Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “annihilation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nonlocal effects from boosted dark matter in indirect detection

Here, indirect dark matter (DM) detection typically involves the observation of standard model (SM) particles emerging from DM annihilation/decay inside regions of high dark matter concentration. We consider an annihilation scenario in which this reaction has to be initiated by one of the DMs involved being boosted while the other is an ambient nonrelativistic particle. This “trigger” DM must be created, for example, in a previous annihilation or decay of a heavier component of DM. Remarkably, boosted DM annihilating into gamma rays at a specific point in a galaxy could actually have traveled from its source at another point in the same galaxy or even from another galaxy. Such a “nonlocal” behavior leads to a nontrivial dependence of the resulting photon signal on the galactic halo parameters, such as DM density and core size, encoded in the so-called “astrophysical” J-factor. These nonlocal J-factors are strikingly different than the usual scenario. A distinctive aspect of this model is that the signal from dwarf galaxies relative to the Milky Way tends to be suppressed from the typical value to various degrees depending on their characteristics. This feature can thus potentially alleviate the mild tension between the DM annihilation explanation of the observed excess of approximately GeV photons from the Milky Way’s Galactic Center vs the apparent nonobservation of the corresponding signal from dwarf galaxies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Searching for MeV-mass neutrinophilic dark matter with large scale dark matter detectors

The indirect detection of dark matter (DM) through its annihilation products is one of the primary strategies for DM detection. One of the least constrained classes of models is neutrinophilic DM, because the annihilation products, weakly interacting neutrinos, are challenging to observe. Here, we consider a scenario where MeV-mass DM exclusively annihilates to the third neutrino mass eigenstate, which is predominantly of tau and muon flavor. In such a scenario, the potential detection rate of the neutrinos originating from the DM annihilation in our Galaxy in the conventional detectors would be suppressed by up to approximately two orders of magnitude. This is because the best sensitivity of such detectors for neutrinos with energies below approximately 100 MeV is for electron neutrino flavor. In this work, we highlight the potential of large-scale DM detectors in uncovering such signals in the tens of MeV range of DM masses. In addition, we discuss how coincident signals in direct detection DM experiments and upcoming neutrino detectors such as DUNE, Hyper-Kamiokande, and JUNO could provide new perspectives on the DM problem. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Search for GeV-scale dark matter from the Galactic Center with IceCube-DeepCore

Models describing dark matter as a novel particle often predict that its annihilation or decay into Standard Model particles could produce a detectable neutrino flux in regions of high dark matter density, such as the Galactic Center. In this work, we search for these neutrinos using ∼9 years of IceCube-DeepCore data with an event selection optimized for energies between 15 to 200 GeV. We considered several annihilation and decay channels and dark matter masses ranging from 15 GeV up to 8 TeV. No significant deviation from the background expectation from atmospheric neutrinos and muons was found. The most significant result was found for a dark matter mass of 201.6 GeV annihilating into a pair of bb¯ quarks assuming the Navarro–Frenk–White halo profile with a post-trial significance of 1.08σ. We present upper limits on the thermally averaged annihilation cross section of the order of 10-24 cm3 s-1, as well as lower limits on the dark matter decay lifetime up to 1026 s for dark matter masses between 5 GeV up to 8 TeV. These results strengthen the current IceCube limits on dark matter masses above 20 GeV and provide an order of magnitude improvement at lower masses. In addition, they represent the strongest constraints from any neutrino telescope on GeV-scale dark matter and are among the world-leading limits for several dark matter scenarios.

Abbasi, R↗
NASA NTRS1974

Analysis of the 0.511 MeV radiation at the OSO-7 satellite

Observations of the 0.511 MeV positron annihilation, gamma ray on the OSO-7 satellite are presented. Variables which affect the counting rate are discussed. An upper limit flux of .0076 photons/sq cm/sec is obtained for the quiet sun and a positive solar flux of .063(+ or - .0002) photons/sq cm/sec is obtained for the 3B flare of 4 August 1972. The width of this annihilation line gives an upper limit temperature for the annihilation region of approximately 6 million K. An analysis of the line width and position also shows that the contribution to the line from positronium annihilation is less than 100% at the 99% confidence level. An upper limit is also found for an isotropic cosmic flux.

