Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WITS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Optimization of cathodic arc deposition and pulsed plasma melting techniques for growing smooth superconducting Pb photoemissive films for SRF injectors

Superconducting photoinjectors have a potential to be the optimal solution for moderate and high current cw operating free electron lasers. For this application, a superconducting lead (Pb) cathode has been proposed to simplify the cathode integration into a 1.3 GHz, TESLA-type, 1.6-cell long purely superconducting gun cavity. In the proposed design, a lead film several micrometres thick is deposited onto a niobium plug attached to the cavity back wall. Traditional lead deposition techniques usually produce very non-uniform emission surfaces and often result in a poor adhesion of the layer. A pulsed plasma melting procedure reducing the non-uniformity of the lead photocathodes is presented. In order to determine the parameters optimal for this procedure, heat transfer from plasma to the film was first modelled to evaluate melting front penetration range and liquid state duration. The obtained results were verified by surface inspection of witness samples. The optimal procedure was used to prepare a photocathode plug, which was then tested in an electron gun. In conclusion, the quantum efficiency and the value of cavity quality factor have been found to satisfy the requirements for an injector of the European-XFEL facility.

42 ENGINEERING↗

Experimental design of a W-band corrugated waveguide for wakefield acceleration studies

Radiofrequency (RF) structures in the sub-terahertz (sub-THz) regime are of interest for applications in structure wakefield acceleration due to their compact size and potential for high gradients. Here, we present the design, fabrication, and experimental setup of a metallic corrugated waveguide at 110 GHz, optimized for the 42 MeV electron beam parameters at the Argonne Wakefield Accelerator (AWA). The emittance exchange (EEX) beamline at AWA was used to perform longitudinal bunch shaping for two cases: (1) a high decelerating gradient experienced by a single drive electron bunch about 250 μm long; (2) a high transformer ratio using a two-bunch train consisting of a triangularly shaped drive bunch followed by a long witness bunch to probe the wakefield. Preliminary experimental results are presented, and data analysis is ongoing.

43 PARTICLE ACCELERATORS↗

119 Sn-NMR investigations on superconducting Ca 3 Ir 4 Sn 13 : Evidence for multigap superconductivity

In this study, we report bulk superconductivity (SC) in Ca 3 Ir 4 Sn 13 by means of 119 Sn nuclear magnetic resonance (NMR) experiments. Two classical signatures of BCS superconductivity in spin-lattice relaxation rate (1/T 1 ), namely the Hebel–Slichter coherence peak just below the T c , and the exponential decay in the superconducting phase, are evident. The noticeable decrease of 119 Sn Knight shift below T c indicates spin-singlet superconductivity. The temperature dependence of the spin-lattice relaxation rate 119 (1/T 1 ) is convincingly described by the multigap isotropic superconducting gap. NMR experiments do not witness any sign of enhanced spin fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum fisher information reveals UV-IR mixing in the strange metal

The density-density response in optimally doped Bi 2 Sr 2 CaCu 2 O 8+$x$ has recently been shown to exhibit conformal symmetry. Using, the experimentally inferred conformal dynamic susceptibility, we compute the resultant quantum Fisher information (QFI), a witness to multi-partite entanglement. For a Fermi liquid, we find that the QFI grows quadratically as the temperature increases, consistent then with the phase space available for scattering in the standard theory of metals. By contrast, the QFI in a strange metal increases as a power law at as the temperature decreases, but ultimately extrapolates to a constant at T=0. The constant is of the form, ω$^{2Δ}_g$, where Δ is the conformal dimension and ω g is the UV cutoff which is on the order of the pseudogap. As this constant depends on both UV and IR properties, it illustrates that multipartite entanglement in a strange metal exhibits UV-IR mixing, a benchmark feature of doped Mott insulators as exemplified by dynamical spectral weight transfer. We conclude with a discussion of the implication of our results for low-energy reductions of the Hubbard model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel approaches in hadron spectroscopy

The last two decades have witnessed the discovery of a myriad of new and unexpected hadrons. The future holds more surprises for us, thanks to new-generation experiments. Understanding the signals and determining the properties of the states requires a parallel theoretical effort. To make full use of available and forthcoming data, a careful amplitude modeling is required, together with a sound treatment of the statistical uncertainties, and a systematic survey of the model dependencies. We review the contributions made by the Joint Physics Analysis Center to the field of hadron spectroscopy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Assessment of HRA method predictions against operating crew performance: Part II: Overall simulator data, HRA method predictions, and intra-method comparisons

