Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Trains”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Low Power Hardware-In-The-Loop Neuromorphic Training Accelerator

The training process for spiking neural networks can be very computationally intensive. Approaches such as evolutionary algorithms may require evaluating thousands or millions of candidate solutions. In this work, we propose using neuromorphic cores implemented on a Xilinx Zynq system on chip to accelerate and improve the energy efficiency of the evaluation step of an evolutionary training approach. We demonstrate this can significantly reduce the required energy to evolve a network with some cases showing greater than 10 times improvement as compared to a CPU-only system.

Mitchell, Parker↗
DOE OSTI2021

Training Spiking Neural Networks with Synaptic Plasticity under Integer Representation

Neuromorphic computing is emerging as a promising Beyond Moore computing paradigm that employs event-triggered computation and non-von Neumann hardware. Spike Timing Dependent Plasticity (STDP) is a well-known bio-inspired learning rule that relies on activities of locally connected neurons to adjust the weights of their respective synapses. In this work, we analyze a basic STDP rule and its sensitivity on the different hyperparameters for training spiking neural networks (SNNs) with supervision, customized for a neuromorphic hardware implementation with integer weights. We compare the classification performance on four UCI datasets (iris, wine, breast cancer and digits) that depict varying levels of complexity. We perform a search for optimal set of hyperparameters using both grid search and Bayesian optimization. Through the use of Bayesian optimization, we show the general trends in hyperparameter sensitivity in SNN classification problem. With the best sets of hyperparameters, we achieve accuracies comparable to some of the best performing SNNs on these four datasets. With a highly optimized supervised STDP rule we show that these accuracies can be achieved with just 20 epochs of training.

Kulkarni, Shruti↗
DOE OSTI2023

Software-Hardware Co-design of Heterogeneous SmartNIC System for Recommendation Models Inference and Training

Deep Learning Recommendation Models (DLRMs) are critical applications in various domains and have evolved as one of the single largest machine learning applications. Trillions of DLRM parameters exceed the on-chip memory capacity of GPUs. Large-scale multi-node systems are required for distributed DLRM inference and training, which suffer from the all-to-all communication bottleneck, mainly limiting the scalability of ever-growing DLRMs. In recent years, SmartNICs have evolved with coupled computation and communication capabilities providing opportunities for a powerful heterogeneous device in the system. However, there isn't such a distributed system that fully leverages the abundant smartNIC resources that resolve the scalability issue of DLRMs. In this work, we proposed a software-hardware co-design of a heterogeneous smartNIC system that resolves the communication bottleneck of distributed DLRMs, mitigates the memory bandwidth pressure, and improves computation efficiency. We provide a set of smartNIC designs of cache systems (including local cache and remote cache) and smartNIC computation kernels which reduce data movement, relieve memory lookup intensity, and improve the GPU's computation efficiency. In addition, we propose a graph algorithm that improves the data locality of queries within batches which optimizes the overall system performance with higher data reuse. Our evaluation shows that our system achieves 2.1x latency speedup for inference and 1.6x throughput speedup for training.

Guo, Anqi↗
DOE OSTI2023

FORGE: Pre-Training Open Foundation Models for Science

Large language models (LLMs) are poised to revolutionize the way we conduct scientific research. However, both model complexity and pre-training cost are impeding effective adoption for the wider science community. Identifying suitable scientific use cases, finding the optimal balance between model and data sizes, and scaling up model training are among the most pressing issues that need to be addressed. In this study, we provide practical solutions for building and using LLM-based foundation models targeting scientific research use cases. We present an end-to-end examination of the effectiveness of LLMs in scientific research, including their scaling behavior and computational requirements on Frontier, the first Exascale supercomputer. We have also developed for release to the scientific community a suite of open foundation models called FORGE with up to 26B parameters using 257B tokens from over 200M scientific articles, with performance either on par or superior to other state-of-the-art comparable models. We have demonstrated the use and effectiveness of FORGE on scientific downstream tasks. Our research establishes best practices that can be applied across various fields to take advantage of LLMs for scientific discovery.

Yin, Junqi↗
DOE OSTI2021

Sequential Training ToolKit - STTK

Sequential Training ToolKit, or STTK, is a software toolkit plugin for the Unity development platform that enables software developers to easily develop structured Sequential Training applications for gaming and extended reality (XR) environments. STTK is architected to easily import the toolkit as a plugin for the Unity platform and then interact with the graphical user interface (GUI) for drag-and-drop functionality. STTK also includes easy add-on plugins for Prefabs and auto-builds a State Machine. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. SAND2021-3059 O

Klein, BrandonThorin↗
DOE OSTI2021

Multilevel Training of Neural Networks

MTNN is a software library for applying multilevel algorithms on training neural networks. Based on PyTorch, it is designed to be an extensible framework to enable researchers to implement multilevel training algorithms on a variety of neural network models. This release includes a culmination of preliminary work in applying the multilevel Full Approximation Scheme technique on fully connected and convolutional neural networks to solve PDE problems (pending publication submission).

