SEARCH · Engineering Papers

Results for “cloud base height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Influence of Deep Convection on Cirrus and Water Vapor Concentration in the Upper Troposphere and Lower Stratosphere

It is well known that stratospheric humidity is primarily controlled by freeze drying (ice crystal growth and sedimentation) of air ascending across the cold tropical tropopause. However, the suggestion of an important source of water vapor from deep convection that extends above the tropical tropopause has persisted. There exists much anecdotal evidence of direct convective hydration of the lower stratosphere based on measurements from high altitude aircraft campaigns, but quantifying the impact of deep convection on the overall budget of stratospheric water vapor has proven challenging. The role of convection on the humidity of the upper troposphere and lower stratosphere (UTLS) is investigated in simulations of cirrus clouds along trajectories launched from given potential temperature level surfaces. The one-dimensional (vertical) cloud model tracks individual ice crystals through their life cycles, beginning with nucleation or detrainment from convection, followed by deposition growth, sedimentation and sublimation. Convective influence of the parcels is diagnosed by tracing the trajectories through time-dependent fields of convective cloud-top height adjusted to match the CloudSAT and CALIPSO statistics. Model simulations of UTLS water vapor and cloud fields are evaluated and constrained by comparison with MLS and CALIPSO measurements. The simulation results indicate that the overall impact of convection on water vapor near the tropical tropopause is 10-15%, while the impact on lower stratospheric humidity is no more than a few percent. Ice crystals detrained from deep convection have relatively small effect. The general implications for the importance of deep convection on UTLS humidity and cirrus cloud fraction will be discussed.

Ueyama, Rei↗

NASA NTRS1990

Cirrus structure and radiative parameters from airborne lidar and spectral radiometer observations - The 28 October 1986 FIRE study

A description is presented of cirrus based on results from a FIRE observation flight in central Wisconsin on October 28, 1986. Cirrus structure and radiative parameters as determined by the ER-2 lidar and imaging spectral radiometers are presented. From the lidar observations a complex structure was shown with differing cloud layers extending over six kilometers of altitude range. Both thin and dense cirrus layers were present and mixed phase clouds were found at lower altitudes. As indicated by the cloud structure, precipitation of crystals from high, but vertically thin, layers produces a significant fraction of the lower cirrus. Multiple layers should be considered as normal for cirrus formations. It is noted that the cloud height is an important factor for satellite cloud retrievals and cloud climatology.

Spinhirne, James D.↗

NASA NTRS2021

Detection and Height Measurement of Tenuous Clouds and Blowing Snow in ICESat-2 ATLAS Data

Tenuous atmospheric layers, such as high, thin cirrus clouds and blowing snow over Antarctica, play an important role in the climate system, affecting energy fluxes between the Earth and the atmosphere. Our knowledge of the structure of the atmosphere is largely derived from atmospheric satellite measurements. Yet tenuous layers can be hard to detect in satellite lidar data, especially in daylight data characterized by high solar background. In this study, we introduce an approach to detect tenuous atmospheric layers in the atmospheric lidar measurements of NASA's ICESat-2. The density-dimension algorithm for ICESat-2 atmospheric data (DDA-atmos) identifies atmospheric layers while automatically adapting to different background conditions of night, twilight, and daylight data. This capability, demonstrated for tenuous clouds and blowing snow, offers a data-based solution to an important climate modeling problem. Atmospheric layer boundaries, detection confidence, and density fields resultant from the DDA-atmos are reported in ICESat-2 atmospheric data product ATL09.

Ute Herzfeld↗

NASA NTRS2004

Near-Real Time Cloud Properties and Aircraft Icing Indices from GEO and LEO Satellites

Imagers on many of the current and future operational meteorological satellites in geostationary Earth orbit (GEO) and lower Earth orbit (LEO) have enough spectral channels to derive cloud microphysical properties useful for a variety of applications. The products include cloud amount, phase, optical depth, temperature, height and pressure, thickness, effective particle size, and ice or liquid water path, shortwave albedo, and outgoing longwave radiation for each imager pixel. Because aircraft icing depends on cloud temperature, droplet size, and liquid water content as well as aircraft variables, it is possible to estimate the potential icing conditions from the cloud phase, temperature, effective droplet size, and liquid water path. A prototype icing index is currently being derived over the contiguous USA in near-real time from Geostationary Operational Environmental Satellite (GOES-10 and 12) data on a half-hourly basis and from NOAA- 16 Advanced Very High Resolution (AVHRR) data when available. Because the threshold-based algorithm is sensitive to small errors and differences in satellite imager and icing is complex process, a new probability based icing diagnosis technique is developed from a limited set of pilot reports. The algorithm produces reasonable patterns of icing probability and intensities when compared with independent model and pilot report data. Methods are discussed for improving the technique for incorporation into operational icing products.

