Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “amorphization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Connection between the physicochemical characteristics of amorphous carbon thin films and their electrochemical properties

Connecting a material's surface chemistry with its electrocatalytic performance is one of the major questions in analytical electrochemistry. This is especially important in many sensor applications where analytes from complex media need to be measured. Unfortunately, today this connection is still largely missing except perhaps for the most simple ideal model systems. Here we present an approach that can be used to obtain insights about this missing connection and apply it to the case of carbon nanomaterials. In this paper we show that by combining advanced computational techniques augmented by machine learning methods with x-ray absorption spectroscopy (XAS) and electrochemical measurements, it is possible to obtain a deeper understanding of the correlation between local surface chemistry and electrochemical performance. As a test case we show how by computationally assessing the growth of amorphous carbon (a-C) thin films at the atomic level, we can create computational structural motifs that may in turn be used to deconvolute the XAS data from the real samples resulting in local chemical information. Then, by carrying out electrochemical measurements on the same samples from which x-ray spectra were measured and that were further characterized computationally, it is possible to gain insight into the interplay between the local surface chemistry and electrochemical performance. To demonstrate this methodology, we proceed as follows: after assessing the basic electrochemical properties of a-C films, we investigate the effect of short HNO 3 treatment on the sensitivity of these electrodes towards an inner sphere redox probe dopamine to gain knowledge about the influence of altered surface chemistry to observed electrochemical performance. Overall, these results pave the way towards a more general assessment of electrocatalysis in different systems and provide the first steps towards data driven tailoring of electrode surfaces to gain optimal performance in a given application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Minimal cyclic behavior in sheared amorphous solids

Although jammed packings of soft spheres exist in potential energy landscapes with a vast number of minima, when subjected to cyclic shear they may revisit the same configurations repeatedly. Simple hysteretic spin models, in which particle rearrangements are represented by interacting spin flips called hysterons, capture many features of this periodic behavior. Yet it has been unclear to what extent individual rearrangements can be described by such binary objects and how such objects interact with one another. Using a particularly sensitive algorithm, we identify rearrangements in simulated jammed packings and select pairs of rearrangements that undo one another to create periodic cyclic behavior. We find that the rearrangement pairs surprisingly persist down to the smallest increments in strain, even in the smallest systems we can study. We explore the statistics of these rearrangement pairs and find that there is a relation between the amount of hysteresis and the energy drop and mean-square displacement of the particles; these results are inconsistent with the scaling found in models that treat rearrangements as localized buckling events. Finally, our analysis shows that there is no clean distinction between the particle motions that represent the identity of a single, individual rearrangement and the particle motions that lead to interactions between separated rearrangements or hysterons. These results offer insight into how complex systems such as amorphous solids can reach a limit cycle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Characterization of lateral amorphous selenium photodetectors for low-photon and VUV detection at cryogenic temperatures

The performance of amorphous selenium (a-Se) as a cryogenic photodetector material is evaluated through a series of experiments using laterally structured devices operated in a custom optical test stand. These studies investigate the response of a-Se detectors to low-photon fluxes at high electric fields near avalanche conditions, the linearity of the photoconductive response over a wide dynamic range and the direct detection of narrowband 130 nm vacuum ultraviolet (VUV) illumination. At 87 K, matched-filter analysis shows reliable single-shot detection with efficiencies ≥80% and area under the curve (AUC) ≥ 0.85 using as few as ∼ 6800 incident 401 nm photons, corresponding to ∼ 3400 photons within field-active regions after accounting for geometric constraints. Measurements are performed at cryogenic temperatures using calibrated photon fluxes derived from a silicon photomultiplier reference and a characterized optical filter stack. Additional experiments using a tellurium-doped a-Se (a-SeTe) device explore the material's behavior under identical test conditions and demonstrate that avalanche is achievable in a-SeTe at cryogenic temperatures. The results demonstrate reproducible low-noise operation, VUV sensitivity and field-dependent gain behavior in a lateral a-Se architecture, representing the first reported observation of avalanche multiplication in laterally structured a-Se and a-SeTe devices at cryogenic temperatures. These findings support the potential integration of laterally structured a-Se devices into next-generation pixelated liquid-argon time projection chambers (TPCs) requiring scalable, high-field-compatible photon detection systems.

