Heusler alloy (QHA) in the bulk and (1 1 1)-slab forms have been investigated by performing density functional theory (DFT) calculations. Formation and cohesive energies, and elastic constants confirm that the bulk CoMnZnSi is chemically and mechanically stable at an equilibrium lattice parameter of 5.81 Å. The calculated elastic constants also indicate that this QHA has ductile and anisotropic features. We investigate and discuss the bonding behavior from charge density distribution and density of states. Furthermore, these calculations in the bulk phase show a perfect half-metallic behavior with an integer value of magnetic moment (4 µB) and a large spin-flip gap of 0.39 eV. On the other hand, the Co (1 1 1) and Si (1 1 1)-slabs exhibit semi-metallic nature at the Fermi level. These results indicate that CoMnZnSi qualifies for spintronic applications. In the bulk and Co (1 1 1), Zn (1 1 1), and Si (1 1 1)-surfaces, the magnetic moment of Co and Mn atoms are ferromagnetically aligned, while the ferrimagnetic alignment of Co with Mn has been found in Mn (1 1 1)-surface. We also investigate the optimal conductivity, dielectric functions, reflectivity, absorption coefficient, refractive index, and loss function to understand the underlying optical properties of this alloy.

36 MATERIALS SCIENCE↗

Electronic and magnetic properties of iridium-based novel Heusler alloys

We report half-metallicity and magnetism including exchange splitting are the most significant physical parameters to predict and design a candidate material for spintronic applications. We report here an ab-initio investigation on chemical formation and dynamical stability along with electronic structure and magnetic properties of Ir 2 Cr (Si, Ge) and IrRhCr (Si, Ge) Heusler alloys. The negative formation and cohesive energies with positive phonon dispersions confirm the stabilities of these alloys. Electronic structure calculations reveal that Ir 2 Cr (Si, Ge) and IrRhCrSi alloys are half-metallic ferromagnets with unprecedented exchange splitting. In addition, IrRhCrGe also shows semi-metallic nature. All of these materials follow Slater Pauling rule with large magnetic moments and 100% spin-polarization. With Cr bearing the majority of the local magnetic moment and exchange splitting, a ferromagnetic state is more stable than a nonmagnetic state. The electronic charge distribution and population analysis confirm mixed ionic and covalent bonding. The magnetocrystalline anisotropy energy, with the easy magnetization along the [1 1 1] direction, is significantly high in Ir 2 CrGe. Elastic constants such as shear (G), bulk (B), Young’s moduli, and Poisson’s ratio indicate that the IrRhCrSi and IrRhCrGe alloys are mechanically stable, and Ir 2 CrSi and Ir 2 CrGe are mechanically unstable. The Pugh’s (B/G) and Poisson’s ratios confirm that the stable alloys are ductile.

36 MATERIALS SCIENCE↗

Electronic structure and magnetism of pristine, defected, and strained $\mathrm{Ti_2N}$ $\mathrm{MX}$ene

Here, from first principles electronic structure calculations, we unravel the evolution of structural, electronic, and magnetic properties of pristine, defected, and strained titanium nitride MXene with different functional groups (-F, -O, -H, and -OH). The formation and cohesive energies reveal their chemical stability. The dynamical stability of Ti 2 N mono-layer is also confirmed by phonon calculations. The MAX phase and defect free functionalized MXenes are metallic except for oxygen terminated (Ti 2 NO 2 ) one which is 100% spin polarized half-metallic ferromagnet. The spin–orbit coupling significantly influences the bare MXene (Ti 2 N) to exhibit Dirac topology and band inversion near the high symmetry directions. The strain effect sways the Fermi level thereby shifting it towards lower energy state under compression and towards higher energy state under tensile strain in Ti 2 NH 2 . The Ti 2 NO 2 exhibits exotic electronic structure not only in pristine but also in strained and defected structures. Its half-metallic nature changes to semi-metallic under 1% compression and it is completely destroyed under 2% compression. In single vacancy defect, its band structure remarkably transforms from half-metallic to semi-conducting with large band gap in 12.5% Ti, weakly semi-conducting in 5.5% Ti, and semi-metallic in 12.5% O. The 25% N defect changes its half-metallic characteristic to metallic. Further, the 12.5% Co substitution preserves its half-metallic character, whereas Mn substitution allows it to convert half-metallic characteristic into weak semi-metallic characteristic preserving ferromagnetism. However, Cr substitution converts half-metallic ferromagnetic state to half-metallic anti-ferromagnetic state. The understanding made here on collective structural stability, and electronic band structure, and magnetic phenomena in novel 2D Ti 2 N derived MXenes open up their possibility in designing them for synthesis.

