Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active lattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Extremely Overdoped Superconducting Cuprates via High Pressure Oxygenation Methods

Within the cuprate constellation, one fixed star has been the superconducting dome in the quantum phase diagram of transition temperature vs. the excess charge on the Cu in the CuO2-planes, p, resulting from O-doping or cation substitution. However, a more extensive search of the literature shows that the loss of the superconductivity in favor of a normal Fermi liquid on the overdoped side should not be assumed. Many experimental results from cuprates prepared by high-pressure oxygenation show Tc converging to a fixed value or continuing to slowly increase past the upper limit of the dome of p = 0.26–0.27, up to the maximum amounts of excess oxygen corresponding to p values of 0.3 to > 0.6. These reports have been met with disinterest or disregard. Our review shows that dome-breaking trends for Tc are, in fact, the result of careful, accurate experimental work on a large number of compounds. This behavior most likely mandates a revision of the theoretical basis for high-temperature superconductivity. That excess O atoms located in specific, metastable sites in the crystal, attainable only with extreme O chemical activity under HPO conditions, cause such a radical extension of the superconductivity points to a much more substantial role for the lattice in terms of internal chemistry and bonding.

Sederholm, Linda (ORCID:0000000172090509)↗

Dynamic loads analysis system (DYLOFLEX) summary. Volume 1: Engineering formulation

The DYLOFLEX computer program system expands the aeroelastic cycle from that in the FLEXSTAB computer program system to include dynamic loads analyses involving active controls. Two aerodynamic options exist within DYLOFLEX. The analyst can formulate the problem with unsteady aerodynamics calculated using the doublet lattice method or with quasi-steady aerodynamics formulated from either FLEXSTAB or doublet lattice steady state aerodynamics with unsteady effects approximated by indicial lift growth functions. The equations of motion are formulated assuming straight and level flight and small motions. Loads are calculated using the force summation technique. DYLOFLEX consists of nine standalone programs which can be linked with each other by magnetic files used to transmit the required data between programs.

Miller, R. D.↗

Multiple and nonlocal cation redox in Ca–Ce–Ti–Mn oxide perovskites for solar thermochemical applications

Modeling-driven design of redox-active off-stoichiometric oxides for solar thermochemical H 2 production (STCH) seldom has resulted in empirical demonstration of competitive materials. Here, we report the theoretical prediction and experimental evidence that the perovskite Ca 2/3 Ce 1/3 Ti 1/3 Mn 2/3 O 3 is synthesizable with high phase purity, stable, and has desirable redox thermodynamics for STCH, with a predicted average neutral oxygen vacancy (VO) formation energy, E v = 3.30 eV. Flow reactor experiments suggest potentially comparable or greater H 2 production capacity than recent promising Sr–La–Mn–Al and Ba–Ce–Mn metal oxide perovskites. Utilizing quantum-based modeling of a solid solution on both A and B sub-lattices, we predict the impact of nearest-neighbor composition on E v and determine that A-site Ce 4+ reduction dominates the redox-activity of Ca 2/3 Ce 1/3 Ti 1/3 Mn 2/3 O 3 . X-ray absorption spectroscopy measurements provide evidence that supports these predictions and reversible Ce 4+ -to-Ce 3+ reduction. Our models predict that Ce 4+ reduces even when it is not nearest-neighbor to the V O , suggesting that refinement of Ce stoichiometry has the possibility of further enhancing performance.

08 HYDROGEN↗

Mode of incorporation of phosphorus in Hg(0.8)Cd(0.2)Te

Selim and Kroeger (1977) have studied the mode of incorporation of phosphorus in CdTe. According to their findings, phosphorus behaves amphoterically in CdTe acting as an acceptor interstitially and on Te lattice sites, and as a triple donor on Cd lattice sites. The present investigation is concerned with the role of phosphorus in Hg(0.8)Cd(0.2)Te, taking into account Hall-effect and mobility measurements on phosphorus-doped crystals quenched from a temperature in the range from 450 to 600 C subsequent to anneals in different partial pressures of Hg. It is found that the behavior of phosphorus in Hg(0.8)Cd(0.2)Te is similar to that established for CdTe, except that all the electrically active phosphorus defect centers in Hg(0.8)Cd(0.2)Te appear to be only singly ionized. At low Hg pressure, phosphorus is incorporated as a single donor occupying Hg lattice sites, and at high Hg pressure, as a single acceptor on interstitial sites and Te lattice sites.