Li, Ruipeng↗
DOE OSTI2024

Two-Step Hyperparameter Optimization Method: Accelerating Hyperparameter Search by Using a Fraction of a Training Dataset

Abstract Hyperparameter optimization (HPO) is an important step in machine learning (ML) model development, but common practices are archaic—primarily relying on manual or grid searches. This is partly because adopting advanced HPO algorithms introduces added complexity to the workflow, leading to longer computation times. This poses a notable challenge to ML applications, as suboptimal hyperparameter selections curtail the potential of ML model performance, ultimately obstructing the full exploitation of ML techniques. In this article, we present a two-step HPO method as a strategic solution to curbing computational demands and wait times, gleaned from practical experiences in applied ML parameterization work. The initial phase involves a preliminary evaluation of hyperparameters on a small subset of the training dataset, followed by a reevaluation of the top-performing candidate models postretraining with the entire training dataset. This two-step HPO method is universally applicable across HPO search algorithms, and we argue it has attractive efficiency gains. As a case study, we present our recent application of the two-step HPO method to the development of neural network emulators for aerosol activation. Although our primary use case is a data-rich limit with many millions of samples, we also find that using up to 0.0025% of the data—a few thousand samples—in the initial step is sufficient to find optimal hyperparameter configurations from much more extensive sampling, achieving up to 135× speedup. The benefits of this method materialize through an assessment of hyperparameters and model performance, revealing the minimal model complexity required to achieve the best performance. The assortment of top-performing models harvested from the HPO process allows us to choose a high-performing model with a low inference cost for efficient use in global climate models (GCMs).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Comparing Designed Training Sets to Optimize Multivariate Regression Models for Pr, Nd, and Nitric Acid Using Spectrophotometry

Chemometric regression models were developed for the quantification of praseodymium (Pr, 0–1000 µg/mL), neodymium (Nd, 0–1000 µg/mL), and nitric acid (HNO 3 , 0.1–5 M) using spectrophotometry. Designed calibration sets were composed of 20 samples each: 10 model points and 10 lack-of-fit (LOF) points. The D-optimal designs effectively minimized the number of samples required to build models, and each design resulted in similar prediction performance, suggesting that statistical design of experiments can provide a reliable framework for selecting training set samples in three-variable systems. Partial least squares regression (PLSR) models were validated against a one-factor-at-a-time validation set composed of 125 samples (three variables, five levels). The top PLS-1 models resulted in average percent root mean square error of prediction error values of 3.5%, 1.7%, and 1.2% for Pr(III), Nd(III), and HNO 3 , respectively. Power set augmentations of the model and LOF samples were investigated to optimize the number of training set samples. PLSR models built using just required model points (10) had similar predictive capabilities as models including the LOF points (20) but with fewer samples. The number of validation samples was also varied systematically to learn how many samples are needed to validate regression models. This work addresses long-standing questions in the field of chemometrics to help make this approach amenable to the near-real-time quantification of hazardous species in remote settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Water4Energy Step-1 Band-M Ready-to-Train Samples for TVA Weeks-to-Years Prediction, Version 0

AI-ready Band-M (monthly) labelled training pack for the Water4Energy Genesis Task-1 project on weeks-to-years prediction of Tennessee Valley temperature and precipitation. The deposit includes leakage-aware issue-time samples (samples_M_v0.nc; N=486), train-only scalers, issue-time split table, supporting monthly panels, and Python generation scripts to recreate the pack from the companion Tier-1 raw observation collection (https://doi.org/10.13139/ORNLNCCS/3398576). Each sample pairs a 12-month lookback of teleconnection indices and SST box anomalies with TVA-mean ERA5 anomaly targets (t2m, tp, msl) at leads 1–3 months.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effectiveness of Deep Learning Trained on SynthCity Data for Urban Point-Cloud Classification

3D object recognition is one of the most popular areas of study in computer vision. Many of the more recent algorithms focus on indoor point clouds, classifying 3D geometric objects, and segmenting outdoor 3D scenes. One of the challenges of the classification pipeline is finding adequate and accurate training data. Hence, this article seeks to evaluate the accuracy of a synthetically generated data set called SynthCity, tested on two mobile laser-scan data sets. Varying levels of noise were applied to the training data to reflect varying levels of noise in different scanners. The chosen deep-learning algorithm was Kernel Point Convolution, a convolutional neural network that uses kernel points in Euclidean space for convolution weights.