36 MATERIALS SCIENCE↗

Integrated simulation, machine learning, and experimental approach to characterizing fracture instability in indentation pillar-splitting of materials

Measuring fracture toughness of materials at small scales remains challenging due to limited experimental testing configurations. A recently developed indentation pillar-splitting method has shown promise of improved flexibility in fracture toughness measurements at the microscale, partly due to the occurrence of an unusual fracture instability, i.e., a transition from stable to unstable crack propagation. In spite of growing interest in this method, the underlying mechanism of this phenomenon is yet to be elucidated. Furthermore, we provide a comprehensive description of fracture instability in indentation pillar-splitting by combining in situ experiments with high-fidelity simulations based on cohesive zone and J-integral methods. In addition, a machine-learning-based solution for predicting the critical indentation load of fracture instability is established through Gaussian processes regression for broad use of this method by the community.

36 MATERIALS SCIENCE↗

Inference of phase field fracture models

The phase field approach to modeling fracture uses a diffuse damage field to represent cracks. This representation mollifies singularities that arise in computations with sharp interface models and some of the resultant difficulties in the mathematical and numerical treatment of fracture. Phase field fracture models have proven effective at representing crack propagation, branching, and merging. Specific formulations, beginning with brittle fracture, have also been shown to converge to classical solutions. Extensions to cover the range of material failure, including ductile and cohesive fracture, lead to an array of possible models. There exists a large body of literature focusing on this class of models and on the impact of model form on the predicted crack evolution. However, there have not been systematic studies into how optimal models may be chosen. Here, we take a first step in this direction by developing formal methods for identification of the best parsimonious model of phase field fracture given full-field data on the damage and deformation fields. We consider some of the main models that have been used for the degradation of elastic response due to damage and its propagation. Our approach builds upon Variational System Identification (VSI), a weak form variant of the Sparse Identification of Nonlinear Dynamics (SINDy). Furthermore, in this first communication we focus on synthetically generated data but we also consider central issues associated with the use of experimental full-field data, such as data sparsity and noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigating the interconnectedness of active transportation and public transit usage as a primer for Mobility-as-a-Service adoption and deployment

With the advent of Mobility-as-a-Service packages to reduce car usage and (by extension) greenhouse gas emissions, it is crucial that researchers and practitioners consider mutual determinants and outcomes that link the adoption of multiple alternative modes. This study therefore investigates the joint usage of active travel (walking, cycling, bike-sharing) and public transit (bus, rail) modes with respect to personal and situational contexts. Online survey data (n = 826) were collected across six Midwestern U.S. states using Amazon MTurk. Respondents indicated their average weekly usage of eight travel modes across three trip purposes so that multimodality could be assessed. Several psychological constructs were extracted via (a) the stages of change framework, used to indicate willingness to adopt new behavior, and (b) confirmatory factor analysis conducted on Likert scales rooted in theories of community, identity, norms, personality, and well-being. A multiple-indicators multiple-causes structural equation model is then employed to investigate the process of adopting a modality style that incorporates active and transit modes. The model confirms that compatible physical and social contexts, as well as navigational skills and openness to learning, are key primers of multimodalism. However, a path juncture stemming from neighborhood support for mobility innovation illustrates a potential polarity in outcomes between individuals and communities. In addition, the stage of active mobility adoption is linked to identity and norm activation, offering further guidance on what influences readiness for change. The seamless integration of mobility services is critical to matching the convenience and comfort of the private vehicle; understanding potential pathways to sustainable mobility, though, requires analyses and interventions that are driven by well-being outcomes and grounded in rigorous psychological frameworks. Here, the research findings offer practical guidance for identifying intervention opportunities to be linked with MaaS enrollment while demonstrating the need to illuminate how mobility might relate to social cohesion, identity expression, and various sources of satisfaction.