Dunphy, P. P.↗
NASA NTRS1976

Formation of the 0.511.-MeV line in solar flares

The gamma-ray line produced at 0.51-MeV was studied and is shown to be the result of either of free annihilation of positrons with electrons or of the decay of positronium by 2-photon emission. Positron annihilation from the bound state of positronium may also proceed by 3-photon emission, resulting in a continuum with energies up to 0.51-MeV. Accurate calculations of the rates of free annihilation and positronium formation in a solar-flare plasma are presented. Estimates of the positronium-formulation rates by charge exchange and the rates of dissociation and quenching are also considered. The temperature and density dependence of the ratio of 3-photon to 2-photon emission was obtained. It is shown that when the ratio of free electrons to neutral atoms in the plasma is approximately unity or greater, the Doppler width of the 0.51-MeV line is a function of the temperature of the annihilation region. For the small ion densities characteristics of the photosphere, the width is predominantly a function of the density.

Crannell, C. J.↗
NASA NTRS1978

A phenomenological model of solar flares

The energy of solar flares is derived from the magnetic energy of fields convected to the sun's surface and subsequently converted to heat and energetic particles within the chromosphere. The circumstances of this conversion in most current models is magnetic flux annihilation at a neutral sheet. An analysis is conducted of the constraints of flux annihilation. It is shown that the present evidence of solar cosmic rays, X-rays, gamma-rays, and total energy suggests a choice of annihilation not at a neutral point, but by an enhanced dissipation of a field-aligned current. The field configuration is related both to its origin and to the extensive theory and laboratory experiments concerned with this configuration in magnetic fusion. The magnetic field model is applied to the August 4 flare. It is shown how the plasma heating in the annihilation region balanced by thermal conduction leads to a plasma temperature of about 20 million deg K.

Colgate, S. A.↗
NASA NTRS1989

Antiproton powered propulsion with magnetically confined plasma engines

Matter-antimatter annihilation releases more energy per unit mass than any other method of energy production, making it an attractive energy source for spacecraft propulsion. In the magnetically confined plasma engine, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas. The resulting charged annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. The calculated energy transfer efficiencies for a low number density (10(14)/cu cm) hydrogen propellant are insufficient to warrant operating the engine in this mode. Efficiencies are improved using moderate propellant number densities (10(16)/cu cm), but the energy transferred to the plasma in a realistic magnetic mirror system is generally limited to less than 2 percent of the initial proton-antiproton annihilation energy. The energy transfer efficiencies are highest for high number density (10(18)/cu cm) propellants, but plasma temperatures are reduced by excessive radiation losses. Low to moderate thrust over a wide range of specific impulse can be generated with moderate propellant number densities, while higher thrust but lower specific impulse may be generated using high propellant number densities. Significant mass will be required to shield the superconducting magnet coils from the high energy gamma radiation emitted by neutral pion decay. The mass of such a radiation shield may dominate the total engine mass, and could severely diminish the performance of antiproton powered engines which utilize magnetic confinement. The problem is compounded in the antiproton powered plasma engine, where lower energy plasma bremsstrahlung radiation may cause shield surface ablation and degradation.

Lapointe, Michael R.↗
NASA NTRS1989

Antiproton powered propulsion with magnetically confined plasma engines

The reaction of the matter-antimatter annihilation, with its specific energy being over 250 times the specific energy released in nuclear fusion, is considered as an energy source for spacecraft propulsion. A concept of a magnetically confined pulsed plasma engine is described. In this concept, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas; the resulting charge annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. Numerical simulations were developed to calculate the annihilation rate of antiprotons in hydrogen and to follow the resulting ion, muon, and electron/positron number density evolutions.

Lapointe, Michael R.↗
NASA NTRS2012

Search for Dark Matter Satellites Using the Fermi-Lat

Numerical simulations based on the ACDM model of cosmology predict a large number of as yet unobserved Galactic dark matter satellites. We report the results of a Large Area Telescope (LAT) search for these satellites via the gamma-ray emission expected from the annihilation of weakly interacting massive particle (WIMP) dark matter. Some dark matter satellites are expected to have hard gamma-ray spectra, finite angular extents, and a lack of counterparts at other wavelengths. We sought to identify LAT sources with these characteristics, focusing on gamma-ray spectra consistent with WIMP annihilation through the bb(sup raised bar) channel. We found no viable dark matter satellite candidates using one year of data, and we present a framework for interpreting this result in the context of numerical simulations to constrain the velocity-averaged annihilation cross section for a conventional 100 Ge V WIMP annihilating through the bb(sup raised bar) channel.

