Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Alumina-based filters made via binder jet 3D printing of alumina powder, colloidal silica infiltration, and sintering

Alumina-based, porous filter media was made via a binder jet 3D printing process consisting of an alumina powder printing step with subsequent heating, colloidal silica infiltration, drying, and sintering to consolidate particles yet retain a net open porous microstructure. The composites made were alumina-silica or alumina-mullite, where the silica sintering aid was used to densify and join the alumina particles. The resulting composite structures had open porosities in the 25–31 vol% range as measured by Archimedes density. Pressure drops were measured across the filter media at constant flow rates to compare disc shapes and complex, 3D printed filters based on the N95 design requirements. Complex, 3D-printed alumina composites were produced with acceptable pressure drops for N95 implementation.

36 MATERIALS SCIENCE↗

Destructive testings: dry drilling operations with TruPro system to collect samples in a powder form, from two hulls containing immobilized wastes in a hydraulic binder

The TruPro{sup R} process enables to collect a significant number of samples to characterize radiological materials. This innovative and alternative technique is experimented for the ANDRA quality-control inspection of cemented packages. It proves to be quicker and more prolific than the current methodology. Using classical statistics and geo-statistics approaches, the physical and radiological characteristics of two hulls containing immobilized wastes (sludges or concentrates) in a hydraulic binder are assessed in this paper. The waste homogeneity is also evaluated in comparison to ANDRA criterion. Sensibility to sample size (support effect), presence of extreme values, acceptable deviation rate and minimum number of data are discussed. The final objectives are to check the homogeneity of the two characterized radwaste packages and also to validate and reinforce this alternative characterization methodology. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Examining the solid electrolyte interphase on binder-free graphite electrodes.

The solid electrode interphase (SEI) on graphite electrodes is important to the performance, calendar life, and safety characteristics of lithium-ion cells. This article examines the SEI formed on binder-free graphite electrodes prepared by electrophoretic deposition. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis data were obtained on electrodes cycled in cells containing four electrolytes comprising ethylene carbonate: ethylmethyl carbonate (3:7 by weight) solvent and 1.2 M LiPF{sub 6}, 1 M LiF{sub 2}BC{sub 2}O{sub 4}, 1 M LiBF{sub 4}, or 0.7 M LiB(C{sub 2}O{sub 4}){sub 2} salt. Our observations suggest that, in addition to solvent reduction, the reduction of electrolyte salts plays an important role in SEI formation. Mechanisms to account for the formation of these SEI constituents are included in the article.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

python binder for libROM

pylibROM introduces python binder for libROM through pybind11. Through python interface, users who are familiar with python can take advantage of capabilities available in libROM that is fully parallelized C++ library for reduced order modeling. libROM itself is an open source code developed at LLNL. libROM is available at https://github.com/LLNL/libROM .

Choi, Youngsoo↗

Binder-free cold spray deposition of NdFeB permanent magnets

Cold spray deposition is employed to manufacture binder-free Nd 2 Fe 14 B permanent magnets. Millimeter thick deposits can be fabricated in seconds on substrates such as glass or copper. The Nd 2 Fe 14 B particles appear to partially embed in the substrate and interlock with one another, building up a dense layer that is consolidated by subsequent impacts. The impact and subsequent heating of the particles leads to formation of a magnetically soft phase that significantly reduces coercivity, X-ray diffraction identifies it as Fe. Furthermore, this can be mitigated by reducing gas velocity and temperature, leading to a partial retention of magnetic properties.

36 MATERIALS SCIENCE↗

Navigating the complexities of solvent and binder selection for solution processing of sulfide solid-state electrolytes

We introduce a paradigm of solvent and binder selection for solution-processing Li 6 PS 5 Cl solid-state electrolyte particles based on Hansen solubility parameters. Treatment of the Li 6 PS 5 Cl in selected solvents results in particle morphological change, but crystallographic structure remains intact. Although solution processing reduced the Li 6 PS 5 Cl ionic conductivity, it promotes interfacial stability by alleviating reduction of the solid electrolyte in contact with Li metal. In conclusion, these findings have the potential to enhance the stability, structural integrity, and performance of sulfide solid-state electrolytes in practical applications.

25 ENERGY STORAGE↗

Progress Summary: Developing experimental methods to quantify the degree of crystallinity in fluoropolymer binders

Understanding fluoropolymer binder structure and aging response continues to be an important goal for the prediction and assessment of polymer bonded explosive compositions within the stockpile. As part of ongoing efforts within NNM, we are developing new methods to quantify crystallization and chemical degradation within aged Fluoropolymer materials.

36 MATERIALS SCIENCE↗

Binder Jet Tooling for Automotive Lighting Industry. CRADA Final Report

The goal of this collaborative project between Oak Ridge National Laboratory’s (ORNL) Manufacturing Demonstration Facility (MDF) and Grote Industries, LLC was to develop additively manufactured tooling to produce lighting products in a production environment. The project explored the use of metal powder bed systems to rapidly manufacture moderately sized injection molding tools (less than 8” x 8” x 2”) for automotive lamps. The team designed the mold (male and female), manufactured the mold using the binder jet process, experimented with finishing processes, manufactured parts using the molds, and monitored the wear on the mold to predict life.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Exploration of Binder Jet Additive Manufacturing for Automotive Heat Sink Component Fabrication

ORNL (Contractor) and Magna Services of America Inc. (Participant) collaborated to determine the feasibility of binder jet additive manufacturing (BJAM) for the fabrication of copper components for automotive heat sink applications. This Phase 1 collaboration focused on printing copper heat sinks that rely on capillary effect to move fluids rather than mechanical pumps in electric vehicles to extend the battery range and life. Partial sintering of copper powders deposited via BJAM was hypothesized to aid capillary effect to improve the heat transfer. Further, BJAM offers the potential for scalability at a production level.

36 MATERIALS SCIENCE↗

Water Atomized H13 Tool Steel Powders for Binder Jet Additive Manufacturing

ORNL (Contractor) and Ametek, Inc. (Participant) collaborated to determine the feasibility of adopting water atomized H13 tool steel powder for binder jet additive manufacturing (BJAM) for tooling applications. The capability to utilize water atomized powders can substantially reduce powder expenses for BJAM, enabling process competitiveness with casting whilst enabling new applications of high-temperature, net-shaped components.

36 MATERIALS SCIENCE↗