This is the third in a series of four papers documenting two large-scale human reliability analysis (HRA) empirical studies – the International HRA Empirical Study and the US HRA Empirical Study. Here, the goal of the two studies was to develop an empirically-based understanding of the performance, strengths, and weaknesses of HRA methods by comparing HRA method predictions against actual operator performance in simulated accident scenarios on nuclear power plant (NPP) simulators. However, since in most cases only a single HRA team applied a given method in the International study, it was often difficult to separate analyst effects from variability in results related to the methods themselves. Since at least two HRA teams used each of the HRA methods in the US Study, intra-method comparisons were performed to identify method strengths and weaknesses independent of analyst specific effects where possible. This paper first summarizes the intra-method comparison results from the U.S. Study. Then, it discusses the reasons for the observed HRA predictive differences and the underlying methodological and guidance limitations that permitted the differences to arise. In the fourth paper, this information is combined wit h the results of the comparisons of method predictions to the actual crew data, from both the International and U.S. Studies, to develop the final conclusions about overall strengths and weaknesses of HRA methods.

97 MATHEMATICS AND COMPUTING↗

Response of deep aquifers to climate variability

There is a general agreement that deep aquifers experience significant lag time in their response to climatic variations. Analysis of Temporal Gravity Recovery and Climate Experiment (GRACE), Soil Moisture and Ocean Salinity mission (SMOS), satellite altimetry, stable isotopic composition of groundwater, and precipitation and static global geopotential models over the Nubian Sandstone Aquifer System (NSAS) revealed rapid aquifer response to climate variability. Findings include: (1) The recharge areas of the NSAS (Northern Sudan Platform subbasin) witnessed a dry period (2002-2012), where average annual precipitation (AAP) was modest (85 mm) followed by a wet period (2013-2016; AAP: 107 mm), and during both periods the APP remained negligible (<10 mm) over the northern parts of the NSAS (Dakhla subbasin); (2) the secular trends in terrestrial water storage (TWS) over the Dakhla subbasin were estimated at -3.8 ± 1.3 mm/yr and + 7.8 ± 1 mm/yr for the dry and wet periods, respectively; (3) spatial variations in TWS values and phase are consistent with rapid groundwater flow from the Northern Sudan Platform subbasin and Lake Nasser towards the Dakhla subbasin during the wet period and from the lake during the dry period; and (4) networks of densely fractured and karstified bedrocks provide preferential pathways for groundwater flow. The proposed model is supported by (1) rapid response in groundwater levels in distant wells (>280 km from source areas) and in soil moisture content in areas with shallow (<2 m) groundwater levels to fluctuations in Lake Nasser surface water, and (2) the isotopic composition (O, H) of groundwater along the preferred pathways, consistent with mixing of enriched (Lake Nasser water or precipitation over Sudan) and depleted (NSAS fossil water) end-members. Here, findings provide new insights into the response of large, deep aquifers to climate variability and address the sustainability of the NSAS and similar fossil aquifers worldwide.

54 ENVIRONMENTAL SCIENCES↗

Hydrological projections over the Upper Indus Basin at 1.5 °C and 2.0 °C temperature increase

We analyse an ensemble of statistically downscaled Global Climate Models (GCMs) to investigate future water availability in the Upper Indus Basin (UIB) of Pakistan for the time horizons when the global and/or regional warming levels cross Paris Agreement (PA) targets. The GCMs data is obtained from the 5th Phase of Coupled Model Inter-Comparison Project under two Representative Concentration Pathways (RCP4.5 and RCP8.5). Based on the five best performing GCMs, we note that global 1.5 °C and 2.0 °C warming thresholds are projected in 2026 and 2047 under RCP4.5 and 2022 and 3036 under RCP8.5 respectively while these thresholds are reached much earlier over Pakistan i.e. 2016 and 2030 under RCP4.5 and 2012 and 2025 under RCP8.5 respectively. Interestingly, the GCMs with the earliest emergence at the global scale are not necessarily the ones with the earliest emergence over Pakistan, highlighting spatial non-linearity in GCMs response. The emergence of 2.0 °C warming at global scale across 5 GCMs ranges from 2031 (CCSM4) to 2049 (NorESM) under RCP8.5. Precipitation generally exhibits a progressive increasing trend with stronger changes at higher warming or radiative forcing levels. Hydrological simulations representing the historical, 1.5 °C and 2.0 °C global and region warming time horizons indicate a robust but seasonally varying increase in the inflows. The highest inflows in the baseline and future are witnessed in July. However, the highest future increase in inflows is projected in October under RCP4.5 (37.99% and 65.11% at 1.5 °C and 2.0 °C) and in April under RCP8.5 (37% and 62.05% at 1.5 °C and 2.0 °C). These hydrological changes are driven by increases in the snow and glacial melt contribution, which are more pronounced at 2.0 °C warming level. These findings should help for effective water management in Pakistan over the coming decades.

