Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vortex flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Development of the Dual Aerodynamic Nozzle Model for the NTF Semi-Span Model Support System

The recent addition of a dual flow air delivery system to the NASA Langley National Transonic Facility was experimentally validated with a Dual Aerodynamic Nozzle semi-span model. This model utilized two Stratford calibration nozzles to characterize the weight flow system of the air delivery system. The weight flow boundaries for the air delivery system were identified at mildly cryogenic conditions to be 0.1 to 23 lbm/sec for the high flow leg and 0.1 to 9 lbm/sec for the low flow leg. Results from this test verified system performance and identified problems with the weight-flow metering system that required the vortex flow meters to be replaced at the end of the test.

Jones, Greg S.↗
NASA NTRS1982

Aerodynamic performance of slender wings with separated flows

The aerodynamic performance of low aspect ratio sweptback wings with vortex flows was numerically investigated using the free vortex sheet method. The models studied included flat, cambered, strake, and leading edge flapped wings of different planforms. The theoretical results predicted by the method were compared with the existing experimental data wherever available; and the code capabilities and limitations were explored. Also the effects of the wing thickness, fuselage, leading edge flap and multiple vortex modeling on the aerodynamic characteristics were studied.

Reddy, C. S.↗
NASA NTRS1988

Nonlinear Tollmien-Schlichting/vortex interaction in boundary layers

The nonlinear reaction between two oblique 3-D Tollmein-Schlichting (TS) waves and their induced streamwise-vortex flow is considered theoretically for an imcompressible boundary layer. The same theory applies to the destabilization of an incident vortex motion by subharmonic TS waves, followed by interaction. The scales and flow structure involved are addressed for high Reynolds numbers. The nonlionear interaction is powerful, starting at quite low amplitudes with a triple-deck structure for the TS waves but a large-scale structure for the induced vortex, after which strong nonlinear amplification occurs. This includes nonparallel-flow effects. The nonlinear interaction is governed by a partial differential system for the vortex flow coupled with an ordinary-differential one for the TS pressure. The solution properties found sometimes produce a breakup within a finite distance and sometimes further downstream, depending on the input amplitudes upstream and on the wave angles, and that then leads to the second stages of interaction associated with higher amplitudes, the main second stages giving either long-scale phenomena significantly affected by nonparallelism or shorter quasi-parallel ones governed by the full nonlinear triple-deck response.

Hall, P.↗
NASA NTRS1989

Nonlinear a Tollmien-Schlichting/vortex interaction in boundary layers

The nonlinear reaction between two oblique three-dimensional Tollmien-Schlichting (TS) waves and their induced streamwise-vortex flow is considered theoretically for an incompressible boundary layer. The same theory applies to the destabilization of an incident vortex motion by subharmonic TS waves, followed by interaction. The scales and flow structure involved are addressed for high Reynolds numbers. The nonlinear interaction is powerful, starting at quite low amplitudes with a triple-deck structure for the TS waves but a large-scale structure for the induced vortex, after which strong nonlinear amplification occurs. This includes nonparallel-flow effects. The nonlinear interaction is governed by a partial differential system for the vortex flow coupled with an ordinary-differential one for the TS pressure. The solution properties found sometimes produce a breakup within a finite distance and sometimes further downstream, depending on the input amplitudes upstream and on the wave angles, and that then leads to the second stages of interaction associated with higher amplitudes, the main second stages giving either long-scale phenomena significantly affected by nonparallelism or shorter quasi-parallel ones governed by the full nonlinear triple-deck response.

Hall, P.↗
NASA NTRS1975

Aircraft wake vortex velocity measurements using a scanning CO2 laser Doppler velocimeter

A CO2 laser Doppler velocimeter was employed in the study of pairs of counterrotating vortices trailing aircraft in an airport air space. A laser positioned on an extended runway centerline scans a vertical plane perpendicular to the centerline. Vortex location, measurement of vortex transport, and measurement of the properties of aircraft wake vortex flow fields are achieved via spectral analysis of the data. Highest amplitude in the spectrum, the associated maximum velocity, the highest velocity above the amplitude threshold, and the total number of frequency (velocity) cells above thresholds are studied as parameters in analysis of the vortex-associated flow field. The profile of the radial variation of tangential velocity is studied, and two special problems are examined: location of the vortex center and error introduced by crosswind.

