Development of optical data processing techniques applicable to detection and study of meteor trails
Development of coherent optical data processing techniques applicable to detection of meteor trails and examination of properties
Allen, C. W.↗
SEARCH · Engineering Papers
Results for “TRAILS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pressure distributions on a wing having NACA 4415 airfoil sections with trailing-edge flaps set at 0 deg and 40 deg
Wind tunnel measurements of pressure distributions on wing having NACA 4415 airfoil sections with trailing-edge flaps set at 0 deg and 40 deg
Carter, A. W.↗
Longitudinal aerodynamic characteristics at Mach 1.50 to 4.63 of a missile model employing various canards and a trailing edge flap control
Wind tunnel static longitudinal stability and control characteristics of cruciform delta winged missile with various horizontal canards and trailing-edge flap control between Mach 1.50 and 4.63
Trescot, C. D., Jr.↗
The effect of a drooped wing tip on its trailing vortex system
Drooped wing tip effects on trailing vortex sheet structure and position from spanwise load distribution determination by vortex lattice theory
Mccormick, B. W.↗
An experimental investigation of trailing vortices behind a wing with a vortex dissipator
Trailing vortices behind wing tip with vortex dissipator, using wind tunnel flow visualization and flight tests
Chigier, N.↗
Investigation of an aircraft trailing vortex using a tuft grid
With the increasing capacity of airport terminal areas, and the use of the new large jet transports, it has become important to understand the turbulent wake created by these aircraft. A study of the trailing vortex of a wing has been made using a tuft grid in a 6 foot wind tunnel. The study included an investigation of the use of mass injection at the wing tip as a means of destroying the vortex. Test results show that a fully developed, stable, vortex exists at least a distance of thirty chord lengths downstream of the wing, and that the swirl of the vortex can be reduced or eliminated by mass injection at the wing tip.
Mason, W. H.↗
Prediction of unsteady aerodynamic loadings caused by trailing edge control surface motions in subsonic compressible flow: Analysis and results
A theoretical analysis and a computer program have been developed for the prediction of unsteady lifting surface loadings caused by motions of trailing edge control surfaces having sealed gaps. The final form of the downwash integral equation has been formulated by isolating the singularities from the non-singular terms and establishing a preferred solution process to remove and evaluate the downwash discontinuities in a systematic manner. Comparisons of theoretical and experimental pressure data are made for several control surface configurations. The comparisons indicate that reasonably accurate theoretical pressure distributions and generalized forces may be obtained for a wide variety of control surface configurations. Spanwise symmetry or antisymmetry of motion, and up to four control surfaces on each half span can be accommodated.
Rowe, W. S.↗
Prediction of unsteady aerodynamic loadings caused by trailing edge control surface motions in subsonic compressible flow: Computer program description
A digital computer program has been developed to calculate unsteady loadings caused by motions of lifting surfaces with trailing edge control based on the subsonic kernal function approach. The pressure singularities at hinge line and side edges have been extracted analytically as a preliminary step to solving the integral by collocation. The program calculates generalized aerodynamic forces for user supplied deflection modes. Optional intermediate output includes pressure at an array of points, and sectional generalized forces. From one to four controls on the half span can be accommodated.
Redman, M. C.↗
Prediction of far flow field in trailing vortices.
A finite-difference machine code is brought to bear on the wake-vortex problem in the quasi-cylindrical boundary-layer approximation. A turbulent-energy model containing new features is developed. Parameters of the model are evaluated by comparison of calculated velocities and turbulent intensities with measurements in an axisymmetric wake. Comparisons are made with a previous calculation of the decay of an isolated vortex and with wind tunnel and flight measurements in trailing vortices. A self-similar solution develops at large axial distance that decays with the square root of distance. A slower decay occurs in the preceding transition region.
Baldwin, B. S.↗
Systems simulation for an airport trailing vortex warning system
The approach, development, and limited system studies associated with a system simulation for an Airport Trailing Vortex Warning System are documented. The usefulness is shown of a systems engineering approach to the problem of developing a system, as dictated by aircraft vortices, which will increase air-traffic flow in the takeoff/landing corridors of busy airports while maintaining the required safety factor for each operation. The simulation program has been developed in a modular form which permits new, more sophisticated component models, when they become available and are required, to be incorporated into the program with a minimum of program modifications. This report documents a limited system study that has been performed using this Total System Simulation Model. The resulting preliminary system requirements, conclusions, and recommendations are given.
Jeffreys, H. B.↗
Steady, subsonic, lifting surface theory for wings with swept, partial span, trailing edge control surfaces
A method for computing the lifting pressure distribution on a wing with partial span, swept control surfaces is presented. This method is valid within the framework of linearized, steady, potential flow theory and consists of using conventional lifting surface theory in conjuction with a flap pressure mode. The cause of a numerical instability that can occur during the quadrature of the flap pressure mode is discussed, and an efficient technique to eliminate the instability is derived. This technique is valid for both the flap pressure mode and regular pressure modes and could be used to improve existing lifting surface methods. Examples of the use of the flap pressure mode and comparisons among this method, other theoretical methods, and experiments are given. Discrepancies with experiment are indicated and candidate causes are presented. It is concluded that the method can lead to an efficient and accurate solution of the mathematical problem when a partial span, trailing edge flap is involved.