42 ENGINEERING↗

First-principles calculation of lattice distortions in four single phase high entropy alloys with experimental validation

Exceptional properties of high entropy alloys (HEAs) are attributed to the disordered random solid solution of multiple alloying elements. Despite numerous studies, the fundamental understanding at the electronic and atomic levels is still missing. We report a comparative study of four fcc HEAs of NiFeCoCr and NiFeCoCrX (X = Mn, Cu, or Pd) based on ab initio calculations using large supercells with 500 atoms in equal composition. After fully optimizing their structures using the VASP package, their electronic structure, interatomic bonding, partial charge distribution, and mechanical properties are calculated and compared, revealing the intricate interdependence among them. A novel parameter based on the quantum mechanical metric for internal cohesion, the total bond order density (TBOD), is used to interpret the calculated properties. The highest TBOD is found in Cantor alloy NiFeCoCrMn but lower in NiFeCoCrPd. The atomic radii vary depending on their local chemical environment. The resulting lattice distortions is validated experimentally in NiFeCoCrMn and NiFeCoCrPd. Moreover, modeling of Cu and Pd clustering in the supercell shows they have lower total energy in agreement with the observation of Cu-enhanced nano-participates in NiFeCoCrCu and Pd-induced concentration wave in NiFeCoCrPd HEAs.

36 MATERIALS SCIENCE↗

Minor titanium addition markedly improves the co-deformability of copper-tantalum composites

We investigated the microstructures of equal channel angular extrusion (ECAE) processed sintered composites of copper (Cu) and tantalum (Ta). These composites were produced with nominal Ta volume percentages ranging from 25% to 75%. Additional composites of the same nominal Ta content were prepared with a minor amount of titanium (Ti) added to facilitate interphase bonding. Ti addition was found to markedly improve the strength and co-deformability of the composites, allowing reliable extrusion of Cu-Ta composites with novel microstructures. A major influence of the Ti appears to be to soften the Ta, which contributes to improved co-deformability by reducing the flow stress mismatch between the composite constituents. Here, a change in the fracture surface morphology in the Ti-modified composite compared to the unmodified composite suggests that the Ti may also improve cohesion between Cu and Ta by reducing Ta surface oxides.

36 MATERIALS SCIENCE↗

Fortifying the frontier: cell wall modifications during plant immunity

The plant cell wall (CW) was long thought to be a rigid barrier encasing the plant cell and protecting it against biotic and abiotic stressors. Different CW polysaccharides interact with each other, and modifications of either the components or organization of these polysaccharides result in impaired growth or immunity. Emerging evidence suggests that the CW is dynamically modified and reorganized based on internal and external cues. Thus, the CW is both the first barrier that pathogens encounter and the critical final step in defense signaling that leads to fortification of the CW. Here, in this work, we review recent findings on how CW components are remodeled to fortify the CW upon pathogen attack and propose a novel concept: layered CW remodeling as an immune strategy. Within this framework, we categorize three interconnected layers of CW remodeling upon pathogen attack: (i) rapid and reversible CW depositions that provide immediate but transient protection; (ii) flexible modifications with plausible signaling functions that integrate defense and surveillance; and (iii) irreversible fortifications that encase pathogen, delimiting infected cells from uninfected cells. This layered framework provides a cohesive view of how different CW modifications are integrated into, and contribute to, plant defense. We also discuss the challenges in studying CW modifications during biotic stresses and highlight important questions that remain unanswered.