Vydyanath, H. R.↗

Superior performance enabled by supramolecular interactions in metal-organic cathode: the power of weak bonds

Metal–organic-based electrode materials are increasingly appealing because both metal and organic linker are capable of undergoing redox processes, thus offering a high specific capacity. High porosity which can be achieved by the rational design of these materials is generally perceived as one of the major criteria for high rate performance. However, while Li-ion transport may be possible, oftentimes the counteranions (e.g., PF 6 - ) and solvent molecules are co-inserted into the porous host lattice, potentially hindering Li-ion diffusion pathways. Here, in this study, we propose the concept of close-packed metal–organic cathode stabilized by multiple supramolecular interactions as a viable solution for exceptional electrochemical performance. This is illustrated in a modularly designed redox-active [CuL(Py) 2 ] n (LH 4 = 1,4-dicyano-2,3,5,6-tetrahydroxybenzene, Py = pyridine). The mechanistic studies and DFT calculations confirm that the supramolecular interactions between its close-packed chains are the key to the flexible host lattice which only allows desolvated Li + to intercalate, while these weak bonds also stabilize the inserted Li in the preferred hopping sites, creating optimal diffusion paths. The performance observed in this work is found to be among the best ever reported for metal–organic cathodes with a capacity as high as 255 mA h g -1 at 65 mA g -1 (0.25C) and a reversible capacity of 59 mA h g -1 at ~26 A g -1 (100C) corresponding to 81% retention after 1000 cycles. These findings reveal a potential new strategy towards metal–organic-based electrodes with high performance and enhanced cycling stability.

36 MATERIALS SCIENCE↗

Terahertz-field activation of polar skyrons

Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuity at the nanometer scale with nontrivial topology, leading to previously unexplored collective modes. Here, using terahertz-field excitation and femtosecond x-ray diffraction, we discover subterahertz collective modes, dubbed “skyrons”, which appear as swirling patterns of atomic displacements functioning as atomic-scale gearsets. The key to activating skyrons is the use of the THz field that couples primarily to skyrmion domain walls. Momentum-resolved time-domain measurements of diffuse scattering reveal an avoided crossing in the dispersion relation of skyrons. Atomistic simulations and dynamical phase-field modeling provide microscopic insights into the three-dimensional crystallographic and polarization dynamics. The amplitude and dispersion of skyrons are demonstrated to be controlled by sample temperature and electric-field bias. The discovery of skyrons and their coupling with terahertz fields opens avenues for ultrafast control of topological polar structures.

ferroelectrics↗

High Temperature Superconductivity in Praseodymium Doped (0%, 2%, 4%) in Melt-Textured Y(1-x)Pr(x)Ba2Cu3O(7-delta) Systems

A study of the magnetic and structural properties of the alloy Y(1-x)Pr(x)Ba2Cu3O(7-delta) of 0%, 2%, and 4% doping of praseodymium is presented. The resulting oxides of the alloy series are a high-temperature superconductor Y-Ba-Cu-O, which has an orthorhombic superconducting crystal-lattice. Magnetic relaxation studies have been performed on the Y-Pr-Ba-CuO bulk samples for field orientation parallel to the c-axis, using a vibrating sample magnetometer. Relaxation was measured at several temperatures to obtain the irreversible magnetization curves used for the Bean model. Magnetization current densities were derived from the relaxation data. Field and temperature dependence of the logarithmic flux-creep relaxation was measured in critical state. The data indicates that the effective activation energy U(eff) increases with increasing T between 77 K and 86 K. Also, the data shows that U(eff)(T) and superconducting transition temperature, Tc, decreased as the lattice parameters increased with increasing Pr ion concentration, x, for the corresponding Y(1-x)Pr(x)Ba(x)Cu3O(7-delta) oxides. One contribution to Tc decrease in this sampling is suspected to be due to the larger ionic radius of the Pr(3+) ion. The upper critical field (H(sub c2)) was measured in the presence of magnetic field parallel to the c axis. A linear temperature dependence with H(sub c2) was obtained.