Minnis, Patrick↗

NASA NTRS1990

Subvisual Cirrus cloud properties derived from a FIRE IFO case study

From the central Wisconsin IFO field at Wausau, the Mobile Polarization Lidar and a surface radiation station from the Lamont-Doherty Geological Observatory observed two very tenuous cirrus clouds on 21 October 1986. The clouds were present just below the height of the tropopause, between -60 to -70 C. The first cloud was not detected visually, and is classified as subvisual cirrus. The second, a relatively narrow cloud band that was probably the remnants of an aircraft contrail, can be termed zenith-subvisual since, although it was invisible in the zenith direction, it could be discerned when viewed at lower elevation angles and also due to strong solar forward-scattering and corona effects. The observations provide an opportunity to assess the threshold cloud optical thickness associated with cirrus cloud visibility. Ruby lidar backscattered signals were converted to isotropic volume backscatter coefficients by applying the pure-molecular scattering assumption just below the cloud base. The backscattering coefficient due to the cloud is then obtained and expressed in relation to the molecular backscattering coefficient in terms of the scattering ratio R. The linear depolarization ratio for the cloud is computed after removing the essentially parallel-polarized scattering contribution from air molecules. The values are also applied to determine the cloud optical thickness through the use of backscatter-to-extinction ratio, and the concentration of cloud particles using the backscattering gain, and the effective diameter of the particles obtained from the analysis of solar corona photographs. The sizes of the particles generating the corona are related to the angular separations between the centers of the red bands and the sun, yielding diameters of approximately 25 microns. The direct and diffuse components of shortwave radiation fluxes, measured by full hemispheric pyranometers, were used to compute the nadir optical thickness of the total atmosphere.

Sassen, Kenneth↗

NASA NTRS1984

Altimeter height measurement errors introduced by the presence of variable cloud and rain attenuation

It has recently been recognized that spatially inhomogeneous clouds and rain can substantially affect the height precision obtainable from a spaceborne radar altimeter system. Through computer simulation, it has been found that typical levels of cloud and rain intensities and associated spatial variabilities may degrade altimeter precision at 13.5 GHz and, in particular, cause severe degradation at 35 GHz. This degradation in precision is a result of radar signature distortion caused by variable attenuation over the beam limited altimeter footprint. Because attenuation effects increase with frequency, imprecision caused by them will significantly impact on the frequency selection of future altimeters. In this paper the degradation of altimeter precision introduced by idealized cloud and rain configurations as well as for a realistic rain configuration as measured with a ground based radar is examined.

Monaldo, F. M.↗

NASA NTRS1986

Altimeter height measurement error introduced by the presence of variable cloud and rain attenuation

Monaldo, F. M.↗

NASA NTRSDate not supplied

Exploring Environmental and Aerosol Impacts on Maritime Tropical Convection using Airborne Radiometer, Radar, Lidar, and Dropsondes