54 ENVIRONMENTAL SCIENCES↗

Next-Generation Reverse Logistics Networks of Photovoltaic Recycling: Perspectives and Challenges

With the growing adoption of solar energy as a key component of the global energy transition and its new industrial policy (the Inflation Reduction Act and others), the United States is witnessing a significant increase in solar investments. This surge in installations and domestic and reshored manufacturing of solar photovoltaic (PV) panels brings with it a pressing issue: the proper management of end-of-life (EoL) PV panels. As these panels are decommissioned, either due to reaching the end of their lifespans or due to breakage across the various stages of the forward supply chain, it becomes crucial to establish efficient reverse supply chain logistics systems to address the challenges associated with their disposal, while also unlocking the value of the inherent materials that are of critical value for other forward supply chains. This perspective article examines the challenges regarding EoL PV panels and relevant reverse supply chain and logistics networks, and proposes future research directions based on the gaps observed among academic research, industry, and policy-making challenges. We identify the main bottlenecks and hurdles including, among others, the lack of supportive regulations and absence of structured, optimized recycling infrastructure. To this end, it is proposed that the key to achieving a sustainable reverse supply chain network for solar PV panels lies in relentless end-to-end supply chain cost optimization efforts supported by enabling policies. Moreover, it is proposed that designing systematic decision-making modeling frameworks is vital for examining different possibilities and scenarios for state, region or nation-wide optimization of solar PV reverse supply chain networks. Indicative to this effect, we discuss the development of a Resource-Task-Network (RTN)-based model and demonstrate its application and benefits through a case study. We wrap up with conclusions and future research directions.

circular economy↗

High Resolution Dopant Profiles Revealed by Atom Probe Tomography and STEM-EBIC for CdTe Based Solar Cells

Segregated elements and their diffusion profiles within grain boundaries and interfaces resulting from post deposition heat treatments are revealed using atom probe tomography (APT), scanning transmission electron microscopy (STEM), and electron beam induced current (EBIC) techniques. The results demonstrate how these techniques complement each other to provide conclusive evidence for locations of space charge regions and mechanisms that create them at the nanoscale. Most importantly, a Cl dopant profile that extends ~5 nm into CdTe grains interfacing the CdS is shown using APT and STEM synergy, which has been shown to push the pn-junction into the CdTe layer indicative of a homojunction (revealed by STEM EBIC). In addition, Cu and Cl concentrations within grain boundaries within several nms and µms from the CdS/CdTe interface are compared, Na segregation of <0.1% is detected, and S variations of ~1–3% are witnessed between CdTe grains close to the CdS/CdTe interface. The segregation and diffusion of these elements directly impacts on the material properties, such as band gap energy and n/p type properties. Optimization of the interfacial and grain boundary doping will lead to higher efficiency solar cells.

36 MATERIALS SCIENCE↗

Hybrid SERS platform by adapting both chemical mechanism and electromagnetic mechanism enhancements: SERS of 4-ATP and CV by the mixture with GQDs on hybrid PdAg NPs

Surface-enhanced Raman spectroscopy (SERS) is a versatile analytical technique widely adapted for the identification of target analytes even at an extremely low concentration. Herein, a unique hybrid SERS platform is demonstrated by utilizing the graphene quantum dots (GQDs) and hybrid PdAg NPs for the detection of 4-amino-thiophenol (4-ATP) and crystal violet (CV). GQDs offer the rich charge transfer to the LUMO and HOMO of 4-ATP and CV by the CM enhancement. A significant EM enhancement is achieved by the strong localized surface plasmon resonance (LSPR) of uniquely designed hybrid core-shell PdAg NP, possessing the narrow nano-gaps with the highly dense small Ag NPs and Pd core Ag shell configuration. As a result, orders of enhancement of originally weak 4-ATP and CV Raman signal is witnessed by the combination of electromagnetic mechanism (EM) and chemical mechanism (CM) enhancements on a single SERS substrate. The hybrid GQD/HNP SERS substrate demonstrates significantly improved hot spots and strongly localized electromagnetic fields as confirmed by the finite-difference time-domain (FDTD) simulations. There for a proper mixture ratio of GQDs and probe molecules presents largely enhanced SERS signals by a strong adsorption of probe molecules through π - π interaction and the enhancement factors vary by the mixture ratio depending on the adsorption kinetics and Raman cross-section of molecules.