James, Claudell↗

Tailored (La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 Dy 0.2 ) 2 Ce 2 O 7 as a Highly Active and Stable Nanocatalyst for the Oxygen Evolution Reaction

Abstract Designing highly active and robust catalysts for the oxygen evolution reaction is key to improving the overall efficiency of the water splitting reaction. It has been previously demonstrated that evaporation induced self‐assembly (EISA) can be used to synthesize highly porous and high surface area cerate‐based fluorite nanocatalysts, and that substitution of Ce with 50% rare earth (RE) cations significantly improves electrocatalyst activity. Herein, the defect structure of the best performing nanocatalyst in the series are further explored, Nd 2 Ce 2 O 7 , with a combination of neutron diffraction and neutron pair distribution function analysis. It is found that Nd 3 + cation substitution for Ce in the CeO 2 fluorite lattice introduces higher levels of oxygen Frenkel defects and induces a partially reduced RE 1.5 Ce 1.5 O 5 +x phase with oxygen vacancy ordering. Significantly, it is demonstrated that the concentration of oxygen Frenkel defects and improved electrocatalytic activity can be further enhanced by increasing the compositional complexity (number of RE cations involved) in the substitution. The resulting novel compositionally‐complex fluorite– (La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 Dy 0.2 ) 2 Ce 2 O 7 is shown to display a low OER overpotential of 210 mV at a current density of 10 mAcm −2 in 1M KOH, and excellent cycling stability. It is suggested that increasing the compositional complexity of fluorite nanocatalysts expands the ability to tailor catalyst design.

Chemistry↗

Bottom-up evolution of perovskite clusters into high-activity rhodium nanoparticles toward alkaline hydrogen evolution

Self-reconstruction has been considered an efficient means to prepare efficient electrocatalysts in various energy transformation process for bond activation and breaking. However, developing nano-sized electrocatalysts through complete in-situ reconstruction with improved activity remains challenging. Herein, we report a bottom-up evolution route of electrochemically reducing Cs 3 Rh 2 I 9 halide-perovskite clusters on N-doped carbon to prepare ultrafine Rh nanoparticles (~2.2 nm) with large lattice spacings and grain boundaries. Various in-situ and ex-situ characterizations including electrochemical quartz crystal microbalance experiments elucidate the Cs and I extraction and Rh reduction during the electrochemical reduction. These Rh nanoparticles from Cs 3 Rh 2 I 9 clusters show significantly enhanced mass and area activity toward hydrogen evolution reaction in both alkaline and chlor-alkali electrolyte, superior to liquid-reduced Rh nanoparticles as well as bulk Cs 3 Rh 2 I 9 -derived Rh via top-down electro-reduction transformation. Theoretical calculations demonstrate water activation could be boosted on Cs 3 Rh 2 I 9 clusters-derived Rh nanoparticles enriched with multiply sites, thus smoothing alkaline hydrogen evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selenium Migration and Local Structures in Cu‐Doped CdSeTe Solar Cells after Aging

Selenium grading plays a critical role in state-of-the-art Cadmium Telluride photovoltaic cells by enhancing long-wavelength absorption and extending minority carrier lifetimes —key to enabling the current performance record of 23.08%. However, very little is understood about selenium motion. In this study, a comprehensive, multimodal, and multiscale approach is employed to investigate Se migration and local structural changes in copper (Cu)-doped CdSeTe solar cells subjected to accelerated stress. X-ray fluorescence (XRF) microscopy shows unexpected levels of Se diffusion after 500 h under heat (75°C) and light (0.8 suns, 80 mW/cm 2 ), suggesting the coexistence of fast and slow diffusion channels even at low temperatures, with unexpectedly low activation energies (<0.85 eV). X-ray Absorption Near Edge Structure (XANES) analysis indicates a preferential migration of Se atoms to anionic lattice sites and a reduction in Se-Cl co-passivation at Te-terminated dislocation cores. Furthermore, these findings point to a reconfiguration of Se local environments and highlight the potential role of extended structural defects in enabling Se transport at low temperatures. Additionally, XANES results suggest that the presence of metallic Cu across the absorber layer may contribute to back-contact degradation and reduced hole density in both fresh and aged devices.