Geology↗
DOE OSTI2025

Reference Shapefiles and Pre-trained Random Forest Classification Models for Detecting Aufeis on the North Slope of Alaska in Landsat Imagery

This dataset provides shapefiles and trained machine learning models used for aufeis detection at four sites on the North Slope of Alaska. It includes reference data for evaluating Landsat-based detection methods, supporting research on remote sensing approaches for identifying aufeis. The ReferenceData folder contains ArcGIS shapefiles of semi-automated land cover classifications for 217 Landsat Collection 2 images, categorizing pixels into six classes: aufeis, snow, ground, none, water, and cloud. The SiteBuffers.zip file includes 10-kilometer buffer shapefiles defining regions of interest around four aufeis fields (Canning21, FH1, Firth, and Kuparuk), used to test three detection techniques. Additionally, the TrainedRFModels folder contains six pre-trained Scikit-Learn Random Forest classifiers (100 trees, max depth = 30) designed to predict aufeis presence in Landsat Collection 2 Surface Reflectance images using Red, Blue, SWIR2, NDVI, and NDWI bands. This dataset supports the development and validation of remote sensing methods for mapping aufeis in Arctic environments.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Fissionable Materials Handlers Operators-Initial Training

These courses were designed for all Initial Fissionable Material Handlers Operators and Supervisors whose job activities will require the performance of Fissile Material Operations located within the Plutonium Facility (PF-4). The course requirements are based on DOE order 426.2, Personnel Section, Qualification, and Training Requirements for Fissionable Material Handlers. These courses are required training for all initial Fissionable Material Handlers and is specific to TA-55 FMH Certification. It covers the core areas and topics in Criticality Safety, Material-at-Risk, Nuclear Material Control and Accountability, Radiological Protection, TA-55 Material Handling and Movement.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Illumina Sequencing for SARS-CoV-2 Training [Slides]

This report compiles Wetlab training slides for DTRA sponsored training and has presentations titled: 1) Library Validation Step 2: Bioanalyzer DNA HS Assay, 2) Library Validation Step 3: qPCR, 3) Setting up a MiSeq Run, 4) Sample Prep & Initial QC, 5) Detailed Illumina MiSeq Sequencing, 6) AmpliSeq for Illumina: Best Practices, and 7) Sample/Data Management for SARS-CoV-2 Samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Advanced Energy Design Guide for K-12 School Buildings (AEDG) Training: Cooperative Research and Development Final Report, CRADA Number CRD-18-00761

U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Building Technologies Office (BTO), Commercial Buildings Integration (CBI) Program supports the adoption of zero energy ready buildings design practices through targeted Science, Technology, Engineering, and Mathematics (STEM) workforce development. The National Renewable Energy Laboratory (NREL) identified the opportunity to provided targeted training to those professionals that have the greatest potential to impact adoption and successful design outcomes of zero energy ready buildings projects. In January 2018, ASHRAE released Achieving Zero Energy: Advanced Energy Design Guide for K-12 School Buildings (AEDG). The AEDG was developed in collaboration with NREL, American Institute of Architects (AIA), American Society of Heating, Refrigeration and Air-conditioning Engineers (ASHRAE), U.S. Green Building Council (USGBC), and Illuminating Engineers Society (IES). The purpose of this CRADA was to create a partnership between NREL, AIA, ASHRAE, USGBC, and IES to create and host on-demand, web-based training based on the AEDG.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

New Employee Training Academy Overview [Slides]

Mission statement: Providing new employees with a foundation of excellence, ensuring workers are prepared to contribute to the mission with a thorough understanding of nuclear facility fundamentals, In-depth onboarding and training for ALDWP new hires, Improve the onboarding experience and reduce initial training time while decreasing attrition.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

RCT 4th Quarter 2021 Continuing Training Presentation Transcript

This quarter’s training consists of two parts, viewing this online lecture and completing the associated exercise guide. In this presentation, we will review the different requirements for performing radiation and contamination surveys at LANL and how to document them. The exercise guide is available on UTrain, and was also sent out for the quarterly notification for Continuing Training.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

RCT Continuing Training: 3rd Quarter 2022 Online Presentation

This presentation focuses on "Continuing training for Radiological Control Technicians (RCTs) designed to meet the training requirements of DOE-HDBK-1122-2009." The report contains learning objectives and modules with directions on how to navigate through the modules and course.

61 RADIATION PROTECTION AND DOSIMETRY↗