36 MATERIALS SCIENCE↗

SynMADE: synthetic microbiota across diverse ecosystems

The last two decades have witnessed rapid advances in engineering individual microbial strains to produce biochemicals and biomaterials. Furthermore, engineering microbial consortia has been relatively slow. Using systems and synthetic biology approaches, researchers have been developing tools for engineering complex microbiota. In this article, I discuss future directions and visions regarding developing microbiota as a biomanufacturing host. Specifically, I propose that we can develop the soil microbial community itself as a huge bioreactor. Ultimately, researchers will provide a generalizable system that enables us to understand microbial consortium’s interaction and metabolism at diverse temporal and spatial scales to address global problems, including the climate crisis, food inequality, waste issue, and sustainable bioproduction.

59 BASIC BIOLOGICAL SCIENCES↗

Sputter deposition of high electrical resistivity Au-Ta alloy coatings on rotating substrates

Sputter deposition of gold-tantalum alloy coatings is a key process for manufacturing hohlraums for magnetically-assisted inertial confinement fusion implosions. In this report we describe direct current magnetron sputter deposition of ~ 10 - μ~ 10 - μm-thick films of Au-80 at.% Ta onto rotating sphero-cylindrical hohlraum and planar Si witness substrates. Emphasis is given to how film microstructure and properties are affected by main deposition parameters, including argon working gas pressure, substrate bias, and the source composition (a single alloyed target compared to co-sputtering from two elemental targets). Experimental findings are correlated with distributions of landing energies and incident angles of depositing species calculated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. Deposition conditions characterized by low energetics of depositing species favor the formation of a β-Ta-like phase. Implications of these results to hohlraum fabrication are discussed.

36 MATERIALS SCIENCE↗

Increase in extreme precipitation events under anthropogenic warming in India

India has witnessed some of the most devastating extreme precipitation events, which have affected urban transportation, agriculture, and infrastructure. Despite the profound implications and damage due to extreme precipitation events, the influence of anthropogenic warming on the intensity and frequency of extreme precipitation events over India remains poorly constrained. Here using the gridded observations and simulations from the Coupled model intercomparison project 5 (CMIP5) and Climate of 20th century plus (C20C+) detection and attribution (D&A) project, we show that the frequency and intensity of extreme precipitation events have increased in India during the last few decades. Along with the extreme precipitation, dew point temperature has also increased during 1979–2015. The scaling relationship between extreme precipitation and dew point temperature shows a super (more than 7% increase per unit rise in dew point temperature) Clausius-Clapeyron (C-C) relationship for the majority of south India. Moreover, southern and central India show a higher (10%/°C) scaling relationship than north India (3.5%/°C). Our analysis using the Hist (historic) and HistNat (historic natural) simulations from the CMIP5 and C20C+ projects confirms an increase in the frequency of extreme precipitation events under the anthropogenic warming. Moreover, we show that 1–5 day precipitation maxima at 5–500 year return period increases (10–30%) under the anthropogenic warming. The frequency of precipitation extremes is projected to rise more prominently in southern and central India in the mid and end of the 21st century under the representative concentration pathway (RCP) 8.5. Our results show a significant contribution of anthropogenic warming in the rise of the frequency of extreme precipitation, which has implications for infrastructure, agriculture, and water resources in India.

54 ENVIRONMENTAL SCIENCES↗

Electronic waste (e-waste): Material flows and management practices in Nigeria

The growth in electrical and electronic equipment (EEE) production and consumption has been exponential in the last two decades. This has been as a result of the rapid changes in equipment features and capabilities, decrease in prices, and the growth in internet use. This creates a large volume of waste stream of obsolete electrical and electronic devices (e-waste) in developed countries. There is high level of trans-boundary movement of these devices as secondhand electronic equipment into developing countries in an attempt to bridge the 'digital divide'. The past decade has witnessed a phenomenal advancement in information and communication technology (ICT) in Nigeria, most of which rely on imported secondhand devices. This paper attempts to review the material flow of secondhand/scrap electronic devices into Nigeria, the current management practices for e-waste and the environmental and health implications of such low-end management practices. Establishment of formal recycling facilities, introduction of legislation dealing specifically with e-waste and the confirmation of the functionality of secondhand EEE prior to importation are some of the options available to the government in dealing with this difficult issue.