Ackermann, M.↗
DOE OSTI2026

Getting Warmer: IceCube Nears Freeze Out

IceCube has recently detected a diffuse population of high-energy neutrinos arising from the Milky Way. We use this high-significance detection to place new limits on dark matter (DM) annihilation to neutrinos with two complementary approaches. The first method uses the background-subtracted Galactic longitude distribution of shower events to place a conservative bound on the DM annihilation cross section that does not rely on any assumed Galactic cosmic ray emission model; the resulting limits on the velocity-averaged annihilation cross section improve upon existing bounds by factors of a few. The second method uses the template-dependent neutrino energy spectra from the Inner Galaxy, inferred under different Galactic cosmic ray emission models. This complementary approach shows that the inferred Galactic neutrino intensities are already sensitive to DM contributions near the thermal-relic benchmark for a range of TeV-scale DM masses, though this comparison is more model-dependent. Our results demonstrate that measurements of diffuse Galactic neutrino emission can be used as a powerful probe of DM annihilation into neutrinos. Future observations with IceCube-Gen2 and KM3NeT will substantially extend this sensitivity, potentially allowing a decisive test of the thermal freeze-out mechanism with Galactic neutrino observations.

Mukhopadhyay, Mainak [Fermilab; Chicago U., KICP; ↗
DOE OSTI2023

Dynamic Motions of Topological Defects in Nematic Liquid Crystals under Spatial Confinement

Abstract Topological defects (TDs) have become a sensational topic due to their significant influence on the unusual optical and physiochemical characteristics of the material. To facilitate their application across a wide range of disciplines it is desirable to analyze and gain fundamental understanding of TDs in both equilibrium and nonequilibrium systems. Liquid crystals (LCs) are considered an ideal system for study given the direct visualization of TDs and a straightforward analyzation process. In addition to the equilibrium morphology of LC TDs, it is also of great interest to track and control the formation and annihilation of defects during thermodynamic processes. However, controlling the dynamic behavior of formed defects remains a challenge. Here, nematic LCs confined in a cell exhibiting surfaces with periodic anchoring conditions containing surface topography are relied on. The effects of patterned surface characteristics such as width, periodicity, and degree of curvature on defects dynamic motion, stabilization, and annihilation are explored. The computational experiments recapitulate the TDs transition path and provide free energy‐based predictions of critical distances for defect annihilation. Taken together, this simple approach offers a promising opportunity to control the dynamics of TDs in LCs through chemical patterned surfaces with topography.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Photochemical Upconversion in Water Using Cu(I) MLCT Excited States: Role of Energy Shuttling at the Micellar/Water Interface

Photochemical upconversion (UC) through triplet–triplet annihilation (TTA), which employs a visible absorbing triplet photosensitizer and an annihilator, is a process that generates a high energy photon from two lower energy photons. TTA-UC has been largely developed in pure organic solvents and solid-state polymeric constructs while featuring near exclusive use of rare and expensive metals within the photosensitizer. In this current investigation, we demonstrate that TTA-UC from the long lifetime earth-abundant photosensitizer [Cu(dsbtmp) 2 ](PF) 6 (dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline), abbreviated as Cu-PS, functions in water through encapsulation within a cationic-based assembly. Cetyltrimethylammonium bromide was the surfactant of choice as it electrostatically binds the negatively charged water-soluble 10-phenylanthracene-9-carboxylate (PAC) acceptor/annihilator and ultimately facilitates energy transfer across the interface. Efficient triplet–triplet energy transfer (TTET) from Cu-PS to the PAC acceptor was achieved in this aqueous assembly. Unfortunately, the hindered mobility of the PAC moieties ultimately hampered the annihilation process, and this was reflected in attenuated TTA rates and efficiencies. The combined experimental data illustrated that the water-soluble PAC acceptor was able to vectorially deliver the excited-state energy stored in Cu-PS across the interface into the bulk aqueous solution by engaging in excited-state electron transfer with methyl viologen acceptors. Lastly, these results are important for remotely operating photoredox reactions in water while rendering a photosensitizer spatially isolated in the hydrophobic core of a micelle.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Diode effect for skyrmions interacting with linear protrusion defects

We simulate collectively interacting skyrmions in a channel with periodic asymmetry, and find a strong diode effect for the skyrmion flow. There is also an asymmetry in the skyrmion annihilation rate for currents applied along the hard or easy substrate asymmetry direction, with a higher annihilation rate for hard direction currents. We map out the diode efficiency as a function of magnetic field and substrate asymmetry angle. We also show that the Magnus force impacts the diode motion and annihilation rate asymmetry by forcing skyrmions into corners of the protrusion geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dark Matter searches with photons at the LHC

