Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “assembly processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Process for preparing an assembly of an article and a polyimide which resists dimensional change, delamination and debonding when exposed to changes in temperature

An assembly of an article and a polyimide composition is prepared. The assembly resists dimensional change, delamination, or debonding when exposed to changes in temperature. An article is provided. A polyamic acid solution which yields a polyimide having a low coefficient of thermal expansion (CTE) was prepared. Equimolar quantities of an aromatic diamine and an aromatic dianhydride were reacted in a solvent medium to form a polyamic acid solution. A metal ion-containing additive was added to the solution. Examples of this additive are: TbCl3, DyCl3, ErCl3, TmCl3, Al(C5H7O2)3, and Er2S3. The polyamic acid solution was imidized and is combined with the article to form the assembly.

Stoakley, Diane M.↗
NASA NTRS1989

Hybrid Analog/Digital Receiver

Advanced hybrid analog/digital receiver processes intermediate-frequency (IF) signals carrying digital data in form of phase modulation. Uses IF sampling and digital phase-locked loops to track carrier and subcarrier signals and to synchronize data symbols. Consists of three modules: IF assembly, signal-processing assembly, and test-signal assembly. Intended for use in Deep Space Network, but presumably basic design modified for such terrestrial uses as communications or laboratory instrumentation where signals weak and/or noise strong.

Brown, D. H.↗
DOE OSTI2024

Impacts of Fast Critical Assembly Fuel Discards on Liquid Waste Processes

The Savannah River Nuclear Solutions (SRNS) Fast Critical Assembly (FCA) mission is reestablishing the electrolytic dissolver for processing of Pu and Pu-U materials clad in stainless steel (SS). H-Canyon is planning to dissolve and neutralize FCA fuel without recovering the special nuclear material (i.e., Pu) prior to discarding to the Concentration, Storage, and Transfer Facilities (CSTF) operated by the Savannah River Mission Completion (SRMC) Liquid Waste (LW) Organization. The FCA discards will be combined with sludge in the CSTF after Low Temperature Aluminum Dissolution (LTAD) if needed. The combined waste will be washed, concentrated, and vitrified at the Defense Waste Processing Facility (DWPF). The high level waste canisters produced will be temporarily stored in the Glass Waste Storage Buildings prior to transfer to a future federal repository. Decants from LTAD and sludge washing will be combined with DWPF recycle and dissolved salt cake to prepare salt batches for processing in the Salt Waste Processing Facility. The resulting decontaminated salt solution will be processed in the Saltstone Production Facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Sequence Programmable Order–Disorder Transitions in Supramolecular Assembly of Peptide Nanofibers

Protein–protein interactions determine the assembly of complexes that are responsible for numerous key biological processes. The assembly of many natural protein complexes is mediated by post-translational structural changes and environmental stimuli. In this study, we show that incorporation of adjacent lysine residues results in the pH-tunable stability of peptide secondary structure and assembly, allowing for the incorporation of complementary order-inducing motifs. The strategic placement of cysteine pairs in the same peptide sequence results in redox-dependent disulfide staple formation, inducing a transition from random coil to β-sheet conformation and subsequent supramolecular nanofiber assembly from otherwise disordered peptide monomers. Spectroscopic, imaging, molecular dynamics, and kinetic studies highlight the critical role of sequence motif location, oligomerization, and the competitive interplay between intra- and interpeptide disulfide bonding in determining assembly outcomes. We extend this approach to demonstrate phosphorylation-dependent assembly from the design of the same parent peptide sequence, suggesting a general approach to the design of diverse stimulus-responsive peptide sequences for supramolecular assembly. Furthermore, these findings also provide a framework for investigating sequence-dependent pathways in amyloid fiber formation with potential implications for neurodegenerative disease research.

Disulfides↗
DOE OSTI2025

Shaping Symmetry and Molding Morphology of Triply-Periodic Network Assemblies via Molecular Design and Processing of Block Copolymers

This project aimed to uncover molecular design rules for block copolymer (BCP) assemblies of triply-periodic network (TPN) phases, which are highly sought after, yet elusive, nanostructures for many functional material applications that rely on their combination of symmetry and polycontinuous domain connectivity [R1, R2], such as topological-photonics, supercapacitors and ultrafiltration media. While they have been a target of “bottom up” approaches to nanostructured, hybrid materials, the ability to manipulate the tubular network morphology of TPN assemblies beyond the cubic double-gyroid (DG) phase has advanced relatively little.