Dimarzio, C. A.↗
NASA NTRS1979

Control of forebody three-dimensional flow separations

The development of the turbulent symmetric and asymmetric vortex flow about the lee side of a 5 deg semiangle conical forebody at high relative incidence was investigated. The cone was immersed in a Mach 0.6 airstream at a Reynolds number of 13.5 x 10 to the 6th power based on the 1.4 m axial length of the cone. Small amounts of air injected normally or tangentially to the cone surface, but on one side of the leeward meridian and beneath the vortex farthest from the wall, were effective in biasing the asymmetry. With this reorientation of the forebody vortices, the amplitude of the side force could be reduced to the point where its direction was reversed. This phenomenon was obtained either by changing the blowing rate at constant incidence or by changing incidence at constant blowing rate. Normal injection appeared more effective than tangential injection. The contrarotating vortices in the penetrating jet flow were of opposite hand to the rotational directions of the forebody vortices. A distinctively organized and stable flow structure emerged with the jet vortices positioned above the forebody vortices.

Peake, D. J.↗
NASA NTRS1984

Vortex flaps - Advanced control devices for supercruise fighters

Prompted by the extensive experience obtained with vortex lift-generating leading edges in the SR-71, Concorde and F-16 supersonic aircraft, development efforts have recently been made toward the use of variable incidence angle delta wing leading edge 'vortex flaps' for supersonic cruise and maneuvering performance improvements in fighter aircraft. Vortex lift flaps have been wind tunnel tested on scale models, and it has been noted that a variety of effects can be obtained through the use of folding, hinged, and tabbed flap designs. Flap planforms can, moreover, be varied in length and in total area, as well as segmented, to yield unique combinations of drag reduction, vortex generation, longitudinal stability, and vortex flow reattachment. It is speculated that the vortex flap may be applicable to multimission fighters, and promote STOL performance.

Lamar, J. E.↗
NASA NTRS1993

Research and training activities of the Joint Institute for Aeronautics and Acoustics

During the period October 1992 to September 1993 progress was made on each of the following tasks: (1) experimental studies of free shear flows; (2) analysis of conical flow; (3) experimental and theoretical studies of vortex flows; and (4) aircraft attitude control using active flow control devices. The details of this work was discussed with the technical and management staff at Ames Research Center.

Roberts, L.↗
NASA NTRS1979

Control of forebody three-dimensional flow separations

Some experiments involving the development of the turbulent symmetric vortex flow about the lee side of a 5 deg semiangle conical forebody at high relative incidence are discussed. The cone was immersed in a Mach 0.6 airstream at a Reynolds number of 13.5 million based on the 1.4 - m axial length of the cone. Novel means of controlling the degree of asymmetry using blowing very close to the nose were investigated. Small amounts of air injected normally or tangentially to the cone surface, but on one side of the leeward meridian and beneath the vortex farthest from the wall, were effective in biasing the asymmetry. With this reorientation of the forebody vortices, the amplitude of the side force could be reduced to the point where its direction was reversed. This phenomenon could be obtained either by changing the blowing rate at constant incidence or by changing incidence at constant blowing rate. Normal injection was more effective than tangential injection. An organized and stable flow structure emerged with the jet vortices positioned above the forebody vortices.

Peake, D. J.↗
NASA NTRS1975

Influence of grazing flow on duct wall normal impedances

A theory is developed for evaluating the normal impedance of an orifice connecting a cylindrical cavity to a flow duct. The impedance of a piston velocity source at the orifice is calculated in terms of the cavity modes which are modified by the presence of a vortex flow. The strength of the vortex is related to the mean flow in the duct. Results are presented showing the variation of the normal impedance spectrum with the cavity vortex. The trends of these variations are confirmed by comparison with measurements.