Bhandari, Deepak D. [Michigan State Univ., East La↗

Interplay of surface energy and rheology in biopolymer soil enhancement

Biopolymers such as xanthan gum (XG) and locust bean gum (LBG) hold great potential as eco-friendly alternative soil binders. In this work, we investigated the impact of XG/LBG mixtures on the unconfined compressive strength (UCS) of sand. The high strength of dry biopolymer/sand arises from the cohesion between solid polymer films and sand particles which supported by work of adhesion calculation and soil mechanics measurement. LBG exhibits much lower sand reinforcement efficacy because polymers unevenly distributed within sand matrix. The formation of a core-shell structure in LBG/sand is an interplay of surface free energy and viscoelastic properties of polymer solutions. This structure is altered when LBG mixed with XG at varying ratios as those physical properties changed due to the complexity of polymer chains association. By probing these factors, we aim to elucidate the role of surface energies and polymer physics in governing the strength of the sand/polymer network, thereby contributing to a more comprehensive understanding polymer-sand interface. The low strength of gels (G’ ∼10Pa) cannot solely account for the increased UCS of wet sand over 10 kPa. Instead, the high strength of biopolymer/sand is more likely derived from the granular particles with biopolymers as solid glue.

36 MATERIALS SCIENCE↗

Rheological effects of moisture content on the anatomical fractions of loblolly pine (Pinus taeda)

Here, this study focused on assessing the influence of moisture content on the rheological properties of different anatomical fractions of pine residue using the FT4 powder rheometer. Moisture content exhibited some influence on the 2 mm bark and needle fractions, increasing their cohesion, angle of internal friction, unconfined yield strength, and major principal stress. Stem and whole, on the other hand, presented minimal changes upon moisture introduction. All 4 mm fractions did not show many changes in their rheological properties with moisture introduction, which can be due to less particle-particle interactions and consequently reducing any liquid bridging the particles might undergo; however, they were shown to have a more unpredictable behavior compared to the 2 mm analogues (i.e., higher standard deviation) which can be due to a higher degree of particle-interlocking. Out of the three fractions, needle presented the poorest rheological properties for flowability in addition to being susceptible by moisture, unlike other fractions.

36 MATERIALS SCIENCE↗

In situ probing of structure and deagglomeration of SnO 2 colloids via small-angle X-ray scattering

Transforming dry nanopowders into stable colloidal dispersions remains challenging due to the cohesive forces between the nanoparticles (NPs) which promote agglomeration. Effective dispersion and deagglomeration of these agglomerates is a critical process in the formulation and preparation of nanoparticle-based functional materials via the colloidal route. Understanding the deagglomeration dynamics provides information to improve microstructural quality in various applications by enabling engineering of agglomerate size, structure and morphology. However, the deagglomeration process dynamics with respect to the evolution of the fractal agglomerate structures, particularly for very small NPs, is still poorly understood and requires further investigation. This study employs in situ small-angle X-ray scattering (SAXS) to investigate the sonication-induced deagglomeration of SnO 2 NPs. Electrostatically stabilized SnO 2 colloids with varying primary particle size (6–21 nm) are investigated in a specifically designed in situ cell using synchrotron-based SAXS to study the influence of sonication time and intensity on the nanoscaled agglomerates. Complete structural analysis via SAXS reveals a direct correlation between changes in agglomerate size and structure, size-dependent deagglomeration behavior and a dependence on the overall energy introduced during sonication into the dispersion regardless of the actual power as well as ultrasonic process parameters in case of SnO 2 NPs. The results suggest that control of the dispersion process during ultrasonic deagglomeration results in tailoring agglomerates with respect to size and structure.