14 SOLAR ENERGY↗

A comparative study on cubic and tetragonal Ce-ZrO 2 supported Rh catalysts for N 2 O decomposition

Zirconium oxide (ZrO 2 ) exhibits strong synergy with cerium oxide (CeO 2 ), acting as a structural and electronic promoter during catalytic redox reactions. As a result, Ce-ZrO 2 composite oxides are widely used as supports in various catalytic systems. In our previous work, we demonstrated that the incorporation of Zr 4+ into the CeO 2 lattice significantly enhanced Rh dispersion, improved redox ability, and stabilized surface Rh species, which collectively boosted the de-N 2 O activity of Rh/Ce-ZrO 2 catalysts. Building on these findings, the present study emphasizes that the crystallographic phase of Ce-ZrO 2 , governed by the Ce/Zr ratio, plays a decisive role in tuning the physicochemical environment of Rh active sites and thereby optimizing catalytic performance. In conclusion, tailoring the Ce/Zr ratio to favor the cubic fluorite structure emerges as a promising strategy for the rational design of highly active and stable catalysts for N 2 O decomposition and potentially other redox-sensitive environmental applications.

36 MATERIALS SCIENCE↗

Electrical and structural characterization of nano-carbon–aluminum composites fabricated by electro-charging-assisted process

Incorporating nano-carbon phases into metal-matrix composites is a promising strategy for simultaneously enhancing electrical conductivity and mechanical properties of metals. Here, we describe the manufacture of novel nano-carbonaluminum composites by an electro-charge-assisted process (EAP) that show 5.6% ± 1.7% increase in electrical conductivity compared to the base metal alloy. The source of nano-carbon that we used in this study is activated carbon with particle size less than 100 nm. The enhancement is attributed to nano-graphitic structures that extend through the lattice of the metal. Through electron transfer from the metal to the nanostructures the electron density at the interface of nano-crystalline graphite and the metal lattice increases thereby enhancing the bulk electrical conductivity. We identify the important fabrication parameters of the EAP for a reaction system employing a tapered graphite cathode. Here, a high current density of 100 A/cm 2 causes ionization and crystallization of the carbon in the liquid metal. The increase in electrical conductivity of the composite are directly related to the incorporation of the nanocrystalline carbon in the metal lattice. The superior performance of these nano-carbon aluminum composites makes them promising candidates for power transmission lines and other applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Observation of a mixed close-packed structure in superionic water

The study of superionic (SI) water has been a highly active research area since its theoretical prediction. Despite significant experimental and computational efforts, its melting curve and the stability of different oxygen lattices remain debated, impacting our understanding of SI ice’s peculiar transport properties. Experimental results at lower pressures show disagreement, whereas data at higher pressures are scarce due to the extreme challenges of such experiments. In this work, we present ultrafast X-ray diffraction results of water compressed by multiple shocks to pressures up to ~ 180 GPa. At pressures exceeding 150 GPa and temperatures around 2500 K, our diffraction patterns challenge the pure FCC-SI phase model, providing experimental evidence of the mixed close-packed superionic phase predicted by advanced ab initio calculations. At lower pressures, we observe simultaneous signatures of BCC and FCC structures within a pressure-temperature range consistent with some static-compression experiments, helping to resolve contradictory results in literature. These insights offer new constraints on the stability domains of SI phases and reveal detailed structural features, such as stacking faults. Our results advance the structural understanding of high-pressure SI ice to a level approaching that of ice I polymorphs, with potential implications for water-rich interiors of giant planets.

Andriambariarijaona, Leon [Centre National de la R↗

Oxygen vacancy-induced ferroelectric effect in (111) strontium titanate single crystals controls photoelectrochemical water oxidation

Ferroelectric materials, such as tetragonal BaTiO 3 , have a permanent electric polarization that can be controlled with an external electric field, however, a ferroelectric polarization in cubic SrTiO 3 is forbidden by the higher symmetry of the lattice. Here we demonstrate that hydrogen annealed SrTiO 3−x single crystals can be polarized electrically, and that the polarization controls the activity for photoelectrochemical water oxidation, a pathway to solar hydrogen fuel. Specifically, it is observed that the anodic water oxidation photocurrent increases from 0.99 to 2.22 mA cm −2 at 1.23 V RHE (60 mW cm −2 , UV illumination) or decreases to 0.50 mA cm −2 after electric polarization of hydrogen-annealed (111) SrTiO 3−x single crystals in forward or reverse direction. The polarization also modifies the surface photovoltage signal of the material and its flat band potential, based on Mott–Schottky measurements. These observations are attributed to the formation of an electric dipole at the (111) SrTiO 3−x surface, which alters the potential drop across the depletion layer at the solid–liquid junction, and with it the electron transfer barrier. Density functional theory calculations confirm that an electric dipole can result from the movement of oxygen vacancies between the surface or sub-surface layers of SrTiO 3−x . The filling of these surface oxygen vacancies is the probable cause for the observed disappearance of the electric polarization after 24 h storage in air and 48 h in argon. Overall, this work establishes a new surface-based ferroelectric effect in SrTiO 3−x and its use for solar energy conversion during photoelectrochemical water oxidation. Because oxygen vacancy defects are common, similar electric polarization effects are to be expected in other metal oxides.