36 MATERIALS SCIENCE↗
NASA NTRS1985

The use of analogs in the innovation process - A software engineering protocol analysis

A human information processing account of how experienced practitioners utilize analogs in the innovation process is presented. The protocols of several practitioners are collected and analyzed. The problem behavior graphs, knowledge elements utilized, and operator elements applied are described, and a descriptive model of the innovation process is assembled. Implications for a production system, deviations from other models of the innovation process, and extensions to other models of the analogy procedure are explored.

Silverman, B. G.↗
DOE OSTI2020

DUCTED ASSEMBLY STEADY STATE HEAT TRANSFER SOFTWARE

The Ducted Assembly Steady State Heat transfer software (DASSH) performs full core, steady state, subchannel temperature calculations for hexagonal, ducted assemblies. DASSH is targeted for use in the early stages of the reactor design process when assembly characteristics may not be defined or are undergoing considerable changes. DASSH provides a relatively rapid assessment of the temperature and flow distribution to inform reactor design updates and analysis.

ATZ, MILOSIVO↗
NASA NTRS1998

Continuous Process Involvement

The Electronic Fabrication Section at the Jet Propulsion Laboratories (JPL) has been studying ways to improve Printed Wiring Assembly (PWA) processes. The PWA study described here contained typical surface mount devices including 20 mil fine pitch devices and various BGAs.

surface mount component component lead forming lea↗
NASA NTRS2004

Process for testing a xenon gas feed system of a hollow cathode assembly

The design and manufacturing processes for Hollow Cathode Assemblies (HCA's) that operate over a broad range of emission currents up to 30 Amperes, at low potentials, with lifetimes in excess of 17,500 hours. The processes include contamination control procedures which cover hollow cathode component cleaning procedures, gas feed system designs and specifications, and hollow cathode activation and operating procedures to thereby produce cathode assemblies that have demonstrated stable and repeatable operating conditions, for both the discharge current and voltage. The HCA of this invention provides lifetimes of greater than 10,000 hours, and expected lifetimes of greater than 17,500 hours, whereas the present state-of-the-art is less than 500 hours at emission currents in excess of 1 Ampere. Stable operation is provided over a large range of operating emission currents, up to a 6:1 ratio, and this HCA can emit electron currents of up to 30 Amperes in magnitude to an external anode that simulates the current drawn to a space plasma, at voltages of less than 20 Volts.

Patterson, Michael J.↗
DOE OSTI2021

Ducted Assembly Steady-State Heat Transfer Software (DASSH)

The Ducted Assembly Steady-State Heat transfer software (DASSH) is being developed at Argonne National Laboratory to perform a steady-state thermal fluids calculation to determine the coolant flow and temperature distribution for a hexagonal reactor core configuration with ducted assemblies. DASSH is intended to be used in the early stages of the reactor design process when assembly components can be undefined or are undergoing considerable design changes. DASSH provides a rapid assessment of the temperature and flow distribution to allow quick characterization of the system and identification of problem areas. This document is a guide for DASSH users. It summarizes the core capabilities of DASSH and highlights differences between DASSH and SE2-ANL. Instructions for obtaining and installing DASSH are provided along with some guidelines and recommendations for newer Python users. It covers the structure of the input file, provides directions for running DASSH, describes the various output files produced by the code, and provides instructions for visualizing data. Examples demonstrating various DASSH options are included. DASSH is under active development, so it is anticipated that this guide will grow and evolve as the code is updated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1985

Payload transportation at KSC

Cargo ground processing at John F. Kennedy Space Center (KSC) involves either a horizointal or vertical mode of assembly and processing of the STS payloads. Consequently, cargos are commonly referred to as horizontal or vertical payloads. The process flow for each mode requires different facilities and transportation requirements. Occasionally, a mixed mission cargo containing both horizontal and vertical payload elements will require a combination of horizontal and vertical transportation between facilities. Some of the engineering challenges and innovative solutions to satisy the unique on-site payload transportation requirements at KSC. In particular, some of the more demanding design requirements of the multiuse mission support equipment are presented, and the resulting engineering designs and unique solutions are outlined.

Donahue, M. E.↗
NASA NTRS2011

Support Assembly for Composite Laminate Materials During Roll Press Processing

A composite laminate material is supported during the roll press processing thereof by an assembly having: first and second perforated films disposed adjacent to first and second opposing surfaces of a mixture of uncured resin and fibers defining the composite laminate material, a gas permeable encasement surrounding the mixture and the first and second films, a gas impervious envelope sealed about the gas permeable encasement, and first and second rigid plates clamped about the gas impervious envelope.