Deagglomeration↗

Correlating viscosity and die swell in 3D printing of polyphenylsulfone: A thermo-mechanical optimization modus operandi

Additive manufacturing (AM) of polyphenylsulfone (PPSU), an amorphous high-performance polymer (HPP), has shown promise in exhibiting structural integrity for many applications. With thermoplastic material extrusion 3D printing, parts consisting of layered melts exhibited voids, where the adhesion quality and void size depend on the processing parameters implemented during printing. However, the structure-process-property (SPP) relationships between the thermal properties and rheological and mechanical behavior of AM PPSU are poorly understood. Here, in this study, a comprehensive analysis of the thermal, thermo-mechanical, and layer-by-layer build-up of PPSU is investigated and correlated with viscosity and extrudate die swell behavior with void fraction volume as confirmed by high-resolution x-ray computed tomography (XCT). Gas chromatography–mass spectrometry (GC–MS) pyrolysis confirmed PPSU composition and degradation at 480 °C, consistent with thermo-gravimetric analysis TGA. A 141% difference in viscosity was observed when processing temperatures increased from 350 °C to 400 °C. Likewise, extrudate die swell decreased with increasing temperatures, resulting in a 17% difference. Tensile and compressive properties confirmed that higher extruding temperatures resulted in lower porosity and higher mechanical strength. In general, higher extruding temperatures lower the viscosity to allow for stronger cohesion between layers; however, increasing the temperature too high results in a below unity extrudate die swell, reducing mechanical properties. Therefore, to optimize the mechanical integrity of 3D printed amorphous PPSU parts, an increase in the viscosity, near unity of the extrudate die swell, and tempered extrusion temperature are needed.

36 MATERIALS SCIENCE↗

The detrimental effect of elemental contaminants when using B additions to improve the creep properties of a Ni-based superalloy

The effect of Si contamination when using B to improve the creep properties of a Ni-based superalloy was investigated using advanced characterization techniques and first-principles simulations on alloys with high and low B levels with varying Si contents. The positive effect of B segregation along grain boundaries on the creep properties was mitigated by the presence of Si which showed a similar segregation preference. Density functional theory calculations were used for validation by calculating grain boundary cleavage energies. Silicon was shown to decrease grain boundary cohesion which offsets the positive effect of B.

36 MATERIALS SCIENCE↗

A Universal Machine Learning Model for Elemental Grain Boundary Energies

The grain boundary (GB) energy has a profound influence on the grain growth and properties of polycrystalline metals. Here, we show that the energy of a GB, normalized by the bulk cohesive energy, can be described purely by four geometric features. By machine learning on a large computed database of 361 small Σ (Σ<10) GBs of more than 50 metals, we develop a model that can predict the grain boundary energies to within a mean absolute error of 0.13 J m –2 . More importantly, this universal GB energy model can be extrapolated to the energies of high Σ GBs without loss in accuracy. These results highlight the importance of capturing fundamental scaling physics and domain knowledge in the design of interpretable, extrapolatable machine learning models for materials science.

36 MATERIALS SCIENCE↗

Optimization-based approaches to control of connected and automated vehicles: Principles, complexities, applications, challenges, and outlook

Safe and optimal motion control for connected and automated vehicles (CAVs) poses a fundamental optimization challenge at the intersection of system complexity, environmental uncertainty, and stringent real-time constraints. Existing surveys address this challenge in isolation – focusing either on specific control techniques or individual uncertainty sources – without providing a unified framework that characterizes the trade-offs among computational tractability, performance verifiability, and adaptive generalization across paradigms. This review addresses that gap by presenting a cohesive analytical framework concentrated on the decision-making and trajectory optimization layers of the CAV autonomy stack. We systematically analyze three major optimization paradigms – first-principles model-based optimization, data-driven methods, and hybrid synergistic architectures – evaluating each against four core complexity axes: problem formulation, constraint handling, optimality guarantees, and robustness. Key applications including platooning, trajectory planning, collision avoidance, and cooperative control are examined to reveal recurring methodological patterns and critical operational constraints that limit real-world performance. Our synthesis identifies verifiable hybrid architectures, incentive-aligned multi-agent cooperation, and hardware-algorithm co-design as the defining research frontiers, and distills a targeted agenda for developing CAV control systems that are simultaneously safe, computationally efficient, and deployable in the full complexity of real-world traffic environments.

Muzahid, Abu Jafar Md [University of Tennessee, Kn↗