Assavachin, Samutr [University of California, Davi↗

NMR study of Ni 50+x ⁢Ti 50-x strain glasses

Here, we studied Ni 50+x ⁢Ti 50-x with compositions up to x = 2, performing 47 Ti and 49 Ti nuclear magnetic resonance (NMR) measurements from 4 to 400 K. For large x in this system, a strain glass appears in which frozen ferroelastic nanodomains replace the displacive martensite structural transition. Here, we demonstrate that NMR can provide an extremely effective probe of the strain-glass freezing process, with large changes in NMR line shape due to the effects of random strains which become motionally narrowed at high temperatures. At the same time with high-resolution x-ray diffraction we confirm the lack of structural changes in x ≥ 1.2 samples, while we show that there is little change in the electronic behavior across the strain-glass freezing temperature. NMR spin-lattice relaxation time (T 1 ) measurements provide a further measure of the dynamics of the freezing process, and indicate a predominantly thermally activated behavior both above and below the strain-glass freezing temperature. We show that the strain-glass results are consistent with a very small density of critically divergent domains undergoing a Vogel-Fulcher-type freezing process, coexisting with domains exhibiting faster dynamics and stronger pinning.

36 MATERIALS SCIENCE↗

Electron-Ion Collider Design Status

The Electron-Ion Collider (EIC) is being designed for construction at Brookhaven National Laboratory. Activities have been focused on beam-beam simulations, polarization studies, and beam dynamics, as well as on maturing the layout and lattice design of the constituent accelerators and the interaction region. The latest design advances will be presented.

43 PARTICLE ACCELERATORS↗

Structural regulation-induced Li-electron disentanglement for stabilized oxygen redox of Li-excess disordered rock-salt cathode materials

Since the discovery of its electrochemical activity, Li-excess disordered rock-salt (DRX) cathode material has received worldwide attention as it sets up a new way to exploit oxygen redox beyond the conventional layered structure with late-3d transition metals. However, the intricate structure-function relationship in the disordered lattice of the DRX material fogs the researcher's lens on the underlying redox mechanisms. Here, in this study, we employ a synergistic approach combining neutron total scattering with reverse Monte Carlo modeling and density functional theory calculations to unravel the landscape of oxygen redox reactions in DRX. Redox activities are evaluated in diverse oxygen clusters (OLi x TM 6-x ) and the spatial distribution of these clusters in the model DRX structure (Li 1.16 Ti 0.37 Ni 0.37 Nb 0.1 O 2 and Li 1.2 Ti 0.35 Ni 0.35 Nb 0.1 O 1.8 F 0.2 ) is explicitly determined. The results unveil that by regulating the short-range ordering between cations, fluorine atoms can effectively decouple the location of Li extraction and electron depletion. Such disentanglement between the Li reservoir and electron reservoir in the DRX lattice could play a pivotal role in protecting the oxidized oxygen and preserving the lattice framework during cycling. Through a tentatively designed non-fluorinated DRX oxide realizing similar Li-electron decoupling, an obvious enhancement of the cycling capability can be achieved without compromising the capacity release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Orientation Independent Strong TERS Response in Anisotropic ReS2 on Gold

Rhenium disulfide (ReS2) crystallizes in a distorted 1T' lattice with triclinic symmetry arising from Re–Re dimerization, which produces in-plane anisotropic properties and a dense set of Raman-active modes with mixed atomic displacements. Unlike far-field Raman spectroscopy, which shows strong polarization and orientation dependence, tip-enhanced Raman spectroscopy (TERS) probes out-of-plane Raman tensor components. Here we use 785 nm (1.58 eV) gap-mode TERS to investigate monolayer to four-layer thick ReS2 crystals.. TERS maps and averaged spectra reveal that all modes remain invariant under 90° rotation of the crystal, and the only thickness-dependent feature is the emergence of the multilayer breathing mode. These results demonstrate that TERS yields a crystal-orientation-independent Raman response in ReS2 and provides direct access to Raman tensor components that are not easily accessible in conventional far-field measurements.

Valencia Acuna, Pavel A.↗