Amorphous selenium↗
DOE OSTI2022

Reversible motions and disordered structure of soft particles in amorphous solids

In amorphous solids, soft vibrational modes derived from normal mode analysis can be utilized to identify the soft particles that are prone to irreversible rearrangements. However, the normal mode analysis approach cannot explain why the spatial distributions of clustered soft particles do not change over time. We define a softness parameter based on the vibrational density of states calculated directly from molecular dynamics simulations with both the harmonic vibrations and anharmonic relaxations being properly captured at finite temperatures. This parameter spontaneously correlates with the real space atomic motions and the dynamics heterogeneity. Using the softness parameter, we show that the softest particles are confined within rigid cages. These particles keep rearranging reversibly without long-range diffusion. The moderately soft particles rearrange irreversibly, and the hard particles mainly participate in vibrations without rearrangement. Here, we also show that the soft particles form locally disordered structures, while the hard particles present strong ordering. These findings confirm the defective nature of soft particles, and provide insights on the nature of softness as the ability to rearrange, but not necessarily irreversibly.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Density changes in amorphous silicon induced by swift heavy ions

For this study, pure and gold-doped amorphous silicon membranes were irradiated with swift heavy ions (75 MeV Ag or 1.1 GeV Au ions) and studied using small-angle x-ray scattering. The samples that were irradiated with 1.1 GeV Au ions produced a scattering pattern consistent with core-shell-type ion tracks of 2.0 ± 0.1 nm (core) and 7.0 ± 0.3 nm (total) radius irrespective of gold doping, consistent with radii previously observed. The density in the core is nearly 4% different from that of the surrounding material. The entire track (core + shell) is slightly less dense than the surrounding material, yielding an expansion or hammering constant A of 0.036 ± 0.003 nm 2 per ion track, consistent with the macroscopic “hammering” deformation. No tracks were found in samples irradiated with 75 MeV Ag ions, and no signature specific to the gold impurity doping could be observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

The Debye-Waller factor of disordered solids: The case for amorphous silicon

This paper presents a first-principles study of the Debye-Waller factor and the Debye temperature for amorphous silicon (α-Si) from lattice-dynamical calculations and direct molecular-dynamics simulations using density-functional theory (DFT). The effects of temperature and structural disorder on the intensity of the diffraction maxima and the vibrational mean-square displacement (MSD) of Si atoms are studied in the harmonic approximation, with particular emphasis on the bond-length disorder, the presence of coordination defects, and microvoids in α-Si networks. It has been observed that the MSDs associated with tetrahedrally bonded Si atoms are considerably lower than their dangling-bond counterparts—originating from isolated and vacancy-induced clustered defects—and those on the surface of microvoids, leading to an asymmetric non-Gaussian tail in the distribution of atomic displacements. An examination of the effect of anharmonicity on the MSD at high temperatures using direct ab initio molecular-dynamics simulations (without the harmonic approximation) suggests that the vibrational motion in α-Si is practically unaffected by anharmonic effects at temperatures below 400 K, as far as the present DFT calculations are concerned. The Debye temperature of α-Si is found to be in the range of 488–541 K from specific-heat and MSD calculations using first-principles lattice-dynamical calculations in the harmonic approximation, which matches closely with the experimental value of 487–528 K obtained from specific-heat measurements of α-Si at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Persistence of negative vacancy and self-interstitial formation energies in atomistic models of amorphous silicon

We use classical potential atomistic modeling to demonstrate that negative vacancy and selfinterstitial formation energies are inherently present in amorphous silicon (a-Si). Our conclusions are based on comprehensive calculations of vacancy and self-interstitial formation energies in nine different models, ranging in size from 1000 to 2744 atoms and formed by quenching liquid Si at rates between 10 10 and 10 12 K/s. We account for a range of possible reference energies corresponding to different choices of reservoirs for atoms inserted into or removed from our models. Moreover, we show that successive addition of either vacancies or self-interstitials does not deplete the number of negative formation energy sites. Instead, it further lowers defect formation energies. Furthermore, these findings lead us to conclude that a-Si is not a structure at or near a local enthalpy minimum nor can it be brought to a local enthalpy minimum through the introduction of constitutional defects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Amorphous Indium Oxide Channel FEFETs With Write Voltage of 0.9 V and Endurance >10 12 for Refresh-Free Embedded Memory