The field deployment phase of NASA’s Cloud, Aerosol and Monsoon Processes Philippines Experiment (CAMP2Ex) took place around the Philippines during August–October 2019, with the primary goal of jointly investigating aerosols and tropical meteorology at the micro-β to meso-β scales. A suite of instruments was deployed on NASA’s P-3B Orion aircraft to accomplish this mission, including: the Advanced Microwave Precipitation Radiometer (AMPR), Airborne Precipitation and cloud Radar 3rd Generation (APR-3), High Spectral Resolution Lidar 2 (HSRL2), and Advanced Vertical Atmospheric Profiling System (AVAPS) dropsondes. To examine potential aerosol influences on maritime tropical convection, P-3 flight segments throughout CAMP2Ex were binned into similar environmental groups using “low,” “medium,” and “high” values of nine AVAPS-derived parameters with known physical connections to convective frequency and/or intensity. Aerosol concentrations in each flight segment were evaluated using three HSRL2 variables at 355 and 532 nm: aerosol backscatter, aerosol extinction, and aerosol optical thickness. A set of radiometer- and radar-derived variables directly related to convective frequency and/or intensity was used to characterize convection, which included: AMPR-derived integrated cloud liquid water; polarization-corrected temperatures at 10.7, 19.35, 37.1, and 85.5 GHz; peak equivalent radar reflectivity factor (ZH); peak height of 30-dBZ ZH; and the number of radar data columns with composite ZH > 30 dBZ. The ZH analyses were performed using both Ku- and Ka-band APR-3 data. For each flight segment, correlation coefficients were calculated between each convective parameter and aerosol concentrations within the “low,” “medium,” and “high” groups for each environmental variable. The environmental stratification thresholds were then varied in a series of sensitivity tests. Several noteworthy correlations were observed between the convective and aerosol parameters within the environmental groups, especially when stratifying the environments based on their 850–500-hPa temperature lapse rate, 700–500-hPa temperature lapse rate, and K-Index. The convective parameters were often correlated most strongly with 355-nm extinction, 532-nm extinction, and 532-nm backscatter, while the presence of precipitation-sized liquid and ice hydrometeors contributed to some unexpected negative correlations. In general, as environmental conditions became more favorable for convection, a stronger correlation was observed between the convective parameters and aerosol concentrations. However, a “Goldilocks” zone of medium aerosol concentration was correlated most strongly with the convective parameters in many cases. These results stress the importance of considering environmental and aerosol conditions together when evaluating their impacts on convection. This presentation will provide a detailed discussion of these results and their implications, a summary of the limitations associated with such an analysis, and suggestions for future work.

Corey G. Amiot↗

NASA NTRS2004

Laser Sounder for Global Measurement of CO2 Concentrations in the Troposphere from Space: Progress

We describe progress toward developing a laser-based technique for the remote measurement of the tropospheric CO2 concentrations from orbit. Our goal is to demonstrate a lidar technique and instrument technology that will permit measurements of the CO2 column abundance in the lower troposphere from aircraft at the few ppm level, with a capability of scaling to permit global CO2 measurements from orbit. Accurate measurements of the tropospheric CO2 mixing ratio from space are challenging due to the many potential error sources. These include possible interference from other trace gas species, the effects of temperature, clouds, aerosols & turbulence in the path, changes in surface reflectivity, and variability in dry air density caused by changes in atmospheric pressure, water vapor and topographic height. Some potential instrumental errors include frequency drifts in the transmitter, small transmission and sensitivity drifts in the instrument. High signal-to-noise ratios and measurement stability are needed for mixing ratio estimates at the few ppm level. We have been developing a laser sounder approach as a candidate for a future space mission. It utilizes multiple different laser transmitters to permit simultaneous measurement of CO2 and O2 extinction, and aerosol backscatter in the same measurement path. It directs the narrow co-aligned laser beams from the instrument's fiber lasers toward nadir, and measures the energy of the strong laser echoes reflected from the Earth's land and water surfaces. During the measurement its narrow linewidth lasers are rapidly tuned on- and off- selected CO2 line near 1572 nm and an O2 absorption line near 770 nm. The receiver measures the energies of the laser echoes from the surface and any clouds and aerosols in the path with photon counting detectors. Ratioing the on- to off-line echo pulse energies for each gas permits the column extinction and column densities of CO2 and O2 to be estimated simultaneously via the differential absorption lidar technique. For the on-line wavelengths, the side of the selected absorption lines are used, which due to pressure broadening, weights the measurements to the lower troposphere, where CO2 variations caused by surface sources and sinks are largest. Simultaneous measurements of O2 column abundance are made using an identical approach using an O2 line. The laser backscatter profiles from clouds and aerosols are measured with other lidar channels, which permits identifying measurements influenced by clouds and/or aerosol scattering in the path. For space use, our lidar would continuously measure at nadir in near polar circular orbit. Using dawn and dusk measurements made over the same region will make it possible to sample the diurnal variations in CO2 mixing ratios. A 1-m diameter telescope is used for the receiver for all wavelengths. When averaging over 50 seconds, our calculations show a SNR of approximately 1500 is achievable for each gas at each on- and off-line measurement. Measurements from such a mission can be used to generate monthly global maps of the lower tropospheric CO2 column abundance. Our calculations show global coverage with an accuracy of a few ppm with a spatial resolution of approximately 50,000 sq. km are achievable each month. We have demonstrated some key elements of the laser, detector and receiver approaches in the laboratory and with measurements over a 206 m horizontal path. These include stable measurements of CO2 line shapes in an absorption cell using a fiber laser amplifier seeded by a tunable diode laser, measurement of small amplitude changes at low optical signal levels with the PMT receiver, and comparison of the horizontal path measurements of CO2 against those from an in-situ instrument.