We unveil blind spot regions in dark matter (DM) direct detection (DMDD), for weakly interacting massive particles with a mass around a few hundred GeV that may reveal interesting photon signals at the LHC. We explore a scenario where the DM primarily originates from the singlet sector within the Z 3 -symmetric Next-to-Minimal Supersymmetric Standard Model (NMSSM). A novel DMDD spin-independent blind spot condition is revealed for singlino-dominated DM, in cases where the mass parameters of the higgsino and the singlino-dominated lightest supersymmetric particle (LSP) exhibit opposite relative signs (i.e., κ < 0), emphasizing the role of nearby bino and higgsino-like states in tempering the singlino-dominated LSP. Additionally, proximate bino and/or higgsino states can act as co-annihilation partner(s) for singlino-dominated DM, ensuring agreement with the observed relic abundance of DM. Remarkably, in scenarios involving singlino-higgsino co-annihilation, higgsino-like neutralinos can distinctly favor radiative decay modes into the singlino-dominated LSP and a photon, as opposed to decays into leptons/hadrons. In exploring this region of parameter space within the singlino-higgsino compressed scenario, we study the signal associated with at least one relatively soft photon alongside a lepton, accompanied by substantial missing transverse energy (E T ) and a hard initial state radiation jet at the LHC. In the context of singlino-bino co-annihilation, the bino state, as the next-to-LSP, exhibits significant radiative decay into a soft photon and the LSP, enabling the possible exploration at the LHC through the triggering of this soft photon alongside large E T and relatively hard leptons/jets resulting from the decay of heavier higgsino-like states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

QCD-collapsed domain walls: QCD phase transition and gravitational wave spectroscopy

Abstract For a discrete symmetry that is anomalous under QCD, the domain walls produced in the early universe from its spontaneous breaking can naturally annihilate due to QCD instanton effects. The gravitational waves generated from wall annihilation have their amplitude and frequency determined by both the discrete symmetry breaking scale and the QCD scale. The evidence of stochastic gravitational waves at nanohertz observed by pulsar timing array experiments suggests that the discrete-symmetry-breaking scale is around 100 TeV, assuming the domain-wall explanation. The annihilation temperature is about 100 MeV, which could naturally be below the QCD phase transition temperature. We point out that the QCD phase transition within some domains with an effective large QCDθangle could be a first-order one. To derive the phase diagram inθand temperature, we adopt a phenomenological linear sigma model with three quark flavors. The domain-wall explanation for the NANOGrav, EPTA, PPTA and CPTA results hints at a first-order QCD phase transition, which predicts additional gravitational waves at higher frequencies. If the initial formation of domain walls is also a first-order process, this class of domain-wall models predicts an interesting gravitational wave spectroscopy with frequencies spanning more than ten orders of magnitude, from nanohertz to 100 Hz.

Physics↗
DOE OSTI2020

Anthracene Diphosphate Ligands for CdSe Quantum Dots; Molecular Design for Efficient Upconversion

Quantum dot (QD)-sensitized photon upconversion follows a multi-step energy transfer process from the QD to transmitter ligand to a soluble annihilator. Using a novel 10-R-anthracene-1,8-diphosphoric acid (R = octyl, 2- hexyldecyl, phenyl) ligand with high binding affinity for CdSe QD surfaces, we demonstrate a photon upconversion process that is limited by the transmitter to annihilator transfer efficiency. Using 1 H NMR spectroscopy, we demonstrate that these bidentate diphosphate ligands rapidly and irreversibly displace two carboxylate ligands. These ligands mediate energy transfer from the photoexcited QDs to a triplet annihilator (1,10-diphenylanthracene), producing overall photon upconversion quantum efficiencies as high as 17%, the highest for QDs with no shells. In conclusion, transient absorption spectroscopy shows that the anthracene dihydrogen phosphate (ADP) ligand supports a 3.4 fold longer triplet state lifetime compared to 9-anthracene carboxylic acid (299.9 ± 9.5 vs 88.2 ± 2.1 μs), increasing the probability of energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High efficiency deep red to yellow photochemical upconversion under solar irradiance

Here, the performance of a perylene monoimide annihilator is evaluated in a photochemical upconversion composition. It is found to perform up to five times better than the commonly employed rubrene annihilator at low excitation intensity, but suffers from a low annihilation singlet yield which hinders its performance under strong excitation. Upconversion action spectroscopy under broadband bias reveals that under one sun illumination, an upconversion composition employing the perylene monoimide utilizes more than 12% of the generated triplet states to generate emissive, excited singlet states. In a suitable medium, this composition could enhance the energy conversion efficiency of high band gap solar cells.

14 SOLAR ENERGY↗