This work presents, for the first time, a back-end-of-the-line (BEOL)-compatible W-doped indium oxide (IWO) ferroelectric field-effect transistor (FEFET) with a record-low operating voltage below 0.9 V and a write speed of 20 ns while achieving a transient read current window (CW) ratio ( I LVT /I HVT ) greater than 10 4 . The device also exhibits exceptional reliability characteristics such as: 1) measured bipolar write endurance up to 10 12 cycles; 2) a fast read speed of 50 ns; 3) read endurance surpassing 10 12 cycles; and 4) retention exceeding 10 4 s at 85 ∘ C. Furthermore, a physics-based numerical model has been developed to investigate the nanoscale characteristics of BEOL FEFET devices, leveraging nucleation-limited switching in HfO 2 ferroelectrics and dc characterization to extract material and channel parameters for accurate device simulation. The simulation uncovers the stochastic switching behavior of BEOL amorphous oxide semiconductor (AOS) FEFETs and demonstrates an intrinsic switching time as low as 1 ps, highlighting the potential of BEOL AOS FEFETs for ultrafast memory applications. These results establish AOS FEFETs as a compelling candidate for high-density embedded memory applications for last-level cache (LLC) (L4) in advanced CMOS technology nodes.

1-V ferroelectric field-effect transistor (FEFET)↗
DOE OSTI2021

Addressing amorphization and transgranular fracture of B 4 C through Si doping and TiB 2 microparticle reinforcing

Over the last two decades, many studies have contributed to improving our understanding of the brittle failure mechanisms of boron carbide and provided a road map for inhibiting the underlying mechanisms and improving the mechanical response of boron carbide. This paper provides a review of the design and processing approaches utilized to address the amorphization and transgranular fracture of boron carbide, which are mainly based on what we have found through 9 years of work in the field of boron carbides as armor ceramics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Strength distributions of laminated FeNi-based metal amorphous nanocomposite ribbons

Metal Amorphous Nanocomposite (MANC) materials offer low losses at high magnetic switching frequency, enabling high power density motors with increased rotational speed. While MANCs have high strength, they are brittle. The use of motor components such as a rotor consisting of brittle material presents a reliability concern. Here, a promising MANC alloy is subjected to tensile tests and failure is observed with high-speed photography. A method is developed to prepare tensile specimens of laminated MANC and epoxy layers, simulating the stacking of an epoxy-impregnated tape-wound core. Tensile tests are conducted for single layer ribbon and for five- and ten-layer stacks of laminated material with thin layers of thermosetting epoxy. Failure distributions are shown to have increasing Weibull modulus with increasing layer count. The composite MANC material system is modeled using chain-of-bundles models. Using a k-failure model, we show that single ribbon strength distribution data can be used to predict well the failure distribution of laminated stacks. The agreement occurs when the assumed ineffective length, over which load is recovered in a failed layer, is comparable to the observed interlaminar separation length.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Materials laboratories of the future for alloys, amorphous, and composite materials

In alignment with the Materials Genome Initiative and as the product of a workshop sponsored by the US National Science Foundation, we define a vision for materials laboratories of the future in alloys, amorphous materials, and composite materials; chart a roadmap for realizing this vision; identify technical bottlenecks and barriers to access; and propose pathways to equitable and democratic access to integrated toolsets in a manner that addresses urgent societal needs, accelerates technological innovation, and enhances manufacturing competitiveness. Spanning three important materials classes, this article summarizes the areas of alignment and unifying themes, distinctive needs of different materials research communities, key science drivers that cannot be accomplished within the capabilities of current materials laboratories, and open questions that need further community input. Here, we provide a broader context for the workshop, synopsize the salient findings, outline a shared vision for democratizing access and accelerating materials discovery, highlight some case studies across the three different materials classes, and identify significant issues that need further discussion.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of high B s Fe–Ni-based metal amorphous nanocomposite by optimization of glass-forming ability