Abshire, J. B.↗

NASA NTRS1986

Investigation of clouds spatial distribution using ground-based lidar

Certain investigations of spatial distribution of clouds by employing ground based lidar are presented. The great changeability is one of the main properties of the clouds in the boundary layer. As a result, their optical properties change rapidly which complicates the modeling of cloud evolution. Suitable equipped lidars are widely used for diagnostics of the clouds via a number of scattering and absorption processes. In particular, lidar can provide information on the distribution of meteorological parameters and of the other important cloud characteristics both in vertical and horizontal directions. Herein the time and spatial distribution of the aerosol backscattering coefficient of S sub t and S sub c type clouds are investigated by means of a correlation analysis of the lidar obtained data provided from several arbitrary directions and heights.

Kolev, I. N.↗

NASA NTRS2015

Applying Advanced Ground-Based Remote Sensing in the Southeast Asian Maritime Continent to Characterize Regional Proficiencies in Smoke Transport Modeling

This work describes some of the most extensive ground-based observations of the aerosol profile collected in Southeast Asia to date, highlighting the challenges in simulating these observations with a mesoscale perspective. An 84-h WRF Model coupled with chemistry (WRF-Chem) mesoscale simulation of smoke particle transport at Kuching, Malaysia, in the southern Maritime Continent of Southeast Asia is evaluated relative to a unique collection of continuous ground-based lidar, sun photometer, and 4-h radiosonde profiling. The period was marked by relatively dry conditions, allowing smoke layers transported to the site unperturbed by wet deposition to be common regionally. The model depiction is reasonable overall. Core thermodynamics, including landsea-breeze structure, are well resolved. Total model smoke extinction and, by proxy, mass concentration are low relative to observation. Smoke emissions source products are likely low because of undersampling of fires in infrared sun-synchronous satellite products, which is exacerbated regionally by endemic low-level cloud cover. Differences are identified between the model mass profile and the lidar profile, particularly during periods of afternoon convective mixing. A static smoke mass injection height parameterized for this study potentially influences this result. The model does not resolve the convective mixing of aerosol particles into the lower free troposphere or the enhancement of near-surface extinction from nighttime cooling and hygroscopic effects.

Aerosols; Air quality; Lidars/Lidar observations; ↗

NASA NTRS1985

Balloon-based interferometric techniques

A balloon-borne triple-etalon Fabry-Perot Interferometer, observing the Doppler shifts of absorption lines caused by molecular oxygen and water vapor in the far red/near infrared spectrum of backscattered sunlight, has been used to evaluate a passive spaceborne remote sensing technique for measuring winds in the troposphere and stratosphere. There have been two successful high altitude balloon flights of the prototype UCL instrument from the National Scientific Balloon Facility at Palestine, TE (May 80, Oct. 83). The results from these flights have demonstrated that an interferometer with adequate resolution, stability and sensitivity can be built. The wind data are of comparable quality to those obtained from operational techniques (balloon and rocket sonde, cloud-top drift analysis, and from the gradient wind analysis of satellite radiance measurements). However, the interferometric data can provide a regular global grid, over a height range from 5 to 50 km in regions of clear air. Between the middle troposphere (5 km) and the upper stratosphere (40 to 50 km), an optimized instrument can make wind measurements over the daylit hemisphere with an accuracy of about 3 to 5 m/sec (2 sigma). It is possible to obtain full height profiles between altitudes of 5 and 50 km, with 4 km height resolution, and a spatial resolution of about 200 km, along the orbit track. Below an altitude of about 10 km, Fraunhofer lines of solar origin are possible targets of the Doppler wind analysis. Above an altitude of 50 km, the weakness of the backscattered solar spectrum (decreasing air density) is coupled with the low absorption crosssection of all atmospheric species in the spectral region up to 800 nm (where imaging photon detectors can be used), causing the along-the-track resolution (or error) to increase beyond values useful for operational purposes. Within the region of optimum performance (5 to 50 km), however, the technique is a valuable potential complement to existing wind measuring systems and can provide a low cost addition to powerful active (LIDAR) wind measuring systems now under development.