Medan, R. T.↗
A flight investigation of the trailing vortices generated by a jumbo jet transport
A flight investigation has been conducted to study the velocity and persistence characteristics of the trailing vortices generated by a jumbo jet transport. The investigation showed that the tangential velocities were initially higher for vortices generated with the flaps up and that they persisted for longer distances behind the aircraft than those generated with the flaps down. The core radii with flaps down appeared to be generally larger than those with flaps up. The vertical locations of the vortices behind the generating aircraft varied from several hundred meters below the generating aircraft flight path at long ranges up to, and occasionally above, the flight path at short and moderate ranges.
Verstynen, H. A., Jr.↗
Subsonic wind-tunnel tests of a trailing-cone device for calibrating aircraft static pressure systems
A trailing-cone device for calibrating aircraft static-pressure systems was tested in a transonic wind tunnel to investigate the pressure-sensing characteristics of the device including effects of several configuration changes. The tests were conducted at Mach numbers from 0.30 to 0.95 with Reynolds numbers from (0.9 x one million to 4.1 x one million per foot). The results of these tests indicated that the pressures sensed by the device changed slightly but consistently as the distance between the device pressure orifices and cone was varied from 4 to 10 cone diameters. Differences between such device-indicated pressures and free-stream static pressure were small, however, and corresponded to Mach number differences of less than 0.001 for device configurations with pressure orifices located 5 or 6 cone diameters ahead of the cone. Differences between device-indicated and free-stream static pressures were not greatly influenced by a protection skid at the downstream end of the pressure tube of the device nor by a 2-to-1 change in test Reynolds number.
Jordan, F. L., Jr.↗
The application of laser Doppler velocimetry to trailing vortex definition and alleviation
A laser Doppler velocimeter whose focal volume can be rapidly traversed through a flowfield has been used to overcome the problem introduced by excursions of the central vortex filament within a wind tunnel test section. The basic concepts of operation of the instrument are reviewed and data are presented which accurately define the trailing vortex from a square-tipped rectangular wing. Measured axial and tangential velocity distributions are given, both with and without a vortex dissipator panel installed at the wing tip. From the experimental data, circulation and vorticity distributions are obtained and the effect of turbulence injection into the vortex structure is discussed.
Orloff, K. L.↗
Laser Doppler velocimeter investigation of trailing vortices behind a semi-span swept wing in a landing configuration
Measured axial and tangential velocity profiles in the near wake vortices of a semi-span model of the Convair 990 wing in the NASA-Ames 7- by 10-foot wind tunnel are presented. A scanning laser Doppler velocimeter was used to obtain data at two different downstream stations (0.49 and 1.25 wing spans) at various angles of attack and configurations from wing alone to wing plus nacelles, anti-shock bodies, and flaps deflected 27 deg (landing configuration). It is shown that the velocity distributions within the wake are quite sensitive to span loading. Specifically, it is illustrated that an aircraft flying at given lift coefficient (C SUB L), can substantially reduce its trailing vortex upset potential by deploying its flaps and altering its flight attitude to maintain the same C SUB L. This might be taken into consideration along with performance and noise considerations in the selection of aircraft approach lift over drag.
Ciffone, D. L.↗
A Study of Trailing Edge Blowing as a Means of Reducing Noise Generated by the Interaction of Flow with a Surface
A system for reducing the noise generated when a jet impinges against a flap is described. The eddies formed by the alternate zones of positive and negative pressure on the flap surface are identified as the sound source. In the proposed concept, a stream of low velocity secondary air is ejected from a slot near the trailing edge of the flap as a buffer between the flap and the primary air jet to reduce the intensity of the fluctuating surface pressure field near the flap edge and thus reduce the intensity of the aerodynamic noise.
Scharton, T. D.↗
Evaluation of effectiveness of various devices for attenuation of trailing vortices based on model tests in a large towing basin
The effectiveness of various candidate aircraft-wing devices for attenuation of trailing vortices generated by large aircraft is evaluated on basis of results of experiments conducted with a 0.03-scale model of a Boeing 747 transport aircraft using a technique developed at the HYDRONAUTICS Ship Model Basin. Emphasis is on the effects produced by these devices in the far-field (up to 8 kilometers downstream of full-scale generating aircraft) where the unaltered vortex-wakes could still be hazardous to small following aircraft. The evaluation is based primarily on quantitative measurements of the respective vortex velocity distributions made by means of hot-film probe traverses in a transverse plane at selected stations downstream. The effects of these altered wakes on rolling moment induced on a small following aircraft are also studied using a modified lifting-surface theory with a synthesized Gates Learjet as a typical example. Lift and drag measurements concurrently obtained in the model tests are used to appraise the effects of each device investigated on the performance characteristics of the generating aircraft.
Kirkman, K. L.↗
Performance of a short annular dump diffuser using wall trailing-edge suction
A short annular dump (abrupt flow area change) diffuser was tested with suction through wall trailing-edge slots at inlet Mach numbers of 0.19 and 0.27 and at near ambient inlet temperature and pressure, with suction flow varied from zero to 10 percent of the inlet air mass-flow rate. The overall ratio of diffuser exit area to inlet area was 4.0, and the ratio of length to inlet height was 2.0. By applying suction flow separately on either wall or to both walls simultaneously, the original annular jet profile could be altered to either a hub- or tip-biased profile. Diffuser effectiveness was increased from about 25 percent with no suction to 50 percent at 6 percent outer-wall suction and to 52 percent at a combined suction rate on both walls of 10.25 percent. At the same time, diffuser total pressure loss was reduced by one-fourth.
Juhasz, A. J.↗