Thermocalc simulations identified compositions with good glass-forming ability (GFA) by locating minima in liquidus temperature, and solidification range in (Fe 70 Ni 30 ) x (B-Si-Nb) 100-x alloys with x = 82% and x = 85%, increased compared to previously developed x = 80% alloys. 3 compositions in the x = 82% system and 1 in the x = 85% system were successfully cast as amorphous magnetic ribbon. Magnetic properties of as-cast alloys showed improvements in Curie temperature and saturation induction, especially for the 85% alloy. Crystallization behavior in the 85% alloy was determined to occur as a 2-step process. Annealing studies showed (Fe 70 Ni 30 ) 82 Nb 2 Si 0 B 16 and (Fe 70 Ni 30 ) 82 Nb 3 Si 0 B 15 alloys to exhibit low coercivity and high B s with annealing. TEM results show significant crystallization in as-cast ribbon. The (Fe 70 Ni 30 ) 85 Nb 0.5 Si 0 B 14.5 alloy as-cast has small, uniformly distributed grains, allowing a useful nanocrystalline alloy to be produced as cast. Lastly, the parameter ΔT xg , the temperature range in which the material can be thermomechanically processed, was in the range of 12–23 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural analyses of amorphous calcium carbonate before and after removing strontium ions from an aqueous solution

Amorphous calcium carbonate (ACC) is a precursor of crystalline calcium carbonate; hence, its structural information at the atomic level is very important for controlling the morphology of crystalline calcium carbonate. In this study, we attempted to elucidate the process of Sr extraction from aqueous solution by using ACC for the purpose of removal of radioactive Sr from the contaminated water leaked after the Fukushima Daiichi nuclear accident. Here, the pair distribution functions, g(r) obtained by X-ray and neutron diffraction (ND) measurements show that ACC has a structure partially similar to that of monohydrocalcite, suggesting that ACC is transferred to the crystalline calcium carbonate starting from its crystal nucleus. Rietveld analysis of the ND data showed that the ACC that removed Sr was crystallized to calcite. However, the Sr–O coordination analyzed using extended X-ray absorption fine structure (EXAFS) implies that the local environment of O around Sr is similar to that in crystalline calcium carbonate aragonite.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Review of Advanced Characterization Methods and Techniques for Amorphous and Poorly Crystalline Materials Applicable to Cementitious Waste Forms

This review covers advanced characterization methods of cementitious materials. The particular focus is to understand cementitious compositions with amorphous content because conventional techniques such as X-ray diffraction are more applicable to materials with long range order. Also of interest is advanced characterization that provides deeper insights into properties such as porosity. There are five groups of characterization methods discussed in this review which are: electron beam/microscopy, X-ray, neutron diffraction and scattering, nuclear magnetic resonance, and optical techniques. The techniques can be further grouped by the categories of nanoscale structural understanding (transmission electron microscopy and pair distribution function), microscale structural understanding (focused ion beam and x-ray tomography), microscopic elemental distributions (energy dispersive spectroscopy and X-ray fluorescence), and chemical binding information (electron energy loss spectroscopy, x-ray absorption spectroscopy, nuclear magnetic resonance, Raman spectroscopy, and infrared spectroscopy), with advantages and disadvantages of each method discussed. The recommendation for further research is to begin with techniques that are easier to prepare samples for, measure, and analyze, such as the optical techniques of Raman and infrared spectroscopy. If more information is needed, pursue collaborations, other techniques, or proposals for beam time at the synchrotron sources.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Ultrathin Amorphous Silica Membrane Enhances Proton Transfer across Solid-to-Solid Interfaces of Stacked Metal Oxide Nanolayers while Blocking Oxygen