Rees, David↗

NASA NTRS2008

Analysis of Proposed 2007-2008 Revisions to the Lightning Launch Commit Criteria for United States Space Launches

Ascending space vehicles are vulnerable to both natural and triggered lightning. Launches under the jurisdiction of the United States are generally subject to a set of rules called the Lightning Launch Commit Criteria (LLCC). The LLCC protect both the vehicle and the public by assuring that the launch does not take place in conditions posing a significant risk of a lightning strike to the ascending vehicle. Such a strike could destroy the vehicle and its payload, thus causing failure of the mission while releasing both toxic materials and debris. To assure safety, the LLCC are conservative and sometimes they may seriously limit the ability of the launch operator to fly as scheduled even when conditions are benign. In order to safely reduce the number of launch scrubs and delays attributable to the LLCC, the Airborne Field Mill (ABFM) program was undertaken in 2000 - 2001. The effort was directed to collecting detailed high-quality data on the electrical, microphysical, radar and meteorological properties of thunderstorm-associated clouds. The expectation was that this additional knowledge would provide a better physical basis for the LLCC and allow them to be revised to be both safer and less restrictive. That expectation was fulfilled, leading to significant revisions to the LLCC in 2003 and 2005. The 2005 revisions included the application of a new radar-derived quantity called the Volume Averaged Height Integrated Radar Reflectivity (VAHIRR) in the rules governing flight through anvil clouds. Analysis of the ABFM data has continued, and two additional revisions to the LLCC were proposed in late 2006 for adoption in 2007 or 2008. One proposal was to apply the VAHIRR concept to debris clouds, and the other was to reduce the "stand-off distances" in the rules for anvil and/or debris clouds. The stand-off distance is the clearance (out side of the cloud) required between the flight path of the vehicle and the edge of a cloud that it is not permissible to fly through. This paper will discuss these proposed changes in the LLCC and the scientific rationale for adopting or rejecting them based on ABFM data.

Dye, J. E.↗

NASA NTRS2011

Assessing Impact of Aerosol Intercontinental Transport on Regional Air Quality and Climate: What Satellites Can Help

Mounting evidence for intercontinental transport of aerosols suggests that aerosols from a region could significantly affect climate and air quality in downwind regions and continents. Current assessment of these impacts for the most part has been based on global model simulations that show large variability. The aerosol intercontinental transport and its influence on air quality and climate involve many processes at local, regional, and intercontinental scales. There is a pressing need to establish modeling systems that bridge the wide range of scales. The modeling systems need to be evaluated and constrained by observations, including satellite measurements. Columnar loadings of dust and combustion aerosols can be derived from the MODIS and MISR measurements of total aerosol optical depth and particle size and shape information. Characteristic transport heights of dust and combustion aerosols can be determined from the CALIPSO lidar and AIRS measurements. CALIPSO liar and OMI UV technique also have a unique capability of detecting aerosols above clouds, which could offer some insights into aerosol lofting processes and the importance of above-cloud transport pathway. In this presentation, I will discuss our efforts of integrating these satellite measurements and models to assess the significance of intercontinental transport of dust and combustion aerosols on regional air quality and climate.

Yu, Hongbin↗

NASA NTRS2020

AWARE: The Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment

The US Department of Energy Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment (AWARE) performed comprehensive meteorological and aerosol measurements, and ground-based atmospheric remote sensing at two Antarctic stations using the most advanced instrumentation available. A suite of cloud research radars, lidars, spectral and broadband radiometers, aerosol chemical and microphysical sampling equipment, and meteorological instrumentation was deployed at McMurdo Station on Ross Island from December 2015 through December 2016. A smaller suite of radiometers and meteorological equipment including radiosondes, optimized for surface energy budget measurement, was deployed on the West Antarctic Ice Sheet between 4 December 2015 and 17 January 2016. AWARE provided Antarctic atmospheric data comparable to several well-instrumented high Arctic sites that have operated for many years and that reveal numerous contrasts with the Arctic in aerosol and cloud microphysical properties. These include persistent differences in liquid cloud occurrence, cloud height and cloud thickness. Antarctic aerosol properties are also quite different from the Arctic in both seasonal cycle and composition, due to the continent’s isolation from lower latitudes by Southern Ocean storm tracks. Antarctic aerosol number and mass concentrations are not only non-negligible but perhaps play a more important role than previously recognized because of the higher sensitivities of clouds at the very low concentrations caused by the large-scale dynamical isolation. Antarctic aerosol chemical composition, particularly organic components, has implications for local cloud microphysics. The AWARE data set, fully available online in the ARM Program data archive, offers numerous case studies for unique and rigorous evaluation of mixed-phase cloud parameterization in climate models.