54 ENVIRONMENTAL SCIENCES↗

A BIM-based system for demolition and renovation waste estimation and planning

Highlights: ► We developed a waste estimation system leveraging the BIM technology. ► The system can calculate waste disposal charging fee and pick-up truck demand. ► We presented an example scenario demonstrating this system. ► Automatic, time-saving and wide applicability are the features of the system. - Abstract: Due to the rising worldwide awareness of green environment, both government and contractors have to consider effective construction and demolition (C and D) waste management practices. The last two decades have witnessed the growing importance of demolition and renovation (D and R) works and the growing amount of D and R waste disposed to landfills every day, especially in developed cities like Hong Kong. Quantitative waste prediction is crucial for waste management. It can enable contractors to pinpoint critical waste generation processes and to plan waste control strategies. In addition, waste estimation could also facilitate some government waste management policies, such as the waste disposal charging scheme in Hong Kong. Currently, tools that can accurately and conveniently estimate the amount of waste from construction, renovation, and demolition projects are lacking. In the light of this research gap, this paper presents a building information modeling (BIM) based system that we have developed for estimation and planning of D and R waste. BIM allows multi-disciplinary information to be superimposed within one digital building model. Our system can extract material and volume information through the BIM model and integrate the information for detailed waste estimation and planning. Waste recycling and reuse are also considered in our system. Extracted material information can be provided to recyclers before demolition or renovation to make recycling stage more cooperative and more efficient. Pick-up truck requirements and waste disposal charging fee for different waste facilities will also be predicted through our system. The results could provide alerts to contractors ahead of time at project planning stage. This paper also presents an example scenario with a 47-floor residential building in Hong Kong to demonstrate our D and R waste estimation and planning system. As the BIM technology has been increasingly adopted in the architectural, engineering and construction industry and digital building information models will likely to be available for most buildings (including historical buildings) in the future, our system can be used in various demolition and renovation projects and be extended to facilitate project control.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sorafenib derivatives-functionalized gold nanoparticles confer protection against tumor angiogenesis and proliferation via suppression of EGFR and VEGFR-2

Sorafenib is a multi-kinase inhibitor that has been highlighted as a tumor suppressor due to its anti-proliferative and anti-angiogenic properties, whereas the clinical application of Sorafenib is restricted by the side effects it may cause. The past decade has witnessed the development of a series of sorafenib derivatives to improve the clinical performance of sorafenib. Gold nanoparticles (AuNPs) have been widely utilized in drug delivery systems due to their unique properties, including biocompatible nature, simple preparation, and easy surface modification. Herein, this study is aimed to investigate the anti-tumor effects of new sorafenib derivatives-capped gold nanoparticles (AuNPs-New Sor) in tumor formation and metastasis as well as the underlying mechanisms. Initially, new sorafenib derivatives were constructed and combined with AuNPs to form AuNPs-New Sor, and the properties of synthesized AuNPs-New Sor were identified in a mouse model of tumorigenesis. The effect of AuNPs-New Sor on tumor vascular normalization was investigated by assessing vascular permeability and perfusion rate. Next, we evaluated the effect of AuNPs-New Sor on migration and viability of tumor cells and human umbilical vein endothelial cells (HUVECs) as well as on HUVEC angiogenesis in vitro. A melanoma mouse model was further established for in vivo substantiation of the anti-tumor effect of AuNPs-New Sor. According to the results, AuNPs could deliver new sorafenib derivatives into tumor tissues and downregulate the expression of epidermal growth factor receptor (EGFR) and vascular endothelial growth factor receptor-2 (VEGFR-2), thereby suppressing tumor migration, EMT, and angiogenesis in vitro. In addition, AuNPs-New Sor displayed competitive anti-tumor activities in vivo. Taken together, AuNPs-New Sor may attenuate tumor development and angiogenesis through downregulation of EGFR and VEGFR-2.

60 APPLIED LIFE SCIENCES↗