A large jump of proton transfer rates across solid-to-solid interfaces by inserting an ultrathin amorphous silica layer into stacked metal oxide nanolayers is discovered using electrochemical impedance spectroscopy and Fourier-transform infrared reflection absorption spectroscopy (FT-IRRAS). The triple stacked nanolayers of Co 3 O 4 , SiO 2 , and TiO 2 prepared by atomic layer deposition (ALD) enable a proton flux of 2400 ± 60 s -1 nm -2 (pH 4, room temperature), while a single TiO 2 (5 nm) layer exhibits a threefold lower flux of 830 s -1 nm -2 . Based on FT-IRRAS measurements, this remarkable enhancement is proposed to originate from the sandwiched silica layer forming interfacial SiOTi and SiOCo linkages to TiO 2 and Co 3 O 4 nanolayers, respectively, with the O bridges providing fast H + hopping pathways across the solid-to-solid interfaces. Finally, together with the complete O 2 impermeability of a 2 nm ALD-grown SiO 2 layer, the high flux for proton transport across multi-stack metal oxide layers opens up the integration of incompatible catalytic environments to form functional nanoscale assemblies such as artificial photosystems for CO 2 reduction by H 2 O.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reversible Nanocomposite by Programming Amorphous Polymer Conformation Under Nanoconfinement

Nanoconfinements are utilized to program how polymers entangle and disentangle as chain clusters to engineer pseudo bonds with tunable strength, multivalency, and directionality. When amorphous polymers are grafted to nanoparticles that are one magnitude larger in size than individual polymers, programming grafted chain conformations can "synthesize" high-performance nanocomposites with moduli of ≈25GPa and a circular lifecycle without forming and/or breaking chemical bonds. These nanocomposites dissipate external stresses by disentangling and stretching grafted polymers up to ≈98% of their contour length, analogous to that of folded proteins; use both polymers and nanoparticles for load bearing; and exhibit a non-linear dependence on composition throughout the microscopic, nanoscopic, and single-particle levels.

Chen, Tiffany↗
DOE OSTI2020

Gel‐Derived Amorphous Bismuth–Nickel Alloy Promotes Electrocatalytic Nitrogen Fixation via Optimizing Nitrogen Adsorption and Activation

Abstract To achieve the electrochemical nitrogen reduction reaction (NRR) for efficient and sustainable NH 3 production, catalysts should exhibit high selectivity and activity with optimal adsorption energy. Herein we developed a three‐dimensional (3D) amorphous BiNi alloy toward a significantly enhanced NRR compared with its crystalline and metal counterparts. Ni alloying enables the chemisorption of nitrogen and the lower free‐energy change for the *NNH formation, and the 3D alloy electrocatalyst exhibits high catalytic activity for NH 3 production with a yield rate of 17.5 μg h −1 mg cat −1 and Faradaic efficiency of 13.8 %. The enhanced electron transfer and increased electrochemical surface area were revealed in the interconnected porous scaffold, affording it sufficiently efficient and stable activity for potential practical applications. This work offers new insights into optimizing the adsorption energy of reactants and intermediates combined with tuning the crystallinity of NRR electrocatalysts.

Fang, Zhiwei↗
DOE OSTI2020

Gel-Derived Amorphous Bismuth–Nickel Alloy Promotes Electrocatalytic Nitrogen Fixation via Optimizing Nitrogen Adsorption and Activation

To achieve the electrochemical nitrogen reduction reaction (NRR) for efficient and sustainable NH 3 production, catalysts should exhibit high selectivity and activity with optimal adsorption energy. Herein we developed a three-dimensional (3D) amorphous BiNi alloy toward a significantly enhanced NRR compared with its crystalline and metal counterparts. Ni alloying enables the chemisorption of nitrogen and the lower fre-energy change for the *NNH formation, and the 3D alloy electrocatalyst exhibits high catalytic activity for NH 3 production with a yield rate of 17.5 μg h -1 mg cat -1 and Faradaic efficiency of 13.8 %. The enhanced electron transfer and increased electrochemical surface area were revealed in the interconnected porous scaffold, affording it sufficiently efficient and stable activity for potential practical applications. Furthermore, this work offers new insights into optimizing the adsorption energy of reactants and intermediates combined with tuning the crystallinity of NRR electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