Mungur, P.↗
NASA NTRS1984

Random vortex method for combusting flows

The random vortex method (RVM) of Chorin was developed by the recirculating flows. The RVM method models turbulence from first principles, tracking the vorticity and obtaining the interaction of vorticity with the bulk flow field. A computer program was produced called MIMOC, Modeling the Interface Motion of Combustion, which can be used to calculate the reacting flow field behind a rearward facing step. Several comparisons between experimental data and calculations were made. The RVM methood computes qualitatively good results, but the quantitative agreement as yet is not completely satisfactory. Much of the difficulty may be caused by the treatment of boundary conditions and the techniques used for obtaining statistical averages of velocities and turbulence quantities. For the rearward facing step the computed reattachment length equals the experimental value. However, the reverse velocity in the recirculation zone is over predicted by 300 percent. In the calculations, a uniform entrance velocity was assumed with no boundary layer at the step lip. This high velocity may be overdriving the reverse flow region.

Marek, C. J.↗
NASA NTRS1973

Hypersonic aerodynamic characteristics of an all-body research aircraft configuration

An experimental investigation was conducted at Mach 6 to determine the hypersonic aerodynamic characteristics of an all-body, delta-planform, hypersonic research aircraft (HYFAC configuration). The aerodynamic characteristics were obtained at Reynolds numbers based on model length of 2.84 million and 10.5 million and over an angle-of-attack range from minus 4 deg to 20 deg. The experimental results show that the HYFAC configuration is longitudinally stable and can be trimmed over the range of test conditions. The configuration had a small degree of directional stability over the angle-of-attack range and positive effective dihedral at angles of attack greater than 2 deg. Addition of canards caused a decrease in longitudinal stability and an increase in directional stability. Oil-flow studies revealed extensive areas of separated and vortex flow on the fuselage lee surface. A limited comparison of wind-tunnel data with several hypersonic approximations indicated that, except for the directional stability, the tangent-cone method gave adequate agreement at control settings between 5 deg and minus 5 deg and positive lift coefficient. A limited comparison indicated that the HYFAC configuration had greater longitudinal stability than an elliptical-cross-section configuration, but a lower maximum lift-drag ratio.

Clark, L. E.↗
NASA NTRS1982

Study of highly sweptback wings by the free vortex sheet method

The aerodynamic characteristics of highly sweptback wings with separations induced vortex flows have been numerically investigated using the free vortex sheet method, developed by Boeing Company, under a contract with NASA/Langley Research Center. The models studied included delta and straked wings, and wings with leading edge extensions. Also, PAN-AIR code has been used to design a fixed leading edge extension into a thick delta wing. The theoretical results predicted have been compared with the experimental data wherever available, and the code capabilities and limitations explored. New fuselage effects also have been considered in some cases.

C Subba Reddy↗
NASA NTRS1993

Preliminary design of an intermittent smoke flow visualization system

A prototype intermittent flow visualization system that was designed to study vortex flow field dynamics has been constructed and tested through its ground test phase. It produces discrete pulses of dense white smoke consisting of particles of terephthalic acid by the pulsing action of a fast-acting three-way valve. The trajectories of the smoke pulses can be tracked by a video imaging system without intruding in the flow around in flight. Two methods of pulsing the smoke were examined. The simplest and safest approach is to simply divert the smoke between the two outlet ports on the valve; this approach should be particularly effective if it were desired to inject smoke at two locations during the same test event. The second approach involves closing off one of the outlet ports to momentarily block the flow. The second approach requires careful control of valve dwell times to avoid excessive pressure buildup within the cartridge container. This method also increases the velocity of the smoke injected into the flow. The flow of the smoke has been blocked for periods ranging from 30 to 80 milliseconds, depending on the system volume and the length of time the valve is allowed to remain open between valve closings.

Ward, Donald T.↗