Atmospheric Radiation Measurement (ARM)↗

NASA NTRS2001

Sensitivity Studies for Space-Based Global Measurements of Atmospheric Carbon Dioxide

Carbon dioxide (CO2) is well known as the primary forcing agent of global warming. Although the climate forcing due to CO2 is well known, the sources and sinks of CO2 are not well understood. Currently the lack of global atmospheric CO2 observations limits our ability to diagnose the global carbon budget (e.g., finding the so-called "missing sink") and thus limits our ability to understand past climate change and predict future climate response. Space-based techniques are being developed to make high-resolution and high-precision global column CO2 measurements. One of the proposed techniques utilizes the passive remote sensing of Earth's reflected solar radiation at the weaker vibration-rotation band of CO2 in the near infrared (approx. 1.57 micron). We use a line-by-line radiative transfer model to explore the potential of this method. Results of sensitivity studies for CO2 concentration variation and geophysical conditions (i.e., atmospheric temperature, surface reflectivity, solar zenith angle, aerosol, and cirrus cloud) will be presented. We will also present sensitivity results for an O2 A-band (approx. 0.76 micron) sensor that will be needed along with CO2 to make surface pressure and cloud height measurements.

Mao, Jian-Ping↗

NASA NTRS2010

Analysis of Ice Plains of Filchner/Ronne Ice Shelf Using ICESat Data

We use repeat-track laser altimeter data from the Ice, Cloud, and land Elevation Satellite (ICESat) to map the grounding zone of Filchner/Ronne Ice Shelf (FRIS), Antarctica. Repeated passes of ICESat reveal ice flexure in the grounding zone occurs as the ice shelf responds to ocean height changes due primarily to tides. In the course of our mapping, we have confirmed or identified three major "ice plains", regions of low surface slope near the GZ where the ice is close to hydrostatic equilibrium: one on Institute Ice Stream, another to its east, and another west of Foundation Ice Stream. The vertical information from repeated ICESat tracks enables us to study the topography and flexure characteristics across these three ice plains, and we use this to develop a classification scheme for ice plains based on their surface topography and their state of flotation. We show that one of these ice plains indicates changes in lateral extent on short time-scales, depending on the state of the ocean tide. Understanding the location and nature of ice plains is important for ice sheet modeling, since they add uncertainty to the absolute boundary between floating and grounded ice.

Brunt, Kelly M.↗

NASA NTRS2021

A Dark Target research aerosol algorithm for MODIS observations over eastern China: increasing coverage while maintaining accuracy at high aerosol loading

Satellite aerosol products such as the Dark Target (DT) produced from the MODerate resolution Imaging Spectroradiometer (MODIS) are useful for monitoring the progress of air pollution. Unfortunately, the DT often fails to retrieve during the heaviest aerosol events as well as the more moderate events in winter. Some of the literature at-tributes this lack of retrieval to the cloud mask. However, we found this lack of retrieval is mainly traced to thresholds used for masking of inland water and snow. Modifications to these two masks greatly increase 50 % of the retrievals of aerosol optical depth at 0.55 μm (AOD) greater than 1.0. The “extra”-high-AOD retrievals tend to be biased when com-pared with a ground-based sun photometer (AErosol RObotic NETwork, AERONET). Reducing bias in new retrievals re-quires two additional steps. One is an update to the assumed aerosol optical properties (aerosol model); the haze in this region is both less absorbing and lower in altitude than what is assumed in the global algorithm. The second is account-ing for the scale height of the aerosol, specifically that the heavy-aerosol events in the region are much closer to the surface than what is assumed by the global DT algorithm. The resulting combination of modified masking thresholds, new aerosol model, and lower aerosol layer scale height was applied to 3 months of MODIS observations (January–March2013) over eastern China. After these two additional steps are implemented, the significant increase in new retrievals introduces no overall bias at a high-AOD regime but does degrade other overall validation statistics. We also find that the research algorithm is able to identify additional pollution events that AERONET instruments may not due to different spatial sampling. Mean AOD retrieved from the re-search algorithm increases from 0.11 to 0.18 compared to values calculated from the operational DT algorithm during January to March of 2013 over the study area. But near Beijing, where the severe pollution occurs, the new algorithm increases AOD by as much as 3.0 for each 0.5°grid box over the previous operational-algorithm values.

Dark Target↗