Catella, Luke A.↗
NASA NTRS1979

Investigation of Proposed Process Sequence for the Array Automated Assembly Task, Phase 2

The technological readiness of the proposed process sequence was reviewed. Process steps evaluated include: (1) plasma etching to establish a standard surface; (2) forming junctions by diffusion from an N-type polymeric spray-on source; (3) forming a p+ back contact by firing a screen printed aluminum paste; (4) forming screen printed front contacts after cleaning the back aluminum and removing the diffusion oxide; (5) cleaning the junction by a laser scribe operation; (6) forming an antireflection coating by baking a polymeric spray-on film; (7) ultrasonically tin padding the cells; and (8) assembling cell strings into solar circuits using ethylene vinyl acetate as an encapsulant and laminating medium.

Mardesich, N.↗
NASA NTRS1978

The High Resolution Imaging Instrument for HEAO-B

The High Resolution Imaging Instrument for the HEAO-B X-ray Telescope satellite is designed to reproduce images of celestial X-ray sources in the range of 0.2 to 4.0 keV. It provides both imaging and temporal data. The basic detector is a two-stage microchannel plate with a crossed-grid charge detector. Preamplifiers, detector bias supplies, and some processing circuits are colocated with the detector. The remaining electronic circuits are located in a remote central electronic assembly. The processing system is designed for single-photon processing. The imaging data rate is limited to 100 data points per second. Non-imaging total-field count rate is acquired with a maximum dead time of 14 microseconds per event.

Kubierschky, K.↗
NASA NTRS1989

A definition study of the on-orbit assembly operations for the outboard photovoltaic power modules for Space Station Freedom

A concept is described for the assembly of the outboard PV modules for Space Station Freedom. Analysis of the on-orbit assembly operations was performed using CADAM design graphics software. A scenario for assembly using the various assembly equipment, as currently defined, is described in words, tables and illustrations. This work is part of ongoing studies in the area of space station assembly. The outboard PV module and the assembly equipment programs are all in definition and preliminary design phases. An input is provided to the design process of assembly equipment programs. It is established that the outboard PV module assembly operations can be performed using the assembly equipment currently planned in the Space Station Freedom Program.

Sours, Thomas J.↗
NASA NTRS1987

Orbital transfer vehicle concept definition and system analysis study. Volume 4, Appendix A: Space station accommodations. Revision 1

Orbit Transfer Vehicle (OTV) processing at the space station is divided into two major categories: OTV processing and assembly operations, and support operations. These categories are further subdivided into major functional areas to allow development of detailed OTV processing procedures and timelines. These procedures and timelines are used to derive the specific space station accommodations necessary to support OTV activities. The overall objective is to limit impact on OTV processing requirements on space station operations, involvement of crew, and associated crew training and skill requirements. The operational concept maximizes use of automated and robotic systems to perform all required OTV servicing and maintenance tasks. Only potentially critical activities would require direct crew involvement or supervision. EVA operations are considered to be strictly contingency back-up to failure of the automated and robotic systems, with the exception of the initial assembly of Space-Based OTV accommodations at the space station, which will require manned involvement.

Randall, Roger M.↗
NASA NTRS2000

Process for Ignition of Gaseous Electrical Discharge Between Electrodes of a Hollow Cathode Assembly

The design and manufacturing processes for Hollow Cathode Assemblies (HCA's) that operate over a broad range of emission currents up to 30 Amperes, at low potentials, with lifetimes in excess of 17,500 hours. The processes include contamination control procedures which cover hollow cathode component cleaning procedures, gas feed system designs and specifications, and hollow cathode activation and operating procedures to thereby produce cathode assemblies that have demonstrated stable and repeatable operating conditions, for both the discharge current and voltage. The HCA of this invention provides lifetimes of greater than 10,000 hours, and expected lifetimes of greater than 17,500 hours, whereas the present state-of-the-art is less than 500 hours at emission currents in excess of 1 Ampere. Stable operation is provided over a large range of operating emission currents, up to a 6:1 ratio, and this HCA can emit electron currents of up to 30 Amperes in magnitude to an external anode that simulates the current drawn to a space plasma, at voltages of less than 20 Volts.

Patterson, Michael J.↗